Earnings release
Page 1
31 July 2026 ASX:CMM ACTIVITIES REPORT JUNE 2026 QUARTER 1 KGP OPERATIONS • Karlawinda Gold Project (KGP) delivered June 2026 quarter (Q4) gold production of 30,437 ounces (Q3: 30,358oz) at an all-in-sustaining cost (AISC) of $1,648 per ounce (Q3: $1,617 per ounce). • Record annual gold production of 123,589 ounces at AISC of $1,629 per ounce. • FY27 gold production guidance of 137,000 – 147,000 ounces (an 18.3% increase at the midpoint of FY26 guidance) at AISC of A$1,900 - $2, 100 per ounce with growth capital of $70 - $85 million as mining at KEP transitions into operations and plant commissioning expected in the current quarter. • FY27 production guidance reflects an expectation that KGP will broadly operate at the post expansion long term run rate of 150,000 ounces per annum for the last three quarters after commissioning in Q1. • Quarterly cash flow from operations of $115.8 million generated in Q4 (Q3: $143.1m). • Total material movement continues to meet the construction and Q1 FY27 production requirements for the Karlawinda Expansion Project (KEP) with 4.2 million BCM mined in the quarter. • Consistent mill performance continued wi th throughput of 1.15mt (Q3: 1.09mt). CORPORATE • Cash and gold on hand at the end of Q4 was $507.0 m illion (Q3: $507.6m). The underlying cash build for the quarter was $68.2 million (Q3: $100.2m) before total capital expenditure of $46.0 million at the KEP ($44.8m) and MGGP ($1.2m), and the maiden dividend payment of $22.8 million. • Gold sales of 34,271 ounces at an average price of $6,267 per ounce generated $214.8 million in revenue with a further 374 ounces of gold on hand at the end of Q4 valued at $2.2 million (Q3: $27.8m). KEP DEVELOPMENT • The expansion project continued to advance on schedule, with on-site construction activities now transitioning to commissioning in the current quarter; • Concrete works in the plant site are now complete; • All plant structural steel and platework is now on site; • Structural, Mechanical and Piping (SMP) installation si gnificantly advanced in crushing, milling and CIL areas; • Commissioning of CIL areas is underway; • TSF 2 pipework is complete; • All E&I packages are on site; and • All mechanical equipment packages are on site. MGGP DEVELOPMENT • The mining services agreement with MACA was executed in the quarter and mine design, mobilisation, recruitment and early works planning is ongoing; • Power supply contract evaluation is nearing completion; • During the period, the key plant construction scopes we re tendered with MACA Interquip being awarded the main plant construction scope; • Capricorn received the Approval Decision from the fe deral Minister’s delegate, approving the expansion and operation of the MGGP under the Environment Protection and Biodiversity Conservation Act 1999 (Cth); and • With the required federal permits now to hand, Capricorn has also finalised and submitted the Environmental Review Document (ERD) for the Part 4, Western Australian Government assessment process with EPA Services, ahead of the upcoming public review phase. This submission incorporated outcomes from the Federal Department of Climate Change, Energy, the Environment and Water (DCCEEW) approvals. • Capricorn is targeting (subject to completion of permitting) commencement of development activities at MGGP in the December 2026 quarter.
Page 2
2 EXPLORATION Exploration drilling during the quarter delivered strong high-grade results across the Mt Gibson Gold Project, with continued depth and strike extensions at both the Orion South and Lexington-Hornet underground systems. Near- surface high-grade intercepts were also returned from the broader Mt Gibson open pit trend. At Golden Range, drilling extended high-grade mineralisation at Rothschild and returned broad gold-antimony intercepts at Ricciardo. Regional exploration at Karlawinda continued to target gravity highs and IOCG vectors along prospective structural corridors. • Significant results from resource and exploration drilling across the Mt Gibson, Karlawinda and Warriedar tenure for the quarter include: o Orion South UG 9.1 metres @ 5.05 g/t from 576.94 to 586m 14.5 metres @ 3.45 g /t from 402.4 to 416.9m o Lexington - Hornet UG 13.1 metres @ 13.93 g/t from 714.9 to 728m 27.5 metres @ 3.24 g /t from 438.7 to 466.2m o MGGP Open Pit Trend 15 metres @ 14.61 g/t from 181 to 196m 5 metres @ 19.42 g/t from 109 to 114m o Ricciardo Gold & Antimony - (Golden Range) 24.0m @ 5.24 g/t Au & 0.34% Sb (5.96 g/t AuEq) from 522m 31.0m @ 2.29 g/t Au & 0.06% Sb (2.41 g/t AuEq) from 215m o Rothschild - (Golden Range) 19 metres @ 4.38 g/t from 239 to 258m 18 metres @ 4.48 g/t from 256 to 274m o Karlawinda Regional 4 metres @ 7.24 g/t from 128 to 132m 4 metres @ 4.18 g/t from 108 to 112m Orion South long section looking west, with +1600m of prospective strike, current +25-gram metre intercepts displayed in yellow. These results will be included in an update to the Orion South underground MRE.
Page 3
3 JUNE 2026 QUARTER ACTIVITIES SUMMARY Capricorn Metals Ltd (Capricorn) wholly owns the operating Karlawinda Gold Project (KGP) located 65 kilometres south-east of Newman in the Pilbara region of Western Australia and the Mt Gibson Gold Project (MGGP) located 65 kilometres north-east of Wubin in the Mid-West region of Western Australia. Karlawinda Gold Project The KGP delivered another strong quarter of operations, producing 30,437 ounces of gold. This result brings year to date production to 123,589 ounces, achieving the upper end of the FY26 guidance range of 115,000 – 125,000 ounces. The sustained expanded mine production rate allowed Capricorn to achieve the guidance gold production whilst also delivering the development requirements of the Karlawinda Expansion Project (KEP). Mining production rates have stabilised at the expanded run rate for the KEP over the full year, with ore placed on KEP ROM 2 ahead of commissioning activities commencing. Mill performance re mained consistent with th roughput of 1,146kt of predominantly fresh ore. Cash costs before royalties for the quarter were $1,251 per ounce, with an AISC of $1,648 per ounce. AISC for FY26 was $1,629 per ounce. This was impacted by a st ronger than assumed gold price environment which has positively supported revenue while increasing annual royalty payments by ~$100/oz relative to guidance assumptions. The KEP capital development is advancing rapidly to commissioning in Q1 FY27 and accordingly associated expenditures will complete in H1 FY27. On completion of the KEP the accelerated mining rates which have been required for the last 12 months will be reflected in a life of mine gold production rate increasing from around 120,000 ounces per annum to around 150,000 ounces per annum. Capricorn looks forward to the completion of this exciting project and the optimisation of mining to the increased production run rate that is reflected in the FY27 production and cost guidance outlined below. Operating results for the KGP for Q4 were as follows: Unit Jun26Q Mar26Q Dec25Q Sep25Q Operations Ore mined BCM (‘000) 552 482 454 430 Waste mined BCM (‘000) 2,810 3,169 3,076 2,866 Pre-strip mined BCM (‘000) 791 45 836 1,216 Operating stripping ratio w:o 5.1 6.6 6.8 6.7 Total stripping ratio w:o 6.5 6.7 8.6 9.5 Ore mined t (‘000) 1,493 1,272 1,239 1,214 Ore milled t (‘000) 1,146 1,092 1,159 1,228 Head Grade g/t 0.91 0.95 0.91 0.91 Recovery % 91.2 91.0 89.9 90.3 Gold production Oz 30,437 30,358 30,476 32,318 Financial Net cash cost A$/oz 1,251 1,249 1,262 1,353 All-in sustaining cost A$/oz 1,648 1,617 1,627 1,625 Net Cash costs and AISC calculated on a per ounce production basis.
Page 4
4 Mining Open pit material mined continued at the expanded project run rate with 4.2 million BCM’s mined, allowing Capricorn to achieve both strong quarterly gold produc tion and the development production requirements of the KEP. The mining operations advanced the planned pit face positions to deliver budget gold production while also delivering the required pre-stripping and infrastructure materials for the expansion project, including ore delivery to KEP ROM 2. Mining production rates have continued at the expanded project run rate for the KEP, with expanded mill feed and production rates taking effect in Q1FY27. The total stripping ratio for the quarter was 6.5 (w:o) co mpared to 6.7 in Q2, while the operating stripping ratio stabilised at 5.1 (w:o) compared to 6.6 in Q3. A total of 1.5 million tonnes of ore was mined during the quarter, with ore stocks increasing to 7.7 million tonnes. Karlawinda Gold Project – Southern Corridor (foreground) and Bibra (background) open pits (June 2026). Processing Consistent performance at the KGP processing plant conti nued in the quarter, with 1.15 million tonnes of ore processed at a head grade of 0.91g/t (Q3: 0.95g/t). Gold recovery remained steady at 91.2%. Operational Outlook Mining production rates are expected to remain at similar levels for the coming quarter with a continued emphasis on pre-stripping to expose ore feed for the KEP in the Southern Corridor and Berwick pits. With ROM 2 now complete, an increase in ore delivery can be facilitated ahead of the KEP commissioning phase in Q1 FY27. FY27 Guidance Gold production guidance for FY27 is 137,000 – 147,000 ounces, an 18.3% increase at the midpoint to FY26 production guidance. The gold production rate is forecast to increase from around 120,000 ounces per annum to around 150,000 ounces per annum following commissioning of the KEP in Q1 FY27. FY27 production guidance reflects an expectation that KGP will broadly operate at the post expansion long term run rate of 150,000 ounces per annum for the last three quarters after commissioning in Q1 AISC is expected to be in the guidance range of A$1, 900 - $2,100 per ounce with growth capital of $70 - $85 million as mining at KEP transitions into operations. The increase in AISC is partly driven by increasing the gold price in reserve optimisations from $2,200/oz to $2,600/oz, driving inclusion in the ORE of lower grade but strongly economic ore. This has underpinned the retention of a mine life of over a decade at the post expansion life of mine production rate of 150,000 ounces per annum. Growth capital primarily reflects the acceleration of pre- stripping activities as part of the expanded project reserves – see ASX release dated 27 July 2026.
Page 5
5 Corporate Cash and Bullion and Gold Sales During the quarter, Capricorn sold a total of 34,271 ounces achieving an average gold price of $6,267 per ounce generating revenue of $214.8 million. At the end of the quarter, the Company had 374 ounces (Q3: 4,112oz) of gold on hand valued at $2.2 million. The KGP generated strong operating cash flow of $115.8 million for the quarter (Q3: $143.1 million). The Company’s cash and gold on hand at 30 June 2026 was $507.0 million (Mar26: $507.6m). The underlying cash build for the quarter was $68.2 million (Q3: $100.2m) before total capital expenditure of $46.0 million at the KEP ($44.8m) and MGGP ($1.2m), and the maiden dividend payment of $22.8 million. The Company’s net cash and bullion position at the end of Q4 is $507.0 million (Q3: $507.6 million). (i) Sales revenue includes $0.4m attributable to silver sales during the quarter. Payments to Related Parties During the quarter, payments to related parties of Capricorn and their associates (being the Company’s directors) totalled $488,750. The payments were remuneration for their roles including superannuation.
Page 6
6 Development Karlawinda Expansion Project Significant development activities continued on the expansion of the Karlawinda Gold Project as the project nears completion. The expansion incorporates the installation of a new parallel three-stage crushing and ball milling circuit (replicating current) to increase total processing capacity to 6.5Mtpa. The average annual gold production from the expanded KGP is expected to be in the order of 150,000 ounces. The parallel processing stream offers the flexibility of an independent run-of-mine (ROM) arrangement while maximising the use of existing infrastructure downstream of the CIL tanks. Simplified Karlawinda Processing Plant Flow Sheet. Development activities at the KEP have progressed on schedule towards planned commissioning in the current quarter, with progress made in Q4 summarised as follows: • Concrete works in the plan t site are now completed; • All plant structural steel and platework is now on site; • Structural, Mechanical and Piping (SMP) installati on are significantly advanced in crushing, milling and CIL areas; • Commissioning of CIL areas is underway; • TSF 2 pipework is complete; • All E&I packages are on site; and • All mechanical equipment packages were delivered to site; • Ore is accumulating on ROM 2 ahead of commissioning the mill and crusher this quarter.
Page 7
7 Karlawinda Expansion Project – CIL circuit extension with top of tank steel sections in place. Karlawinda Expansion Project – Primary/Secondary/Tertiary crusher building and ROM 2.
Page 8
8 Karlawinda Expansion Project – Mill area nearing completion. Karlawinda Expansion Project – ROM 2.
Page 9
9 Mt Gibson Gold Project Progress continues to be made on development and permi tting for MGGP in parallel with continued exploration and resource extension drilling. As announced to the ASX on 30 June 2026, the Company received the approval required from the Commonwealth Department of Climate Change, Energy, the Environment and Water (DCCEEW) for the expansion and operation of the MGGP pursuant to the Environment Protection and Biodiversity Conservation Act 1999 (Cth) (EPBC Act). This decision by the Minister’s Delegate approves the operation of the project subject to specified conditions relating to listed environmental species and communities. Importantly, this approval now allows Capricorn to finalise the primary Western Australian approvals required for the MGGP under Part IV of the Environmental Protection Act 1986 (WA) (EP Act). The Company has now submitted its Environmental Review Document (ERD) to facilitate the final process towards State approvals. The receipt of Federal approval of the project is a si gnificant development process milestone for Capricorn and gives the Company confidence to advance further long lead capital purchasing and contract execution in parallel with concluding the WA permitting process. During the quarter, the mining services agreement with MACA was executed, with mine design, mobilisation, recruitment and early works planning ongoing. Mobilisation planning and surveys, early clearing design and early works infrastructure procurement works continued. Power supply contract evaluation continued in the quarter and is nearing completion. The key plant construction scopes were tendered, with MACA Interquip being awarded the main plant construction scope. The Company is targeting, subject to completion of permitting, commencement of development activities at MGGP in the December 2026 quarter. The time invested to date in detailed project design, equipment selection, along with construction and operating contracts should contribute to a very efficient ramp up of development activities and opportunities for compression of the development schedule.
Page 10
10 Exploration Update Mt Gibson Gold Project Exploration activities continue at an expedited rate, with 4 rigs active at Mt Gibson at the end of quarter, delivering 51,303 metres from 156 holes in the period, focussing on extending and infilling the Orion South Underground, broader Open Pit deposits, advancing the Lexington underground prospect and commencement of drilling at Hornet. Lexington – Hornet Underground Drilling at Lexington and Hornet continued to intersec t significant high-grade mineralisation well below current reserve pit designs, confirming substantial depth and stri ke extensions. A total of 21,617 metres (36 holes) of combined diamond and RC drilling was completed during the quarter and will support a potential maiden Inferred underground Mineral Resource Estimate . The system remains open in all directions. Drilling is ongoing with multiple rigs active. Best results for the quarter include: • 13.1 metres @ 13.93 g/t from 714.9 to 728m • 27.5 metres @ 3.24 g/t from 438.7 to 466.2m • 35.2 metres @ 2.31 g/t from 350 to 385.2m • 20.2 metres @ 4.00 g/t from 464 to 484.2m • 23.91 metres @ 3.32 g/t from 724.09 to 748m • 12 .94 metres @ 5.49 g/t from 382.06 to 395m • 11.8 metres @ 5.64 g/t from 681 to 692.8m • 27 metres @ 2.09 g/t from 367 to 394m Above intercepts for Lexington Domain underground include a minimum of 1g/t Au over a minimum length of 1m with a maximum 5.5m length of consecutive internal waste. No upper cuts have been applied. The long section illustrates the high-grade zones defined by drilling beneath the Orion North pit. Lexington long section showing high-grade mineralisation extending below current reserve pit designs, with the system remaining open in all directions.
Page 11
11 Orion South Underground Resource drilling at Orion South continued to return broad, high-grade gold intercepts, confirming good continuity and extensions at depth. A total of 15 ,660 metres (31 holes) of diamond and RC drilling was completed during the quarter, focused on upgrading Inferred resources to Indicated. Mineralisation remains open at depth and along strike. Results will be incorporated into future updates to the Orion South underground MRE and ORE. Best results for the quarter include: • 9.1 metres @ 5.05 g/t from 576.94 to 586m • 14.5 metres @ 3.45 g/t from 402.4 to 416.9m • 29.39 metres @ 1.71 g/t from 409 to 438.39m • 8.5 metres @ 5.13 g/t from 626 to 634.5m • 7.59 metres @ 5.66 g/t from 470.8 to 478.44m • 3.2 metres @ 12.74 g/t from 641.2 to 644.5m • 4.86 metres @ 8.48 g/t from 431.6 to 436.5m • 1.3 metres @ 28.69 g/t from 664 to 665.3m Above intercepts for Orion Domain underground include a minimum of 1g/t Au value over a minimum length of 1m with a maximum 2m length of consecutive internal waste. No upper cuts have been applied. The long section illustrates the high-grade zones defined by drilling beneath the Orion pit. Orion South long section looking west, with +1600m of prospective strike, current +25-gram metre intercepts displayed in yellow . These results will be included in an update to the Orion South underground MRE. Mt Gibson Open Pit Resource drilling at the Mt Gibson open pit areas was undertaken to define additional near-surface gold mineralisation within and adjacent to existing pit designs. A total of 14,026 metres (89 holes) of RC drilling was completed during the quarter. These results support ongoing mine optimisation and resource growth at MGGP. Best results for the quarter include: • 15 metres @ 14.61 g/t from 181 to 196m • 5 metres @ 19.42 g/t from 109 to 114m • 5 metres @ 14.53 g/t from 60 to 65m • 3 metres @ 13.93 g/t from 133 to 136m • 10 metres @ 4.04 g/t from 86 to 96m • 6 metres @ 6.07 g/t from 114 to 120m Above intercepts for Open Pit trend include a minimum of 0.5g/t Au value over a minimum length of 1m with a maximum 2m length o f consecutive internal waste. No upper cuts have been applied. Regional Exploration During the quarter, 8,729 metres (50 holes) of completing a 10,000-metre RC drill programme at the Rothschild deposit within the newly acquired Fields Find project area. This builds on previous Warriedar drilling results and aims to advance the existing inferred resource of 6 93kt @ 1.4g/t Au for 31.3koz Au. Results from 11 diamond holes (1,834 metres) from Ricciardo (Golden Range) were also received.
Page 12
12 Ricciardo Gold-Antimony (Golden Range) Resource extension drilling at Ricciardo continued to deliver broad gold-antimony mineralisation, extending the system at depth. During the quarter, results from 11 diamond holes (1,834 metres) were received. Mineralisation remains open in multiple directions. Ricciardo is emerging as a significant gold-antimony opportunity within the Golden Range tenure. Best results for the quarter include: • 24.0m @ 5.24 g/t Au & 0.34% Sb (5.96 g/t AuEq) from 522m • 31.0m @ 2.29 g/t Au & 0.06% Sb (2.41 g/t AuEq) from 215m • 21.6m @ 2.94 g/t Au & 0.13% Sb (3.21 g/t AuEq) from 195.4m • 41.0m @ 1.36 g/t Au & 0.06% Sb (1.49 g/t AuEq) from 406m Significant intercepts table of Ricciardo assay drill intersections using a 0.5 g/t AuEq cut-off, with a minimum width of 0.2 m eters and a maximum of 2 meters of consecutive internal waste. Long section through the Ricciardo showing the locations of the intervals reported in this release. Rothschild – (Golden Range) Exploration at Rothschild continued to test extensions of high-grade mineralisation along the 10 km prospective BIF-mafic shear corridor. A total of 8,729 metres (50 holes) of RC drilling was completed during the quarter. Drilling has confirmed high-grade extensions beyond the regional depletion zone. Rothschild remains a high- priority satellite opportunity with potential to grow into a meaningful resource adjacent to Mt Gibson operations. Best results for the quarter include: • 19 metres @ 4.38 g/t from 239 to 258m • 18 metres @ 4.48 g/t from 256 to 274m • 5 metres @ 5.98 g/t from 215 to 220m • 2 metres @ 7.62 g/t from 223 to 225m Above intercepts for regional drilling include a minimum of 0.5g/t Au value over a minimum length of 1m with a maximum 2m lengt h of consecutive internal waste. No upper cuts have been applied.
Page 13
13 Karlawinda Gold Project Study of recently acquired High-resolution Falcon Airborne Gravity Gradiometry (AGG) survey data has underpinned a renewal of targeting methodologies across the wider Karlawinda project, with emphasis on gravity anomalies, IOCG-style vectors and constraints on the known age of mineralisation. Regional Exploration Regional exploration at the Karlawinda Gold Project cont inued to target gravity highs and IOCG vectors along prospective structural corridors in proximity to the Bibra mine. A total of 20,299 metres (80 holes) of RC drilling was completed during the quarter. Best first-pass 4m composite results for the quarter that warrant follow-up drilling include: • 4 metres @ 7.24 g/t from 128 to 132m • 4.00 metres @ 3.06 g/t from 156 to 160m • 4 metres @ 4.18 g/t from 108 to 112m • 4 metres @ 3.13 g/t from 260 to 264m Above intercepts for regional drilling include a minimum of 0.5g/t Au value over a minimum length of 1m with a maximum 2m lengt h of consecutive internal waste. No upper cuts have been applied. Falcon Airborne Gravity Gradiometry (AGG) survey over the Karlawinda project area, highlighting prospective structural corridors and density contrasts along known gold mineralised trends with +2Moz Bibra mine and current drilling location at the Belhaven. This announcement has been authorised for release by the Capricorn Metals Ltd board. For further information, please contact: Mr Mark Clark Executive Chairman E: enquiries@capmet.com.au T: +61 8 9212 4600
Page 14
14 Forward Looking Statements This announcement may contain certain “forward-looking statements” which may not have been based solely on historical facts but rather may be based on the Company’s current expectations about future events and results. Such statements include, but are not limited to, statements with regard to capacity, future production and grades, estimated costs, revenues and reserves, the construction costs of new projects and projected capital expenditures, the outlook for minerals and metals prices and the outlook for economic conditions. These statements may be (but are not necessarily) identified by the use of phrases such as “may”, “might”, “could”, “would”, “will”, “expect”, “intend”, “forecast”, “milestone”, “objective”, “predict”, “plan”, “estimate”, “anticipate”, “believe”, “envisage” or other similar words. Where the Company expresses or implies an expectation of belief as to future events or results, such expectation or belief is expressed in good faith and believed to have a reasonable basis. The detailed reasons for that conclusion are outlined throughout this announcement, and all material assumptions are disclosed. However, such statements are not guarantees of future performance and there can be no assurance that forward- looking statements will prove to be accurate. Forward-looking statements involve subjective judgement and analysis and are subject to risks, uncertainties, contingencies, assumptions and other factors, which could cause actual results to differ materially fr om future results expressed, projected or implied by such forward-looking statements. Such risks include, but are not limited to resource risk, metals price volatility exchange rate volatility, currency and interest fluctuations, general economic conditions, inability to obtain licences or permits or other regulatory approvals, liabilities inherent in mine devel opment and production, competition for amongst other things, capital, acquisition of reserves, undev eloped lands and skilled personne l, political risks, Indigenous Nations engagement, climate risk, natural disasters, geological, mining and processing technical problems, increased production costs and variances in ore grade or recovery rates from those assumed in mining plans, various events which could disrupt operations and/or the transportation of mineral products, including labour stoppages and severe weather conditions, the demand for and availability of transportation services, the ability to secure adequate financing, as well as governmental regulation and judicial outcomes. Many of these risks are outside the control of, change without notice, and may be unknown to the Company. The Company gives no representation, warranty, guarantee or assurance (express or implied) in relation to the information and statements within this announcement. Except for statutory liability which cannot be excluded, the Company, its officers, employees and advisers expressly disclaim any responsibility for the accuracy or completeness of the material contained in this announcement and exclude all liability whatsoever (including negligence) for any loss or damage which may be suffered by any person as a consequence of any information in this announcement or any error or omission therefrom. Readers should also refer to the Company’s Annual Reports and other ASX announcements and should not place undue reliance on forward-looking information. Readers should rely on their own independent enquiries, investigations and advice regarding information contained in this announcement. Any reliance by a reader on the information contained in this announcement is wholly at the reader’s own risk. The forward-looking statements in this announcement relate only to events or information as of the date on which the statements are made. Except as required by law or regulation, the Company accepts no responsibility to update any person regarding any inaccuracy, omission or change in information in this an nouncement or any other information made available to a person, nor any obligation to furnish the person with any further information. Nothing in this announcement will, under any circumstances, create an implication that there has been no change in the affairs of the Company since the date of this announcement. The Company does not undertake any obligation to release publicly any revisions to any “forward-looking statement” to reflect events or circumstances after the date of this announcement, or to reflect the occurrence of unanticipated events, except as may be required under applicable securities laws. Competent Persons Statement The information in this announcement relating to estimates of the Ore Reserves and Mineral Resources for the Karlawinda Gold Project is extracted from the Company’s ASX announcement dated 27 July 2026 entitled “Capricorn Gold Reserves Increase to 5.2 Million Ounces”, which is available to view on the Company’s website on www.capmetals.com.au. The information in this announcement relating to estimates of the Ore Reserves and Mineral Resources for the Mt Gibson Gold Project is extract ed from the Company’s ASX announcement s dated 27 July 2026 entitled “Compelling Mt Gibson PFS Update” , which is available to view on the Co mpany’s website on www.capmetals.com.au.
Page 15
15 The information in this announcement that relates to production targets for Capricorn’s projects (including related forward looking financial information) are extracted from the Company’s ASX announcements dated 29 October 2024 entitled “Karlawinda Gold Projec t Expansion Board Approv ed” and 27 July 2026 entitled “Compelling Mt Gibson PFS Update”, which are available to view on the Company’s website on www.capmetals.com.au. The Company confirms that it is not aware of any new info rmation or data that materially affects the information included in the ASX announceme nts referred to in the paragraphs abo ve and all material assumptions and technical parameters underpinning the estimates, production targets and other forward looking financial information in the relevant market announcements co ntinue to apply and have not materially changed. The Company confirms that the form and context in which the Competent Persons’ findings are presented have not been materially modified from the previous market announcements. The information in this announcement relating to estimates of the Mineral Resources of the Golden Range Project is extracted from the ASX announcement released by Warriedar Resources Limited (ASX: WA8), a wholly owned subsidiary of the Company, dated 28 November 2022 ent itled “Major Gold Project Acquisition” and 5 May 2025 entitled “Ricciardo Project MRE Update”, which is available to view on the ASX’s website on www.asx.com.au. The Company confirms that it is not aware of any new info rmation or data that materially affects the information included in the original market announcement and all material assumptions and technical parameters underpinning the estimates in the relevant market announcement continue to apply and have not materially changed. The Company confirms that the form and cont ext in which the Competent Person’s findings are presented have not been materially modified from the original market announcement. The Competent Person consents remain in place for subsequent release by the Company of the same information in the same form and context, until the consent is wi thdrawn or replaced by a subsequent report and accompanying consent. The information in this report that relates to Exploration Results is based on information compiled or reviewed by Mr. William Higgins who is a full-time employee of the Company. Mr. Higgins is a current Member of the Australian Institute of Geoscientists and has sufficient experience, which is relevant to the style of mineralisation and types of deposit under consideration and to the activities undertaken, to qualify as a Competent Person as defined in the 2012 Edition of the “Australasian Code of Reportin g of Exploration Results, Mineral Resources and Ore Reserves”. Mr. Higgins consents to the inclusion in the report of the matters based on the information in the form and context in which it appears. Gold equivalent (AuEq) calculation methodology Capricorn considers that both gold and antimony included in the gold equivalent calculation (AuEq) have reasonable potential to be recovered at Ricciardo, given current geochemical understanding, geologically analogous mining operations and historical resource estimation. For the purposes of its AuEq calculation methodology, Capricorn considers it appropriate to adopt the gold and antimony prices utilised for Larvotto Resources’ (ASX: LRV) Hillgrove Gold-Antimony Project Pre-Feasibility Study (being US$2,200/oz gold and US$15,000/t antimony) (refer LRV ASX release dated 5 August 2024). An assumed mineral recovery of 90% has been applied in the formula after reviewing the recoveries of typical antimony projects in Australia including Hillgrove and Costerfield [1]. Expected recoveries will be updated once sufficient data has been obtained from future metallurgical study. These assumptions result in a chosen AuEq calculation formula for Ricciardo of: 𝐴𝑢𝐸𝑞 (g/t) = 𝐴𝑢 (𝑔/𝑡) + 2.12 × 𝑆𝑏 (%) This formula is deemed appropriate for use in the initial exploration targeting of gold-antimony mineralisation at Ricciardo and is the same as that used for initial reporting of results at Ricciardo, refer Warriedar Resources Limited (ASX: WA8) ASX release 1 October 2024 entitl ed “Continued Delivery of High Grade An timony at Ricciardo”, which is available on the ASX’s website on www.asx.com.au. In Capricorn’s opinion all the elements included in the metal equivalents calculation have reasonable potential to be recovered and sold. [1] refer Mandalay Resources - Costerfield Property NI 43-101 Technical Report dated 25 March 2022 and LRV ASX release dated 5 August 2024.
Page 16
16 APPENDIX 1 – TENEMENT SCHEDULE Lease Project Company Location Status Percentage Held M52/1070 Karlawinda Greenmount Resources Pty Ltd Western Australia Granted 100% E52/1711 Karlawinda Greenmount Resources Pty Ltd Western Australia Granted 100% E52/2247 Karlawinda Greenmount Resources Pty Ltd Western Australia Granted 100% E52/2398 Karlawinda Greenmount Resources Pty Ltd Western Australia Granted 100% E52/2409 Karlawinda Greenmount Resources Pty Ltd Western Australia Granted 100% E52/3323 Karlawinda Greenmount Resources Pty Ltd Western Australia Granted 100% E52/3363 Karlawinda Greenmount Resources Pty Ltd Western Australia Granted 100% E52/3364 Karlawinda Greenmount Resources Pty Ltd Western Australia Granted 100% E52/3365 Karlawinda Greenmount Resources Pty Ltd Western Australia Granted 100% E52/3366 Karlawinda Greenmount Resources Pty Ltd Western Australia Granted 100% E52/3368 Karlawinda Greenmount Resources Pty Ltd Western Australia Granted 100% E52/3450 Karlawinda Greenmount Resources Pty Ltd Western Australia Granted 100% E52/3474 Karlawinda Greenmount Resources Pty Ltd Western Australia Granted 100% E52/3531 Karlawinda Greenmount Resources Pty Ltd Western Australia Granted 100% E52/3533 Karlawinda Greenmount Resources Pty Ltd Western Australia Granted 100% E52/3541 Karlawinda Greenmount Resources Pty Ltd Western Australia Granted 100% E52/3543 Karlawinda Greenmount Resources Pty Ltd Western Australia Granted 100% E52/3571 Karlawinda Greenmount Resources Pty Ltd Western Australia Granted 100% E52/3656 Karlawinda Greenmount Resources Pty Ltd Western Australia Granted 100% E52/3671 Karlawinda Greenmount Resources Pty Ltd Western Australia Granted 100% E52/3677 Karlawinda Greenmount Resources Pty Ltd Western Australia Granted 100% E52/3729 Karlawinda Greenmount Resources Pty Ltd Western Australia Granted 100% E52/3780 Karlawinda Greenmount Resources Pty Ltd Western Australia Granted 100% E52/3784 Karlawinda Greenmount Resources Pty Ltd Western Australia Granted 100% E52/3797 Karlawinda Greenmount Resources Pty Ltd Western Australia Granted 100% E52/3808 Karlawinda Greenmount Resources Pty Ltd Western Australia Granted 100% E52/3841 Karlawinda Greenmount Resources Pty Ltd Western Australia Granted 100% E52/3884 Karlawinda Greenmount Resources Pty Ltd Western Australia Application 100% E52/3887 Karlawinda Greenmount Resources Pty Ltd Western Australia Granted 100% E52/3888 Karlawinda Greenmount Resources Pty Ltd Western Australia Granted 100% E52/3889 Karlawinda Greenmount Resources Pty Ltd Western Australia Granted 100% E52/3890 Karlawinda Greenmount Resources Pty Ltd Western Australia Granted 100% E52/3932 Karlawinda Greenmount Resources Pty Ltd Western Australia Granted 100% E52/3980 Karlawinda Greenmount Resources Pty Ltd Western Australia Granted 100% E52/3995 Karlawinda Greenmount Resources Pty Ltd Western Australia Granted 100% E52/3996 Karlawinda Greenmount Resources Pty Ltd Western Australia Granted 100% E52/3997 Karlawinda Greenmount Resources Pty Ltd Western Australia Granted 100% E52/4242 Karlawinda Greenmount Resources Pty Ltd Western Australia Granted 100% E52/4243 Karlawinda Greenmount Resources Pty Ltd Western Australia Granted 100% E52/4286 Karlawinda Greenmount Resources Pty Ltd Western Australia Application 100% E52/4445 Karlawinda Greenmount Resources Pty Ltd Western Australia Application 100% E52/4487 Karlawinda Greenmount Resources Pty Ltd Western Australia Application 100% L52/174 Karlawinda Greenmount Resources Pty Ltd Western Australia Granted 100% L52/177 Karlawinda Greenmount Resources Pty Ltd Western Australia Granted 100% L52/178 Karlawinda Greenmount Resources Pty Ltd Western Australia Granted 100% L52/179 Karlawinda Greenmount Resources Pty Ltd Western Australia Granted 100%
Page 17
17 L52/181 Karlawinda Greenmount Resources Pty Ltd Western Australia Granted 100% L52/183 Karlawinda Greenmount Resources Pty Ltd Western Australia Granted 100% L52/189 Karlawinda Greenmount Resources Pty Ltd Western Australia Granted 100% L52/192 Karlawinda Greenmount Resources Pty Ltd Western Australia Granted 100% L52/197 Karlawinda Greenmount Resources Pty Ltd Western Australia Granted 100% L52/223 Karlawinda Greenmount Resources Pty Ltd Western Australia Granted 100% L52/224 Karlawinda Greenmount Resources Pty Ltd Western Australia Granted 100% L52/248 Karlawinda Greenmount Resources Pty Ltd Western Australia Granted 100% M59/328 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% M59/402 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% M59/403 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% M59/404 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% M59/744 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% M59/747 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% M59/772 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% M59/787 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% E59/2079 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% E59/2110 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% E59/2270 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% E59/2402 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% E59/2439 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% E59/2450 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% E59/2594 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% E59/2606 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% E59/2655 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% E59/2670 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% E59/2672 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% E59/2673 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% E59/2751 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% E59/2752 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% E59/2754 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% E59/2755 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% E59/2826 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% E59/2848 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% E59/2880 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% E59/2923 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% E59/2924 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% E59/2958 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% E59/2959 Mt Gibson Crimson Metals Pty Ltd Western Australia Application 100% E59/2960 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% E59/2961 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% E59/2992 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% E59/2993 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% E59/2998 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% E59/2999 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% E59/3000 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% E59/3001 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% E59/3002 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% E59/3005 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% E59/3039 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100%
Page 18
18 E59/3040 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% E59/3041 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% E59/3043 Mt Gibson Crimson Metals Pty Ltd Western Australia Application 100% E59/3073 Mt Gibson Crimson Metals Pty Ltd Western Australia Application 100% E70/5600 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% E70/6332 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% E70/6686 Mt Gibson Crimson Metals Pty Ltd Western Australia Application 100% P59/2286 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% P59/2287 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% P59/2290 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% P59/2291 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% P59/2306 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% P59/2309 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% P59/2310 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% P59/2416 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% P59/2483 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% P59/2484 Mt Gibson Crimson Metals Pty Ltd Western Australia Application 100% P59/2485 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% P59/2486 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% P59/2487 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% P59/2488 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% L59/45 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% L59/46 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% L59/53 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% L59/132 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% L59/138 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% L59/140 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% L59/146 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% L59/147 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% L59/149 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% L59/150 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% L59/177 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% L59/181 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% L59/198 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% L59/224 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% G59/48 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% G59/72 Mt Gibson Crimson Metals Pty Ltd Western Australia Granted 100% E59/1268-I Fields Find DC Mines Pty Ltd Western Australia Granted 100% non-FeO E59/1696 Fields Find Anova Metals WA Pty Ltd Western Australia Granted 100% E59/1723 Fields Find Anova Metals WA Pty Ltd Western Australia Granted 100% E59/1966 Fields Find Anova Metals WA Pty Ltd Western Australia Granted 100% E59/1996-I Fields Find DC Mines Pty Ltd Western Australia Granted 100% non-FeO E59/1997-I Fields Find DC Mines Pty Ltd Western Australia Granted 100% non-FeO E59/2104 Fields Find Anova Metals WA Pty Ltd Western Australia Granted 100% E59/2382 Fields Find DC Mines Pty Ltd Western Australia Granted 100% non-FeO E59/2383 Fields Find Minjar Gold Pty Ltd Western Australia Granted 100% non-FeO E59/2575 Fields Find Anova Metals WA Pty Ltd Western Australia Granted 100% E59/2743 Fields Find Warriedar Resources Limited Western Australia Granted 100% M59/63 Fields Find DC Mines Pty Ltd Western Australia Granted 100% non-FeO M59/755 Fields Find Anova Metals WA Pty Ltd Western Australia Granted 100%
Page 19
19 E59/1199-I Golden Range DC Mines Pty Ltd Western Australia Granted 100% non-FeO E59/1327-I Golden Range DC Mines Pty Ltd Western Australia Granted 100% non-FeO (parts of tenement) E59/1328-I Golden Range DC Mines Pty Ltd Western Australia Granted 100% non-FeO (parts of tenement) E59/1329-I Golden Range DC Mines Pty Ltd Western Australia Granted 100% non-FeO E59/1333-I Golden Range DC Mines Pty Ltd Western Australia Granted 100% non-FeO E59/1952 Golden Range DC Mines Pty Ltd Western Australia Granted 100% non-FeO E59/2153 Golden Range DC Mines Pty Ltd Western Australia Granted 100% non-FeO E59/2262 Golden Range DC Mines Pty Ltd Western Australia Granted 100% non-FeO E59/2266 Golden Range DC Mines Pty Ltd Western Australia Granted 100% non-FeO E59/2273 Golden Range DC Mines Pty Ltd Western Australia Granted 100% non-FeO E59/2480 Golden Range DC Mines Pty Ltd Western Australia Granted 100% E59/2794 Golden Range Warriedar Resources Limited Western Australia Granted 100% E59/2862 Golden Range DC Mines Pty Ltd Western Australia Granted 100% E59/2863 Golden Range DC Mines Pty Ltd Western Australia Granted 100% E59/852 Golden Range DC Mines Pty Ltd Western Australia Granted 80% E59/888 Golden Range DC Mines Pty Ltd Western Australia Granted 100% non-FeO E59/985-I Golden Range DC Mines Pty Ltd Western Australia Granted 100% non-FeO G59/54 Golden Range DC Mines Pty Ltd Western Australia Granted 100% non-FeO G59/55 Golden Range DC Mines Pty Ltd Western Australia Granted 100% non-FeO G59/56 Golden Range DC Mines Pty Ltd Western Australia Granted 100% non-FeO G59/57 Golden Range DC Mines Pty Ltd Western Australia Granted 100% non-FeO G59/58 Golden Range DC Mines Pty Ltd Western Australia Granted 100% non-FeO G59/59 Golden Range DC Mines Pty Ltd Western Australia Granted 100% non-FeO G59/60 Golden Range DC Mines Pty Ltd Western Australia Granted 100% non-FeO L59/105 Golden Range DC Mines Pty Ltd Western Australia Granted 100% L59/121 Golden Range DC Mines Pty Ltd Western Australia Granted 100% L59/122 Golden Range DC Mines Pty Ltd Western Australia Granted 100% L59/133 Golden Range DC Mines Pty Ltd Western Australia Granted 100% L59/135 Golden Range DC Mines Pty Ltd Western Australia Granted 100% L59/143 Golden Range DC Mines Pty Ltd Western Australia Granted 100% non-FeO L59/44 Golden Range DC Mines Pty Ltd Western Australia Granted 100% non-FeO L59/54 Golden Range DC Mines Pty Ltd Western Australia Granted 100% L59/56 Golden Range DC Mines Pty Ltd Western Australia Granted 100% M59/219-I Golden Range DC Mines Pty Ltd Western Australia Granted 100% non-FeO M59/268-I Golden Range DC Mines Pty Ltd Western Australia Granted 100% M59/279-I Golden Range DC Mines Pty Ltd Western Australia Granted 100% M59/357-I Golden Range DC Mines Pty Ltd Western Australia Granted 80% M59/379-I Golden Range DC Mines Pty Ltd Western Australia Granted 100% M59/380-I Golden Range DC Mines Pty Ltd Western Australia Granted 100% M59/406-I Golden Range DC Mines Pty Ltd Western Australia Granted 100% non-FeO M59/420-I Golden Range DC Mines Pty Ltd Western Australia Granted 100% non-FeO M59/421-I Golden Range DC Mines Pty Ltd Western Australia Granted 100% non-FeO M59/431-I Golden Range DC Mines Pty Ltd Western Australia Granted 100% non-FeO M59/457-I Golden Range DC Mines Pty Ltd Western Australia Granted 100% non-FeO M59/458-I Golden Range DC Mines Pty Ltd Western Australia Granted 100% non-FeO M59/460-I Golden Range DC Mines Pty Ltd Western Australia Granted 100%
Page 20
20 M59/497-I Golden Range DC Mines Pty Ltd Western Australia Granted 100% non-FeO M59/591-I Golden Range DC Mines Pty Ltd Western Australia Granted 100% non-FeO M59/731-I Golden Range DC Mines Pty Ltd Western Australia Granted 100% non-FeO M59/732-I Golden Range DC Mines Pty Ltd Western Australia Granted 100% P59/2247 Golden Range DC Mines Pty Ltd Western Australia Granted 100% non-FeO P59/2248 Golden Range DC Mines Pty Ltd Western Australia Granted 100% Mining tenements acquired during the Quarter Nil Mining tenements disposed during the Quarter Nil
Page 21
21 APPENDIX 2 – SIGNIFICANT RESULTS Mt Gibson & Rothschild Significant intercepts table of Mt Gibson & Rothschild assay drill intersections using a 0.5 g/t Au cut-off, with a minimum width of 1 meter and a maximum of 2 meters of consecutive internal waste. Hole ID East North RL Dip/Azi From To Width Au g/t CMAC1339 515494 6720588 344 -90/0 42 43 1.00 0.78 CMAC1358 516296 6720906 344 -90/0 11 15 4.00 0.55 25 26 1.00 1.29 31 35 4.00 0.60 CMAC1433 514754 6718958 344 -90/0 3 6 3.00 0.77 CMAC1451 515801 6708439 355 -60/0 0 2 2.00 1.01 CMAC1458 515349 6708389 361 -60/0 0 1 1.00 0.50 5 7 2.00 0.58 CMAC1477 515451 6708596 358 -60/270 28 37 9.00 1.01 CMAC1499 515299 6708541 366 -60/270 60 61 1.00 0.57 CMAC1586 515688 6709876 344 -90/0 29 30 1.00 0.71 CMAC1627 515088 6719238 330 -60/90 33 34 1.00 0.79 62 64 2.00 0.83 CMAC1628 515007 6719157 330 -60/90 28 29 1.00 2.20 32 33 1.00 0.54 CMAC1629 514933 6719060 330 -60/90 35 36 1.00 0.97 CMAC1631 515081 6719056 329 -60/90 1 3 2.00 0.64 CMAC1636 514959 6719158 330 -60/90 57 63 6.00 1.58 68 70 2.00 0.71 73 76 3.00 1.11 CMAC1637 514912 6719158 331 -60/90 63 65 2.00 0.61 82 88 6.00 0.86 101 102 1.00 1.76 CMAC1640 515035 6719238 330 -60/90 93 99 6.00 1.07 CMAC1641 514978 6719245 330 -60/90 87 91 4.00 0.95 CMAC1644 515158 6719347 335 -60/90 93 94 1.00 1.56 CMAC1646 514902 6718946 332 -60/90 6 7 1.00 0.73 CMAC1647 514864 6718942 332 -60/90 39 41 2.00 1.40 51 53 2.00 1.36 CMAC1648 514806 6718950 333 -60/90 50 51 1.00 2.16 59 60 1.00 0.89 63 64 1.00 5.47 CMAC1649 514769 6718952 335 -60/90 86 87 1.00 0.57 91 93 2.00 0.89 CMAC1650 514718 6718959 335 -60/90 6 7 1.00 0.80 28 29 1.00 1.16 47 48 1.00 0.71 83 86 3.00 1.38 98 104 6.00 0.41 CMAC2061 514841 6718970 338 -60/90 44 52 8.00 1.16
Page 22
22 Hole ID East North RL Dip/Azi From To Width Au g/t CMAC2062 514818 6718972 338 -60/90 52 56 4.00 1.71 76 80 4.00 0.92 CMAC2063 514794 6718971 339 -60/90 76 80 4.00 1.02 CMAC2066 516169 6720988 324 -60/90 72 76 4.00 0.61 CMAC2198 526275 6760880 296 -60/270 48 52 4.00 0.53 CMRC1671 516495 6705428 351 -60/270 3 4 1.00 1.38 CMRC1672 516591 6705431 351 -60/270 3 4 1.00 1.37 CMRC1674 516543 6705323 361 -60/270 6 7 1.00 2.18 CMRC1676 516623 6705122 352 -61/270 108 112 4.00 1.00 CMRC1679 516652 6705006 340 -60/270 45 46 1.00 0.59 CMRC1682D 517667 6712050 320 -60/295 451 457 5.50 1.74 466 467 1.00 2.45 481 492 11.00 1.13 CMRC1683D 517474 6712290 318 -60/118 17 18 1.00 1.59 21 22 1.00 0.58 60 61 1.00 0.50 184 185 1.00 0.57 266 271 4.80 1.06 273 276 2.90 0.46 338 339 1.11 0.60 CMRC1685D 517273 6712196 327 -60/118 28 30 2.00 0.66 336 337 1.16 1.40 413 415 2.40 0.47 439 441 2.00 8.95 460 464 3.80 1.15 CMRC1740D 516598 6709537 350 -61/299 84 85 1.00 2.99 90 91 1.00 0.91 102 104 2.00 0.59 124 125 1.00 1.77 128 129 1.00 1.21 219 220 1.10 0.56 329 341 11.90 3.71 345 348 2.91 0.97 357 360 2.27 1.84 375 376 1.00 0.93 379 381 2.43 0.54 395 399 4.00 9.05 412 421 8.65 1.71 431 433 1.50 0.81 CMRC1785 516117 6707308 355 -60/270 65 68 3.00 1.32 74 75 1.00 0.57 CMRC1786 516091 6707283 355 -60/270 49 50 1.00 3.19 54 55 1.00 0.65 CMRC1787 516114 6707259 354 -60/270 60 65 5.00 14.53 71 72 1.00 0.53
Page 23
23 Hole ID East North RL Dip/Azi From To Width Au g/t 76 77 1.00 0.65 141 142 1.00 1.09 145 148 3.00 1.28 CMRC1788 516140 6707285 356 -60/270 1 3 2.00 0.74 91 95 4.00 0.39 101 103 2.00 1.67 CMRC1789 516173 6706681 345 -60/270 72 73 1.00 0.77 109 114 5.00 19.42 CMRC1790 516223 6706682 345 -60/270 4 5 1.00 0.62 47 49 2.00 0.60 95 98 3.00 1.19 CMRC1791 516119 6706577 345 -60/270 4 5 1.00 0.83 60 62 2.00 1.22 CMRC1792 516132 6706174 344 -60/270 44 45 1.00 1.39 91 93 2.00 3.53 CMRC1794 516284 6706151 343 -60/270 42 44 2.00 4.19 57 58 1.00 0.68 96 100 4.00 1.18 CMRC1795 516271 6706101 343 -60/270 36 38 2.00 3.70 43 46 3.00 1.74 110 111 1.00 2.37 CMRC1796 516283 6706070 343 -60/270 42 43 1.00 2.16 48 52 4.00 3.23 56 57 1.00 0.63 CMRC1797 516275 6706024 343 -60/270 51 52 1.00 0.65 CMRC1798 516231 6705869 343 -60/270 60 61 1.00 0.51 91 99 8.00 1.27 CMRC1799 516283 6705866 343 -60/270 41 42 1.00 1.60 CMRC1801 516081 6707174 353 -60/270 1 3 2.00 1.69 10 12 2.00 9.10 22 24 2.00 2.60 43 48 5.00 0.83 84 91 7.00 1.35 101 102 1.00 0.93 CMRC1802 516490 6704773 339 -61/270 113 114 1.00 2.00 131 132 1.00 1.41 CMRC1804 516457 6704714 339 -60/270 76 77 1.00 4.01 CMRC1805 516500 6704726 339 -60/270 45 47 2.00 1.40 72 73 1.00 1.59 106 107 1.00 2.31 122 126 4.00 2.91 CMRC1807 516485 6704678 339 -60/270 39 40 1.00 0.52 65 70 5.00 1.38 74 75 1.00 1.41 79 80 1.00 0.95
Page 24
24 Hole ID East North RL Dip/Azi From To Width Au g/t CMRC1910D 516531 6709219 337 -61/0 0 1 1.00 0.86 28 29 1.00 0.62 33 35 2.00 0.84 81 83 2.00 3.86 86 89 3.00 4.27 184 185 1.11 0.70 214 215 1.00 0.52 269 270 1.07 0.65 330 332 2.15 1.31 410 411 1.12 0.66 466 467 1.22 1.12 502 513 11.04 2.61 521 524 2.49 2.72 529 546 17.00 1.22 CMRC1920D 516426 6708744 341 -61/272 3 6 3.00 1.54 39 40 1.00 0.95 45 46 1.00 0.54 60 61 1.00 0.89 111 114 3.00 0.83 155 156 1.00 1.68 233 237 3.75 1.81 243 247 4.17 2.45 289 291 2.00 1.76 305 310 4.58 0.89 350 352 1.62 0.93 404 406 2.35 1.23 411 413 2.02 14.45 461 466 5.00 2.67 512 513 1.00 0.71 534 541 7.46 1.49 549 550 1.47 2.47 560 561 1.00 0.80 614 617 2.68 4.65 619 620 1.00 0.68 CMRC1922D 516530 6709343 336 -61/271 27 30 3.00 4.73 118 123 5.00 7.69 277 281 3.70 1.99 299 300 1.15 0.91 312 318 5.60 1.28 330 332 2.00 0.87 382 383 1.00 0.68 418 419 1.00 0.51 467 469 2.40 0.52 488 489 1.00 2.64 505 514 9.20 1.50
Page 25
25 Hole ID East North RL Dip/Azi From To Width Au g/t 517 518 1.00 2.47 550 551 1.00 1.50 553 558 4.60 1.35 575 576 1.00 0.58 CMRC1923D 516405 6709539 351 -68/299 20 22 2.00 0.60 43 44 1.00 0.60 48 49 1.00 2.85 54 70 16.00 2.22 73 75 2.00 1.61 81 82 1.00 1.45 115 122 7.30 0.69 135 136 1.00 1.15 224 225 1.01 1.30 298 299 1.00 0.60 309 310 1.22 1.25 325 327 1.50 1.19 333 334 1.00 0.70 351 352 1.00 1.02 373 382 9.32 2.37 416 430 14.00 1.79 470 471 1.00 1.31 CMRC1924D 516450 6709553 350 -63/300 54 59 5.00 0.81 64 66 2.00 1.61 81 82 1.00 1.64 88 93 5.00 0.96 97 98 1.00 1.07 109 125 16.00 1.39 402 403 1.06 0.85 408 409 1.50 10.50 412 414 2.15 4.28 420 428 7.71 2.43 433 434 1.00 0.81 438 443 5.00 1.12 456 460 4.43 7.98 467 468 1.10 1.20 522 523 1.00 1.69 CMRC1924DW 516449 6709556 350 -63/300 349 354 4.71 0.50 381 383 2.12 1.39 397 415 17.63 1.65 418 425 7.00 3.26 429 435 5.90 2.84 439 454 14.95 1.34 524 527 2.97 0.36 CMRC1929D 516402 6709765 341 -61/180 52 53 1.00 1.61 67 68 1.00 2.76
Page 26
26 Hole ID East North RL Dip/Azi From To Width Au g/t 89 91 2.00 1.80 97 98 1.00 1.25 116 117 1.00 0.81 147 150 3.00 0.68 256 257 1.00 1.04 272 273 1.00 1.11 278 283 4.94 1.57 286 289 2.90 3.84 292 293 1.00 1.18 296 335 38.70 2.48 CMRC1930D 516402 6709737 340 -62/0 36 38 2.00 0.63 63 64 1.00 1.74 75 79 4.00 0.68 89 91 2.00 5.04 114 116 2.00 0.95 179 181 1.84 0.70 201 202 1.00 0.62 251 252 1.00 0.56 307 309 2.38 0.74 311 312 1.00 0.90 319 320 1.00 1.27 327 339 11.56 4.75 341 346 5.00 6.23 350 360 10.55 4.33 364 370 6.29 2.40 377 379 1.85 0.81 381 382 1.00 0.71 385 386 1.00 0.67 CMRC1931D 516369 6709745 342 -60/180 0 1 1.00 0.65 78 80 2.00 0.56 87 88 1.00 0.50 137 138 1.00 5.91 145 146 1.00 0.85 178 180 2.46 1.57 186 187 1.00 2.53 217 235 18.22 1.05 238 239 1.00 1.08 243 253 9.11 0.71 263 268 5.00 1.11 292 293 1.00 0.54 CMRC1932D 516417 6709648 347 -61/301 54 55 1.00 0.79 64 65 1.00 0.57 86 87 1.00 0.58 90 91 1.00 0.93 325 326 1.00 0.62
Page 27
27 Hole ID East North RL Dip/Azi From To Width Au g/t 329 330 1.00 1.07 336 342 5.57 1.63 351 353 2.13 1.48 356 380 24.00 1.62 386 387 1.20 0.69 395 399 4.50 3.53 402 404 1.94 11.73 CMRC1933D 516381 6708781 343 -59/180 81 83 2.00 0.70 129 130 1.00 0.63 142 158 16.00 0.54 161 171 10.00 0.54 174 179 5.00 1.35 189 190 1.00 0.60 208 209 1.00 0.87 369 372 3.43 0.56 382 383 1.10 2.44 421 424 3.00 3.10 440 441 1.00 0.67 448 452 4.00 1.27 455 458 3.00 8.95 464 465 1.00 1.38 469 475 6.00 2.44 494 496 2.00 1.13 515 516 1.00 1.05 CMRC1934D 516376 6709002 339 -60/180 22 23 1.00 1.02 34 35 1.00 1.47 62 63 1.00 0.85 104 107 3.00 0.62 111 113 2.00 1.20 118 119 1.00 0.51 133 142 9.00 0.66 158 166 8.00 1.90 172 173 1.00 3.28 218 220 1.55 2.81 222 226 4.00 3.08 237 238 1.00 1.27 241 242 1.00 0.79 289 293 3.65 1.32 299 301 2.47 1.05 310 313 2.50 1.84 316 317 1.54 0.64 329 330 1.41 1.63 402 425 22.60 2.65 433 443 9.80 2.71 476 477 1.32 2.58
Page 28
28 Hole ID East North RL Dip/Azi From To Width Au g/t 525 526 1.00 1.67 CMRC1935D 516457 6709845 337 -63/300 22 23 1.00 2.40 41 42 1.00 1.17 55 56 1.00 11.95 96 97 1.00 1.13 139 143 4.00 1.17 149 150 1.00 49.00 329 334 4.89 2.02 355 371 16.50 2.35 375 376 1.00 0.53 CMRC1952 516305 6707054 350 -60/270 17 18 1.00 0.69 29 30 1.00 0.53 43 48 5.00 1.11 68 69 1.00 0.70 75 77 2.00 1.39 92 97 5.00 1.17 110 111 1.00 1.51 CMRC1953 516341 6707054 351 -60/270 49 51 2.00 1.72 56 66 10.00 1.27 72 73 1.00 3.18 82 83 1.00 1.61 86 96 10.00 4.04 99 100 1.00 0.99 105 106 1.00 0.76 121 122 1.00 1.21 131 133 2.00 1.62 136 137 1.00 1.50 CMRC1954 516141 6706904 348 -60/270 40 41 1.00 0.58 53 54 1.00 2.19 111 115 4.00 1.72 CMRC1956 516158 6706759 346 -60/270 54 58 4.00 0.59 96 98 2.00 1.18 108 110 2.00 1.59 116 117 1.00 0.85 CMRC1957 516169 6706704 345 -60/270 43 45 2.00 1.04 69 72 3.00 0.42 115 117 2.00 3.22 121 124 3.00 1.38 132 133 1.00 0.61 CMRC1958 516304 6706048 343 -60/270 68 72 4.00 0.92 88 90 2.00 1.07 CMRC1964 516305 6706200 343 -60/270 78 79 1.00 0.99 88 89 1.00 0.70 105 106 1.00 1.19 113 117 4.00 0.34
Page 29
29 Hole ID East North RL Dip/Azi From To Width Au g/t 123 124 1.00 0.62 CMRC1965 516303 6706252 343 -60/270 76 80 4.00 3.38 84 85 1.00 0.52 94 105 11.00 1.98 134 135 1.00 0.72 142 143 1.00 0.74 CMRC1967 516253 6706147 344 -60/270 108 109 1.00 0.84 CMRC1968 516251 6706103 344 -60/270 30 32 2.00 1.16 72 73 1.00 1.59 CMRC1969 516142 6706169 344 -60/270 80 81 1.00 0.58 94 95 1.00 1.49 101 102 1.00 0.68 CMRC1971 516134 6706284 344 -61/272 100 104 4.00 0.54 CMRC1972 516152 6706319 344 -62/270 44 54 10.00 1.23 59 60 1.00 1.22 CMRC1973 516140 6706342 345 -60/270 44 50 6.00 2.86 CMRC1974 516145 6706410 344 -60/270 67 69 2.00 1.06 89 90 1.00 3.01 CMRC1975 516144 6706375 344 -60/270 56 67 11.00 1.49 98 99 1.00 1.17 CMRC1976 516092 6707372 357 -60/270 0 1 1.00 0.54 41 44 3.00 1.27 51 56 5.00 4.69 65 66 1.00 0.64 113 117 4.00 1.08 126 134 8.00 0.67 142 146 4.00 0.88 CMRC1977 516077 6707323 356 -60/270 0 1 1.00 3.05 88 89 1.00 0.71 104 105 1.00 1.10 108 109 1.00 1.28 112 114 2.00 4.93 117 118 1.00 0.50 CMRC1978 516277 6706899 346 -59/269 0 1 1.00 0.51 39 45 6.00 0.86 81 83 2.00 0.57 CMRC1979 516258 6706899 346 -61/271 56 59 3.00 2.09 CMRC1980 516144 6706679 345 -61/270 2 3 1.00 0.63 12 13 1.00 0.57 47 53 6.00 0.68 83 84 1.00 0.70 CMRC1981 516190 6706679 345 -60/270 46 47 1.00 1.13 53 54 1.00 1.59 92 93 1.00 1.18 104 105 1.00 0.52
Page 30
30 Hole ID East North RL Dip/Azi From To Width Au g/t 112 113 1.00 0.55 126 128 2.00 2.97 149 150 1.00 0.51 CMRC1982 516168 6706651 345 -61/273 54 55 1.00 0.60 CMRC1983 516362 6706577 344 -61/274 50 51 1.00 0.55 124 125 1.00 0.51 131 132 1.00 0.91 137 138 1.00 2.10 163 164 1.00 0.66 175 176 1.00 1.10 179 182 3.00 0.79 200 201 1.00 1.12 213 214 1.00 2.01 CMRC1984 516359 6706534 344 -60/271 49 50 1.00 1.08 66 72 6.00 1.81 156 157 1.00 0.65 174 179 5.00 1.40 CMRC1988 516168 6705723 344 -60/270 63 64 1.00 1.26 CMRC1989 516228 6705679 343 -61/271 41 43 2.00 0.96 55 65 10.00 1.19 97 101 4.00 0.63 114 120 6.00 6.07 CMRC1990 516229 6705655 343 -61/269 40 50 10.00 1.05 94 95 1.00 1.04 CMRC1991 516247 6705625 343 -61/271 113 114 1.00 0.54 CMRC1995 541899 6784237 317 -61/345 133 134 1.00 2.93 148 149 1.00 0.54 197 198 1.00 1.90 CMRC1996 541905 6784217 316 -60/343 165 167 2.00 2.38 174 175 1.00 1.76 212 214 2.00 1.38 CMRC1997 541912 6784195 315 -60/346 204 205 1.00 0.51 215 220 5.00 5.98 224 227 3.00 0.88 247 248 1.00 0.50 257 258 1.00 1.86 CMRC1998 541938 6784243 317 -62/345 178 181 3.00 2.16 185 189 4.00 0.38 CMRC1999 541945 6784220 316 -61/345 213 214 1.00 4.61 218 219 1.00 0.60 253 254 1.00 0.52 270 271 1.00 1.61 279 281 2.00 0.80 CMRC2181D 516976 6710468 327 -56/299 5 8 3.00 0.70 66 67 1.00 0.58
Page 31
31 Hole ID East North RL Dip/Azi From To Width Au g/t 336 338 1.80 2.89 353 357 4.03 0.46 381 392 11.08 1.07 395 412 17.00 2.14 425 427 2.50 0.67 431 433 1.50 1.28 435 438 2.50 0.47 444 447 2.75 0.55 449 453 3.49 3.36 455 467 11.94 1.27 482 483 1.00 0.93 486 494 8.23 1.25 522 523 1.15 0.55 533 537 3.89 0.64 555 556 1.00 5.40 595 596 1.01 0.97 607 610 2.82 1.43 619 626 7.00 1.61 629 634 5.00 0.74 637 638 1.00 1.34 642 647 5.42 0.80 655 658 2.31 2.54 CMRC2182D 516993 6710535 326 -56/299 4 5 1.00 0.53 298 300 2.00 0.67 317 318 1.20 1.11 330 332 2.95 0.57 341 343 2.40 0.66 354 357 2.55 0.96 359 368 8.76 3.31 374 388 14.00 0.89 396 397 1.00 0.76 407 414 7.00 0.86 430 432 2.00 0.80 456 457 1.00 0.72 491 492 1.00 0.77 517 525 8.00 1.25 532 533 1.00 1.84 536 538 2.00 0.56 551 553 2.29 0.73 562 563 1.00 7.51 591 592 1.00 0.52 626 627 1.00 1.16 643 647 3.72 1.77 652 656 4.00 0.55 CMRC2187D 516958 6710508 328 -57/299 274 275 1.20 1.32
Page 32
32 Hole ID East North RL Dip/Azi From To Width Au g/t 282 283 1.00 0.98 288 289 1.00 2.84 320 325 5.55 1.09 334 336 2.50 0.78 350 371 21.00 1.54 373 385 12.00 4.03 396 401 4.85 2.57 418 419 1.00 1.36 421 423 1.60 0.66 446 447 1.00 1.68 457 458 1.00 1.42 461 462 1.00 1.04 511 513 1.87 0.68 524 525 1.00 0.57 533 535 2.15 1.08 541 544 3.00 1.03 551 555 4.00 1.58 557 561 3.85 1.98 577 578 1.70 0.98 602 604 2.00 0.94 661 665 4.48 1.55 674 675 1.75 1.77 692 696 4.18 0.43 CMRC2302D 517143 6710740 324 -60/300 76 77 1.00 2.26 190 198 8.00 20.88 205 207 2.00 1.18 217 218 1.00 0.66 235 239 4.00 0.50 456 457 1.10 0.89 461 464 3.14 0.79 503 504 1.00 0.89 512 513 1.00 0.97 516 519 3.27 1.92 521 527 5.69 2.10 540 543 3.12 1.29 555 556 1.00 0.97 561 562 1.00 0.51 606 610 4.00 2.30 656 658 2.20 0.58 698 702 4.45 0.63 707 712 5.19 0.90 715 730 15.15 12.12 733 740 7.00 1.04 CMRC2304 516025 6709593 343 -60/270 51 52 1.00 0.89 CMRC2308 515623 6709593 353 -60/269 1 3 2.00 0.80
Page 33
33 Hole ID East North RL Dip/Azi From To Width Au g/t 6 7 1.00 1.32 CMRC2310 515825 6709587 361 -60/270 2 4 2.00 1.73 CMRC2311 515927 6709597 361 -59/269 8 9 1.00 25.90 CMRC2312 515628 6709497 356 -60/268 4 6 2.00 0.74 CMRC2314 515822 6709497 365 -60/269 11 13 2.00 1.95 CMRC2317 515723 6709388 373 -60/269 27 29 2.00 0.81 CMRC2334 515527 6709193 363 -61/270 11 19 8.00 1.30 75 76 1.00 0.85 CMRC2335 515620 6709195 363 -59/270 3 7 4.00 0.79 13 14 1.00 0.64 CMRC2336 515729 6709195 369 -60/271 8 9 1.00 0.55 13 16 3.00 0.93 CMRC2337 515835 6709197 365 -60/270 9 10 1.00 4.03 CMRC2338 515625 6709294 368 -61/270 8 9 1.00 0.58 15 16 1.00 0.72 20 21 1.00 0.52 CMRC2341 515821 6709094 359 -59/271 2 4 2.00 0.53 7 8 1.00 0.75 CMRC2343 515923 6709289 361 -59/269 7 13 6.00 2.26 50 51 1.00 1.59 CMRC2368D 516447 6708714 344 -61/270 30 37 7.00 0.81 51 52 1.00 0.71 56 57 1.00 0.52 111 112 1.00 0.55 152 155 3.00 0.43 181 184 2.50 0.65 195 196 1.00 5.38 215 225 10.00 3.34 230 234 4.00 1.27 237 238 1.00 1.68 276 277 1.00 0.55 290 295 5.06 1.20 299 300 1.06 0.83 338 341 3.00 0.58 344 345 1.02 0.58 349 350 1.00 1.15 358 359 1.00 3.03 388 389 1.00 0.78 419 420 1.05 0.97 429 431 1.70 3.73 530 535 5.00 3.93 539 543 3.60 0.77 545 548 2.65 1.85 557 563 6.55 1.95 566 569 2.30 3.57
Page 34
34 Hole ID East North RL Dip/Azi From To Width Au g/t 663 664 1.20 1.02 699 700 1.02 0.53 CMRC2382D 516527 6709370 334 -71/273 5 6 1.00 0.73 33 34 1.00 0.60 137 138 1.00 0.72 175 176 1.00 0.52 258 259 1.00 1.22 270 272 2.21 3.19 287 288 1.00 0.74 295 299 3.60 0.77 306 308 1.50 6.06 324 327 3.39 0.60 365 366 1.29 1.41 501 509 8.00 3.49 554 555 1.27 1.39 571 574 2.50 0.51 CMRC2382DW 516530 6709369 334 -60/270 267 270 2.58 0.90 283 284 1.00 0.72 290 291 1.00 0.52 298 304 6.20 0.95 312 313 1.00 0.72 327 328 1.00 0.55 355 356 1.00 1.62 394 396 2.00 2.24 428 432 4.00 0.36 483 492 8.50 2.31 512 518 6.00 1.36 524 530 6.19 0.64 533 536 3.32 3.40 556 557 1.00 1.98 CMRC2384D 516417 6709600 350 -60/297 5 6 1.00 0.58 24 25 1.00 2.31 50 54 4.00 0.96 57 59 2.00 1.13 78 79 1.00 0.63 82 83 1.00 0.79 88 89 1.00 0.58 231 232 1.00 0.50 366 374 7.97 1.08 377 378 1.00 0.91 385 389 3.64 5.57 392 396 4.50 0.66 408 425 17.00 1.48 CMRC2384DW 516417 6709600 350 -60/297 277 282 4.79 0.34 321 323 2.12 0.49
Page 35
35 Hole ID East North RL Dip/Azi From To Width Au g/t 355 360 4.56 1.31 363 364 1.00 0.54 368 369 1.04 0.79 374 375 1.26 2.84 379 381 2.33 1.90 391 407 16.19 1.56 470 471 1.00 0.58 CMRC2385D 516428 6709562 350 -61/269 11 12 1.00 0.55 28 29 1.00 0.51 32 36 4.00 0.67 55 60 5.00 3.66 63 65 2.00 0.69 69 74 5.00 1.27 86 87 1.00 0.82 91 98 7.00 2.40 128 130 1.78 1.05 136 138 2.06 0.59 151 152 1.00 0.80 167 169 2.21 0.75 184 185 1.39 1.34 281 282 1.00 0.67 366 372 6.15 4.17 377 383 6.46 1.36 390 394 3.25 2.38 397 400 3.00 0.69 403 410 7.00 1.47 416 421 5.00 0.60 429 435 6.48 0.94 CMRC2401D 516854 6710477 348 -61/298 1 2 1.00 0.99 27 28 1.00 0.61 63 64 1.00 0.74 98 99 1.00 0.65 116 132 16.00 1.80 136 144 8.00 1.32 149 162 12.80 1.07 277 278 1.70 0.64 305 308 3.50 0.94 329 332 3.00 1.14 336.02 340.92 4.90 6.17 344.8 351 6.20 1.71 378 379 1.00 45.40 386 392.6 6.60 2.66 396 397.23 1.23 0.81 423.41 425 1.59 1.69 467 468 1.00 0.86
Page 36
36 Hole ID East North RL Dip/Azi From To Width Au g/t CMRC2402D 516876 6710513 343 -61/299 20 23 3.00 1.30 59 62 3.00 0.55 80 82 2.00 0.79 103 105 2.00 1.59 115 116 1.00 1.50 147 148 1.00 3.16 154 155 1.00 0.61 159 163.61 4.61 2.36 173 181.3 8.30 2.24 184 187 3.00 1.31 189.77 193.89 4.12 4.80 196 197 1.00 3.18 205.26 207.25 1.99 1.20 249.47 254 4.53 2.76 258 261.93 3.93 1.94 282 283 1.00 0.74 293 294 1.00 2.41 329 330 1.00 0.56 368.1 371 2.90 0.45 407 408 1.00 0.55 417 420 3.00 1.17 427.9 430 2.10 5.88 437.35 440 2.65 0.71 445 446 1.00 0.84 CMRC2403D 516898 6710559 342 -60/300 18 22 4.00 0.36 44 45 1.00 0.61 95 96 1.00 6.16 111 113 2.00 1.80 175 178 3.00 1.35 185 186.9 1.90 1.18 193 194 1.00 0.53 213 214 1.00 0.50 224 228.67 4.67 0.72 239 242 3.00 0.77 259 263 4.00 0.58 269 271 2.00 0.76 279 281 2.00 0.84 314.45 319.2 4.75 0.61 335 336 1.00 0.81 344 345 1.00 0.51 366.49 371 4.51 1.28 377.42 378.6 1.18 0.71 391 400 9.00 0.72 404.42 418 13.58 1.18 423.86 426.73 2.87 0.72
Page 37
37 Hole ID East North RL Dip/Azi From To Width Au g/t 449 450 1.00 0.52 CMRC2404D 516382 6709665 343 -60/297 110 111 1.00 3.15 144 147 3.00 0.58 335.73 345.7 9.97 1.87 352.91 366 13.09 2.25 376 377 1.00 0.57 CMRC2406D 517042 6710992 326 -60/296 181.4 185.68 4.28 1.26 228 229 1.00 0.97 232.6 243 10.40 1.40 259.8 265.48 5.68 0.73 273 274 1.00 0.59 278 285 7.00 0.55 347 348 1.00 0.63 363.2 365.68 2.48 0.74 368.75 374 5.25 1.13 CMRC2407D 517095 6710966 323 -60/288 0 2 2.00 0.88 287 288 1.00 0.58 320.2 323 2.80 0.41 327 328.6 1.60 0.93 340 341 1.00 10.25 343.88 345.6 1.72 1.00 358.25 359.87 1.62 2.50 367 369 2.00 0.61 371.8 373 1.20 0.68 378.9 380.33 1.43 1.47 408 409 1.00 1.80 420 422 2.00 3.11 446.57 448.4 1.83 1.09 451.65 455.5 3.85 1.01 459 460 1.00 1.89 465 469 4.00 1.39 503 504 1.00 0.69 512.8 514 1.20 1.14 CMRC2409D 516970 6710979 327 -60/297 1 2 1.00 0.64 32 33 1.00 0.64 38 43 5.00 1.64 55 56 1.00 0.60 65 66 1.00 2.53 89 90 1.00 1.83 95 96 1.00 1.89 100 108 8.00 1.95 122 132 10.00 0.64 140 144 4.00 1.36 149 154 5.00 0.61 200 201 1.00 0.87
Page 38
38 Hole ID East North RL Dip/Azi From To Width Au g/t 252 253.3 1.30 6.86 255.65 260 4.35 0.42 265 274.8 9.80 0.58 277 278 1.00 1.66 300 302 2.00 1.18 CMRC2410D 517004 6710900 326 -52/291 0 1 1.00 0.50 138.59 139.64 1.05 0.92 157 158.56 1.56 2.65 172 173 1.00 2.64 190 193.08 3.08 0.46 205.04 208 2.96 3.95 211 216 5.00 0.79 219 221 2.00 1.54 231 232 1.00 0.94 235 242 7.00 9.06 250.73 252 1.27 1.14 259.89 267 7.11 1.77 280 281 1.00 4.64 292 296 4.00 0.71 320 321 1.00 0.76 330 333 3.00 0.78 338 340 2.00 1.04 348 349 1.00 2.08 366 376 10.00 2.25 380 381 1.00 2.42 384 386 2.00 9.34 388.13 394 5.87 2.06 407.2 410 2.80 0.68 427 429 2.00 3.36 451 452 1.00 2.27 CMRC2411D 516997 6710843 326 -61/301 0 1 1.00 0.96 109 110 1.00 1.00 128 129 1.00 0.81 132 133 1.00 1.97 145 146 1.00 0.63 164 168 4.00 0.92 202 203 1.00 0.50 212 213.55 1.55 2.48 226 227 1.00 0.82 235 236 1.00 1.52 247.03 251.74 4.71 0.59 260 264 4.00 1.24 281 282 1.00 0.70 287 288 1.00 3.02 308 309 1.00 0.81
Page 39
39 Hole ID East North RL Dip/Azi From To Width Au g/t 313 314 1.00 1.04 337 340 3.00 2.13 351.25 352.38 1.13 0.86 382.06 395 12.94 5.49 408 410.02 2.02 1.05 417 419.8 2.80 6.56 433.9 435.55 1.65 0.69 438 439.85 1.85 1.88 450 451 1.00 0.64 CMRC2413D 516939 6710823 329 -61/307 0 3 3.00 1.13 72 73 1.00 1.37 119 120 1.00 1.83 125 129 4.00 1.34 132 134 2.00 1.27 154 161 7.00 0.80 164 165 1.00 0.53 176 177 1.00 1.49 181 182 1.00 1.31 187 188 1.00 0.62 236.34 240 3.66 2.09 247.3 250.27 2.97 0.44 257 258 1.00 0.55 276 277 1.00 1.17 294.5 298 3.50 5.12 303 304 1.00 0.70 306.85 308 1.15 0.86 341 342 1.00 1.05 363 364 1.00 1.11 370 371.67 1.67 5.77 CMRC2414D 516951 6710937 328 -60/299 27 28 1.00 0.62 59 60 1.00 8.58 68 74 6.00 0.98 88 91 3.00 1.28 96 97 1.00 2.86 100 101 1.00 1.61 105 106 1.00 0.72 111 112 1.00 1.72 151 155 4.00 1.15 178 179 1.00 2.06 219 220 1.00 0.87 233 235 2.00 1.10 250 256 6.00 0.71 259 263 4.00 1.80 CMRC2416D 517023 6710658 325 -60/306 5 7 2.00 0.53 305 308.4 3.40 0.59
Page 40
40 Hole ID East North RL Dip/Azi From To Width Au g/t 323 324 1.00 0.53 335.5 337 1.50 2.84 343 344 1.00 1.85 353 354 1.00 1.13 358 359 1.00 1.15 362 363 1.00 0.97 547 548 1.00 2.15 555 558 3.00 1.26 567.88 577.04 9.16 2.07 581.13 591 9.87 1.06 596 597 1.00 0.63 CMRC2417D 516929 6710713 341 -60/300 73 74 1.00 1.20 89 90 1.00 0.81 101 103 2.00 0.69 131 132 1.00 1.66 149 153 4.00 1.46 156 159 3.00 2.18 169 176 7.00 1.34 179 180 1.00 0.50 190 194.61 4.61 0.97 203 212 9.00 0.92 223 224 1.00 2.16 280 281 1.00 2.57 288 289 1.00 0.93 331.03 341.5 10.47 0.83 347 360 13.00 1.09 367 373 6.00 1.12 399 400 1.00 0.88 CMRC2418D 517193 6711200 322 -56/301 343 344 1.00 0.58 355 356 1.00 0.62 374 376 2.00 3.31 385 390.86 5.86 1.06 412 413 1.00 1.22 429 431.53 2.53 0.64 455 458 3.00 1.18 462 465 3.00 8.07 538 539 1.00 0.90 566.23 567.75 1.52 1.32 608 609 1.00 2.62 647.58 650 2.42 2.43 CMRC2419D 517078 6710626 324 -65/305 197 199 2.00 2.65 388 389 1.00 0.90 531.89 533.42 1.53 2.97 537 538.1 1.10 0.68 541 542 1.00 0.68
Page 41
41 Hole ID East North RL Dip/Azi From To Width Au g/t 545.31 547 1.69 1.95 551.73 554 2.27 1.89 557 558.48 1.48 1.25 568 569 1.00 6.51 574 578 4.00 2.40 592 593 1.00 0.59 609.8 613 3.20 0.68 642.68 644.36 1.68 0.83 676.14 677.78 1.64 1.61 709.31 710.37 1.06 0.55 727.12 734.68 7.56 0.81 737 751.03 14.03 5.14 756 757 1.00 0.56 760 762 2.00 2.31 778.7 782.65 3.95 1.58 799 803.9 4.90 0.95 808.5 823.8 15.30 0.80 827 828 1.00 3.18 838.1 841.14 3.04 1.76 852 858 6.00 0.75 CMRC2420D 517072 6711090 324 -60/302 206 207 1.00 0.70 246.96 247.98 1.02 0.80 251.93 255.6 3.67 8.61 284 289.36 5.36 0.60 349 350 1.00 1.58 CMRC2421D 517120 6711061 323 -61/301 98 101 3.00 2.72 322 324.5 2.50 1.69 354 357.1 3.10 1.57 383 386 3.00 4.33 389 390 1.00 0.69 414 418 4.00 0.60 436 439 3.00 0.92 447 448 1.00 1.41 CMRC2422D 517170 6711032 322 -60/299 150 151 1.00 0.77 420 421 1.00 5.64 442.21 445 2.79 1.70 450.98 452 1.02 1.10 468 469.37 1.37 15.07 488 496 8.00 1.21 518 519 1.00 1.24 522 524 2.00 2.55 554 555 1.00 0.80 559 562 3.00 1.73 614.8 625.64 10.84 1.39 640 643 3.00 0.54
Page 42
42 Hole ID East North RL Dip/Azi From To Width Au g/t 649 650 1.00 0.77 665.5 666.5 1.00 1.88 704 705 1.00 0.95 711 712 1.00 0.76 CMRC2423D 516398 6709617 348 -61/299 43 51 8.00 0.99 90 91 1.00 0.71 265.6 269 3.40 1.32 297.97 299.63 1.66 1.56 336.11 385.28 49.17 1.57 395 396 1.00 1.03 406 407 1.00 1.56 CMRC2423DW 516395 6709614 348 -61/301 291 292 1.00 3.30 308 309 1.00 1.97 320 349.5 29.50 1.44 354.5 357.5 3.00 1.58 363 367 4.00 1.44 373 376 3.00 1.03 386 387 1.00 0.87 409.65 411 1.35 2.19 416 417 1.00 1.51 428 429 1.00 0.52 431.64 436.5 4.86 8.48 CMRC2424D 516438 6708526 346 -61/270 10 11 1.00 0.57 70 74 4.00 0.72 78 84 6.00 1.29 99 100 1.00 1.17 130 132 2.00 1.03 206 207 1.00 0.60 213 215 2.00 0.67 219.49 221.6 2.11 0.83 227 229.9 2.90 0.54 300 314 14.00 1.51 339 341 2.00 1.26 345 346 1.00 1.29 355 356 1.00 2.67 377 378 1.00 1.40 383 384 1.00 0.61 400 402 2.00 0.58 CMRC2425D 517121 6711002 322 -61/301 0 1 1.00 1.26 76 78 2.00 2.42 108 109 1.00 0.53 374 376.72 2.72 0.69 380.79 386 5.21 3.38 398.1 400 1.90 2.48 406 411.6 5.60 2.43
Page 43
43 Hole ID East North RL Dip/Azi From To Width Au g/t 441.5 442.5 1.00 0.72 481 482 1.00 0.82 513 526.5 13.50 1.34 534.5 538.5 4.00 1.44 545 549.5 4.50 0.58 587 588 1.00 0.57 599.5 600.9 1.40 1.08 CMRC2426D 517075 6711031 324 -61/300 268 269.17 1.17 1.29 275 283.34 8.34 2.82 294 299.54 5.54 1.43 327 329 2.00 1.97 335 340 5.00 1.77 356 358 2.00 6.80 363 364 1.00 1.59 369 370 1.00 4.30 373 374 1.00 1.38 417 418 1.00 1.34 420.78 422 1.22 18.19 426.43 433 6.57 1.03 438.25 439.4 1.15 1.73 441.46 444 2.54 15.62 457 463.8 6.80 1.40 CMRC2427D 517147 6711102 322 -60/303 49 50 1.00 0.60 67 72 5.00 0.79 267.5 268.5 1.00 0.76 284 285 1.00 0.70 309 310.14 1.14 0.53 341.6 343.2 1.60 11.23 362.55 371.59 9.04 3.54 377.61 380.49 2.88 1.78 431 432 1.00 5.46 459 460 1.00 0.71 465 466 1.00 0.70 CMRC2428D 517151 6710886 324 -61/0 125 129 4.00 0.44 282.87 284 1.13 0.55 357 358 1.00 1.59 422 423 1.00 1.84 441.76 443.65 1.89 15.14 445.98 453.4 7.42 4.52 458.15 463.02 4.87 4.58 465.27 468 2.73 0.94 480.98 488.97 7.99 2.17 501 502 1.00 1.04 512.29 514.52 2.23 0.94 520.4 521.44 1.04 1.92
Page 44
44 Hole ID East North RL Dip/Azi From To Width Au g/t 538 541 3.00 1.41 563 566 3.00 0.72 575.55 581.5 5.95 2.25 583.82 585.1 1.28 18.99 592 595.93 3.93 1.78 602 603 1.00 0.63 605.5 614 8.50 6.22 625 627 2.00 2.97 630 631 1.00 1.43 655.4 657.54 2.14 2.91 CMRC2429D 516927 6710482 332 -60/0 9 10 1.00 0.54 242.44 248 5.56 2.45 252 255 3.00 1.34 258 259 1.00 0.51 268 272 4.00 1.81 275 300 25.00 2.29 323 329 6.00 2.90 351.19 355.5 4.31 1.29 358.58 367.35 8.77 1.81 379 381 2.00 2.20 411 412 1.00 1.08 435 436 1.00 0.54 471 472 1.00 0.82 490 494 4.00 0.67 497 499 2.00 2.90 527 529.12 2.12 2.04 561 562 1.00 2.66 571 577.47 6.47 2.15 584 590 6.00 0.56 597 616 19.00 0.95 627 634 7.00 1.87 637 639 2.00 1.06 643 644 1.00 0.61 669 671 2.00 2.18 CMRC2430D 517247 6711167 321 -61/300 2 4 2.00 0.59 370 371 1.00 0.62 405 406 1.00 7.02 446.3 451.67 5.37 1.05 480 481.12 1.12 10.10 512.15 517 4.85 2.85 530.8 539.43 8.63 1.27 541.8 545 3.20 0.45 567.95 569 1.05 1.30 582 583 1.00 0.54 585.3 588.41 3.11 2.52
Page 45
45 Hole ID East North RL Dip/Azi From To Width Au g/t 631 632 1.00 0.59 698.4 701.26 2.86 1.58 CMRC2431D 516359 6709636 343 -62/301 238 239 1.00 2.02 252 256.04 4.04 5.58 260 265 5.00 1.88 268 277 9.00 2.76 280 281 1.00 0.55 285 287 2.00 0.75 290 294 4.00 1.35 298 301 3.00 0.52 311.04 313.5 2.46 0.49 326 327 1.00 1.23 CMRC2432D 516416 6709575 350 -60/300 13 14 1.00 0.65 50 57 7.00 0.90 60 61 1.00 0.56 114 115 1.00 0.52 119 120 1.00 0.79 144 145 1.00 1.03 CMRC2433D 516454 6709622 350 -60/301 39 40 1.00 0.52 57 60 3.00 0.87 66 74 8.00 1.20 109 112 3.00 1.77 144 145 1.00 0.84 197 198 1.00 0.96 413.95 415 1.05 0.61 431 445 14.00 0.62 453 456 3.00 1.10 462 463 1.00 1.73 466 469 3.00 2.60 CMRC2434D 516893 6710674 350 -61/300 8 13 5.00 0.42 105 106 1.00 1.68 113 123 10.00 1.58 126 127 1.00 0.50 136 137 1.00 2.09 140 144 4.00 0.58 158 162 4.00 0.72 179 180 1.00 1.73 211 212 1.00 0.87 223 224 1.00 0.58 245 246.09 1.09 0.64 265 266 1.00 0.65 293 302.76 9.76 0.95 306 307 1.00 0.67 311 312 1.00 6.11 316 321.5 5.50 0.70
Page 46
46 Hole ID East North RL Dip/Azi From To Width Au g/t 325 333.73 8.73 1.47 336 338 2.00 0.70 353 356 3.00 1.03 359 363.27 4.27 1.76 CMRC2435D 516852 6710581 353 -61/301 12 15 3.00 1.23 27 29 2.00 0.58 35 36 1.00 0.72 70 72 2.00 0.82 89 90 1.00 0.92 98 99 1.00 4.00 104 111 7.00 1.14 117 119 2.00 0.55 122 130 8.00 2.11 134 142 8.00 0.76 155 156 1.00 1.42 171 172 1.00 0.73 187 188 1.00 2.26 220 223 3.00 0.67 245.84 246.94 1.10 0.69 261 262 1.00 0.57 276 277 1.00 1.69 301.5 304.75 3.25 4.17 310 314 4.00 0.50 317 324 7.00 0.91 327 335 8.00 0.77 338.2 343 4.80 1.87 349 357.2 8.20 0.81 CMRC2436D 516957 6710639 334 -61/300 11 12 1.00 0.54 119 120 1.00 0.91 160 161 1.00 0.64 181 182 1.00 1.04 187 188 1.00 1.60 237 238 1.00 0.50 246 247 1.00 0.66 267 268 1.00 0.68 271 276 5.00 1.48 281 282 1.00 0.70 294 301 7.00 0.83 304 305 1.00 1.10 377 378 1.00 1.53 386 390 4.00 0.35 411 413 2.00 5.23 427 428 1.00 0.54 442 443 1.00 0.75 454 471 17.00 1.21
Page 47
47 Hole ID East North RL Dip/Azi From To Width Au g/t 476 480 4.00 0.53 484 485 1.00 1.70 490 492 2.00 1.73 CMRC2437D 516550 6709396 339 -63/270 46 47 1.00 0.78 59 60 1.00 2.16 126.1 129.5 3.40 0.71 145 146 1.00 0.63 152.4 154 1.60 0.54 170 171 1.00 0.93 178 182 4.00 1.19 235 236 1.00 0.54 257 258 1.00 2.48 267 279 12.00 6.78 284 285 1.00 1.19 288.74 295 6.26 0.59 308 314 6.00 0.48 317 321 4.00 1.21 338 340.1 2.10 2.78 352.12 354 1.88 1.34 359 362 3.00 0.55 374 375 1.00 0.72 407 409 2.00 1.51 440 441 1.00 0.65 454.93 456 1.07 7.52 490 491 1.00 0.60 513 523.5 10.50 0.82 561 562 1.00 0.52 570 571 1.00 2.40 576 577 1.00 0.72 594 595 1.00 1.09 CMRC2438D 516390 6709541 349 -60/299 41 45 4.00 0.52 48 54 6.00 0.77 66 68 2.00 0.86 81 82 1.00 0.70 88 94 6.00 0.82 97 107 10.00 0.70 126 127 1.00 0.90 133 134 1.00 0.51 209 210 1.00 0.61 251.64 255 3.36 0.79 267.76 268.81 1.05 2.38 282.93 284.25 1.32 1.58 312 313 1.00 0.77 316 318 2.00 5.53 338.55 343.4 4.85 3.74
Page 48
48 Hole ID East North RL Dip/Azi From To Width Au g/t 356 357 1.00 0.99 370 373 3.00 0.69 387 395 8.00 2.29 448 449 1.00 1.31 CMRC2439D 516383 6709598 347 -60/300 40 43 3.00 1.37 46 50 4.00 0.61 79 81 2.00 0.72 CMRC2440D 516926 6710422 328 -61/301 6 7 1.00 0.50 CMRC2441D 517003 6710930 327 -62/302 1 2 1.00 0.94 107 108 1.00 0.52 149 150 1.00 1.28 155 156 1.00 0.52 170 175 5.00 2.65 177.33 181 3.67 0.88 186 187 1.00 0.76 194 195 1.00 0.69 198 199 1.00 1.05 201.7 206 4.30 1.68 213.5 215 1.50 1.00 222 223 1.00 0.54 227 228 1.00 0.53 230.25 231.5 1.25 1.00 265 269 4.00 0.58 286 287 1.00 1.85 289.14 291.11 1.97 4.08 309 310 1.00 0.61 323 324 1.00 0.53 328 329 1.00 0.52 333.83 336.1 2.27 0.89 338.2 340 1.80 1.30 342.5 351 8.50 0.72 414 415 1.00 0.80 CMRC2442D 517049 6710925 326 -61/301 1 4 3.00 0.60 41 42 1.00 0.60 197 198 1.00 0.70 251 252 1.00 0.89 267 270 3.00 0.50 273 274 1.00 1.50 278 279 1.00 0.81 285 286 1.00 1.15 289 290 1.00 1.80 297 298 1.00 5.78 305 307 2.00 2.54 317 318 1.00 5.53 323 324 1.00 2.14
Page 49
49 Hole ID East North RL Dip/Azi From To Width Au g/t 330 331 1.00 2.87 366 368 2.00 1.27 423 429 6.00 0.48 438 440 2.00 0.49 470 471 1.00 0.75 CMRC2443D 517023 6711055 326 -61/300 133 134 1.00 0.67 157 158 1.00 2.22 162 163 1.00 1.76 168 178 10.00 2.12 187.52 189.02 1.50 1.06 193.55 196.14 2.59 0.50 234 235 1.00 0.80 276 277 1.00 1.20 312 313 1.00 0.53 327.68 332.53 4.85 3.99 341 342 1.00 2.93 372.4 373.75 1.35 0.70 381 382 1.00 1.81 429 430 1.00 0.81 CMRC2444D 517119 6711177 323 -61/300 41 42 1.00 0.83 281.6 289.79 8.19 0.69 321 325 4.00 1.01 333.7 335.82 2.12 1.34 342 343 1.00 1.26 363 365 2.00 0.50 408 409 1.00 1.21 CMRC2445D 517163 6711264 322 -61/300 138 140 2.00 2.29 298 299 1.00 0.99 330.32 334.39 4.07 0.83 385.22 388.42 3.20 0.33 391 392.87 1.87 1.26 CMRC2446D 516980 6710778 338 -60/299 0 1 1.00 0.76 7 8 1.00 0.59 14 15 1.00 1.50 82 83 1.00 0.99 158.92 160.12 1.20 1.16 180 181 1.00 0.71 188 190.4 2.40 9.48 205.77 207.63 1.86 1.48 211 213.34 2.34 2.18 215.77 217 1.23 2.41 230 236.21 6.21 0.75 264 265 1.00 0.81 275 276 1.00 1.22 299.78 305 5.22 1.75
Page 50
50 Hole ID East North RL Dip/Azi From To Width Au g/t 308 309 1.00 0.90 321.41 323 1.59 0.59 371 380 9.00 0.97 387 388.68 1.68 1.66 392.32 401.08 8.76 1.46 414 415.87 1.87 0.68 418 420.4 2.40 0.98 475 476 1.00 0.68 CMRC2447 516662 6704588 338 -61/299 72 73 1.00 0.76 103 104 1.00 1.10 121 122 1.00 1.25 CMRC2448 516741 6704495 337 -61/299 38 40 2.00 0.62 65 66 1.00 3.02 83 84 1.00 0.57 109 110 1.00 0.85 CMRC2449 516751 6704468 336 -61/299 38 40 2.00 2.61 52 57 5.00 2.01 72 73 1.00 1.21 80 81 1.00 1.62 86 87 1.00 1.06 CMRC2451 516324 6705452 343 -60/299 175 181 6.00 1.50 188 189 1.00 1.72 193 194 1.00 0.94 CMRC2452 516174 6705502 343 -60/299 13 14 1.00 4.57 49 50 1.00 0.91 CMRC2453 516199 6705502 343 -60/299 46 49 3.00 0.96 CMRC2454 516299 6705502 342 -61/299 46 47 1.00 0.66 136 137 1.00 0.62 163 164 1.00 0.92 CMRC2456 516199 6705552 343 -60/272 69 70 1.00 0.76 94 95 1.00 0.60 CMRC2457 516249 6705550 343 -60/273 46 47 1.00 0.89 109 110 1.00 1.33 CMRC2458 516275 6705552 343 -61/271 46 47 1.00 0.65 93 98 5.00 1.18 116 118 2.00 1.87 CMRC2459D 516452 6709029 338 -60/268 0 1 1.00 0.80 26 27 1.00 2.20 35 41 6.00 0.49 49 52 3.00 1.83 60 65 5.00 2.41 79 80 1.00 0.80 90 92 2.00 1.27 105 106 1.00 0.88 111 117 6.00 1.58
Page 51
51 Hole ID East North RL Dip/Azi From To Width Au g/t 124 126 2.00 1.75 134 136 2.00 1.82 218 219 1.00 0.60 241 243 2.00 0.54 255.7 258 2.30 4.02 268 269 1.00 0.69 283 288 5.00 0.55 309 312 3.00 1.08 376.19 377.4 1.21 0.63 402 405.61 3.61 0.35 408.66 413.88 5.22 1.33 426.9 431 4.10 3.19 447 448 1.00 0.58 452 453 1.00 23.70 472 473 1.00 1.48 497 499.63 2.63 2.46 503 505 2.00 0.59 521 525 4.00 4.56 622 623 1.00 0.83 644 645 1.00 0.87 CMRC2460D 516515 6709063 339 -60/268 39 40 1.00 3.06 53 58 5.00 0.70 64 65 1.00 1.38 116 118 2.00 2.76 130 131 1.00 0.51 151 152 1.00 0.74 160 162 2.00 1.19 167 169 2.00 0.69 199 203 4.00 0.67 206 207 1.00 0.98 214.86 219 4.14 0.71 223.5 225 1.50 1.17 246 247 1.00 0.97 264.02 271.5 7.48 0.67 281 283 2.00 3.08 287 288 1.00 1.78 294 295 1.00 1.29 316 317.75 1.75 0.54 CMRC2460DW 516515 6709063 339 -60/268 200 202 2.00 1.12 CMRC2461D 516531 6709239 337 -60/264 0 1 1.00 0.58 24 25 1.00 1.25 29 30 1.00 0.55 CMRC2462D 516534 6709315 337 -60/268 34 35 1.00 0.60 38 42 4.00 1.41 66 68 2.00 1.08
Page 52
52 Hole ID East North RL Dip/Azi From To Width Au g/t 159.11 161 1.89 1.05 183 184 1.00 0.96 206 208 2.00 0.82 215 218.16 3.16 0.58 232 233 1.00 0.66 296 300 4.00 0.48 307 308 1.00 2.35 318 319 1.00 0.63 327 328 1.00 4.19 341 342 1.00 0.56 355 356 1.00 3.90 374.31 377 2.69 0.87 384 385 1.00 0.52 388 390 2.00 0.58 402 403 1.00 2.18 509 518.5 9.50 1.68 521 522.03 1.03 1.18 533 534 1.00 0.61 542 554 12.00 1.22 560.5 564 3.50 1.15 568 569 1.00 5.77 584.61 586 1.39 0.71 643 644 1.00 3.26 CMRC2463D 516434 6709315 338 -59/269 31 32 1.00 2.31 40 49 9.00 1.20 63 64 1.00 0.88 83 84 1.00 13.90 96 98 2.00 1.62 186 193 7.00 0.58 201 202 1.00 1.24 216 217 1.00 0.77 252 253.06 1.06 0.54 289 292 3.00 0.42 335 336 1.00 0.76 387 392.61 5.61 3.76 401 438.39 37.39 1.45 460 461.18 1.18 1.26 508 510.8 2.80 0.97 514 516.91 2.91 0.68 CMRC2464D 517075 6710972 323 61/299 165 166 1.00 0.68 276 277 1.00 5.44 328 329 1.00 1.18 332 333 1.00 0.59 352 355 3.00 3.88 369.36 374 4.64 5.24
Page 53
53 Hole ID East North RL Dip/Azi From To Width Au g/t 381 382 1.00 0.74 386 390 4.00 2.87 403 404.8 1.80 1.55 408 409 1.00 1.27 412 413 1.00 0.88 417 418 1.00 1.69 421 422 1.00 1.80 432 433 1.00 0.76 436 439 3.00 3.55 446 447 1.00 1.31 483.5 486.28 2.78 0.80 493 497.27 4.27 0.44 500.5 503.79 3.29 0.80 509 514 5.00 1.43 531 532.8 1.80 0.77 536 537 1.00 1.02 546 548 2.00 0.53 586 587 1.00 2.23 CMRC2465D 516488 6709504 351 -61/297 18 20 2.00 0.68 49 50 1.00 2.48 70 71 1.00 3.17 80 81 1.00 1.69 97 99 2.00 0.72 106 108 2.00 0.63 CMRC2466D 516525 6709499 351 -61/267 19 21 2.00 0.63 57 61 4.00 2.30 67 68 1.00 0.80 108 109 1.00 1.27 137 138 1.00 3.32 151 152 1.00 2.24 167.92 171.63 3.71 0.82 178 179 1.00 0.56 182 183 1.00 0.76 187.36 191 3.64 0.43 206 208.02 2.02 1.17 213 216 3.00 0.76 219.27 221 1.73 0.85 226 230.5 4.50 1.09 262 268 6.00 2.22 277 280.45 3.45 0.95 301 303 2.00 0.58 309 310 1.00 0.90 314.19 318 3.81 1.00 375 376 1.00 0.63 440 442.85 2.85 4.28
Page 54
54 Hole ID East North RL Dip/Azi From To Width Au g/t 450 451 1.00 1.96 470.85 480 9.15 4.82 493 495 2.00 1.30 513 514 1.00 5.07 521.85 524 2.15 3.15 529 532 3.00 1.29 535 536 1.00 0.61 566 570 4.00 1.80 CMRC2467D 516932 6710817 330 -61/298 0 4 4.00 0.71 40 42 2.00 0.88 75 76 1.00 0.57 105 107 2.00 0.87 115 121 6.00 0.54 132 133.07 1.07 0.99 140 141 1.00 1.10 152 153 1.00 3.01 169.93 172.2 2.27 1.13 179 181 2.00 0.50 195.44 198 2.56 0.47 214 215 1.00 1.06 220 227.85 7.85 1.62 230 231 1.00 37.10 244 246.6 2.60 0.75 324.54 327.5 2.96 0.40 345 347.66 2.66 1.33 379 380 1.00 1.78 CMRC2468D 516780 6710514 342 -61/300 50 51 1.00 1.24 54 55 1.00 1.59 60 61 1.00 0.73 90 93 3.00 1.08 96 97 1.00 0.51 CMRC2469 516184 6706958 349 -61/270 79 80 1.00 2.54 115 116 1.00 1.68 123 124 1.00 1.75 CMRC2470 516086 6706533 345 -61/270 62 63 1.00 2.72 145 146 1.00 1.04 159 162 3.00 0.52 172 173 1.00 0.65 CMRC2471 516115 6706535 345 -62/273 44 45 1.00 0.51 79 80 1.00 0.64 140 141 1.00 6.46 148 153 5.00 0.49 181 196 15.00 14.61 199 200 1.00 0.53 CMRC2472 516083 6706485 345 -61/270 45 46 1.00 0.50
Page 55
55 Hole ID East North RL Dip/Azi From To Width Au g/t 84 85 1.00 0.68 104 107 3.00 6.01 143 146 3.00 0.68 204 205 1.00 0.68 CMRC2473 516105 6706484 345 -61/271 69 71 2.00 0.69 93 94 1.00 2.26 110 111 1.00 0.97 125 128 3.00 1.17 CMRC2474 516213 6706480 344 -60/270 101 102 1.00 1.02 CMRC2475 516263 6706436 344 -60/299 47 48 1.00 3.81 54 55 1.00 0.84 68 69 1.00 0.72 107 108 1.00 0.93 149 150 1.00 1.01 CMRC2476 516306 6706435 344 -61/271 37 41 4.00 1.17 72 73 1.00 0.82 CMRC2477 516359 6706434 343 -60/270 138 141 3.00 0.65 CMRC2478 516263 6706385 344 -60/270 42 45 3.00 0.97 48 49 1.00 0.88 90 91 1.00 0.65 98 100 2.00 0.71 CMRC2479 516307 6706389 344 -60/269 40 41 1.00 0.68 69 70 1.00 3.66 146 147 1.00 1.93 CMRC2481 516128 6706332 345 -60/267 29 30 1.00 0.61 100 101 1.00 1.41 114 116 2.00 0.79 133 136 3.00 13.93 146 147 1.00 1.24 CMRC2482 516186 6706338 345 -60/269 13 15 2.00 1.21 39 40 1.00 1.01 98 102 4.00 2.44 117 118 1.00 0.61 181 182 1.00 1.18 201 202 1.00 0.85 CMRC2484D 517054 6710382 327 -60/301 82 83 1.00 0.74 436 437 1.00 0.61 465 466 1.00 0.69 503.55 511 7.45 2.35 514 516 2.00 0.65 522 529.25 7.25 1.47 531.6 534 2.40 2.13 556 557 1.00 1.19 596 598.4 2.40 1.66 622.97 624 1.03 0.93
Page 56
56 Hole ID East North RL Dip/Azi From To Width Au g/t 635 638 3.00 0.46 643 645 2.00 1.42 696 699 3.00 1.03 715 716 1.00 0.65 732 733 1.00 0.79 736 739 3.00 0.78 743 744 1.00 1.28 755 756 1.00 0.51 762 763.07 1.07 2.21 769 770 1.00 0.51 777.77 781 3.23 3.61 814 815 1.00 4.54 822 823 1.00 1.25 826 828 2.00 0.63 839 840 1.00 1.10 855 862 7.00 5.35 870 873.53 3.53 1.17 875.8 879 3.20 0.61 886 889 3.00 1.43 910 912 2.00 2.20 922 923 1.00 0.73 CMRC2485D 517104 6710471 325 -61/300 354.07 356.1 2.03 1.12 398 399 1.00 0.76 505 506 1.00 0.78 531.5 532.63 1.13 1.17 553 554 1.00 1.59 570.89 572 1.11 0.61 575.9 581 5.10 1.30 583.92 587 3.08 0.97 591 592 1.00 5.18 596 602 6.00 1.43 605 608 3.00 1.76 611 618.2 7.20 1.67 626.44 628 1.56 1.26 630.1 633.92 3.82 0.64 637 639.1 2.10 1.14 666 667 1.00 0.63 672 674 2.00 0.72 690 691 1.00 0.56 777.5 781 3.50 1.40 792 794.5 2.50 0.53 797 802.69 5.69 1.00 808 814 6.00 0.57 877 888 11.00 1.82 905 906 1.00 0.64
Page 57
57 Hole ID East North RL Dip/Azi From To Width Au g/t 915 916 1.00 1.95 943 944 1.00 2.66 958 959 1.00 1.47 CMRC2486D 517155 6710555 324 -61/300 132 133 1.00 0.92 CMRC2487D 517205 6710642 323 -61/301 61 62 1.00 1.18 195 196 1.00 0.65 652.58 658 5.42 1.48 660.2 661.36 1.16 0.65 664 667 3.00 3.12 683 684 1.00 0.97 691 692 1.00 0.73 722.25 724 1.75 0.76 740 741 1.00 0.75 813 815 2.00 1.24 818 824 6.00 1.37 834 835 1.00 1.48 838 840 2.00 0.58 843.32 845 1.68 0.62 848.5 854 5.50 0.78 873.5 874.5 1.00 0.84 881.46 889 7.54 1.59 895 901.5 6.50 1.23 CMRC2488D 517254 6710728 323 -61/302 148 149 1.00 2.52 376 377 1.00 0.52 493 494 1.00 3.44 603 604 1.00 0.93 613.45 615.61 2.16 4.40 632.89 635.6 2.71 1.29 645.2 649 3.80 0.91 701 702 1.00 0.52 717 719.2 2.20 1.15 725.2 729 3.80 2.78 732.9 740 7.10 2.27 749 750 1.00 0.69 755 756 1.00 3.11 785 787.35 2.35 0.36 842.95 844 1.05 0.56 890 891 1.00 0.84 896.9 898 1.10 0.52 901.38 909.92 8.54 3.02 922 924.14 2.14 1.23 927 931.08 4.08 2.67 CMRC2491D 516466 6709966 337 -60/300 25 26 1.00 0.71 31 33 2.00 1.48 50 52 2.00 0.98
Page 58
58 Hole ID East North RL Dip/Azi From To Width Au g/t 55 59 4.00 0.47 62 64 2.00 1.36 94 96 2.00 2.42 132 133 1.00 0.77 140 144 4.00 1.27 147 156.35 9.35 1.43 161.58 164.85 3.27 1.62 192 193 1.00 0.75 205 206 1.00 1.89 214.76 217.12 2.36 0.59 224.46 229.69 5.23 2.18 235.5 240.04 4.54 0.72 247 248 1.00 0.62 258 259 1.00 0.58 271.4 274 2.60 1.48 293.5 295.73 2.23 0.92 302.02 310.8 8.78 2.38 318 321 3.00 1.18 328 329 1.00 2.26 336 337 1.00 4.35 CMRC2492D 516962 6710328 328 -60/299 1 4 3.00 0.83 230 232.57 2.57 1.32 311.32 312.52 1.20 1.03 314.6 318.09 3.49 0.65 362.27 370.45 8.18 5.33 382.59 396.6 14.01 3.79 408 409 1.00 0.54 415.59 417.13 1.54 12.86 434 435 1.00 1.19 445 446 1.00 1.13 467 468 1.00 0.69 504 508 4.00 0.94 518 522 4.00 0.73 525.86 527 1.14 0.63 533 534 1.00 4.51 540 541 1.00 0.76 545 550 5.00 1.81 562.6 563.8 1.20 0.71 566 568 2.00 1.13 607.9 614 6.10 0.82 629 632 3.00 3.62 643 644 1.00 0.76 661.48 664 2.52 0.65 681 694 13.00 5.17 743.91 746.1 2.19 0.81
Page 59
59 Hole ID East North RL Dip/Azi From To Width Au g/t 749 750 1.00 1.85 CMRC2493D 516979 6710439 327 -60/300 3 6 3.00 0.51 31 34 3.00 0.36 52 56 4.00 0.83 229.73 230.9 1.17 2.41 308.08 310 1.92 0.69 328 330 2.00 2.51 356.12 358.5 2.38 1.54 361 368.5 7.50 1.72 371.84 375 3.16 1.14 383 390.4 7.40 1.08 399 400 1.00 2.05 404 405 1.00 0.91 419 420 1.00 3.13 453.81 455.5 1.69 0.94 458 460 2.00 1.59 499 504 5.00 0.51 525 526 1.00 0.69 588.1 591.36 3.26 1.35 599 600 1.00 1.23 603 612 9.00 1.05 616.4 618.39 1.99 0.73 621 622 1.00 3.92 624.45 628 3.55 0.82 670 671 1.00 0.51 676 691 15.00 0.91 717.26 719 1.74 9.96 729.95 731 1.05 2.15 CMRC2494D 516466 6709800 338 -59/301 1 2 1.00 0.55 47 49 2.00 2.68 103 104 1.00 0.85 122 126 4.00 2.17 145 148 3.00 0.49 163 167 4.00 0.39 240.9 242 1.10 0.72 312 314.4 2.40 1.30 328.56 330 1.44 0.55 333 340 7.00 1.59 343 372 29.00 2.42 410 411 1.00 2.83 CMRC2495 516298 6705552 342 -60/269 39 41 2.00 0.63 45 46 1.00 1.42 51 52 1.00 0.62 114 120 6.00 0.70 200 201 1.00 0.57
Page 60
60 Hole ID East North RL Dip/Azi From To Width Au g/t CMRC2498 516174 6705602 343 -60/271 15 17 2.00 3.26 50 51 1.00 0.51 60 61 1.00 0.51 CMRC2499 516199 6705602 343 -60/270 46 48 2.00 2.05 82 83 1.00 0.53 CMRC2500 516199 6705625 343 -61/271 44 47 3.00 3.07 50 51 1.00 0.58 59 61 2.00 1.42 CMRC2502 516148 6705651 343 -60/267 83 84 1.00 1.19 CMRC2503 516172 6705651 343 -61/270 78 79 1.00 0.73 CMRC2505 516144 6705676 344 -60/267 45 46 1.00 0.59 CMRC2506 516124 6705701 344 -61/270 38 39 1.00 1.24 CMRC2509 516144 6705751 344 -61/270 48 53 5.00 2.52 CMRC2511 516194 6705749 344 -61/272 53 54 1.00 1.40 68 69 1.00 1.22 72 74 2.00 1.17 93 95 2.00 1.45 CMRC2513 516148 6705725 344 -61/272 44 45 1.00 2.68 CMRC2514 516131 6705774 344 -61/271 36 39 3.00 2.16 CMRC2515 516148 6705774 344 -61/271 40 41 1.00 2.21 49 51 2.00 0.93 61 62 1.00 2.02 CMRC2516 516172 6705773 344 -60/272 44 47 3.00 8.50 60 61 1.00 0.61 80 81 1.00 0.60 84 85 1.00 0.94 CMRC2517 516196 6705773 344 -60/272 60 61 1.00 0.74 78 79 1.00 2.64 82 83 1.00 0.57 106 111 5.00 1.23 CMRC2520 516172 6705799 344 -61/270 94 95 1.00 20.50 CMRC2521 516193 6705793 344 -61/272 60 61 1.00 1.06 79 81 2.00 6.20 107 108 1.00 0.83 111 112 1.00 0.82 CMRC2524D 516512 6709714 342 -61/299 29 34 5.00 1.50 37 40 3.00 1.14 46 57 11.00 1.13 60 61 1.00 0.78 64 71 7.00 0.74 82 86 4.00 3.36 89 90 1.00 3.36 95 96 1.00 0.79 120 121 1.00 0.51 132 133 1.00 0.73
Page 61
61 Hole ID East North RL Dip/Azi From To Width Au g/t 142 143 1.00 3.16 167 172 5.00 0.84 CMRC2525 516224 6705977 344 -61/269 119 120 1.00 0.81 127 128 1.00 0.54 132 138 6.00 1.12 CMRC2526 516273 6705977 344 -60/270 32 33 1.00 1.15 CMRC2533D 516491 6709768 340 -60/300 19 23 4.00 0.57 56 57 1.00 2.67 68 69 1.00 0.51 84 85 1.00 0.85 90 91 1.00 1.24 139 140 1.00 0.74 CMRC2534D 516213 6708800 339 -60/271 28 29 1.00 0.79 32 35 3.00 1.84 103 105 2.00 4.63 115 116 1.00 1.83 120 121 1.00 0.62 161 162 1.00 1.08 185.7 190.73 5.03 1.56 194.19 195.55 1.36 1.64 230 231 1.00 2.17 246 248.67 2.67 0.99 251 257 6.00 3.28 264 280 16.00 1.67 321 322 1.00 0.55 330 333.24 3.24 0.73 344 345 1.00 27.20 380 381 1.00 2.70 387 394 7.00 0.93 CMRC2534DW1 516213 6708800 339 -60/271 210 211 1.00 0.91 214 215 1.00 0.56 218.56 221.25 2.69 1.03 229 230 1.00 0.50 233 234 1.00 0.85 239 241 2.00 1.01 249 250 1.00 1.47 253 259.77 6.77 0.97 262.27 265 2.73 2.25 272 275 3.00 0.71 278 279 1.00 0.91 287 288 1.00 0.73 291 294 3.00 0.48 325 326.51 1.51 0.55 376 377 1.00 0.57 CMRC2535D 516201 6708701 343 -61/269 1 3 2.00 1.05
Page 62
62 Hole ID East North RL Dip/Azi From To Width Au g/t 30 39 9.00 3.09 62 76 14.00 2.72 93 94 1.00 1.20 140 141 1.00 0.59 CMRC2536D 516195 6708645 344 -58/270 28 29 1.00 19.85 47 50 3.00 0.62 56 57 1.00 0.96 70 78 8.00 2.45 96 97 1.00 0.78 126 127 1.00 0.64 134 138 4.00 0.61 177 178 1.00 0.51 CMRC2537D 516113 6708606 347 -60/271 19 21 2.00 0.75 27 38 11.00 1.63 52 53 1.00 0.61 73 75 2.00 5.71 86 90 4.00 0.55 96 97 1.00 0.51 134 135 1.00 0.55 142 143 1.00 0.96 161 162 1.00 16.00 CMRC2538D 516132 6708553 346 -61/271 2 4 2.00 0.68 43 45 2.00 2.90 48 49 1.00 0.79 82 83 1.00 0.69 CMRC2539D 516114 6708508 346 -60/271 43 48 5.00 1.63 65 66 1.00 14.10 75 76 1.00 0.97 126.12 131 4.88 0.45 CMRC3023 541949 6784198 316 -61/344 257 259 2.00 2.94 263 264 1.00 1.19 CMRC3024 541989 6784202 316 -60/342 20 21 1.00 0.63 242 248 6.00 2.24 253 254 1.00 1.43 288 289 1.00 0.78 300 301 1.00 0.83 CMRC3025 542019 6784248 317 -60/347 154 155 1.00 0.51 183 184 1.00 1.31 194 195 1.00 0.67 207 208 1.00 1.43 218 219 1.00 0.76 CMRC3026 542030 6784207 316 -60/344 33 34 1.00 0.85 218 232 14.00 1.06 238 246 8.00 0.62 CMRC3027 542351 6784341 311 -61/345 0 1 1.00 0.67
Page 63
63 Hole ID East North RL Dip/Azi From To Width Au g/t CMRC3029D 517001 6711014 327 -61/299 69 72 3.00 1.16 85 87 2.00 0.83 90 91 1.00 8.49 102 103 1.00 2.38 127 129.44 2.44 0.56 137 138 1.00 2.30 151.5 154.05 2.55 0.53 167.29 170.7 3.41 3.62 198.5 206 7.50 3.99 228 229 1.00 0.79 267.9 269 1.10 0.52 305.79 313.23 7.44 0.80 317.11 320.89 3.78 1.08 323.67 325.87 2.20 0.85 334 336 2.00 5.41 343 344.5 1.50 0.65 349 350 1.00 1.03 369.34 372.32 2.98 0.37 CMRC3030D 516959 6710664 338 -62/300 11 12 1.00 0.85 162 171 9.00 0.41 181 182 1.00 0.58 187 188 1.00 0.65 196 197 1.00 1.63 211 212 1.00 3.40 223 224 1.00 1.10 251.85 253.5 1.65 8.69 267 268 1.00 1.13 271 272 1.00 1.11 286 289 3.00 0.68 296 302 6.00 1.31 319 321 2.00 0.61 326 329 3.00 0.69 338 339 1.00 1.10 452 453 1.00 1.05 464 472.4 8.40 3.30 475 484.2 9.20 5.70 507 508 1.00 0.53 CMRC3031D 516466 6708725 344 -60/271 5 7 2.00 0.84 45 46 1.00 2.10 49 53 4.00 0.75 66 69 3.00 1.08 78 83 5.00 0.93 87 89 2.00 2.35 108 109 1.00 1.02 125 126 1.00 0.54
Page 64
64 Hole ID East North RL Dip/Azi From To Width Au g/t 155 156 1.00 0.51 189 190.41 1.41 4.67 213 218 5.00 1.22 220.6 222 1.40 0.60 268.68 272.5 3.82 0.58 282 285.49 3.49 1.00 289.27 292 2.73 0.82 310 313 3.00 0.45 CMRC3032D 516500 6708799 343 -64/272 58 63 5.00 0.57 73 74 1.00 0.57 86 88 2.00 0.62 92 102 10.00 0.98 105 110 5.00 1.49 146 149 3.00 9.00 296.45 302 5.55 0.87 309 310 1.00 0.82 312.5 313.6 1.10 0.63 327.57 332.13 4.56 1.79 340 344 4.00 0.49 356 357 1.00 0.57 364 365 1.00 2.49 383 384 1.00 1.10 400 402 2.00 1.73 531.38 552 20.62 1.23 568 572.85 4.85 0.59 576 581 5.00 1.20 585 587 2.00 4.11 599 600 1.00 0.91 618 619 1.00 0.76 625 626 1.00 0.50 639 640 1.00 0.72 646 648.9 2.90 1.56 658 668 10.00 1.82 706 707 1.00 2.50 CMRC3033D 516515 6708850 342 -61/272 30 31 1.00 1.03 73 76 3.00 0.87 97 107 10.00 1.42 164 165 1.00 0.61 212 213 1.00 0.55 273.67 279.46 5.79 1.08 283.59 285.85 2.26 1.98 327 328 1.00 1.00 335.7 341.5 5.80 0.88 362 365 3.00 1.24 435 436 1.00 0.69
Page 65
65 Hole ID East North RL Dip/Azi From To Width Au g/t 521.94 536 14.06 1.42 543 544 1.00 3.60 548 553 5.00 0.73 567 574 7.00 1.19 596.2 601 4.80 1.40 609.95 611 1.05 0.86 655 657.88 2.88 1.27 664 666 2.00 18.87 CMRC3033DW 516515 6708850 342 -61/272 300 302 2.00 0.98 334.28 337.57 3.29 0.98 350.06 353.3 3.24 1.04 359.68 361.5 1.82 2.70 379 380 1.00 0.52 419 422.23 3.23 1.01 425 428 3.00 0.67 527 534 7.00 0.74 542.53 549 6.47 0.60 553 554 1.00 0.59 556.8 557.85 1.05 1.27 573 574 1.00 1.25 584.36 586.2 1.84 1.20 590 591 1.00 0.71 605 606.12 1.12 0.76 624.11 636 11.89 3.78 653 654.75 1.75 1.77 CMRC3033DW2 516515 6708850 342 -61/272 283.53 288.5 4.97 0.92 299.6 300.79 1.19 0.81 322 323 1.00 0.92 333.22 335 1.78 1.07 348.89 353.1 4.21 0.57 357 360 3.00 4.94 370 371 1.00 8.16 416 417 1.00 1.33 532.17 534 1.83 0.92 576.94 590 13.06 3.63 595.82 597 1.18 1.10 611.6 615 3.40 2.51 641.26 648.28 7.02 6.33 657 658 1.00 0.86 CMRC3034 542133 6784226 315 -61/345 30 31 1.00 0.66 223 225 2.00 7.62 239 258 19.00 4.38 CMRC3035 542143 6784204 315 -60/345 233 234 1.00 1.07 251 253 2.00 0.69 256 274 18.00 4.48
Page 66
66 Hole ID East North RL Dip/Azi From To Width Au g/t CMRC3036 542211 6784249 315 -62/345 7 8 1.00 0.63 202 205 3.00 0.97 217 220 3.00 1.13 226 228 2.00 1.02 231 232 1.00 0.51 235 238 3.00 2.84 254 259 5.00 0.79 263 264 1.00 0.95 CMRC3037 542217 6784230 314 -61/344 263 268 5.00 0.69 273 275 2.00 0.85 319 323 4.00 1.50 329 330 1.00 0.79 CMRC3038 542174 6784236 316 -61/346 198 202 4.00 1.40 223 226 3.00 1.41 242 252 10.00 1.05 270 271 1.00 4.31 275 286 11.00 1.01 CMRC3039 542177 6784219 314 -61/345 48 49 1.00 1.82 271 276 5.00 1.11 279 281 2.00 0.75 303 304 1.00 0.58 316 317 1.00 0.77 322 323 1.00 0.68 327 328 1.00 0.80 CMRC3041 542284 6784276 314 -61/345 210 219 9.00 0.76 CMRC3042 542292 6784254 312 -60/345 225 226 1.00 0.57 230 235 5.00 0.85 254 255 1.00 0.57 270 275 5.00 1.16 280 283 3.00 0.64 287 288 1.00 0.73 297 306 9.00 0.70 CMRC3045 542089 6784235 316 -60/345 13 14 1.00 0.65 199 204 5.00 1.28 CMRC3046 542434 6784342 309 -60/345 145 147 2.00 0.58 CMRC3047 542482 6784411 310 -61/345 74 78 4.00 0.93 96 98 2.00 0.53 CMRC3049 542554 6784449 310 -62/345 69 71 2.00 0.93 111 112 1.00 0.69 CMRC3050 542560 6784429 309 -60/343 112 113 1.00 1.72 118 119 1.00 1.76 129 134 5.00 1.33 144 147 3.00 0.47 171 173 2.00 0.91 CMRC3051 542602 6784459 310 -61/346 110 112 2.00 1.72
Page 67
67 Hole ID East North RL Dip/Azi From To Width Au g/t 116 117 1.00 0.59 125 128 3.00 0.60 143 144 1.00 0.55 CMRC3053 516256 6706484 344 -61/272 41 42 1.00 0.79 47 49 2.00 7.55 58 59 1.00 0.50 112 115 3.00 2.93 CMRC3054 516158 6706486 344 -60/269 46 47 1.00 0.64 87 88 1.00 0.97 94 95 1.00 0.59 99 100 1.00 0.81 118 119 1.00 0.78 174 177 3.00 2.91 187 188 1.00 0.64 205 206 1.00 0.51 223 224 1.00 0.53 239 240 1.00 0.78 CMRC3055 516131 6706236 344 -60/271 46 48 2.00 1.48 102 103 1.00 3.45 157 158 1.00 0.76 162 163 1.00 0.86 CMRC3056 516185 6706235 344 -61/270 79 80 1.00 0.52 CMRC3058 516327 6706233 343 -60/269 104 107 3.00 0.56 120 121 1.00 0.56 138 141 3.00 11.72 144 145 1.00 3.25 CMRC3059 516305 6706285 343 -62/269 89 91 2.00 1.09 110 111 1.00 0.95 123 134 11.00 2.92 139 141 2.00 2.15 CMRC3061 516262 6706335 343 -59/271 92 93 1.00 0.68 CMRC3062 516307 6706333 343 -64/271 84 85 1.00 0.50 CMRC3064 516073 6706030 345 -62/271 36 38 2.00 0.54 CMRC3076 542408 6785054 328 -60/325 104 108 4.00 0.59 CMRC3077 542439 6785019 324 -59/325 116 120 4.00 3.50 CMRC3081 543045 6784706 317 -61/323 60 64 4.00 0.51 80 84 4.00 0.66
Page 68
68 Orion Underground Significant intercepts table of Orion UG assay drill intersections using a 1.0 g/t Au cut-off, with a minimum width of 1 meter and a maximum of 2 meters of consecutive internal waste. Hole ID East North RL Dip/Azi From To Width Au g/t CMAC1451 515801 6708439 355 -60/0 1 2 1.00 1.14 CMAC1477 515451 6708596 358 -60/270 28 34 6.00 1.26 CMRC1671 516495 6705428 351 -60/270 3 4 1.00 1.38 CMRC1672 516591 6705431 351 -60/270 3 4 1.00 1.37 CMRC1674 516543 6705323 361 -60/270 6 7 1.00 2.18 CMRC1676 516623 6705122 352 -61/270 108 112 4.00 1.00 CMRC1740D 516598 6709537 350 -61/299 84 85 1.00 2.99 124 125 1.00 1.77 128 129 1.00 1.21 331 341 10.50 4.10 357 359 1.77 2.11 395 396 1.00 35.20 412 420 7.98 1.81 CMRC1785 516117 6707308 355 -60/270 67 68 1.00 3.23 CMRC1786 516091 6707283 355 -60/270 49 50 1.00 3.19 CMRC1787 516114 6707259 354 -60/270 61 65 4.00 17.98 141 142 1.00 1.09 147 148 1.00 2.47 CMRC1788 516140 6707285 356 -60/270 101 103 2.00 1.67 CMRC1789 516173 6706681 345 -60/270 109 110 1.00 93.60 113 114 1.00 2.64 CMRC1790 516223 6706682 345 -60/270 96 97 1.00 2.21 CMRC1791 516119 6706577 345 -60/270 60 61 1.00 1.88 CMRC1792 516132 6706174 344 -60/270 44 45 1.00 1.39 91 93 2.00 3.53 CMRC1794 516284 6706151 343 -60/270 43 44 1.00 7.53 96 100 4.00 1.18 CMRC1795 516271 6706101 343 -60/270 36 38 2.00 3.70 44 46 2.00 2.36 110 111 1.00 2.37 CMRC1796 516283 6706070 343 -60/270 42 43 1.00 2.16 48 51 3.00 4.11 CMRC1798 516231 6705869 343 -60/270 91 93 2.00 3.14 CMRC1799 516283 6705866 343 -60/270 41 42 1.00 1.60 CMRC1801 516081 6707174 353 -60/270 1 2 1.00 2.84 10 12 2.00 9.10 22 24 2.00 2.60 46 47 1.00 1.90 85 91 6.00 1.45 CMRC1802 516490 6704773 339 -61/270 113 114 1.00 2.00 131 132 1.00 1.41 CMRC1804 516457 6704714 339 -60/270 76 77 1.00 4.01
Page 69
69 Hole ID East North RL Dip/Azi From To Width Au g/t CMRC1805 516500 6704726 339 -60/270 46 47 1.00 1.83 72 73 1.00 1.59 106 107 1.00 2.31 122 126 4.00 2.91 CMRC1807 516485 6704678 339 -60/270 66 67 1.00 5.33 74 75 1.00 1.41 CMRC1910D 516531 6709219 337 -61/0 81 83 2.00 3.86 88 89 1.00 11.60 331 332 1.40 1.55 466 467 1.22 1.12 504 513 8.69 3.24 521 523 2.01 3.16 529 546 17.00 1.22 CMRC1920D 516426 6708744 341 -61/272 3 6 3.00 1.54 111 112 1.00 1.35 155 156 1.00 1.68 233 237 3.25 2.02 244 247 2.56 3.66 289 291 2.00 1.76 305 307 1.60 2.09 412 413 1.52 19.03 461 464 2.50 5.02 535 541 6.46 1.64 614 617 2.68 4.65 CMRC1922D 516530 6709343 336 -61/271 28 30 2.00 6.79 118 123 5.00 7.69 277 281 3.70 1.99 312 316 4.00 1.51 330 331 1.00 1.09 488 489 1.00 2.64 505 513 7.62 1.68 517 518 1.00 2.47 550 551 1.00 1.50 554 556 1.50 3.33 CMRC1923D 516405 6709539 351 -68/299 48 49 1.00 2.85 55 68 13.00 2.59 73 75 2.00 1.61 81 82 1.00 1.45 119 120 1.00 2.63 135 136 1.00 1.15 224 225 1.01 1.30 309 310 1.22 1.25 351 352 1.00 1.02 375 382 7.32 2.86 418 426 8.00 2.86
Page 70
70 Hole ID East North RL Dip/Azi From To Width Au g/t 470 471 1.00 1.31 CMRC1924D 516450 6709553 350 -63/300 54 57 3.00 1.10 64 65 1.00 2.72 81 82 1.00 1.64 88 92 4.00 1.04 97 98 1.00 1.07 109 110 1.00 4.60 116 118 2.00 5.43 121 122 1.00 1.07 408 409 1.50 10.50 412 414 2.15 4.28 420 428 7.71 2.43 438 440 2.44 1.48 456 460 4.03 8.69 467 468 1.10 1.20 522 523 1.00 1.69 CMRC1924DW 516449 6709556 350 -63/300 381 383 2.12 1.39 401 415 14.00 1.93 418 425 7.00 3.26 429 435 5.90 2.84 444 451 6.30 2.38 CMRC1929D 516402 6709765 341 -61/180 52 53 1.00 1.61 67 68 1.00 2.76 89 91 2.00 1.80 97 98 1.00 1.25 256 257 1.00 1.04 272 273 1.00 1.11 279 283 4.00 1.73 287 289 2.00 5.24 292 293 1.00 1.18 298 303 5.18 7.21 306 307 1.43 2.18 314 323 8.50 3.22 326 330 3.39 2.60 332 334 2.37 4.73 CMRC1930D 516402 6709737 340 -62/0 63 64 1.00 1.74 75 76 1.00 1.38 89 91 2.00 5.04 114 115 1.00 1.31 319 320 1.00 1.27 327 339 11.56 4.75 342 346 3.64 8.24 350 360 10.55 4.33 364 370 6.29 2.40 CMRC1931D 516369 6709745 342 -60/180 137 138 1.00 5.91
Page 71
71 Hole ID East North RL Dip/Azi From To Width Au g/t 178 180 2.46 1.57 186 187 1.00 2.53 217 232 15.22 1.15 238 239 1.00 1.08 248 251 3.50 1.04 263 267 4.00 1.26 CMRC1932D 516417 6709648 347 -61/301 329 330 1.00 1.07 340 342 1.72 4.23 351 352 1.13 1.99 356 369 13.00 1.15 372 378 5.90 3.64 395 399 4.50 3.53 402 404 1.94 11.73 CMRC1933D 516381 6708781 343 -59/180 154 155 1.00 1.04 161 162 1.00 1.21 174 179 5.00 1.35 382 383 1.10 2.44 421 424 3.00 3.10 448 451 3.12 1.43 455 457 2.23 11.80 464 465 1.00 1.38 469 473 3.70 3.73 495 496 1.00 1.74 515 516 1.00 1.05 CMRC1934D 516376 6709002 339 -60/180 22 23 1.00 1.02 34 35 1.00 1.47 112 113 1.00 1.74 136 140 4.00 0.98 158 162 4.00 3.15 172 173 1.00 3.28 218 220 1.55 2.81 222 226 4.00 3.08 237 238 1.00 1.27 291 293 2.22 1.90 311 313 2.00 2.12 402 417 14.52 3.45 420 421 1.00 5.26 435 440 4.46 3.71 442 443 1.00 7.87 476 477 1.32 2.58 525 526 1.00 1.67 CMRC1935D 516457 6709845 337 -63/300 22 23 1.00 2.40 41 42 1.00 1.17 55 56 1.00 11.95 96 97 1.00 1.13
Page 72
72 Hole ID East North RL Dip/Azi From To Width Au g/t 139 142 3.00 1.34 149 150 1.00 49.00 329 334 4.89 2.02 356 361 5.50 3.90 366 369 3.50 3.68 CMRC1952 516305 6707054 350 -60/270 44 47 3.00 1.42 75 76 1.00 2.01 94 95 1.00 3.91 110 111 1.00 1.51 CMRC1953 516341 6707054 351 -60/270 50 51 1.00 2.80 56 57 1.00 4.10 60 61 1.00 4.72 72 73 1.00 3.18 82 83 1.00 1.61 88 95 7.00 5.53 121 122 1.00 1.21 131 132 1.00 2.67 136 137 1.00 1.50 CMRC1954 516141 6706904 348 -60/270 53 54 1.00 2.19 112 115 3.00 2.02 CMRC1956 516158 6706759 346 -60/270 96 97 1.00 1.83 109 110 1.00 2.43 CMRC1957 516169 6706704 345 -60/270 44 45 1.00 1.12 115 117 2.00 3.22 122 124 2.00 1.75 CMRC1958 516304 6706048 343 -60/270 69 70 1.00 1.63 89 90 1.00 1.33 CMRC1964 516305 6706200 343 -60/270 105 106 1.00 1.19 CMRC1965 516303 6706252 343 -60/270 76 80 4.00 3.38 95 105 10.00 2.12 CMRC1968 516251 6706103 344 -60/270 31 32 1.00 1.38 72 73 1.00 1.59 CMRC1969 516142 6706169 344 -60/270 94 95 1.00 1.49 CMRC1971 516134 6706284 344 -61/272 100 101 1.00 1.27 CMRC1972 516152 6706319 344 -62/270 45 47 2.00 4.10 53 54 1.00 1.14 59 60 1.00 1.22 CMRC1973 516140 6706342 345 -60/270 44 49 5.00 3.30 CMRC1974 516145 6706410 344 -60/270 67 68 1.00 1.30 89 90 1.00 3.01 CMRC1975 516144 6706375 344 -60/270 56 63 7.00 1.97 66 67 1.00 1.48 98 99 1.00 1.17 CMRC1976 516092 6707372 357 -60/270 42 43 1.00 2.05 51 54 3.00 7.34
Page 73
73 Hole ID East North RL Dip/Azi From To Width Au g/t 116 117 1.00 3.61 126 127 1.00 1.88 130 131 1.00 1.19 144 145 1.00 1.77 CMRC1977 516077 6707323 356 -60/270 0 1 1.00 3.05 104 105 1.00 1.10 108 109 1.00 1.28 112 114 2.00 4.93 CMRC1978 516277 6706899 346 -59/269 41 43 2.00 1.39 CMRC1979 516258 6706899 346 -61/271 56 58 2.00 2.83 CMRC1980 516144 6706679 345 -61/270 49 50 1.00 1.00 CMRC1981 516190 6706679 345 -60/270 46 47 1.00 1.13 53 54 1.00 1.59 92 93 1.00 1.18 126 128 2.00 2.97 CMRC1983 516362 6706577 344 -61/274 137 138 1.00 2.10 175 176 1.00 1.10 200 201 1.00 1.12 213 214 1.00 2.01 CMRC1984 516359 6706534 344 -60/271 49 50 1.00 1.08 66 71 5.00 2.06 174 179 5.00 1.40 CMRC1988 516168 6705723 344 -60/270 63 64 1.00 1.26 CMRC1989 516228 6705679 343 -61/271 42 43 1.00 1.03 58 59 1.00 1.66 62 63 1.00 5.36 100 101 1.00 1.68 114 117 3.00 11.53 CMRC1990 516229 6705655 343 -61/269 41 43 2.00 1.58 47 49 2.00 1.54 94 95 1.00 1.04 CMRC2308 515623 6709593 353 -60/269 6 7 1.00 1.32 CMRC2310 515825 6709587 361 -60/270 3 4 1.00 2.87 CMRC2311 515927 6709597 361 -59/269 8 9 1.00 25.90 CMRC2314 515822 6709497 365 -60/269 11 12 1.00 3.32 CMRC2317 515723 6709388 373 -60/269 28 29 1.00 1.01 CMRC2334 515527 6709193 363 -61/270 16 19 3.00 2.60 CMRC2335 515620 6709195 363 -59/270 3 7 4.00 0.79 CMRC2336 515729 6709195 369 -60/271 13 16 3.00 0.93 CMRC2337 515835 6709197 365 -60/270 9 10 1.00 4.03 CMRC2343 515923 6709289 361 -59/269 7 13 6.00 2.26 50 51 1.00 1.59 CMRC2368D 516447 6708714 344 -61/270 30 32 2.00 1.94 195 196 1.00 5.38 216 218 2.00 13.87
Page 74
74 Hole ID East North RL Dip/Azi From To Width Au g/t 221 224 3.00 0.95 233 234 1.00 3.42 237 238 1.00 1.68 291 295 3.50 1.47 349 350 1.00 1.15 429 430 1.20 4.92 531 535 3.78 4.99 539 543 3.60 0.77 545 547 1.65 2.53 557 563 6.55 1.95 567 569 1.30 5.76 663 664 1.20 1.02 CMRC2382D 516527 6709370 334 -71/273 258 259 1.00 1.22 295 297 1.10 1.54 306 308 1.50 6.06 501 508 6.81 3.98 CMRC2382DW 516530 6709369 334 -60/270 300 302 2.00 1.59 355 356 1.00 1.62 394 396 2.00 2.24 483 492 8.50 2.31 514 518 4.00 1.87 533 535 2.32 4.44 556 557 1.00 1.98 CMRC2384D 516417 6709600 350 -60/297 24 25 1.00 2.31 52 54 2.00 1.30 57 58 1.00 1.28 366 370 4.20 1.45 385 389 3.64 5.57 409 419 9.79 2.15 422 424 2.50 0.88 CMRC2384DW 516417 6709600 350 -60/297 355 357 1.06 4.10 374 375 1.26 2.84 380 381 1.25 3.23 391 404 13.31 1.79 CMRC2385D 516428 6709562 350 -61/269 32 36 4.00 0.67 55 57 2.00 8.80 69 73 4.00 1.44 92 98 6.00 2.70 128 130 1.78 1.05 371 372 1.15 3.11 378 382 4.88 1.61 390 394 3.25 2.38 406 410 4.00 2.21 432 435 2.50 1.57 CMRC2404D 516382 6709665 343 -60/297 110 111 1.00 3.15
Page 75
75 Hole ID East North RL Dip/Azi From To Width Au g/t 336 345 8.77 2.00 353 361 8.09 3.36 CMRC2423D 516398 6709617 348 -61/299 43 44 1.00 2.97 266 269 3.40 1.32 298 300 1.66 1.56 336 348 11.89 2.46 357 374 17.47 1.89 378 381 3.92 1.76 395 396 1.00 1.03 406 407 1.00 1.56 CMRC2423DW 516395 6709614 348 -61/301 291 292 1.00 3.30 308 309 1.00 1.97 320 321 1.40 2.36 326 332 6.00 1.41 340 349 8.50 2.90 355 358 3.00 1.58 363 366 2.57 1.77 374 376 2.00 1.22 416 417 1.00 1.51 432 437 4.86 8.48 CMRC2424D 516438 6708526 346 -61/270 70 74 4.00 0.72 82 83 1.00 5.44 99 100 1.00 1.17 131 132 1.00 1.42 219 222 2.11 0.83 300 307 7.00 2.36 311 312 1.00 2.40 339 341 2.00 1.26 345 346 1.00 1.29 355 356 1.00 2.67 377 378 1.00 1.40 CMRC2431D 516359 6709636 343 -62/301 238 239 1.00 2.02 252 256 4.04 5.58 260 265 5.00 1.88 270 277 7.00 3.39 290 292 1.80 2.39 298 301 3.00 0.52 326 327 1.00 1.23 CMRC2432D 516416 6709575 350 -60/300 50 51 1.00 1.49 55 57 2.00 1.46 144 145 1.00 1.03 CMRC2433D 516454 6709622 350 -60/301 57 58 1.00 1.71 66 69 3.00 2.58 109 111 2.00 2.21 432 436 3.84 0.89
Page 76
76 Hole ID East North RL Dip/Azi From To Width Au g/t 453 456 3.00 1.10 462 463 1.00 1.73 466 467 1.00 6.73 CMRC2437D 516550 6709396 339 -63/270 59 60 1.00 2.16 179 182 3.00 1.27 257 258 1.00 2.48 267 268 1.00 3.00 275 279 4.05 18.51 284 285 1.00 1.19 289 291 2.26 0.95 311 312 1.00 1.03 317 318 1.00 2.88 339 340 1.00 5.07 352 353 1.19 1.83 361 362 1.00 1.03 407 408 1.00 2.32 455 456 1.07 7.52 516 524 8.00 0.88 570 571 1.00 2.40 594 595 1.00 1.09 CMRC2438D 516390 6709541 349 -60/299 41 42 1.00 1.09 49 50 1.00 2.48 90 94 4.00 0.92 101 102 1.00 2.44 252 253 1.36 1.35 268 269 1.05 2.38 316 317 1.43 7.50 339 343 4.85 3.74 387 389 1.50 5.78 392 395 3.50 2.41 448 449 1.00 1.31 CMRC2439D 516383 6709598 347 -60/300 40 43 3.00 1.37 49 50 1.00 1.07 CMRC2447 516662 6704588 338 -61/299 103 104 1.00 1.10 121 122 1.00 1.25 CMRC2448 516741 6704495 337 -61/299 65 66 1.00 3.02 CMRC2449 516751 6704468 336 -61/299 38 40 2.00 2.61 52 57 5.00 2.01 72 73 1.00 1.21 80 81 1.00 1.62 86 87 1.00 1.06 CMRC2451 516324 6705452 343 -60/299 176 178 2.00 2.93 188 189 1.00 1.72 CMRC2452 516174 6705502 343 -60/299 13 14 1.00 4.57 CMRC2453 516199 6705502 343 -60/299 47 48 1.00 1.60
Page 77
77 Hole ID East North RL Dip/Azi From To Width Au g/t CMRC2457 516249 6705550 343 -60/273 109 110 1.00 1.33 CMRC2458 516275 6705552 343 -61/271 96 98 2.00 1.87 116 117 1.00 2.77 CMRC2459D 516452 6709029 338 -60/268 26 27 1.00 2.20 37 38 1.00 1.18 49 50 1.00 4.80 60 65 5.00 2.41 91 92 1.00 1.58 112 117 5.00 1.74 124 126 2.00 1.75 135 136 1.00 3.14 256 258 2.30 4.02 287 288 1.06 1.22 309 311 2.00 1.13 409 414 4.56 1.41 427 431 4.10 3.19 452 453 1.00 23.70 472 473 1.00 1.48 497 500 2.63 2.46 521 525 4.00 4.56 CMRC2460D 516515 6709063 339 -60/268 39 40 1.00 3.06 53 54 1.00 1.24 64 65 1.00 1.38 116 118 2.00 2.76 160 162 2.00 1.19 215 218 3.14 0.73 282 283 1.00 5.60 287 288 1.00 1.78 294 295 1.00 1.29 CMRC2460DW 516515 6709063 339 -60/268 200 202 2.00 1.12 CMRC2461D 516531 6709239 337 -60/264 24 25 1.00 1.25 CMRC2462D 516534 6709315 337 -60/268 39 42 3.00 1.58 66 67 1.00 1.34 160 161 1.00 1.30 206 207 1.00 1.07 307 308 1.00 2.35 327 328 1.00 4.19 355 356 1.00 3.90 402 403 1.00 2.18 509 516 7.00 2.10 521 522 1.03 1.18 542 553 10.50 1.30 561 564 3.00 1.20 568 569 1.00 5.77 643 644 1.00 3.26
Page 78
78 Hole ID East North RL Dip/Azi From To Width Au g/t CMRC2463D 516434 6709315 338 -59/269 31 32 1.00 2.31 40 49 9.00 1.20 83 84 1.00 13.90 96 97 1.00 2.46 201 202 1.00 1.24 389 393 4.10 4.98 405 406 1.00 1.03 409 438 29.39 1.71 460 461 1.18 1.26 514 517 2.91 0.68 CMRC2465D 516488 6709504 351 -61/297 49 50 1.00 2.48 70 71 1.00 3.17 80 81 1.00 1.69 CMRC2466D 516525 6709499 351 -61/267 57 60 3.00 2.87 108 109 1.00 1.27 137 138 1.00 3.32 151 152 1.00 2.24 207 208 1.02 1.43 227 231 4.00 1.16 264 268 4.00 3.16 277 280 3.45 0.95 317 318 1.00 1.15 440 443 2.85 4.28 450 451 1.00 1.96 471 478 7.59 5.66 493 495 2.00 1.30 513 514 1.00 5.07 522 523 1.15 5.39 529 531 2.00 1.65 567 569 2.00 3.02 CMRC2469 516184 6706958 349 -61/270 79 80 1.00 2.54 115 116 1.00 1.68 123 124 1.00 1.75 CMRC2470 516086 6706533 345 -61/270 62 63 1.00 2.72 145 146 1.00 1.04 CMRC2471 516115 6706535 345 -62/273 140 141 1.00 6.46 181 189 8.00 26.16 193 195 2.00 3.33 CMRC2472 516083 6706485 345 -61/270 104 106 2.00 8.65 CMRC2473 516105 6706484 345 -61/271 93 94 1.00 2.26 127 128 1.00 2.54 CMRC2474 516213 6706480 344 -60/270 101 102 1.00 1.02 CMRC2475 516263 6706436 344 -60/299 47 48 1.00 3.81 149 150 1.00 1.01 CMRC2476 516306 6706435 344 -61/271 38 39 1.00 2.45
Page 79
79 Hole ID East North RL Dip/Azi From To Width Au g/t CMRC2477 516359 6706434 343 -60/270 140 141 1.00 1.39 CMRC2478 516263 6706385 344 -60/270 42 43 1.00 1.22 CMRC2479 516307 6706389 344 -60/269 69 70 1.00 3.66 146 147 1.00 1.93 CMRC2481 516128 6706332 345 -60/267 100 101 1.00 1.41 133 136 3.00 13.93 146 147 1.00 1.24 CMRC2482 516186 6706338 345 -60/269 13 14 1.00 1.62 39 40 1.00 1.01 98 100 2.00 4.21 181 182 1.00 1.18 CMRC2491D 516466 6709966 337 -60/300 31 33 2.00 1.48 63 64 1.00 1.84 94 96 2.00 2.42 140 142 2.00 1.98 147 153 5.50 1.78 162 165 3.27 1.62 205 206 1.00 1.89 224 228 3.54 2.84 236 239 3.50 0.76 271 274 2.60 1.48 294 295 1.00 1.16 303 311 7.80 2.59 320 321 1.00 2.37 328 329 1.00 2.26 336 337 1.00 4.35 CMRC2494D 516466 6709800 338 -59/301 47 49 2.00 2.68 122 126 4.00 2.17 312 314 2.40 1.30 336 337 1.21 6.23 343 357 13.60 3.75 360 370 10.00 1.70 410 411 1.00 2.83 CMRC2495 516298 6705552 342 -60/269 45 46 1.00 1.42 114 115 1.00 1.22 119 120 1.00 1.12 CMRC2498 516174 6705602 343 -60/271 16 17 1.00 5.67 CMRC2499 516199 6705602 343 -60/270 46 47 1.00 3.26 CMRC2500 516199 6705625 343 -61/271 44 46 2.00 4.21 59 61 2.00 1.42 CMRC2502 516148 6705651 343 -60/267 83 84 1.00 1.19 CMRC2506 516124 6705701 344 -61/270 38 39 1.00 1.24 CMRC2509 516144 6705751 344 -61/270 50 53 3.00 4.01 CMRC2511 516194 6705749 344 -61/272 53 54 1.00 1.40 68 69 1.00 1.22
Page 80
80 Hole ID East North RL Dip/Azi From To Width Au g/t 72 73 1.00 1.53 93 95 2.00 1.45 CMRC2513 516148 6705725 344 -61/272 44 45 1.00 2.68 CMRC2514 516131 6705774 344 -61/271 37 38 1.00 4.62 CMRC2515 516148 6705774 344 -61/271 40 41 1.00 2.21 49 50 1.00 1.28 61 62 1.00 2.02 CMRC2516 516172 6705773 344 -60/272 45 47 2.00 12.40 CMRC2517 516196 6705773 344 -60/272 78 79 1.00 2.64 106 107 1.00 3.97 CMRC2520 516172 6705799 344 -61/270 94 95 1.00 20.50 CMRC2521 516193 6705793 344 -61/272 60 61 1.00 1.06 79 81 2.00 6.20 CMRC2524D 516512 6709714 342 -61/299 31 33 2.00 3.21 38 40 2.00 1.42 50 54 4.00 2.50 64 68 4.00 1.02 82 86 4.00 3.36 89 90 1.00 3.36 142 143 1.00 3.16 168 171 3.00 0.95 CMRC2525 516224 6705977 344 -61/269 135 137 2.00 2.31 CMRC2526 516273 6705977 344 -60/270 32 33 1.00 1.15 CMRC2533D 516491 6709768 340 -60/300 22 23 1.00 1.34 56 57 1.00 2.67 90 91 1.00 1.24 CMRC2534D 516213 6708800 339 -60/271 32 34 2.00 2.45 103 104 1.00 8.38 115 116 1.00 1.83 161 162 1.00 1.08 186 191 5.03 1.56 230 231 1.00 2.17 251 254 2.70 2.83 256 257 1.00 11.10 266 269 3.03 3.46 271 274 2.73 1.40 279 280 1.00 9.06 344 345 1.00 27.20 380 381 1.00 2.70 392 394 2.00 1.43 CMRC2534DW1 516213 6708800 339 -60/271 219 221 1.64 1.37 239 240 1.00 1.10 249 250 1.00 1.47 253 260 6.77 0.97 262 264 1.70 3.20
Page 81
81 Hole ID East North RL Dip/Azi From To Width Au g/t 274 275 1.00 1.13 CMRC2535D 516201 6708701 343 -61/269 1 2 1.00 1.43 30 36 6.00 4.43 66 75 9.00 3.89 93 94 1.00 1.20 CMRC2536D 516195 6708645 344 -58/270 28 29 1.00 19.85 70 78 8.00 2.45 137 138 1.00 1.18 CMRC2537D 516113 6708606 347 -60/271 27 33 6.00 2.59 74 75 1.00 10.70 86 87 1.00 1.48 161 162 1.00 16.00 CMRC2538D 516132 6708553 346 -61/271 43 45 2.00 2.90 CMRC2539D 516114 6708508 346 -60/271 43 44 1.00 6.64 65 66 1.00 14.10 CMRC3031D 516466 6708725 344 -60/271 45 46 1.00 2.10 50 51 1.00 1.00 66 67 1.00 2.20 79 82 3.00 1.08 87 89 2.00 2.35 108 109 1.00 1.02 189 190 1.41 4.67 214 215 1.00 3.64 CMRC3032D 516500 6708799 343 -64/272 58 59 1.00 1.05 92 94 2.00 2.37 98 99 1.00 1.31 105 108 3.00 2.01 146 149 3.00 9.00 299 301 2.06 1.32 329 330 1.50 4.64 364 365 1.00 2.49 383 384 1.00 1.10 400 402 2.00 1.73 533 535 1.80 2.28 537 539 1.92 4.34 543 546 3.00 2.23 569 570 1.12 1.02 576 579 3.00 1.65 585 587 2.00 4.11 646 649 2.90 1.56 658 667 9.12 1.95 706 707 1.00 2.50 CMRC3033D 516515 6708850 342 -61/272 30 31 1.00 1.03 73 76 3.00 0.87 97 106 9.00 1.49
Page 82
82 Hole ID East North RL Dip/Azi From To Width Au g/t 327 328 1.00 1.00 338 340 2.10 1.93 362 364 2.31 1.39 525 534 9.00 1.96 543 544 1.00 3.60 571 574 3.00 2.08 598 601 3.00 2.02 656 658 2.38 1.40 664 665 1.30 28.69 CMRC3033DW 516515 6708850 342 -61/272 334 338 3.29 0.98 350 353 3.24 1.04 360 362 1.38 3.32 419 420 1.00 2.72 427 428 1.00 1.23 533 534 1.00 2.78 546 549 3.10 0.90 573 574 1.00 1.25 626 635 8.50 5.13 653 654 1.17 2.23 CMRC3033DW2 516515 6708850 342 -61/272 358 360 1.92 7.45 370 371 1.00 8.16 416 417 1.00 1.33 577 586 9.10 5.05 596 597 1.18 1.10 612 615 3.40 2.51 641 645 3.25 12.74 CMRC3053 516256 6706484 344 -61/272 47 48 1.00 14.40 112 115 3.00 2.93 CMRC3054 516158 6706486 344 -60/269 174 177 3.00 2.91 CMRC3055 516131 6706236 344 -60/271 46 47 1.00 2.04 102 103 1.00 3.45 CMRC3058 516327 6706233 343 -60/269 138 141 3.00 11.72 144 145 1.00 3.25 CMRC3059 516305 6706285 343 -62/269 89 90 1.00 1.21 124 132 8.00 3.77 139 141 2.00 2.15
Page 83
83 Lexington Underground Significant intercepts table of Lexington UG assay drill intersections using a 1.0 g/t Au cut-off, with a minimum width of 1.0 meter and a maximum of 5.5 meters of consecutive internal waste. Hole ID East North RL Dip/Azi From To Width Au g/t CMAC1358 516296 6720906 344 -90/0 25 26 1.00 1.29 CMAC1433 514754 6718958 344 -90/0 3 4 1.00 1.11 CMAC1627 515088 6719238 330 -60/90 63 64 1.00 1.13 CMAC1628 515007 6719157 330 -60/90 28 29 1.00 1.10 CMAC1635 515023 6719143 329 -60/90 44 48 4.00 2.16 CMAC1637 514912 6719158 331 -60/90 82 88 6.00 0.47 101 102 1.00 1.76 CMAC1640 515035 6719238 330 -60/90 94 99 5.00 1.02 CMAC1641 514978 6719245 330 -60/90 89 91 2.00 1.44 CMAC1644 515158 6719347 335 -60/90 93 94 1.00 1.56 CMAC1647 514864 6718942 332 -60/90 39 41 2.00 0.70 51 53 2.00 0.77 CMAC1648 514806 6718950 333 -60/90 50 51 1.00 2.16 63 68 5.00 1.40 CMAC1649 514769 6718952 335 -60/90 91 92 1.00 1.10 CMAC2061 514841 6718970 338 -60/90 44 48 4.00 1.78 CMAC2062 514818 6718972 338 -60/90 52 56 4.00 1.71 CMAC2063 514794 6718971 339 -60/90 76 80 4.00 1.02 CMRC1682D 517667 6712050 320 -60/295 451 456 5.00 1.83 466 467 1.00 2.45 483 491 7.76 1.42 CMRC1683D 517474 6712290 318 -60/118 17 18 1.00 1.59 267 268 1.00 2.63 CMRC1685D 517273 6712196 327 -60/118 336 337 1.16 1.40 439 441 2.00 8.95 463 464 1.00 3.69 CMRC1995 541899 6784237 317 -61/345 133 134 1.00 2.93 197 198 1.00 1.90 CMRC1996 541905 6784217 316 -60/343 165 167 2.00 2.38 174 175 1.00 1.76 212 213 1.00 1.78 CMRC1997 541912 6784195 315 -60/346 217 220 3.00 9.68 226 227 1.00 1.72 257 258 1.00 1.86 CMRC1998 541938 6784243 317 -62/345 178 180 2.00 2.89 CMRC1999 541945 6784220 316 -61/345 213 214 1.00 4.61 270 271 1.00 1.61 CMRC2181D 516976 6710468 327 -56/299 336 338 1.80 2.89 382 432 49.50 1.12 450 467 16.90 1.60 487 500 12.88 1.44 535 537 2.00 0.94
Page 84
84 Hole ID East North RL Dip/Azi From To Width Au g/t 555 556 1.00 5.40 604 610 6.00 0.81 619 626 7.00 1.61 633 638 5.09 0.63 644 647 3.42 0.99 655 658 2.31 2.54 CMRC2182D 516993 6710535 326 -56/299 354 366 11.55 2.61 374 382 8.00 1.24 407 408 1.00 3.28 430 431 1.00 1.10 521 533 12.50 1.34 548 551 3.17 0.43 562 563 1.00 7.51 626 627 1.00 1.16 643 647 3.72 1.77 655 656 1.00 1.54 CMRC2187D 516958 6710508 328 -57/299 274 275 1.20 1.32 288 289 1.00 2.84 322 325 3.95 1.21 350 385 35.20 2.31 396 401 4.85 2.57 418 419 1.00 1.36 446 447 1.00 1.68 457 462 5.00 0.52 534 535 1.15 1.38 541 544 3.00 1.03 552 561 9.00 1.52 603 604 1.00 1.20 661 662 1.53 4.08 671 675 3.73 1.17 CMRC2302D 517143 6710740 324 -60/300 76 77 1.00 2.26 190 194 4.00 41.09 205 206 1.00 1.80 461 463 2.20 0.89 519 527 8.42 2.13 540 543 3.12 1.29 606 610 3.52 2.49 698 699 1.00 1.06 715 728 13.10 13.93 734 740 6.00 1.11 CMRC2401D 516854 6710477 348 -61/298 116 132 16.00 1.80 139 162 22.80 1.04 329 340 11.00 3.02 346 351 4.68 2.13 378 379 1.00 45.40
Page 85
85 Hole ID East North RL Dip/Azi From To Width Au g/t 386 397 10.50 1.79 423 425 1.59 1.69 CMRC2402D 516876 6710513 343 -61/299 21 23 2.00 1.53 80 81 1.00 1.05 103 105 2.00 1.59 115 116 1.00 1.50 147 148 1.00 3.16 160 163 2.70 3.67 174 197 23.50 1.98 205 207 1.99 1.20 249 267 17.10 1.30 293 294 1.00 2.41 417 419 2.00 1.50 429 430 1.30 8.96 CMRC2403D 516898 6710559 342 -60/300 95 96 1.00 6.16 112 113 1.00 2.92 177 187 9.90 0.68 224 229 4.67 0.72 236 242 6.25 0.64 366 371 4.51 1.28 391 392 1.00 2.23 398 412 14.00 1.08 CMRC2406D 517042 6710992 326 -60/296 181 186 4.28 1.26 233 241 8.07 1.64 260 265 5.68 0.73 278 282 4.00 0.57 363 379 15.66 0.63 CMRC2407D 517095 6710966 323 -60/288 327 328 1.00 1.09 340 346 5.60 2.17 408 409 1.00 1.80 421 422 1.00 5.67 448 469 21.00 0.70 513 514 1.20 1.14 CMRC2409D 516970 6710979 327 -60/297 39 43 4.00 1.90 65 66 1.00 2.53 89 107 18.00 1.10 122 129 7.00 0.70 140 141 1.00 4.18 150 151 1.10 1.04 252 253 1.30 6.86 274 278 3.60 0.85 301 302 1.00 1.78 CMRC2410D 517004 6710900 326 -52/291 157 159 1.56 2.65 172 173 1.00 2.64 205 221 15.96 1.25
Page 86
86 Hole ID East North RL Dip/Azi From To Width Au g/t 235 242 7.00 9.06 251 252 1.27 1.14 260 267 7.11 1.77 280 281 1.00 4.64 292 293 1.00 1.31 330 333 3.00 0.78 339 340 1.00 1.53 348 349 1.00 2.08 367 394 27.00 2.09 427 429 2.00 3.36 451 452 1.00 2.27 CMRC2411D 516997 6710843 326 -61/301 109 110 1.00 1.00 132 133 1.00 1.97 164 168 4.00 0.92 212 219 6.76 0.77 235 236 1.00 1.52 251 252 1.24 1.23 260 264 4.00 1.24 287 288 1.00 3.02 313 314 1.00 1.04 337 343 6.00 1.60 382 395 12.94 5.49 408 410 2.02 1.05 417 420 2.80 6.56 438 439 1.00 2.78 CMRC2413D 516939 6710823 329 -61/307 1 3 2.00 1.42 72 73 1.00 1.37 119 134 15.00 0.71 159 161 2.00 1.84 176 182 6.00 0.59 239 240 1.00 6.10 276 277 1.00 1.17 295 298 3.50 5.12 341 348 7.00 0.34 363 364 1.00 1.11 370 372 1.67 5.77 CMRC2414D 516951 6710937 328 -60/299 59 60 1.00 8.58 71 74 3.00 1.43 88 89 1.00 2.64 96 101 5.00 1.04 111 112 1.00 1.72 151 154 3.00 1.32 178 179 1.00 2.06 233 235 2.00 1.10 251 252 1.00 1.30
Page 87
87 Hole ID East North RL Dip/Azi From To Width Au g/t 259 261 2.00 3.06 CMRC2416D 517023 6710658 325 -60/306 305 308 3.40 0.59 343 344 1.00 1.85 353 377 24.00 1.17 383 388 5.06 1.79 406 409 3.00 1.16 438 446 8.00 0.69 474 476 1.50 1.60 547 548 1.00 2.15 556 558 2.00 1.57 568 586 18.12 1.51 CMRC2417D 516929 6710713 341 -60/300 73 74 1.00 1.20 131 132 1.00 1.66 149 150 1.00 4.43 156 158 2.00 2.90 170 174 4.00 1.98 190 195 4.61 0.97 203 209 6.00 1.27 223 224 1.00 2.16 280 281 1.00 2.57 331 335 3.97 1.07 353 360 7.00 1.42 367 373 6.00 1.12 CMRC2418D 517193 6711200 322 -56/301 374 376 2.00 3.31 385 391 5.86 1.06 412 413 1.00 1.22 426 432 5.53 0.80 455 465 10.00 2.80 567 568 1.03 1.67 608 609 1.00 2.62 648 650 2.42 2.43 CMRC2419D 517078 6710626 324 -65/305 528 533 5.60 1.12 553 558 5.74 1.05 568 578 10.00 1.73 662 665 3.36 0.80 676 678 1.64 1.61 724 748 23.91 3.32 760 762 2.00 2.31 780 783 2.33 2.32 801 804 2.90 1.34 814 828 14.00 0.98 838 858 19.90 0.69 CMRC2420D 517072 6711090 324 -60/302 252 255 2.87 10.79 281 289 8.19 0.55 349 350 1.00 1.58
Page 88
88 Hole ID East North RL Dip/Azi From To Width Au g/t CMRC2421D 517120 6711061 323 -61/301 98 101 3.00 2.72 322 325 2.50 1.69 349 357 8.07 0.94 383 384 1.00 11.40 414 418 4.00 0.60 436 437 1.00 1.66 447 448 1.00 1.41 CMRC2422D 517170 6711032 322 -60/299 420 421 1.00 5.64 440 445 5.46 1.26 451 457 5.52 1.07 468 469 1.37 15.07 488 496 8.00 1.21 518 524 6.00 1.09 559 560 1.00 3.42 615 625 10.30 1.41 CMRC2425D 517121 6711002 322 -61/301 0 1 1.00 1.26 76 78 2.00 2.42 376 384 8.00 2.25 398 400 1.90 2.48 406 412 5.60 2.43 517 527 9.09 1.73 536 539 3.00 1.66 CMRC2426D 517075 6711031 324 -61/300 275 279 4.00 5.53 296 298 2.36 2.57 327 329 2.00 1.97 336 340 4.04 2.05 356 374 18.00 1.22 417 428 11.00 2.58 438 444 5.75 7.32 457 463 6.00 1.48 CMRC2427D 517147 6711102 322 -60/303 68 69 1.00 1.04 342 343 1.60 11.23 363 372 9.04 3.54 378 380 2.88 1.78 431 432 1.00 5.46 CMRC2428D 517151 6710886 324 -61/0 357 358 1.00 1.59 422 423 1.00 1.84 439 466 27.56 3.24 482 489 7.47 2.28 501 502 1.00 1.04 520 521 1.04 1.92 538 540 2.00 1.85 576 593 17.45 2.65 606 609 3.50 14.50 625 636 11.42 0.80
Page 89
89 Hole ID East North RL Dip/Azi From To Width Au g/t 650 657 6.50 1.06 CMRC2429D 516927 6710482 332 -60/0 244 254 10.15 1.68 268 292 24.00 2.54 298 299 1.00 1.07 323 329 6.00 2.90 352 367 15.35 1.38 380 381 1.00 3.67 411 412 1.00 1.08 493 499 6.00 1.19 527 529 2.12 2.04 561 562 1.00 2.66 571 577 6.47 2.15 598 608 10.00 1.36 615 616 1.00 1.39 627 638 11.00 1.32 669 671 2.00 2.18 CMRC2430D 517247 6711167 321 -61/300 405 406 1.00 7.02 446 451 4.47 1.14 480 481 1.12 10.10 512 517 4.85 2.85 532 539 7.43 1.34 568 569 1.05 1.30 585 588 3.11 2.52 698 706 7.23 0.77 CMRC2434D 516893 6710674 350 -61/300 105 106 1.00 1.68 113 123 10.00 1.58 136 137 1.00 2.09 161 162 1.00 1.87 179 180 1.00 1.73 294 303 9.26 0.95 311 333 22.00 1.10 354 363 9.27 1.13 CMRC2435D 516852 6710581 353 -61/301 14 15 1.00 3.05 71 72 1.00 1.11 98 111 13.00 0.99 123 142 19.00 1.20 155 156 1.00 1.42 187 188 1.00 2.26 220 221 1.00 1.08 276 277 1.00 1.69 302 304 2.00 6.53 320 321 1.17 2.27 328 330 1.47 1.69 339 343 3.40 2.34 350 357 7.20 0.80
Page 90
90 Hole ID East North RL Dip/Azi From To Width Au g/t CMRC2436D 516957 6710639 334 -61/300 181 188 7.00 0.46 273 275 2.00 3.10 296 297 1.00 2.92 304 305 1.00 1.10 377 378 1.00 1.53 411 413 2.00 5.23 455 464 9.00 1.68 470 471 1.00 1.56 479 491 12.00 0.50 CMRC2441D 517003 6710930 327 -62/302 149 150 1.00 1.28 170 181 11.00 1.55 198 206 8.00 1.09 214 215 1.50 1.00 265 266 1.00 1.40 286 291 5.11 2.00 334 348 14.27 0.67 CMRC2442D 517049 6710925 326 -61/301 273 274 1.00 1.50 285 290 5.00 0.61 297 298 1.00 5.78 305 307 2.00 2.54 317 324 7.00 1.20 330 331 1.00 2.87 366 368 2.00 1.27 CMRC2443D 517023 6711055 326 -61/300 157 163 6.00 0.74 169 176 7.00 2.69 188 189 1.02 1.11 276 277 1.00 1.20 328 333 4.17 4.55 341 342 1.00 2.93 381 387 6.42 0.43 CMRC2444D 517119 6711177 323 -61/300 282 288 5.70 0.75 324 325 1.00 3.06 342 343 1.00 1.26 408 409 1.00 1.21 CMRC2445D 517163 6711264 322 -61/300 138 139 1.00 3.74 346 350 4.20 2.48 391 392 1.00 1.71 CMRC2446D 516980 6710778 338 -60/299 14 15 1.00 1.50 159 160 1.20 1.16 188 190 1.79 12.53 202 217 15.36 0.81 230 239 9.00 0.62 275 276 1.00 1.22 301 305 4.00 2.09 371 380 9.00 0.97
Page 91
91 Hole ID East North RL Dip/Azi From To Width Au g/t 397 399 2.34 4.07 CMRC2464D 517075 6710972 323 61/299 276 277 1.00 5.44 328 329 1.00 1.18 352 354 2.00 5.41 373 374 1.50 15.22 386 387 1.00 10.70 403 409 6.00 0.77 417 422 5.00 0.73 436 439 3.00 3.55 446 447 1.00 1.31 497 502 5.23 0.65 513 514 1.00 4.81 536 537 1.00 1.02 586 587 1.00 2.23 CMRC2467D 516932 6710817 330 -61/298 1 2 1.00 1.03 40 41 1.00 1.24 105 106 1.00 1.17 140 145 4.93 0.41 152 153 1.00 3.01 165 172 7.70 0.86 214 231 17.00 3.03 342 352 9.62 0.68 379 380 1.00 1.78 CMRC2468D 516780 6710514 342 -61/300 50 55 5.00 0.70 90 92 2.00 1.30 CMRC2484D 517054 6710382 327 -60/301 504 511 7.45 2.35 522 534 12.00 1.34 556 557 1.00 1.19 596 597 1.18 2.79 644 645 1.08 2.08 696 698 2.00 1.11 738 744 5.81 0.50 762 763 1.07 2.21 778 781 3.23 3.61 814 815 1.00 4.54 822 823 1.00 1.25 839 840 1.00 1.10 855 860 4.74 7.70 870 874 3.53 1.17 886 889 3.00 1.43 910 912 2.00 2.20 CMRC2485D 517104 6710471 325 -61/300 553 554 1.00 1.59 576 618 41.79 1.04 627 631 3.82 0.77 638 639 1.10 1.84
Page 92
92 Hole ID East North RL Dip/Azi From To Width Au g/t 696 701 4.39 0.45 779 785 5.99 1.15 798 803 4.69 1.07 877 888 11.00 1.82 915 916 1.00 1.95 943 944 1.00 2.66 958 959 1.00 1.47 CMRC2487D 517205 6710642 323 -61/301 61 62 1.00 1.18 656 657 1.18 5.54 664 667 3.00 3.12 809 823 13.89 0.94 834 835 1.00 1.48 881 889 7.54 1.59 895 902 6.50 1.23 CMRC2488D 517254 6710728 323 -61/302 148 149 1.00 2.52 493 494 1.00 3.44 633 634 1.09 1.99 648 655 7.00 0.87 709 719 10.01 1.13 725 728 2.80 3.57 734 740 5.95 2.55 755 756 1.00 3.11 901 910 8.54 3.02 922 931 9.08 1.58 CMRC2492D 516962 6710328 328 -60/299 311 318 6.77 0.55 362 370 8.18 5.33 384 385 1.00 2.52 391 397 5.62 8.40 416 417 1.54 12.86 434 435 1.00 1.19 445 446 1.00 1.13 504 508 4.00 0.94 521 522 1.00 1.57 533 534 1.00 4.51 547 548 1.55 4.54 567 568 1.00 1.71 610 614 4.00 1.07 631 632 1.00 9.92 663 664 1.00 1.02 681 693 11.80 5.64 744 750 6.09 0.66 CMRC2493D 516979 6710439 327 -60/300 52 53 1.00 2.20 328 330 2.00 2.51 354 357 3.50 1.27 363 367 3.10 3.42
Page 93
93 Hole ID East North RL Dip/Azi From To Width Au g/t 383 390 7.00 1.08 396 405 9.47 0.55 449 460 10.90 0.54 589 590 1.00 3.53 599 604 5.00 1.55 618 628 10.10 0.79 679 689 10.00 1.12 730 731 1.05 2.15 CMRC3023 541949 6784198 316 -61/344 257 264 7.00 1.19 CMRC3024 541989 6784202 316 -60/342 242 246 4.00 3.12 253 254 1.00 1.43 CMRC3025 542019 6784248 317 -60/347 183 184 1.00 1.31 207 208 1.00 1.43 CMRC3026 542030 6784207 316 -60/344 219 230 11.00 1.17 239 246 7.00 0.61 CMRC3029D 517001 6711014 327 -61/299 69 72 3.00 1.16 86 91 5.00 1.97 102 103 1.00 2.38 137 142 4.71 2.77 167 170 2.71 4.36 192 206 13.57 2.30 311 336 25.50 0.93 349 350 1.00 1.03 CMRC3030D 516959 6710664 338 -62/300 196 197 1.00 1.63 211 212 1.00 3.40 223 224 1.00 1.10 252 254 1.65 8.69 267 272 5.00 0.54 288 289 1.00 1.17 296 300 4.00 1.77 338 339 1.00 1.10 452 453 1.00 1.05 464 484 20.20 4.00 CMRC3034 542133 6784226 315 -61/345 223 224 1.00 14.70 239 258 19.00 4.38 CMRC3035 542143 6784204 315 -60/345 233 234 1.00 1.07 256 274 18.00 4.48 CMRC3036 542211 6784249 315 -62/345 202 205 3.00 0.97 218 219 1.00 1.96 227 228 1.00 1.10 236 238 2.00 3.90 254 255 1.00 1.38 CMRC3037 542217 6784230 314 -61/344 263 264 1.00 1.90 319 323 4.00 1.50 CMRC3038 542174 6784236 316 -61/346 199 201 2.00 2.02
Page 94
94 Hole ID East North RL Dip/Azi From To Width Au g/t 223 226 3.00 1.41 242 251 9.00 1.08 270 271 1.00 4.31 279 286 7.00 1.17 CMRC3039 542177 6784219 314 -61/345 48 49 1.00 1.82 272 273 1.00 2.44 CMRC3041 542284 6784276 314 -61/345 210 214 4.00 0.99 CMRC3042 542292 6784254 312 -60/345 230 235 5.00 0.85 271 274 3.00 1.39 280 281 1.00 1.28 300 301 1.00 2.29 CMRC3045 542089 6784235 316 -60/345 200 203 3.00 1.61 CMRC3047 542482 6784411 310 -61/345 74 75 1.00 2.91 CMRC3049 542554 6784449 310 -62/345 69 70 1.00 1.04 CMRC3050 542560 6784429 309 -60/343 112 119 7.00 0.62 129 131 2.00 2.19 171 172 1.00 1.29 CMRC3051 542602 6784459 310 -61/346 110 112 2.00 1.72 CMRC3077 542439 6785019 324 -59/325 116 120 4.00 3.50 Karlawinda Reported intercepts for Open Pit mining methods and include a minimum of 0.5g/t Au value over a minimum length of 1m with a maximum 2m length of consecutive internal waste. No upper cuts have been applied.
Page 95
95 Hole ID East North RL Dip/Azi From To Width Au g/t KBRC2676 210660 7366874 582 -61/260 186 188 2 1 KBRC2678 210711 7366888 582 -60/259 149 150 1 2 KBRC2680 210607 7366921 583 -60/260 181 182 1 9 KBRC2682 210702 7366938 583 -60/260 109 110 1 1 145 146 1 1 150 152 2 2 221 227 6 3 KBRC2684 210625 7366816 582 -60/260 201 202 1 1 168 169 1 1 201 202 1 1 KBRC2686 210531 7367050 583 -61/261 219 220 1 1 200 201 1 1 KBRC2692 210606 7367068 584 -60/262 172 173 1 3 210 213 3 1 134 138 4 0 164 165 1 2 KBRC2693 210674 7367078 584 -60/260 65 66 1 1 111 113 2 2 141 144 3 0 309 311 2 1 KBRC2694 210548 7366957 583 -60/260 180 184 4 1 KBRC2696 210645 7366975 583 -60/259 208 216 8 1 112 116 4 1 KBRC2700 210514 7366850 583 -60/258 192 196 4 1 204 208 4 1 KBRC2701 210561 7366857 583 -60/260 264 265 1 1 231 232 1 1 KBRC2703 211172 7366688 583 -60/261 104 108 4 2 KBRC2704 211303 7366713 582 -61/259 264 268 4 1 156 160 4 1 KBRC2708 211234 7366751 583 -60/260 148 152 4 1 108 112 4 4 KBRC2710 211130 7366783 583 -60/260 128 132 4 7 KBRC2711 211179 7366790 584 -61/261 132 136 4 2 252 256 4 1 KBRC2712 210669 7366916 582 -58/233 260 264 4 3 KBRC2713 211230 7366797 583 -61/259 128 132 4 1 160 164 4 1 128 132 4 1 160 164 4 1 128 132 4 1 KBRC2718 211234 7366656 582 -60/261 84 88 4 1 112 116 4 1 KBRC2722 211302 7366666 582 -60/259 168 176 8 1 KBRC2729 207899 7369590 595 -60/202 16 20 4 1
Page 96
96 Hole ID East North RL Dip/Azi From To Width Au g/t KBRC2730 207939 7369695 595 -61/199 156 160 4 3 Ricciardo Significant intercepts table of Ricciardo assay drill intersections using a 0.5 g/t AuEq cut-off, with a minimum width of 0.2 meters and a maximum of 2 meters of consecutive internal waste. Hole ID East North RL Dip/Azi From To Width Au g/t Sb % AuEq g/t RDRC078 495043 6803151 356.94 -66/89 230 245 15 1.07 0.19 1.47 RDRC078 249 253.7 4.7 1.55 0.01 1.57 RDRC078 257 260.2 3.2 2.03 0 2.03 RDRC078 284 285 1 2.76 0 2.76 RDRC079 494949 6802970 356.82 -63/86 317 319 2 0.56 0.03 0.63 RDRC079 321 322 1 0.43 0.04 0.51 RDRC079 324 327 3 0.33 0.11 0.56 RDRC079 329 330 1 0.6 0.01 0.63 RDRC079 341 343 2 0.08 0.29 0.69 RDRC079 355 356 1 0.72 0.01 0.75 RDRC079 383 386 3 0.69 0 0.7 RDRC079 393 394 1 0.4 0.06 0.53 RDRC079 397 400 3 0.56 0.01 0.59 RDRC080 494898 6802967 356.5 -69/87 239 244 5 0.2 0.41 1.07 RDRC080 247 249 2 0.23 0.31 0.88 RDRC080 252 269 17 0.1 0.28 0.7 RDRC080 271.1 273.3 2.15 2.18 0.01 2.2 RDRC080 343 350 7 0.4 0.11 0.63 RDRC080 357 374 17 0.22 0.27 0.79 RDRC080 377 449 72 0.55 0.3 1.18 RDRC080 461 463.6 2.6 0.53 0.21 0.97 RDRC080 468 469 1 0.48 0.02 0.52 RDRC080 483 484 1 0.79 0.01 0.81 RDRC080 494 498.2 4.2 0.95 0.03 1.03 RDRC080 506 507.8 1.8 1.6 0 1.61 RDRC081 494999 6802926 357.09 -60/88 142 143 1 0.17 0.35 0.9 RDRC081 146.6 147 0.4 0.31 0.12 0.57 RDRC081 153 176 23 0.42 0.25 0.96 RDRC081 189 193.6 4.6 0.76 0.18 1.13 RDRC081 197 199 2 0.87 0.04 0.94 RDRC081 207 211 4 1.3 0.02 1.33 RDRC082 494974 6802924 356.94 -61/88 162.9 164 1.1 1.19 0.01 1.22 RDRC082 179 201 22 0.5 0.56 1.7 RDRC082 205 206 1 0.23 0.47 1.22 RDRC082 209 215 6 1.61 1.43 4.65 RDRC082 227 239 12 2.3 0.68 3.74 RDRC082 247 248 1 0.6 0.01 0.63 RDRC083 494951 6802925 356.88 -61/88 306.1 313 6.89 0.47 0.51 1.56 RDRC083 317 317.5 0.45 0.63 0.01 0.65 RDRC083 320.8 328 7.25 0.5 0.21 0.95
Page 97
97 Hole ID East North RL Dip/Azi From To Width Au g/t Sb % AuEq g/t RDRC083 331 332 1 0.25 0.17 0.61 RDRC083 335 336 1 0.17 0.21 0.61 RDRC083 341 343 2 0.49 0.03 0.56 RDRC085 245.2 246.2 1 0.54 0.01 0.55 RDRC085 494875 6802925 356.6 -61/90 265 273.2 8.2 0.5 1.47 3.6 RDRC085 282.8 288 5.16 3.79 0.11 4.02 RDRC085 291.1 291.6 0.42 0.67 0.05 0.78 RDRC085 294 303.6 9.57 0.92 0.01 0.95 RDRC085 311 324 13 1.47 0.09 1.66 RDRC085 333 335.2 2.16 1.09 0.05 1.19 RDRC085 341.9 347.3 5.44 4.78 0.01 4.79 RDRC085 365 417 52 1.06 0.06 1.2 RDRC085 431 433 2 0.55 0.01 0.57 RDRC085 436 436.7 0.68 0.57 0.01 0.59 RDRC087 494824 6802926 356.58 -61/89 299 319 20 0.16 0.43 1.07 RDRC087 322 327 5 1.51 0.23 2 RDRC087 330 336 6 0.81 0.06 0.94 RDRC087 386 388.6 2.6 1.33 0.01 1.35 RDRC087 399 400 1 0.39 0.1 0.61 RDRC087 421 429 8 0.47 0.08 0.63 RDRC087 437 442.2 5.2 1.77 0.01 1.79 RDRC087 448 449 1 1.1 0.02 1.14 RDRC087 455 458 3 0.86 0.12 1.1 RDRC087 463 467 4 1.21 0.09 1.4 RDRC088 494996 6802821 357.6 -61/89 149.4 152 2.6 0.13 0.36 0.9 RDRC088 157 162 5 0.19 0.28 0.8 RDRC088 177 178 1 0.16 0.41 1.03 RDRC088 182 184.8 2.75 0.76 0.03 0.81 RDRC089 494970 6802823 357.52 -61/88 172.8 178 5.2 0.27 0.39 1.1 RDRC089 182 183 1 0.11 0.42 1.01 RDRC089 197 198 1 0.04 0.66 1.44 RDRC089 201 202 1 0.76 0.01 0.78 RDRC089 209 211 2 0.92 0.05 1.03 RDRC090 494943 6802822 357.43 -61/88 198.6 205 6.4 0.16 0.2 0.59 RDRC090 209 213 4 0.12 0.33 0.82 RDRC090 219 220 1 0.08 0.45 1.03 RDRC090 226 231 5 0.36 0.11 0.59 RDRC090 237 244 7 0.83 0.08 1 RDRC092 494864 6802822 357.17 -61/90 274 282 8 0.24 0.52 1.34 RDRC092 290 294 4 0.11 0.42 0.99 RDRC092 300 312.3 12.3 0.36 0.51 1.43 RDRC092 317 343 26 0.55 0.11 0.77 RDRC093 494816 6802822 356.85 -61/88 310 312 2 0.28 0.78 1.93 RDRC093 319 323 4 0.5 0.7 1.97 RDRC093 330 355 25 0.27 0.66 1.68 RDRC093 365.7 370 4.3 1.39 0.02 1.43 RDRC093 376 377 1 1.01 0.02 1.06 RDRC093 384 388 4 0.25 0.24 0.77
Page 98
98 Hole ID East North RL Dip/Azi From To Width Au g/t Sb % AuEq g/t RDRC094 494967 6802721 357.78 -60/89 170 175.5 5.5 0.07 0.36 0.84 RDRC094 184 185 1 0.72 0.02 0.76 RDRC094 206 206.3 0.3 0.43 0.05 0.55 RDRC094 208.5 209 0.5 0.63 0.01 0.65 RDRC095 494847 6802723 357.37 -71/92 259 261 2 1.06 0 1.06 RDRC095 321 322.7 1.7 0.1 0.93 2.06 RDRC095 326 333 7.05 0.24 0.46 1.21 RDRC095 344 354 10 0.4 0.21 0.84 RDRC095 366 371.7 5.7 0.53 0.01 0.55 RDRC096 494992 6802770 357.67 -67/88 161 163 2 0.08 0.56 1.28 RDRC096 165.6 168 2.4 0.28 0.24 0.79 RDRC096 172 174 2 0.95 0.2 1.37 RDRC096 203 205 2 0.63 0.01 0.64 RDRC096 212 213.1 1.1 0.53 0.01 0.55 RDRC097 494974 6802770 357.82 -70/90 192.5 199 6.5 0.23 0.76 1.83 RDRC097 205 209 4 0.75 0.04 0.83 RDRC097 212 214 2 0.16 0.46 1.13 RDRC097 224 236 12 0.33 0.12 0.58 RDRC098 494956 6802769 357.67 -71/88 205 205.8 0.8 0.19 0.15 0.5 RDRC098 209.1 213 3.9 0.18 0.41 1.04 RDRC098 227 231 4 0.55 0.1 0.76 RDRC098 269 269.4 0.4 0.48 0.01 0.5 RDRC099 495062 6803200 357.09 -66/88 164.8 165.1 0.27 0.83 0 0.84 RDRC099 170 190 20 2.36 0.02 2.41 RDRC099 198 213 15 1.17 0.15 1.48 RDRC099 217 222 5 0.54 0.02 0.58 RDRC099 249.1 260.4 11.34 1.31 0.02 1.36 RDRC099 287.6 287.9 0.27 1.21 0.13 1.49 RDRC099 294 294.9 0.92 0.84 0.01 0.87 RDRC100 495066 6803200 357 -61/87 160 174 14 1.13 0.03 1.19 RDRC100 181 204 23 1.15 0.1 1.37 RDRC100 210 212 2 0.43 0.08 0.61 RDRC100 215 220 5 0.51 0.08 0.67 RDRC100 222.8 227.6 4.75 2.36 0.03 2.42 RDRC100 232.7 233.6 0.9 1.02 0 1.03 RDRC101 495051 6803076 357.07 -58/90 118.7 119.3 0.6 0.67 0.01 0.68 RDRC101 120.1 125.5 5.4 0.99 0 0.99 RDRC101 136 137 1 0.58 0.01 0.6 RDRC101 161.9 163 1.15 0.07 0.46 1.04 RDRC101 178 189 11 0.71 0.04 0.8 RDRC101 195.4 217 21.62 2.94 0.13 3.21 RDRC101 220 221 1 1.25 0.02 1.3 RDRC102 495030 6803075 356.97 -66/90 186.2 187 0.81 0.75 0 0.76 RDRC102 189.9 191 1.1 0.51 0.01 0.52 RDRC102 214 223 9 4.33 0.3 4.97 RDRC102 232 252 20 1.29 0.01 1.31 RDRC102 259 265 6 0.78 0 0.79 RDRC102 348 350 2 1.07 0 1.08
Page 99
99 Hole ID East North RL Dip/Azi From To Width Au g/t Sb % AuEq g/t RDRC102 364 365.9 1.92 0.64 0 0.65 RDRC102 374 374.3 0.33 0.61 0.03 0.67 RDRC102 378 379 1 2.47 0.02 2.51 RDRC103 495032 6803023 356.98 -69/88 120 123 3 0.93 0.52 2.04 RDRC103 126 131.6 5.6 1.1 0.4 1.95 RDRC103 167 172 5 0.63 0.42 1.53 RDRC103 215 246 31 2.29 0.06 2.41 RDRC103 317 318 1 0.5 0 0.51 RDRC103 324 326 2 0.51 0.01 0.53 RDRC103 332 342 10 1.13 0.01 1.14 RDRC103 345 346 1 0.5 0.01 0.53 RDRC103 350 351 1 0.49 0.01 0.51 RDRC103 355 357 2 0.92 0.02 0.97 RDRC103 370 371 1 0.55 0 0.56 RDRC103 391 392 1 0.56 0 0.57 RDRC104 495039 6803023 357.1 -63/84 103 116.1 13.1 0.83 1.51 4.04 RDRC104 139 141.7 2.7 1.31 0.06 1.43 RDRC104 161 162 1 2.47 0 2.48 RDRC104 169 170.7 1.7 0.59 0.01 0.61 RDRC104 178 179 1 0.75 0.03 0.81 RDRC104 181 182 1 0.77 0 0.77 RDRC104 186 187.9 1.9 2.7 0.04 2.78 RDRC104 195 211 16 1.44 0.67 2.86 RDRC104 217 219 2 1.59 0.01 1.6 RDRC104 222 233 11 0.71 0.32 1.39 RDRC104 236 245 9 1.2 0.02 1.25 RDRC104 248 250.1 2.1 0.27 0.27 0.85 RDRC104 274 279 5 0.81 0.01 0.83 RDRC104 285 287 2 0.52 0.02 0.57 RDRC104 293 295 2 0.82 0.01 0.83 RDRC104 302 309 7 0.77 0.02 0.81 RDRC105 495026 6802972 357.45 -61/85 123 164 41 0.62 0.63 1.95 RDRC105 169 184 15 1.41 0.19 1.82 RDRC105 187 191 4 0.57 0.18 0.95 RDRC105 196 209.5 13.5 2.02 0.06 2.14 RDRC105 221 222 1 1.16 0.01 1.18 RDRC106 495065 6802951 357.39 -61/89 84.7 100 15.27 0.39 0.28 0.99 RDRC106 104.8 116 11.24 1.55 0.27 2.12 RDRC106 119.7 120.6 0.9 0.05 0.41 0.91 RDRC106 139 139.4 0.4 0.85 0 0.86 RDRC106 143 145 2 0.86 0.01 0.87 RDRC107 495076 6802921 357.56 -61/87 63 64 1 0.81 0.29 1.44 RDRC107 75.5 88 12.5 0.35 0.16 0.69 RDRC107 97 98 1 0.13 0.31 0.78 RDRC107 101 102 1 0.19 0.44 1.12 RDRC107 106 110 4 0.07 0.5 1.13 RDRC107 114 117 3 0.39 0.34 1.11 RDRC107 124.3 126.4 2.1 1.21 0.01 1.24
Page 100
100 Hole ID East North RL Dip/Azi From To Width Au g/t Sb % AuEq g/t RDRC109 495051 6802920 357.42 -61/90 102 117 15 0.59 0.17 0.94 RDRC109 120 121 1 0.53 0 0.54 RDRC109 124 133 9 1.22 0.02 1.27 RDRC109 147.6 154 6.4 0.57 0.08 0.74 RDRC109 158 162 4 0.67 0.01 0.69 RDRC109 189 190 1 1.1 0 1.11 RDRC110 495067 6802848 358.04 -60/91 68 85 17 0.74 0.18 1.13 RDRC110 90 112 22 0.9 0.06 1.02 RDRC111 494966 6802871 357.36 -65/90 105.5 106.5 1 1 0 1 RDRC111 169.4 169.9 0.5 0.51 0.01 0.53 RDRC111 179.1 180 0.9 0.09 0.3 0.73 RDRC111 187 188.2 1.2 0.08 0.28 0.67 RDRC111 191 203 12.03 2 0.35 2.75 RDRC111 206 215 9 0.2 0.22 0.67 RDRC111 219 220 1 0.18 0.4 1.03 RDRC111 223 225 2 0.14 0.2 0.57 RDRC111 229 241.3 12.3 1.87 0.14 2.16 RDRC111 245.2 247 1.8 0.69 0.03 0.75 RDRC112 494891 6802873 356.94 -66/91 267 268 1 0.7 0.11 0.92 RDRC112 271 289.4 18.4 0.93 0.44 1.86 RDRC112 292 336 44 0.3 0.24 0.81 RDRC112 343 354 11 1.05 0.67 2.47 RDRC113 494776 6802873 357.07 -60/89 227 227.7 0.7 2.09 0 2.09 RDRC113 369 397 28 0.67 0.87 2.51 RDRC113 406 447 41 1.36 0.06 1.49 RDRC113 450 453 3 0.32 0.29 0.95 RDRC113 482 486 4 2.15 0.02 2.2 RDRC113 498.8 501 2.2 1.45 0.01 1.47 RDRC113 511 519 8 0.74 0.02 0.79 RDRC113 522 530 8 1.16 1.42 4.16 RDRC113 534 539 5 0.14 0.17 0.51 RDRC114 494947 6802669 357.83 -61/90 196.4 200.2 3.8 0.26 0.13 0.53 RDRC114 206 208.6 2.63 2.37 0.01 2.39 RDRC114 214 217 3 1.11 0.01 1.12 RDRC114 228 229 1 1.08 0.01 1.1 RDRC114 237 238 1 0.73 0 0.73 RDRC115 494949 6802568 358.2 -61/92 209 214.1 5.13 0.59 0.19 0.99 RDRC115 217 224 7 3.83 0.24 4.33 RDRC116 494995 6802515 358.62 -51/90 159.6 166.6 7 0.55 0.53 1.68 RDRC116 172 176 4 1.26 0.01 1.29 RDRC117 494968 6802520 358.41 -58/90 198 199 1 0.33 0.22 0.8 RDRC117 202.1 208 5.86 1.48 0.05 1.59 RDRC117 213 214.9 1.86 4.32 0 4.33 RDRC118 494870 6802521 358.24 -58/88 282.3 283.4 1.1 0.88 0.16 1.22 RDRC118 287 299 12 2.43 0.23 2.91 RDRC119 494990 6802471 358.77 -58/90 170.6 171.2 0.6 0.9 0.01 0.91 RDRC119 184 187.7 3.73 1.14 0.45 2.08 RDRC119 191 193 2 1.73 0.08 1.9
Page 101
101 Hole ID East North RL Dip/Azi From To Width Au g/t Sb % AuEq g/t RDRC119 196 199 3 3.05 0 3.06 RDRC120 494921 6802469 358.64 -58/91 233 234 1 0.54 0 0.55 RDRC120 238 247.3 9.3 3.74 0.06 3.87 RDRC120 250.9 254 3.1 1.15 0.11 1.38 RDRC120 261 263 2 2.17 0 2.17 RDRC121 494796 6802470 358.35 -58/88 310.2 311 0.82 1.08 0.01 1.09 RDRC121 358 372 13.95 2.75 0.96 4.78 RDRC121 377 378 1 1.14 0.02 1.19 RDRC122 494979 6802426 358.89 -61/91 203 204 1 0.4 0.47 1.41 RDRC122 210 212 2 0.63 0.06 0.76 RDRC123 494904 6802419 358.7 -68/89 282.9 283.9 1 2.53 0.01 2.54 RDRC123 286 298 12 2 0.79 3.68 RDRC123 310 311 1 1.37 0 1.37 RDRC124 494812 6802366 358.86 -66/91 386 392 6 1.61 1.72 5.25 RDRC124 395 408 13 1.28 0.21 1.73 RDRC125 494900 6802119 359.95 -58/88 324.5 328 3.5 1.13 0.6 2.4 RDRC126 494860 6802220 359.47 -58/90 323 324 1 0.86 0 0.86 RDRC126 327 327.9 0.9 0.5 0 0.5 RDRC126 334.4 340.1 5.62 1.4 0.44 2.33 RDRC127 495178 6801944 361.15 -58/88 136 144 8 0.4 0.13 0.67 RDRC128 495280 6801770 361.89 -55/90 71 73 2 0.4 0.07 0.55 RDRC128 78 79 1 0.81 0.05 0.92 RDRC128 84 87 3 1.17 0.04 1.26 RDRC129 495294 6801744 362 -56/90 76 80 4 0.64 0.06 0.77 RDRC129 87 90 3 0.67 0.02 0.71 RDRC130 495292 6801620 362.51 -50/89 116 120 4 0.66 0.24 1.18 RDRC130 125 132 7 0.86 0.11 1.1 RDRC131 495319 6801542 362.78 -51/89 121 122 1 0.62 0.06 0.76 RDRC131 126 130 4 0.7 0.12 0.96 RDRC132 495293 6801814 362 -61/89 48 49 1 0.5 0.04 0.59 RDRC133 495074 6802817 358.12 -58/89 67 79 12 0.44 0.14 0.74 RDRC133 86 89 3 0.64 0.05 0.74 RDRC133 92 94 2 0.56 0.02 0.6 RDRC134 495060 6802797 358.44 -56/90 91 103 12 0.88 0.14 1.17 RDRC134 106 114 8 0.48 0.18 0.86 RDRC135 494760 6802821 356.75 -65/89 272 273 1 0.57 0 0.57 RDRC136 494680 6802720 357.14 -64/89 406 407 1 0.6 0 0.6 RDRC136 448 456 8 0.23 0.49 1.27 RDRC136 459 462 3 0.43 0.65 1.81 RDRC136 465 465.8 0.8 0.68 0.06 0.8 RDRC136 480 491 11 0.3 0.18 0.68 RDRC137 494705 6802198 359.13 -67/87 500.8 501.5 0.75 0.65 0 0.65 RDRC137 508.5 509.6 1.14 0.9 0.01 0.91 RDRC137 512.7 513.2 0.54 1.56 0.28 2.14 RDRC137 522 546 24 5.24 0.34 5.96 RDRC138 495145 6803272 357.34 -50/89 24 40 16 0.99 0.13 1.26 RDRC138 44 54 10 1.09 0.05 1.19 RDRC138 57 58 1 0.7 0.03 0.76
Page 102
102 Hole ID East North RL Dip/Azi From To Width Au g/t Sb % AuEq g/t RDRC138 95 96 1 0.69 0.02 0.74 RDRC138 98 99 1 0.47 0.03 0.52 RDRC138 101 102 1 0.58 0.02 0.61 RDRC138 105 107 2 0.99 0.01 1.02 RDRC138 112 114 2 0.57 0.01 0.6 RDRC138 123 124 1 6.12 0 6.12 RDRC139 495143 6803297 357.24 -49/89 25 31 6 0.73 0.04 0.81 RDRC139 39 57 18 1.19 0.05 1.3 RDRC140 494930 6803149 356.39 -60/88 331 332 1 0.92 0.03 0.97 RDRC140 347 349 2 0.22 0.17 0.59 RDRC140 477.8 478.1 0.37 0.91 0 0.91 RDRC140 488 488.7 0.73 0.63 0 0.64 RDRC140 503 504 1 1.62 0.01 1.64 RDRC141 RDRC141 494948 6803025.43 356.55 -61/88 180 8 0.23 0.24 0.74 RDRC141 260 272 12 1.73 0.04 1.8 RDRC141 279 288 9 0.75 0.48 1.77 RDRC141 292 293 1 0.76 0.01 0.78 RDRC141 329 330 1 0.64 0 0.65 RDRC141 364 367 3 0.51 0.11 0.75 RDRC141 376 377 1 0.37 0.1 0.59 RDRC141 378 379 1 0.52 0 0.52 RDRC141 403 404 1 1.2 0 1.21 RDRC142 495045 6803232 356.93 -56/92 43 44 1 0.5 0 0.5 RDRC142 169.4 222 52.6 0.57 0.41 1.44 RDRC142 228 229 1 0.26 0.14 0.54 RDRC142 239.1 247 7.9 5.1 0.05 5.2 RDRC143 494699 6802045 359.4 -75/89 623.6 624 0.4 0.61 0 0.61 RDRC143 627 636 9 1.53 2.14 6.06 RDRC144 495024 6802872 357.44 -61/88 98 99 1 1.01 0.01 1.04 RDRC144 123 132 9 0.95 0.07 1.09 RDRC144 140 151 11 1.13 0.09 1.32 RDRC144 157 161 4 0.07 0.38 0.88 RDRC144 164 166 2 0.65 0.02 0.69
Page 103
103 Appendix 3 JORC Code, 2012 Edition – Table 1 Section 1 Sampling Techniques and Data (Criteria in this section apply to all succeeding sections.) Criteria JORC Code explanation Commentary Sampling techniques • Nature and quality of sampling (eg cut channels, random chips, or specific specialised industry standard measurement tools appropriate to the minerals under investigation, such as down hole gamma sondes, or handheld XRF instruments, etc). These examples should not be taken as limiting the broad meaning of sampling. • Include reference to measures taken to ensure sample representivity and the appropriate calibration of any measurement tools or systems used. • Aspects of the determination of mineralisation that are Material to the Public Report. • In cases where ‘industry standard’ work has been done this would be relatively simple (eg ‘reverse circulation drilling was used to obtain 1 m samples from which 3 kg was pulverised to produce a 30 g charge for fire assay’). In other cases more explanation may be required, such as where there is coarse gold that has inherent sampling problems. Unusual commodities or mineralisation types (eg submarine nodules) may warrant disclosure of detailed information. RC drilling at MGGP completed by Topdrill with the same techniques and process at both. For Reverse Circulation (RC) drilling 2kg - 3kg samples are split from dry 1m bulk samples. The sample was collected through a cyclone and cone splitter. DD samples were collected at 0.3-1m intervals with half sawn 2kg - 3kg core samples sent to for Au analysis. Grade control drilling used the same sampling, analytical and QAQC techniques stated above and below for RC drilling. The grade control drilling was completed with a AC rig by prospect drilling with a blade bit collecting 2kg - 3kg samples split from dry 1m bulk samples. The sample was collected through a cyclone and cone splitter. For regional first pass RC drilling 1m sample was collected in a bucket and then tipped in neat lines on the ground. The piles were then sampled by using a spear to collect a field composite (4m RC) 2.0kg to 3.0kg sample which was then placed in a calico bag. Field duplicates were not collected for the regional RC drilling. CRM were inserted at a ratio of 1:30 composites for regional RC. The grade ranges of the CRM’s were selected based on grade populations and economic grade ranges. +100-200ppb then have their corresponding 1m rig split samples sent for fire assay with the below 1m QAQC applied appropriate for use in JORC resource reporting. 1m RC Field duplicates were collected at a ratio of 1:40 and collected at the same time as the original sample through the B chute of the cone splitter. Matrix matched CRMS and OREAS certified reference material (CRM) were inserted at a ratio of 1:40. The grade ranges of the CRM’s were selected based on grade populations and economic grade ranges. Samples were sent to the laboratory where they were pulverised to produce a 50 g charge for fire assay. Ricciardo: For the Reverse Circulation (RC) drilling program, 1m RC drill samples were collected through a rig-mounted cone splitter designed to capture a one metre sample with optimum 2kg to 4kg sample weight. Once drilling reached fresh rock a fine spray of water was used to suppress dust and limit the loss of fines through the cyclone chimney. Compositing RC samples in lengths of 4 m was undertaken from host rocks via combining ‘Spear’ samples of the 1m intervals to generate a 2 kg (average) sample. Diamond Core samples were taken, generally on 1 m intervals or on geological boundaries where appropriate. For 1m RC samples, field duplicates were collected at an approximate ratio of 1:50 and collected at the same time as the original sample through the chute of the cone splitter. Certified reference materials (CRMs) were inserted at an approximate ratio of 1:15 and blanks were inserted at an approximate ratio of 1:25. Grade range of the certified samples were selected based on grade population and economic grade ranges. For composite RC samples, field duplicates were made via combining ‘Spear’ samples. Duplicates, CRMs and blanks were inserted at an approximate ratio of 1:50. Samples were sent to the lab where they were pulverised to produce a 30g or 25g sample for fire assay.
Page 104
104 Criteria JORC Code explanation Commentary Drilling techniques • Drill type (eg core, reverse circulation, open-hole hammer, rotary air blast, auger, Bangka, sonic, etc) and details (eg core diameter, triple or standard tube, depth of diamond tails, face-sampling bit or other type, whether core is oriented and if so, by what method, etc). RC: Topdrill Drilling drill rig was used to drill the RC drill holes: Hole diameter was 140mm. DD: Topdrill RC and DD drill rig was used with RC pre-collars averaging 190m depth, then NQ2 coring to EOH. All core oriented by reflex instrument. Ricciardo: Challenge Drilling drill rig was used for the RC holes and RC pre-collar. Hole diameter was 140 mm. Diamond drilling was also undertaken by Terra Drilling rig using HQ. Core was orientated using Axis Champ Ori digital core orientation tool. Drill sample recovery • Method of recording and assessing core and chip sample recoveries and results assessed. • Measures taken to maximise sample recovery and ensure representative nature of the samples. • Whether a relationship exists between sample recovery and grade and whether sample bias may have occurred due to preferential loss/gain of fine/coarse material. RC: Once drilling reached fresh rock a fine spray of water was used to suppress dust and limit the loss of fines thorough the cyclone chimney. At the end of each metre the bit was lifted off the bottom to separate each metre drilled. The majority of samples were of good quality with ground water having minimal effect on sample quality or recovery. There is no obvious relationship between sample recovery and grade. DD: Diamond Core recoveries are very high due to the competent ground. Any core recovery issues are noted on core blocks and logged. There is no known relationship between sample recovery and grade. Ricciardo: For RC each metre interval, sample recovery, moisture and condition were recorded systematically. Most samples were of good quality with ground water having minimal effect on sample quality or recovery. The diamond drill core recovered is physically measured by tape measure and the length recovered is recorded for every run. There is no obvious relationship between sample recovery and grade. During the RC sample collection process, the sample sizes were visually inspected to assess drill recoveries. Logging • Whether core and chip samples have been geologically and geotechnically logged to a level of detail to support appropriate Mineral Resource estimation, mining studies and metallurgical studies. • Whether logging is qualitative or quantitative in nature. Core (or costean, channel, etc) photography. • The total length and percentage of the relevant intersections logged. Reverse circulation chips were washed and stored in chip trays in 1m intervals for the entire length of each hole. Chip trays were stored on site in a sealed container. Chips were visually inspected and logged by an on-site geologist to record lithology (including rock type, oxidation state, weathering, grain size, colour, mineralogy, and texture), alteration, mineralisation, veining, structure, sample quality (dry/wet, contamination) and approximate water flow down hole. Mineralisation, veining and water flow were quantitative or semi- quantitative in nature; the remainder of logging was qualitative. DD: Qualitative: Lithology, colour, oxidation, grainsize, texture, structure, hardness, regolith. Quantitative: estimates are made of quartz veining, sulphide and alteration percentages. Magnetic susceptibility recorded on a per metre basis in core holes. Core hole RQD logged. Core photographed wet and dry. Bulk density determination. Logging is both qualitative and quantitative or semi-quantitative in nature. Ricciardo: RC chips were washed and stored in chip trays in 1 m intervals for the entire length of each hole. Chip trays were stored on site in a sealed container. RC chips and diamond core were visually inspected and logged by an onsite geologist to record lithology, alteration, mineralisation, veining, structure, sample quality etc. Logging and sampling have been carried out to industry standards to support a Mineral Resource Estimate. Drill hole logs are recorded in LogChief and uploaded into database (DataShed), and output further validated in 3D software such as Surpac and Micromine. Corrections were then re-submitted to database manager and uploaded to DataShed.
Page 105
105 Criteria JORC Code explanation Commentary Sub-sampling techniques and sample preparation • If core, whether cut or sawn and whether quarter, half or all core taken. • If non-core, whether riffled, tube sampled, rotary split, etc and whether sampled wet or dry. • For all sample types, the nature, quality and appropriateness of the sample preparation technique. • Quality control procedures adopted for all sub-sampling stages to maximise representivity of samples. • Measures taken to ensure that the sampling is representative of the in situ material collected, including for instance results for field duplicate/second-half sampling. • Whether sample sizes are appropriate to the grain size of the material being sampled. RC holes samples were split from dry, 1m bulk samples via a cone splitter directly from the cyclone. RC Field duplicates were collected at a ratio of 1:40 and collected at the same time as the original sample through the B chute of the cone splitter. Matrix matched CRMS and OREAS certified reference material (CRM) were inserted at a ratio of 1:40. The grade ranges of the CRM’s were selected based on grade populations and economic grade ranges. The duplicates and CRM’s were submitted to the lab using unique sample ID’s. 2kg – 3kg RC and DD samples are submitted to the laboratory. Samples are oven dried at 105°C then jaw crushed to -10mm followed by a Boyd crush to a nominal -2mm. Samples were rotary split to 2.5kg. Samples were then pulverised in LM5 mills to 85% passing 75 μm under sample preparation code SP3000 which consists of a 5- minute extended preparation for RC/Soil/RAB. The extended time for the pulverisation is to improve the pulverisation of samples due to the presence of garnets in the samples. All RC and DD analysed for Au using the FA50AAS technique which is a 50g lead collection fire assay. All 4m composite samples were assayed using ALS AuME-TL43, Au + ME by aqua regia extraction with ICP-MS finish.25g sample This sample preparation technique is appropriate for the MGGP; and is standard industry practice for a gold deposit. Samples greater than 3kg are split prior to pulverizing and the remainder discarded. Rock chips were prepared by ALS PUL-24 preparation code, Dry, crush ~2mm, pulverise 1.2kg up to 3kg. Ricciardo: RC samples were split from dry 1 m bulk samples via a splitter directly from the cyclone to obtain a sample mass of 2-3kg. Composite RC samples were generated by taking a spear sample from each 1m green bag to make rough 2 kg sample. Half diamond core samples were taken, generally on 1 m intervals or on geological boundaries where appropriate. Samples including RC chips and diamond core were sorted and dried at 105 ºC in client packaging or trays. All samples weighed and recorded when sample sorting. Pulverize 3kg to nom 85% <75um. All samples were analysed for Au using fire assay. Sample preparation technique is appropriate for Golden Range projects and is standard industry practice for gold deposits. Quality of assay data and laboratory tests • The nature, quality and appropriateness of the assaying and laboratory procedures used and whether the technique is considered partial or total. • For geophysical tools, spectrometers, handheld XRF instruments, etc, the parameters used in determining the analysis including instrument make and model, reading times, calibrations factors applied and their derivation, etc. • Nature of quality control procedures adopted (eg standards, blanks, duplicates, external laboratory checks) and whether acceptable levels of accuracy (ie lack of bias) and precision have been established. RC and DD: Drilling samples were submitted to ALS in Perth. 1m RC samples were assayed by 50gm fire assay which is a total assay. RC Field duplicates were collected at a ratio of 1:40 and collected at the same time as the original sample through the B chute of the cone splitter. Matrix matched CRMS and OREAS certified reference material (CRM) were inserted at a ratio of 1:40. The grade ranges of the CRM’s were selected based on grade populations and economic grade ranges. Rock chips were analysed by ALS AuME-TL43 analysis code Ricciardo: The drilling samples were submitted to Jinning Testing & Inspection’s Perth laboratory. Samples were assayed by 30g fire assay ICP-OES finish from Jinning (FA30I). The multi element assa y were completed b y mixed acid di gest ICP-OES finish (MADI33).
Page 106
106 Criteria JORC Code explanation Commentary The high-grade Sb samples (>3.5%) are reanalysed by fusion method to obtain near total digestion. Field duplicates, blanks and CRMs were selected and placed into sample stream analysed using the same methods. For 1m RC sample sequence, field duplicates were collected at a ratio of 1:50 and collected at the same time as the original sample through the cone splitter. CRMs were inserted at an approximate ratio of 1:15 and blanks were inserted at an approximate ratio of 1:25. For composite RC samples, duplicates, CRMs and blanks were inserted at an approximate ratio of 1:50. For diamond drilling, CRMs were inserted at an approximate ratio of 1:15 and blanks were inserted at an approximate ratio of 1:25. Core duplicates were collected at a ratio of 1:50. No portable XRF analyses result has been used in this release. Verification of sampling and assaying • The verification of significant intersections by either independent or alternative company personnel. • The use of twinned holes. • Documentation of primary data, data entry procedures, data verification, data storage (physical and electronic) protocols. • Discuss any adjustment to assay data. Logging and sampling were recorded directly into a Micromine Geobank template, which utilises lookup tables and in file validation on a Toughbook by the geologist on the rig. Validated data was sent to the database administrator in Perth who then carried out independent verifications using Maxwell’s Datashed. Assay results when received were plotted on section and were verified against neighbouring holes. QAQC reports were generated on a hole-by-hole basis by the database administrator as results were received. Capricorn Metals sampling, data collection in field is captured in an electronic logging system for geological, regolith, sample id, assay and surveying information. Ricciardo: Logging and sampling were recorded on digital logging sheet and digital sample sheet. Information was imported into DataShed database after data validation. File validation was also completed by geologist on the rig. Datashed was also applied for data verification and administration. There were no twin holes drilled during the RC/diamond program. All the sample intervals were visually verified using high quality photography, and significant intersections are verified by company personnel Assay results received were plotted on section and were verified against neighbouring holes. QAQC data were monitored on a hole- by- hole basis. Any failure in company QAQC protocols resulted in follow up with the lab and occasional repeat of assay as necessary. The performance of company standards and blanks were reviewed for each batch of assay results, immediately after results were reported, and any QC fails were investigated and where necessary re-assays were requested, or re-sampling was performed. QAQC analysis and reporting is undertaken by the Geology Database Manager or his/her assistants, who use QAQC Reporter (QAQC-R) by Maxgeo to compare Standard, Blank, and Duplicate Assay results to the target/expected values. The tool produces graphical and numerical output report(s) for comparisons. All assay results can be accessed in DataShed database and interrogated via QAQC Reporter (QAQC-R). Standard Operating Procedure SOP WAR-MINE-GEO-0002 WAR QUALITY ASSURANCE AND QUALITY CONTROL PROCEDURE is used to assign thresholds for pass, further investigation, or immediate fail, and has flowcharts and accept/reject rules that are used to determine the appropriate level and type of investigation and resolution required. In cases of re-assays, after a re-assay batch was checked against the original results and passed QAQC, the re-assays were imported replacing the failed results. There are no other adjustments to any assay data uploaded to the DataShed database.
Page 107
107 Criteria JORC Code explanation Commentary Location of data points • Accuracy and quality of surveys used to locate drill holes (collar and down-hole surveys), trenches, mine workings and other locations used in Mineral Resource estimation. • Specification of the grid system used. • Quality and adequacy of topographic control. All resource related drillhole collar positions were surveyed using hand held GPS. Drillhole location data was initially captured in the MGA94 grid system. Before further resource evaluation work the drillhole locations will be picked up with DGPS by qualified surveyors. Down hole surveys were undertaken on 30m increments from end of hole, using a Reflex down hole gyroscopic tool. The natural surface topography was modelled using a DTM generated from airborne survey, this includes waste dumps and some in-pit waste dumping. Also available are pit surveys of the mining voids at the end of historical mining to enable depletion of the CMM resource. The pit surveys and topography surface were checked in Google Earth for accuracy. Horizontal point accuracy is expected to be <5m and vertical accuracy to 0.5m. The reference datum was GDA94 and the projection was MGA Zone 50. Topographic control appears to be of good quality and is considered adequate for resource estimation. Regional AC drillhole collar positions were surveyed before and after drilling using a handheld GPS. Drillhole location data was captured in the MGA94 grid system. Down hole surveys were not undertaken for the any of the AC drilling due to the shallow nature of the holes. Any regional AC intercepts will be followed up with infill RC drilling using downhole surveys and more accurate collar survey technique. Soil and rock chips sample location were captured using a handheld GPS. All GPS data points were later visualised using ARCGIS software to ensure they were recorded in the correct position The grid system used is UTM GDA 94 Zone 51. Ricciardo: The collection of data including initial coordinates, drill hole ID and type, geological logs, sampling, and assay data were controlled to maintain integrity of the database. The data collection and validation processes were multi-staged, requiring input from geology technicians, geologists, surveying staff, and assay laboratories, however the assigned supervising geologist was responsible for the verification of surveying, sampling, and assaying data for given holes on the drilling programs. Drill hole collars were initially pegged by Warriedar employees using handheld GPS. The holes would be picked-up by a licenced surveyor using DGPS equipment after drilling completed. The surveyed coordinates are checked against the planned locations prior to upload to the database, with any noticeable discrepancies investigated and resolved. During drilling, most holes underwent gyroscopic down hole surveys on 30m increments. Upon completion of the hole a continuous gyroscopic survey with readings taken automatically at 5m or 10m increments inbound and outbound. Each survey was carefully checked to be in bounds of acceptable tolerance. Data was recorded digitally by the drilling contractors using the proprietary software and hardware. The survey data was uploaded by the drilling contractors to the Axis hub website as digital files which were then downloaded as .csv files before QA/QC and further processing and then auto uploaded into Warriedars database hosted by maxgeo. Challenge Drilling and Terra Drilling utilised the Axis Champ North Seeking Gyro tool. Specifications for the Axis Champ North seeking Gyro tool claim an Azimuth Accuracy of +/- 0.75 degrees (Latitude dependent), and an inclination of +/- 0.15 degrees.
Page 108
108 Criteria JORC Code explanation Commentary Data spacing and distribution • Data spacing for reporting of Exploration Results. • Whether the data spacing and distribution is sufficient to establish the degree of geological and grade continuity appropriate for the Mineral Resource and Ore Reserve estimation procedure(s) and classifications applied. • Whether sample compositing has been applied. RC and DD Samples were collected and analysed for each metre down the hole. RC hole spacing was between 50m N x 50m E and 25m N x 25m E, sufficient for resource estimation. Ricciardo: At Ricciardo and Windinne Well exploration drilling has been drilled on a grid pattern. Spacing is considered appropriate for this style of mineralisation and stage of exploration. Hole spacing at Ricciardo and Windinne Well were sufficient for resource estimation. RC Samples have been composited to 4m lengths outside the proposed main target zones. Orientation of data in relation to geological structure • Whether the orientation of sampling achieves unbiased sampling of possible structures and the extent to which this is known, considering the deposit type. • If the relationship between the drilling orientation and the orientation of key mineralised structures is considered to have introduced a sampling bias, this should be assessed and reported if material. Drill lines are oriented across strike on an MGA grid. MGGP orebody dips at 80 degrees to the East. Holes in the drill Programmes have been mostly drilled at inclination of -55 to -60 degrees. The orientation of the drilling is suitable for the mineralisation style and orientation of the target mineralisation. Ricciardo: Warriedars and historical drilling are mainly orientated perpendicular to the main structural trend of the area; however, there are multiple mineralisation events and there is insufficient data to confirm the geological model. No sampling bias is considered to have been introduced by the existing sampling orientation. Sample security • The measures taken to ensure sample security. Calico sample bags are sealed into green bags/polyweave bags and cable tied. These bags were then sealed in bulka bags by company personnel and dispatched by third party contractor. In-company reconciliation is completed with laboratory assay returns. Soil and rock chip samples collected by CMM and stored on site, prior to being transported to the laboratory ALS. Ricciardo: Calico sample bags are tied, grouped by sample ID placed into polyweave sacks and cable tied. These sacks were then appropriately grouped, placed within larger in labelled bulka bags for ease of transport by company personnel or third-party transport contractor. Each dispatch was itemised and emailed to the laboratory for reconciliation upon arrival. A unique dispatch number is used for each batch of samples sent to the assaying laboratory for tracking purposes and the laboratory acknowledges receipt of each sample dispatch by email. All discrepancies identified on receipt of the samples by the assaying laboratory were investigated and corrected. Audits or reviews • The results of any audits or reviews of sampling techniques and data. The Competent Person for Exploration Results reported here has visited the project areas where sampling has taken place and has reviewed and confirmed the sampling procedures. Ricciardo: The competent person for exploration results has visited the project where sampling has taken place and has reviewed and confirmed the sampling procedures. Section 2 Reporting of Exploration Results (Criteria listed in the preceding section also apply to this section.) Criteria JORC Code explanation Commentary Mineral tenement and • Type, reference name/number, location and ownership including agreements or material issues with third parties such as joint ventures, partnerships, overriding royalties, native MGGP: The resource is located across mining tenements held by wholly owned Capricorn subsidiaries
Page 109
109 Criteria JORC Code explanation Commentary land tenure status title interests, historical sites, wilderness or national park and environmental settings. • The security of the tenure held at the time of reporting along with any known impediments to obtaining a licence to operate in the area. All of the tenements are subject to a 1% NSR royalty to Avenger Projects Ltd, including gold production above 90,000 ounces. A royalty is also payable to St Barbara Limited on all gold production in excess of 20,000 ounces (excluding production from historic waste dumps and tailings) at the rate of $10 per ounce, applicable to leases M 59/328, M 59/402, M 59/403, M 59/404, G 59/11, G 59/12, G 59/13, G 59/14, G 59/15, G 59/16, G 59/17, G 59/18, L 59/45, L 59/46, L 59/53 No other known impediments exist to operate in the area. KGP: The Bibra deposit is located in M 52/1070 held by Greenmount Resources, a wholly owned subsidiary of Capricorn Metals. M52/1070 is within the area of granted E52/1711 exploration tenement in the Pilbara region of Western Australia. E52/1711 was acquired from BHPB in 2008. South32 (via the spin-out from BHPB) retain a 2% NSR whilst BHPB a claw-back provision whereby BHPB can elect to acquire a 70% equity in the project only if JORC compliant reported resources of 5,000,000 ounces of gold and/or 120,000 tonnes of contained nickel have been delineated. The Nyiyaparli People hold Native Title over the area including E52/1711 and M52/1070. There is no known heritage or environmental impediments over the lease. No other known impediments exist to operate in the area. Golden Range: There are 63 tenements associated with Golden Range and Fields Find. Among them, 19 are mining leases, 26 are exploration licences and 2 are in prospecting licences. The rest of the tenements are general purpose leases and miscellaneous licences. Third party rights include: 1) Gindalbie iron ore rights; 2) Fenix Resources’ iron ore rights for the Shine project; 3) Messenger’s Patch JV rights on M 59/357 and E 59/852: 4) Mt Gibson’s iron ore and non-metalliferous dimension stone rights on Fields Find; 5) GoldEX Royalty to Anketell Pty Ltd for 0.75% of gold and other metals production from M 59/379 and M 59/380; 6) 2% NSR royalty on products produced from Fields Find tenements to Mt Gibson; 7) Royalty of A$5 per oz of gold produced payable to the estate of Mr Gary Mason, limited to 50Koz produced from P 59/1343, which covers part of E 59/1268. 8) Minjar Gold royalty of A$ 20 per oz of gold production from the tenements acquired from Minjar Gold, subject to a minimum received gold price within the relevant quarter of A$2,000 per oz, with a cap of A$18 million. Ricciardo is located on Mining leases M59/421-I and M59/458-I. Windinne Well is located on mining leases M59/219-I and M59/421-I. Native Title and Heritage The Mining Tenements are within the Widi Mob native title claim area. The Widi Mob claim was combined with the claims of three other groups (Southern Yamatji, Hutt River and Mullewa Wadjari) over areas to the west to form the Yamatji Nation native title claim. The native title claims of these groups was resolved in 2020 by the entry of those groups and the State into the Yamatji Nation Indigenous Land Use Agreement (ILUA). The ILUA recognised non-exclusive native title rights and interests in discrete, culturally significant parcels of land (<1% of the total claim area) and the creation of managed reserves and conservation areas jointly managed with DCBA. The Mining Tenements are not within these areas. Under the ILUA, the State agreed to pay compensation to the claimant groups for future acts and for the surrender of the balance of native title rights in the claim areas. This resolves native title claims over the areas of the Mining Tenements without the need for further agreements between the Company and claimant groups. A search of the Aboriginal Heritage Inquiry System shows that there are no registered or lodged sites recorded in the areas of the Mining Tenements. The area of the Mining Tenements has been the subject of extensive heritage surveys in the past. Currently all the tenements are in good standing. There are no known impediments to obtaining licences to operate in all areas.
Page 110
110 Criteria JORC Code explanation Commentary Exploration done by other parties • Acknowledgment and appraisal of exploration by other parties. MGGP: The Mt Gibson Gold Deposit (Mt Gibson) has a history of minor gold production dating back to the 1930’s when prospectors operated small gold workings at Paynes-Crusoe and Tobias Find. While the area was subject to previous prospecting and company exploration in smaller leaseholdings, the Mt. Gibson Gold Project was first held in more-or- less its present configuration and extent by Reynolds Australia, who commenced exploration in the early 1980’s. Soil and laterite sampling resulted in several significant gold and base metal anomalies being defined; follow up rotary air blast (RAB), air core (AC), reverse circulation (RC) and diamond drilling Programmes outlined significant economic laterite and oxide resources. A joint venture between Reynolds Australia Metals and Forsayth Mining Limited (with FML as the operator) began operations in 1986, mining and processing 6.5 million tonnes of laterite ores defined by FML in 1984, followed later by oxide and sulphide ores defined by drilling beneath the laterite orebodies. The project was sold by Reynolds to Camelot Resources in 1995. Continuing exploration resulted in the discovery of further oxide resources, mainly on the Taurus Trend, and the underground quartz-sulphide deposit at Wombat. These resources were subsequently mined and processed, all mining being completed at the end of 1997 and final milling of low grade stockpiles completed in June of 1998. A 4Mt dump leach remained in operation until November 1998, producing 68,868 ounces of gold. Including the dump leach, a total of 16,477,882 tonnes of ore was processed during the life of the operation, for 868,478 ounces of gold at an overall average grade of 1.64g/t Au. KGP: Prior to Capricorn Metals, E52/1711 was held by Independence group (IGO) who undertook exploration between 2008 & 2014. Prior to Independence group, WMC (BHPB) explored the area from 2004 to 2008. Golden Range: Gold exploration at the region commenced in the 1980s. Normandy Exploration commenced the systematic exploration in late 1980s and 1990s. Project were acquired by Gindalbie Gold N.L. in December 1999. Golden Stallion Resources Pty Ltd acquired the whole project in March 2009. Shandong Tianye purchased 51% of Minjar (the operating company) in July 2009. Minjar became the wholly owned subsidiary of Tianye in 2010. The database, completed by multiple companies using a combination technic of Reserve Circulation (RC), diamond drilling (DD), aircore (AC), Auger and RAB. Most of the drill holes were completed during the period of 2001-2004 and 2013-2018 by Gindalbie and Minjar respectively. DC Mines Pty Ltd acquired Golden Range and the majority of Fields Find from Minjar Gold Pty Ltd in November 2022. Warriedar Resources Limited (then named Anova Metals Limited) acquired DC Mines in February 2023. A number of due diligence exercises and MRE updates occurred during the above transactions. Geology • Deposit type, geological setting and style of mineralisation. MGGP: The Mt Gibson Gold Project tenements are located at the southern extremity of the Retaliation Greenstone Belt, in the SW portion of the Yalgoo-Singleton Greenstone Belt in the Murchison Province of the Yilgarn Craton. The tenements are mostly covered by a veneer of alluvial quartz sands and laterite gravels, with sporadic greenstone subcrop and outcrop, increasingly exposed in the north of the project area. The mineralised laterite gravels are situated slightly down-slope from the lode deposits on the Gibson trend. Regionally, the greenstone belt has been metamorphosed to middle amphibolite facies and hosts a number of Au-Cu deposits and prospects, including Golden Grove, 90km to the northwest of Mt.Gibson. The lode style mineralisation at Mt. Gibson is predominantly hosted by three main trends:
Page 111
111 Criteria JORC Code explanation Commentary The Gibson Trend The majority of the known and mined mineralisation is hosted by this trend. It is hypothesised to have originally been a gold-copper-zinc rich Volcanogenic Hosted Massive Sulphide (VHMS) deposit that has been overprinted by a later hydrothermal gold mineralising event. This mineralised shear zone has an arcuate north-south to northeasterly strike (trending more north-easterly in the north) and extends for more than seven kilometres from the southern granite contact to beyond the Hornet ore body. The so-called “Mine Sequence” is around 400 metres wide and consists of a parcel of sheared, metamorphosed and chlorite-biotite-muscovite altered mafic volcanics. Numerous felsic porphyries intrude the Mine Sequence. Mineralisation is hosted within multiple sets of elongate lodes with strong strike continuity, which anastomose and pinch-swell along strike and to depth. The main lode systems include Hornet, Enterprise, Orion and S2. The Taurus Trend The north-westerly trending Taurus Trend lies west of and diagonal to the Gibson Trend. Mineralisation is intimately associated with an apparently continuous felsic unit emplaced into the northwest trending shear and was discovered late in the life of the mining operation. It is characterised by discontinuous ore bodies, and strongly mineralised quartz-sulphide veining. The ore bodies on this trend include Sheldon and Wombat which, although not as continuous in strike as the ore bodies on the Gibson Trend, show a higher gold tenor. The Highway Trend The Highway Trend is a northeast trending shear zone, hosted by a mafic sequence in the western terrain, 11km northwest of the main mining area. This trend hosts the Highway ore body, and the Phoenix and Aquarius Prospects. It shares many of the characteristics of the Gibson trend, but it appears to lack the VHMS mineralising event and has generally been regarded as a predominantly low-grade system, although work from previous explores suggest it may have greater persistence and significance than previously thought and hence justifies further attention. The project area also hosts a number of BIF and quartz hosted small mineral occurrences including Paynes-Crusoe and MacDonald’s Find. KGP Bibra is part of a large-scale Archaean aged gold mineralised system. The resource is hosted within a package of deformed meta-sediments which has developed on at least two parallel, shallow dipping structures; Laterite oxide mineralization has developed over the structures close to surface. The primary mineralisation is strata-bound with lineations identified as controlling higher-grade shoots. The deposit is oxidized to average depths of 50-70m. Golden Range In the Golden Range area, gold mineralisation is dominantly controlled by structures and lithologies. North trending shear zones and secondary structures are interpreted to be responsible for the hydrothermal activity that produced many of the region’s gold deposits. Two major shear structures have been identified, the Mougooderra Shear Zone and the Chulaar Shear Zone; both striking approximately north and controlling the occurrence of gold deposits. Host lithology units for gold mineralisation are predominantly the intensely altered mafic to ultramafic units, BIF, and dolerite intrusions. Main mechanism for mineralisation is believed to be associated with: 1 ) Shear zones as a re gional control for fluid; 2 ) dolerite
Page 112
112 Criteria JORC Code explanation Commentary intrusions to be reacted and mineralised with auriferous fluids; 3) BIF as a rheological and chemical control; 4) porphyry intrusions associated with secondary or tertiary brittle structures to host mineralisation. 3 main stages of mineralisation observed, including stage 1: nickel bearing gold mineralisation, stage 2 arsenic bearing gold mineralisation, and stage 3 antimony bearing gold-antimony mineralisation. Stage 2 mineralisation responsible for the most of the gold mineralisation and Stage 3 mineralisation occurred later but brought significant antimony into the system. In the Golden Range area, the most significant base metal deposit is Golden Grove, which consists of Gossan Hill, Scuddles, Flix and Flying Hill, The Gossan Hill deposit is a volcanic-hosted massive sulfide system within the Archean Golden Grove Formation of the Yilgarn Craton, WA. The mineralisation is hosted in Golden Grove formation, a ~550 m thick felsic volcaniclastic succession (tuffaceous sandstones, siltstones, breccias), deposited by subaqueous mass flows. Two main ore zones includes Lower Cu- rich zone: pyrite-chalcopyrite-pyrrhotite, associated with massive magnetite lenses (up to 40 m thick) and Upper Zn-rich zone: massive sphalerite-pyrite with galena, tetrahedrite, minor Au–Ag phases. Drill hole Information • A summary of all information material to the understanding of the exploration results including a tabulation of the following information for all Material drill holes: o easting and northing of the drill hole collar o elevation or RL (Reduced Level – elevation above sea level in metres) of the drill hole collar o dip and azimuth of the hole o down hole length and interception depth o hole length. • If the exclusion of this information is justified on the basis that the information is not Material and this exclusion does not detract from the understanding of the report, the Competent Person should clearly explain why this is the case. All relevant drillhole information can be found in section 1 – “Sampling techniques”, “Drilling techniques” and “Drill Sample Recovery” and the significant intercepts table. Data aggregation methods • In reporting Exploration Results, weighting averaging techniques, maximum and/or minimum grade truncations (eg cutting of high grades) and cut-off grades are usually Material and should be stated. • Where aggregate intercepts incorporate short lengths of high grade results and longer lengths of low grade results, the procedure used for such aggregation should be stated and some typical examples of such aggregations should be shown in detail. • The assumptions used for any reporting of metal equivalent values should be clearly stated. Reported MGGP and Karlawinda Open Pit and Regional highlights intercepts are reported sufficient for open pit mining methods and include a minimum of 0.5g/t Au value over a minimum length of 1m with a maximum 2m length of consecutive internal waste. No upper cuts have been applied. Reported MGGP Orion Domain underground focused intercepts are reported sufficient for underground mining methods and include a minimum of 1g/t Au value over a minimum length of 1m with a maximum 2m length of consecutive internal waste. No upper cuts have been applied. Reported MGGP Lexington-Hornet Domain underground focused intercepts are reported sufficient for underground mining methods and include a minimum of 1g/t Au value over a minimum length of 1m with a maximum 5.5m length of consecutive internal waste. No upper cuts have been applied. Ricciardo: Significant intercepts table of Ricciardo assay drill intersections using a 0.5 g/t AuEq cut-off, with a minimum width of 0.2 meters and a maximum of 2 meters of consecutive internal waste. Significant intercepts table of Windinne assay drill intersections using a 0.5 g/t Au cut-off, with a minimum width of 0.2 meters and a maximum of 2 meters of consecutive internal waste. No upper cuts have been applied. No aggregation methods have been applied for the chips. No upper cuts have been applied. No metal equivalent values were reported.
Page 113
113 Criteria JORC Code explanation Commentary Relationship between mineralisation widths and intercept lengths • These relationships are particularly important in the reporting of Exploration Results. • If the geometry of the mineralisation with respect to the drill hole angle is known, its nature should be reported. • If it is not known and only the down hole lengths are reported, there should be a clear statement to this effect (eg ‘down hole length, true width not known’). MGGP: The mineralisation dips steeply to the east, and drilling is generally orientated at 60 degrees to the west, meaning intercepts are roughly perpendicular to mineralisation in the majority of cases. Some vertical holes drilled from the base of mined pits and are therefore at a high degree to the mineralisation. KGP: At Bibra, the geometry of the mineralisation has already been defined from previous drilling programs and current mining. The intersection angle between drill angle and the perpendicular angle to the ore zone is less than 10 degrees. Ricciardo: Gold mineralisation at Ricciardo dips about 70 degrees to the west. Drill holes in this release are orientated between -50 degree to -75 degree the east at Ricciardo. Gold mineralisation at Windinne Well is about vertical and strike north-south. The drill hole in this release is orientated the west with 62.6 degree dip at Windinne Well. The majority of the historical drill holes at Ricciardo were drilled as inclined holes with dipping angles close to - 60 degree from multiple orientations; most of the drill holes are toward east. This is considered to be appropriate for the interpreted dip of the major mineralised structure and intrusions and creating minimal sampling bias. The majority of the historical drill holes at Windinne Well were drilled as inclined holes with dipping angles close to -60 degree from multiple orientations; most of the drill holes are toward the west. This is considered to be appropriate for the interpreted dip of the major mineralised structure and creating minimal sampling bias. Diagrams • Appropriate maps and sections (with scales) and tabulations of intercepts should be included for any significant discovery being reported These should include, but not be limited to a plan view of drill hole collar locations and appropriate sectional views. Refer to the diagrams in the body of this report. Balanced reporting • Where comprehensive reporting of all Exploration Results is not practicable, representative reporting of both low and high grades and/or widths should be practiced to avoid misleading reporting of Exploration Results. The accompanying document is considered to be a balanced report with a suitable cautionary note. Other substantive exploration data • Other exploration data, if meaningful and material, should be reported including (but not limited to): geological observations; geophysical survey results; geochemical survey results; bulk samples – size and method of treatment; metallurgical test results; bulk density, groundwater, geotechnical and rock characteristics; potential deleterious or contaminating substances. No other material information or data to report. Further work • The nature and scale of planned further work (eg tests for lateral extensions or depth extensions or large-scale step-out drilling). • Diagrams clearly highlighting the areas of possible extensions, including the main geological interpretations and future drilling areas, provided this information is not commercially sensitive. Further work includes continued resource infill RC drilling at both projects. Section 3 Estimation and Reporting of Mineral Resources (Criteria listed in section 1, and where relevant in section 2, also apply to this section.) Criteria JORC Code explanation Commentary Database integrity • Measures taken to ensure that data has not been corrupted by, for example, transcription or keying errors, between its initial collection and its use for Mineral Resource estimation purposes. • Data validation procedures used. No Mineral Resource Estimation update being reported.
Page 114
114 Criteria JORC Code explanation Commentary Site visits • Comment on any site visits undertaken by the Competent Person and the outcome of those visits. • If no site visits have been undertaken indicate why this is the case. No Mineral Resource Estimation update being reported. Geological interpretation • Confidence in (or conversely, the uncertainty of) the geological interpretation of the mineral deposit. • Nature of the data used and of any assumptions made. • The effect, if any, of alternative interpretations on Mineral Resource estimation. • The use of geology in guiding and controlling Mineral Resource estimation. • The factors affecting continuity both of grade and geology. No Mineral Resource Estimation update being reported. Dimensions • The extent and variability of the Mineral Resource expressed as length (along strike or otherwise), plan width, and depth below surface to the upper and lower limits of the Mineral Resource. No Mineral Resource Estimation update being reported. Estimation and modelling techniques • The nature and appropriateness of the estimation technique(s) applied and key assumptions, including treatment of extreme grade values, domaining, interpolation parameters and maximum distance of extrapolation from data points. If a computer assisted estimation method was chosen include a description of computer software and parameters used. • The availability of check estimates, previous estimates and/or mine production records and whether the Mineral Resource estimate takes appropriate account of such data. • The assumptions made regarding recovery of by-products. • Estimation of deleterious elements or other non-grade variables of economic significance (eg sulphur for acid mine drainage characterisation). • In the case of block model interpolation, the block size in relation to the average sample spacing and the search employed. • Any assumptions behind modelling of selective mining units. • Any assumptions about correlation between variables. • Description of how the geological interpretation was used to control the resource estimates. • Discussion of basis for using or not using grade cutting or capping. • The process of validation, the checking process used, the comparison of model data to drill hole data, and use of reconciliation data if available. No Mineral Resource Estimation update being reported. Moisture • Whether the tonnages are estimated on a dry basis or with natural moisture, and the method of determination of the moisture content. No Mineral Resource Estimation update being reported. Cut-off parameters • The basis of the adopted cut-off grade(s) or quality parameters applied. No Mineral Resource Estimation update being reported. Mining factors or assumptions • Assumptions made regarding possible mining methods, minimum mining dimensions and internal (or, if applicable, external) mining dilution. It is always necessary as part of the process of determining reasonable prospects for eventual economic extraction to consider potential mining methods, but the assumptions made regarding mining methods and parameters when estimating Mineral Resources may not always be rigorous. Where this is the case, this should be reported with an explanation of the basis of the mining assumptions made. No Mineral Resource Estimation update being reported. Metallurgical factors or assumptions • The basis for assumptions or predictions regarding metallurgical amenability. It is always necessary as part of the process of determining reasonable prospects for eventual economic extraction to consider potential metallurgical methods, but the assumptions regarding metallurgical treatment processes and parameters made when reporting No Mineral Resource Estimation update being reported.
Page 115
115 Criteria JORC Code explanation Commentary Mineral Resources may not always be rigorous. Where this is the case, this should be reported with an explanation of the basis of the metallurgical assumptions made. Environmental factors or assumptions • Assumptions made regarding possible waste and process residue disposal options. It is always necessary as part of the process of determining reasonable prospects for eventual economic extraction to consider the potential environmental impacts of the mining and processing operation. While at this stage the determination of potential environmental impacts, particularly for a greenfields project, may not always be well advanced, the status of early consideration of these potential environmental impacts should be reported. Where these aspects have not been considered this should be reported with an explanation of the environmental assumptions made. No Mineral Resource Estimation update being reported. Bulk density • Whether assumed or determined. If assumed, the basis for the assumptions. If determined, the method used, whether wet or dry, the frequency of the measurements, the nature, size and representativeness of the samples. • The bulk density for bulk material must have been measured by methods that adequately account for void spaces (vugs, porosity, etc), moisture and differences between rock and alteration zones within the deposit. • Discuss assumptions for bulk density estimates used in the evaluation process of the different materials. No Mineral Resource Estimation update being reported. Classification • The basis for the classification of the Mineral Resources into varying confidence categories. • Whether appropriate account has been taken of all relevant factors (ie relative confidence in tonnage/grade estimations, reliability of input data, confidence in continuity of geology and metal values, quality, quantity and distribution of the data). • Whether the result appropriately reflects the Competent Person’s view of the deposit. No Mineral Resource Estimation update being reported. Audits or reviews • The results of any audits or reviews of Mineral Resource estimates. No Mineral Resource Estimation update being reported. Discussion of relative accuracy/ confidence • Where appropriate a statement of the relative accuracy and confidence level in the Mineral Resource estimate using an approach or procedure deemed appropriate by the Competent Person. For example, the application of statistical or geostatistical procedures to quantify the relative accuracy of the resource within stated confidence limits, or, if such an approach is not deemed appropriate, a qualitative discussion of the factors that could affect the relative accuracy and confidence of the estimate. • The statement should specify whether it relates to global or local estimates, and, if local, state the relevant tonnages, which should be relevant to technical and economic evaluation. Documentation should include assumptions made and the procedures used. • These statements of relative accuracy and confidence of the estimate should be compared with production data, where available. No Mineral Resource Estimation update being reported. Section 4 Estimation and Reporting of Ore Reserves (Criteria listed in section 1, and where relevant in sections 2 and 3, also apply to this section.) Criteria JORC Code explanation Commentary Mineral Resource estimate for • Description of the Mineral Resource estimate used as a basis for the conversion to an Ore Reserve. • Clear statement as to whether the Mineral Resources are reported additional to, or inclusive of, the Ore Reserves. No Ore Reserve being reported.
Page 116
116 Criteria JORC Code explanation Commentary conversion to Ore Reserves Site visits • Comment on any site visits undertaken by the Competent Person and the outcome of those visits. • If no site visits have been undertaken indicate why this is the case. No Ore Reserve being reported. Study status • The type and level of study undertaken to enable Mineral Resources to be converted to Ore Reserves. • The Code requires that a study to at least Pre-Feasibility Study level has been undertaken to convert Mineral Resources to Ore Reserves. Such studies will have been carried out and will have determined a mine plan that is technically achievable and economicall y viable, and that material Modifying Factors have been considered. No Ore Reserve being reported. Cut-off parameters • The basis of the cut-off grade(s) or quality parameters applied. No Ore Reserve being reported. Mining factors or assumptions • The method and assumptions used as reported in the Pre-Feasibility or Feasibility Study to convert the Mineral Resource to an Ore Reserve (i.e. either by application of appropriate factors by optimisation or by preliminary or detailed design). • The choice, nature and appropriateness of the selected mining method(s) and other mining parameters including associated design issues such as pre-strip, access, etc. • The assumptions made regarding geotechnical parameters (eg pit slopes, stope sizes, etc), grade control and pre-production drilling. • The major assumptions made and Mineral Resource model used for pit and stope optimisation (if appropriate). • The mining dilution factors used. • The mining recovery factors used. • Any minimum mining widths used. • The manner in which Inferred Mineral Resources are utilised in mining studies and the sensitivity of the outcome to their inclusion. • The infrastructure requirements of the selected mining methods. No Ore Reserve being reported. Metallurgical factors or assumptions • The metallurgical process proposed and the appropriateness of that process to the style of mineralisation. • Whether the metallurgical process is well-tested technology or novel in nature. • The nature, amount and representativeness of metallurgical test work undertaken, the nature of the metallurgical domaining applied and the corresponding metallurgical recovery factors applied. • Any assumptions or allowances made for deleterious elements. • The existence of any bulk sample or pilot scale test work and the degree to which such samples are considered representative of the orebody as a whole. • For minerals that are defined by a specification, has the ore reserve estimation been based on the appropriate mineralogy to meet the specifications? No Ore Reserve being reported. Environmental • The status of studies of potential environmental impacts of the mining and processing operation. Details of waste rock characterisation and the consideration of potential sites, status of design options considered and, where applicable, the status of approvals for process residue storage and waste dumps should be reported. No Ore Reserve being reported. Infrastructure • The existence of appropriate infrastructure: availability of land for plant development, power, water, transportation (particularly for bulk commodities), labour, accommodation; or the ease with which the infrastructure can be provided, or accessed. No Ore Reserve being reported.
Page 117
117 Criteria JORC Code explanation Commentary Costs • The derivation of, or assumptions made, regarding projected capital costs in the study. • The methodology used to estimate operating costs. • Allowances made for the content of deleterious elements. • The derivation of assumptions made of metal or commodity price(s), for the principal minerals and co- products. • The source of exchange rates used in the study. • Derivation of transportation charges. • The basis for forecasting or source of treatment and refining charges, penalties for failure to meet specification, etc. • The allowances made for royalties payable, both Government and private. No Ore Reserve being reported. Revenue factors • The derivation of, or assumptions made regarding revenue factors including head grade, metal or commodity price(s) exchange rates, transportation and treatment charges, penalties, net smelter returns, etc. • The derivation of assumptions made of metal or commodity price(s), for the principal metals, minerals and co- products. No Ore Reserve being reported. Market assessment • The demand, supply and stock situation for the particular commodity, consumption trends and factors likely to affect supply and demand into the future. • A customer and competitor analysis along with the identification of likely market windows for the product. • Price and volume forecasts and the basis for these forecasts. • For industrial minerals the customer specification, testing and acceptance requirements prior to a supply contract. No Ore Reserve being reported. Economic • The inputs to the economic analysis to produce the net present value (NPV) in the study, the source and confidence of these economic inputs including estimated inflation, discount rate, etc. • NPV ranges and sensitivity to variations in the significant assumptions and inputs. No Ore Reserve being reported. Social • The status of agreements with key stakeholders and matters leading to social licence to operate. No Ore Reserve being reported. Other • To the extent relevant, the impact of the following on the project and/or on the estimation and classification of the Ore Reserves: • Any identified material naturally occurring risks. • The status of material legal agreements and marketing arrangements. • The status of governmental agreements and approvals critical to the viability of the project, such as mineral tenement status, and government and statutory approvals. There must be reasonable grounds to expect that all necessary government approvals will be received within the timeframes anticipated in the Pre-Feasibility or Feasibility study. Highlight and discuss the materiality of any unresolved matter that is dependent on a third party on which extraction of the reserve is contingent. No Ore Reserve being reported. Classification • The basis for the classification of the Ore Reserves into varying confidence categories. • Whether the result appropriately reflects the Competent Person’s view of the deposit. • The proportion of Probable Ore Reserves that have been derived from Measured Mineral Resources (if any). No Ore Reserve being reported. Audits or reviews • The results of any audits or reviews of Ore Reserve estimates. No Ore Reserve being reported. Discussion of relative • Where appropriate a statement of the relative accuracy and confidence level in the Ore Reserve estimate using an approach or procedure deemed appropriate b y the No Ore Reserve being reported.
Page 118
118 Criteria JORC Code explanation Commentary accuracy/ confidence Competent Person. For example, the application of statistical or geostatistical procedures to quantify the relative accuracy of the reserve within stated confidence limits, or, if such an approach is not deemed appropriate, a qualitative discussion of the factors which could affect the relative accuracy and confidence of the estimate. • The statement should specify whether it relates to global or local estimates, and, if local, state the relevant tonnages, which should be relevant to technical and economic evaluation. Documentation should include assumptions made and the procedures used. • Accuracy and confidence discussions should extend to specific discussions of any applied Modifying Factors that may have a material impact on Ore Reserve viability, or for which there are remaining areas of uncertainty at the current study stage. • It is recognised that this may not be possible or appropriate in all circumstances. These statements of relative accuracy and confidence of the estimate should be compared with production data, where available.
Page 119
Rule 5.5 ASX Listing Rules Appendix 5B (17/07/20) Page 1 + See chapter 19 of the ASX Listing Rules for defined terms. Appendix 5B Mining exploration entity or oil and gas exploration entity quarterly cash flow report Name of entity Capricorn Metals Ltd ABN Quarter ended (“current quarter”) 84 121 700 105 30 June 2026 Consolidated statement of cash flows Current quarter $A’000 Year to date (12 months) $A’000 1. Cash flows from operating activities 215,233 769,345 1.1 Receipts from customers 1.2 Payments for - - (a) exploration & evaluation (b) development - - (c) production (73,961) (282,875) (d) staff costs (2,933) (10,517) (e) administration and corporate costs (2,308) (11,940) 1.3 Dividends received (see note 3) - - 1.4 Interest received 4,397 15,592 1.5 Interest and other costs of finance paid (339) (1,756) 1.6 Income taxes paid (5,256) (18,741) 1.7 Government grants and tax incentives - - 1.8 Other (provide details if material) 283 311 1.9 Net cash from / (used in) operating activities 135,116 459,419 2. Cash flows from investing activities - - 2.1 Payments to acquire or for: (a) entities (b) tenements - - (c) property, plant and equipment (43,910) (162,418) (d) exploration & evaluation (29,456) (96,530) (e) investments (615) (1,815) (f) other non-current assets (14,344) (43,268) 2.2 Proceeds from the disposal of: - - (a) entities (b) tenements - - (c) property, plant and equipment 962 962 (d) investments - - (e) other non-current assets - - 2.3 Cash flows from loans to other entities - - 2.4 Dividends received (see note 3) - - 2.5 Other (provide details if material)* - 13,803 2.6 Net cash from / (used in) investing activities (87,363) (289,266) * Other includes cash received upon acquisition of Warriedar Resources Limited.
Page 120
Appendix 5B Mining exploration entity or oil and gas exploration entity quarterly cash flow report ASX Listing Rules Appendix 5B (17/07/20) Page 2 + See chapter 19 of the ASX Listing Rules for defined terms. Consolidated statement of cash flows Current quarter $A’000 Year to date (12 months) $A’000 3. Cash flows from financing activities - - 3.1 Proceeds from issues of equity securities (excluding convertible debt securities) 3.2 Proceeds from issue of convertible debt securities - - 3.3 Proceeds from exercise of options 33 1,991 3.4 Transaction costs related to issues of equity securities or convertible debt securities (2) (257) 3.5 Proceeds from borrowings - - 3.6 Repayment of borrowings - - 3.7 Transaction costs related to loans and borrowings - - 3.8 Dividends paid (22,836) (22,836) 3.9 Other (provide details if material) - - 3.10 Net cash from / (used in) financing activities (22,805) (21,102) 4. Net increase / (decrease) in cash and cash equivalents for the period 4.1 Cash and cash equivalents at beginning of period 479,871 355,760 4.2 Net cash from / (used in) operating activities (item 1.9 above) 135,116 459,419 4.3 Net cash from / (used in) investing activities (item 2.6 above) (87,363) (289,266) 4.4 Net cash from / (used in) financing activities (item 3.10 above) (22,805) (21,102) 4.5 Effect of movement in exchange rates on cash held (8) - 4.6 Cash and cash equivalents at end of period 504,811 504,811 5. Reconciliation of cash and cash equivalents at the end of the quarter (as shown in the consolidated statement of cash flows) to the related items in the accounts Current quarter $A’000 Previous quarter $A’000 5.1 Bank balances 504,811 479,871 5.2 Call deposits - - 5.3 Bank overdrafts - - 5.4 Other (provide details) - - 5.5 Cash and cash equivalents at end of quarter (should equal item 4.6 above) 504,811 479,871 6. Payments to related parties of the entity and their associates Current quarter $A'000 6.1 Aggregate amount of payments to related parties and their associates included in item 1 489 6.2 Aggregate amount of payments to related parties and their associates included in item 2 - Note: if any amounts are shown in items 6.1 or 6.2, your quarterly activity report must include a description of, and an explanation for, such payments.
Page 121
Appendix 5B Mining exploration entity or oil and gas exploration entity quarterly cash flow report ASX Listing Rules Appendix 5B (17/07/20) Page 3 + See chapter 19 of the ASX Listing Rules for defined terms. 7. Financing facilities Note: the term “facility’ includes all forms of financing arrangements available to the entity. Add notes as necessary for an understanding of the sources of finance available to the entity. Total facility amount at quarter end $A’000 Amount drawn at quarter end $A’000 7.1 Loan facilities - - 7.2 Credit standby arrangements - - 7.3 Other (Bank Guarantee) - - 7.4 Total financing facilities - - 7.5 Unused financing facilities available at quarter end Nil 7.6 Include in the box below a description of each facility above, including the lender, interest rate, maturity date and whether it is secured or unsecured. If any additional financing facilities have been entered into or are proposed to be entered into after quarter end, include a note providing details of those facilities as well. 8. Estimated cash available for future operating activities $A’000 8.1 Net cash from / (used in) operating activities (item 1.9) 135,116 8.2 (Payments for exploration & evaluation classified as investing activities) (item 2.1(d)) (29,456) 8.3 Total relevant outgoings (item 8.1 + item 8.2) 105,660 8.4 Cash and cash equivalents at quarter end (item 4.6) 504,811 8.5 Unused finance facilities available at quarter end (item 7.5) - 8.6 Total available funding (item 8.4 + item 8.5) 504,811 8.7 Estimated quarters of funding available (item 8.6 divided by item 8.3) N/A Note: if the entity has reported positive relevant outgoings (ie a net cash inflow) in item 8.3, answer item 8.7 as “N/A”. Otherwise, a figure for the estimated quarters of funding available must be included in item 8.7. 8.8 If item 8.7 is less than 2 quarters, please provide answers to the following questions: 8.8.1 Does the entity expect that it will continue to have the current level of net operating cash flows for the time being and, if not, why not? Answer: N/A 8.8.2 Has the entity taken any steps, or does it propose to take any steps, to raise further cash to fund its operations and, if so, what are those steps and how likely does it believe that they will be successful? Answer: N/A 8.8.3 Does the entity expect to be able to continue its operations and to meet its business objectives and, if so, on what basis? Answer: N/A Note: where item 8.7 is less than 2 quarters, all of questions 8.8.1, 8.8.2 and 8.8.3 above must be answered.
Page 122
Appendix 5B Mining exploration entity or oil and gas exploration entity quarterly cash flow report ASX Listing Rules Appendix 5B (17/07/20) Page 4 + See chapter 19 of the ASX Listing Rules for defined terms. Compliance statement 1 This statement has been prepared in accordance with accounting standards and policies which comply with Listing Rule 19.11A. 2 This statement gives a true and fair view of the matters disclosed. Date: 31 July 2026 Authorised by: By the Board (Name of body or officer authorising release – see note 4) Notes 1. This quarterly cash flow report and the accompanying activity report provide a basis for informing the market about the entity’s activities for the past quarter, how they have been financed and the effect this has had on its cash position. An entity that wishes to disclose additional information over and above the minimum required under the Listing Rules is encouraged to do so. 2. If this quarterly cash flow report has been prepared in accordance with Australian Accounting Standards, the definitions in, and provisions of, AASB 6: Exploration for and Evaluation of Mineral Resources and AASB 107: Statement of Cash Flows apply to this report. If this quarterly cash flow report has been prepared in accordance with other accounting standards agreed by ASX pursuant to Listing Rule 19.11A, the corresponding equivalent standards apply to this report. 3. Dividends received may be classified either as cash flows from operating activities or cash flows from investing activities, depending on the accounting policy of the entity. 4. If this report has been authorised for release to the market by your board of directors, you can insert here: “By the board”. If it has been authorised for release to the market by a committee of your board of directors, you can insert here: “By the [ name of board committee – eg Audit and Risk Committee] ”. If it has been authorised for release to the market by a disclosure committee, you can insert here: “By the Disclosure Committee”. 5. If this report has been authorised for release to the market by your board of directors and you wish to hold yourself out as complying with recommendation 4.2 of the ASX Corporate Governance Council’s Corporate Governance Principles and Recommendations, the board should have received a declaration from its CEO and CFO that, in their opinion, the financial records of the entity have been properly maintained, that this report complies with the appropriate accounting standards and gives a true and fair view of the cash flows of the entity , and that their opinion has been formed on the basis of a sound system of risk management and internal control which is operating effectively.