Good day, and thank you for standing by. Welcome to the NanoXplore first quarter 2026 earnings conference call. At this time, all participants are in listen-only mode. After the speaker's presentation, there will be a question-and-answer session. To ask a question during the session, you will need to press star 11 on your telephone. You will then hear an automated message advising your hand is raised. To withdraw your question, please press star 11 again. Please be advised that today's conference is being recorded. I would now like to hand the conference over to your speaker today, Pierre-Yves Terrisse, Vice President of Corporate Development. Please go ahead. Bonjour à tous et bienvenue à la conférence téléphonique du premier trimestre 2026 de NanoXplore. Good morning, everyone, and thank you for joining this discussion of NanoXplore financial and operating results for the first quarter of fiscal 2026. The press release reporting these results was published yesterday after market close and can also be found on our website along with our financial statement and MD&A. These documents are also available on SEDAR+. Before we begin, I'd like to remind you that today's remark, including management's outlook and answers to questions, contains forward-looking statements. These forward-looking statements represent our expectation as of today, November 13, 2025, and accordingly are subject to change. Such statements are based on assumptions that may not materialize and are subject to risk and uncertainties. Actual results may differ materially, and listeners are cautioned not to place undue reliance on these forward-looking statements. A description of the risk factors that may affect future results is contained in NanoXplore annual information form available on our corporate website and in our filings with the Canadian Securities Administration on SEDAR+. On the call with me this morning, we have Soroush Nazarpour, CEO; Rocco Marinaccio, our COO and incoming CEO; and Pedro Azevedo, our CFO. After remarks from Soroush, Rocco, and Pedro, we'll open the call to questions from financial analysts. Let me turn the call over to Soroush. Thank you, PY. As many of you already know, we announced back in September that I would be transitioning the leadership role to Rocco. This transition marks the next chapter in NanoXplore's journey, one that builds on our strong foundation of innovation, operational excellence, and disciplined growth. This strategic transition is nearly complete and being done with NanoXplore's long-term growth and success firmly in mind. Over the past 15 years, I've had the privilege of founding and leading NanoXplore from a bold idea to the thriving company we are today. During this period, NanoXplore evolved from a small R&D venture into a publicly traded, vertically integrated materials company with around 400 employees, multiple production sites, and global partnerships. We became the world's largest graphene producer, commercialized graphene-enhanced products at an industrial scale, achieved around CAD 130 million in annual revenue, and established a strong foothold in both transportation and industrial markets. A pivotal moment in our recent success came in September when we announced our largest-ever graphene powder sales agreement with Chevron Phillips Chemical, a contract that's progressing very well. That brings me to the news I mentioned. After deep reflection and discussion with our board, I have decided that it was the right time for me to step aside from my day-to-day role as CEO and transition to Vice Chair of the Board. Effective December 4, 2025, I will focus my energies on a long-term strategic growth plan and closely work with current management to achieve our long-term objectives of organic growth and financial performance with a clear objective of creating shareholder value. I would like to extend my gratitude to the board, management, employees, and shareholders for all these years of dedicated collaborative work and support. I'm deeply proud of what we have achieved together and confident that NanoXplore is well-positioned for its next phase of growth. With that, I will turn it over to Rocco. Thank you, Soroush and PY, and good morning to everyone joining us on the call. As Soroush mentioned, effective December 4, 2025, I will officially assume the role of Chief Executive Officer. I greatly value the continuity and strategic insight that Soroush's continued involvement as Vice Chair of the Board will bring to this next chapter for the company. Our company is stronger than ever, supported by a robust commercial pipeline, a growing and diversified revenue base, a strong IP portfolio, industry-leading graphene manufacturing capabilities, and a culture of innovation and excellence that's ready to accelerate. As I take on this new role, I bring the same energy and dedication that I've applied over the past seven years as COO, driving scale-up efforts across North America and Europe. Since 2021, we've achieved significant operational efficiencies, improving gross margins by 11% percentage points while expanding our customer base. Looking ahead, my focus will remain on execution, innovation, and growth, continuing to strengthen our position as a global leader in graphene materials, particularly in applications such as drilling fluids, insulating foams, and plastics. As I step into the CEO role, my focus is clear: to build on our growing momentum, deliver sustained value for our shareholders, and continue pushing the boundaries of what is possible with graphene. Looking at the first quarter, our graphene-enhanced solutions business was again impacted by softness in the transportation sector, particularly from our two largest customers. However, we're beginning to see early signs of stabilization, and we expect demand to gradually recover during the second half of fiscal year 2026. On the positive side, we have started supplying Chevron Phillips Chemical, and all indicators point to significant growth opportunities as we work together to identify additional applications. In addition, yesterday we announced Club Car as a new customer, which we are supporting from our new facility in Statesville, North Carolina. This long-term contract is expected to generate approximately CAD 15 million in annualized revenues, and I'm pleased to report that production is already underway. This is a significant development for the company, clearly demonstrating our graphene-enabled differentiation translating into a major win. We look to build on this momentum as we pursue additional opportunities. We recently completed a CAD 25.7 million equity financing supported by new and existing shareholders, including a pro-rata investment from Martin Rea, our largest shareholder. This financing strengthens our balance sheet and provides us the ability to scale dry process graphene production, enabling us to pursue new and larger market opportunities. We remain on track to have our first fully commercial dry graphene module installed by March 2026, with initial revenues expected to begin by the end of our fiscal year 2026. This first module represents an important milestone for NanoXplore, adding between 500-1,000 tons per year of new capacity, depending on product grades. This positions us to meet growing customer demands in markets that were previously not addressable and further solidifies our leadership and high-quality, high-volume graphene production. Looking ahead to the full fiscal year, we anticipate two distinct phases of performance. In the first half, our graphene-enhanced solution business faced volume reductions from our two largest customers, leading to softer Q1 results than expected. However, we are encouraged by early signs of market stabilization and expect sequential improvement in Q2 as new customer programs ramp up and underlying demand begins to recover. As we move into the second half of the year, we expect growth to accelerate, driven by increased graphene powder sales, the ramp-up of production at our Statesville facility, and the recovery of volumes in our graphene-enhanced solutions business. Together, these catalysts position us for a strong finish to fiscal 2026 and set a solid foundation for sustained growth into fiscal 2027. In summary, while we experienced a temporary pause in growth over the past three quarters, we are entering a period of renewed momentum. We secured a major new customer in Chevron Phillips Chemical and are advancing additional opportunities within our highest-margin business segment. At the same time, we are ramping up production for Club Car at our new Statesville facility and making meaningful progress on our dry process graphene initiative. Overall, we expect both growth and profitability to be weighted toward the second half of the year. We are energized by our recent customer wins, which open new growth markets, and we remain focused on optimizing operations, building strong customer partnerships, and converting top-line progress into sustainable bottom-line performance. With that, I'll now turn the call over to Pedro to walk you through our financial performance. Merci beaucoup. Bonjour à tous. Good morning, everyone. Today, I will begin with a review of our Q1 financial results, followed by an update on financial aspects of our five-year plan, and conclude with some commentary on near-term CapEx spending and revenue guidance for fiscal year 2026. Before jumping into the details, I wanted to highlight that the contract with Chevron Phillips Chemical is very important financially for NanoXplore. Selling price is in line with the previously stated range for graphene powder, and as volume ramps up over the year and into future years, this contract will produce strong cash flows and drive higher margins and operating leverage. We have already received and delivered orders and expect growth to be strong but not yet easily predictable as Chevron Phillips Chemical is in its initial phase of product rollout and marketing strategy. Total revenues in Q1 were 30% lower than Q1 2023 at CAD 23.4 million. This decrease was mainly due to a reduction in demand from our two largest customers as volumes have slowed to historically low levels after strong demand last year. Our two largest customers, along with others in the medium-duty and heavy-duty transportation sector, have reported layoffs and cadence reductions due to the current economic environment. Adjusted gross margins, which exclude depreciation, as percentage of sales was 17.3%, a decrease versus 21% last year. This was mainly driven by lower manufacturing overhead cost absorption resulting from lower volumes, partly offset by a favorable product mix effect resulting from higher graphene powder sales. This lower adjusted gross margin broke a multi-year quarterly improvement streak, but we expect that this is a temporary situation with a resumption of the streak by the second half of the year. Adjusted EBITDA was a loss of CAD 1.4 million, a decrease of CAD 2.5 million versus last year, and was comprised of a loss of CAD 1.3 million in the advanced materials, plastics, and composite product segment, a decrease of CAD 2.8 million versus last year, and by a loss of CAD 71,000 in the battery cells and materials segment, an improvement of CAD 320,000 versus last year. Regarding our balance sheet and cash flows, we ended the quarter with CAD 10.1 million in cash and cash equivalent and CAD 7.7 million in short-term and long-term debt. Our cash, along with the unused space in our revolving credit lines, resulted in total liquidity of CAD 20.1 million at September 30. Our recent CAD 25.7 million equity financing close on October 30 is not included in these numbers. Operating cash flows were negative CAD 6.2 million, mainly from changes in working capital items and is typical in the first quarter. Cash flows from financing activities were positive CAD 1.4 million, resulting from equipment lease financing advances inflows of CAD 3.2 million and debt and lease repayments of CAD 1.6 million. Finally, cash flows from investing activities were negative CAD 3.7 million, mainly due to capital expenditure payments. At the end of September, the company had used a cumulative cash amount of CAD 7 million on capital expenditures for projects in progress that will be financed during Q2 with the RBC Credit Facility. Moving now to an update on financial aspects of our five-year strategic plan. With regard to the expansion of graphene-enhanced solutions capacity in Saint-Clotilde-de-Beauce, this expansion increased our capacity to produce parts for one customer by 50%. As a reminder, a large portion of this capacity expansion was paid by our customer. However, the capacity expansion currently remains underutilized due to reduced demand in the medium-duty transport sector. We expect capacity utilization to increase during the second half of our fiscal year 2026. Our U.S. expansion, which includes both graphene-enhanced SMC as well as additional capacity for the graphene-enhanced solutions business, was completed during the quarter. Start of production for Club Car began in early October in our new plant in Statesville, North Carolina. Including Club Car, we currently have an incremental CAD 40 million per year of awarded programs that will start production over the next 18 months. Turning now to our near-term CapEx spending and fiscal year 2026 guidance. CapEx spending during the quarter was as is expected. We spent CAD 3.7 million and expect to spend another CAD 4 million in each of the next two quarters as we complete the spending on graphene-enhanced SMC initiative and the first module of the dry process grade graphene line. As previously mentioned, this will be financed through our RBC Credit Facility. Regarding our fiscal year 2026 guidance, the economic environment remains unclear and forecasts from customers in the transportation sector remain volatile. While forecasts from our two largest customers indicate volume growth in the second half of our fiscal year, these could be delayed to later in 2026 as we experienced last year. New business starting in Q2 will partially offset the current volume reductions, but growth rate and order frequency from these customers are not yet established. We believe Q1 revenues will be the trough of the fiscal year with potential quarterly revenue growth thereafter. As such, and based on the visibility we have today, we are cautious in our expectations and guide to full-year revenues between CAD 115 million and CAD 125 million. PY. Thank you, Pedro. Operator, we can now open the lines for questions. Thank you. As a reminder to ask a question, please press star 11 on your telephone and wait for your name to be announced. To withdraw your question, please press star 11 again. Please stand by while we compile the Q&A roster. Our first question comes from the line of Amr Ezzat with Ventum Capital Markets. Your line is now open. Good morning. Thanks for taking my question. Good morning, Amr. Now that we're more than a month into the CP Chem deliveries, can you walk us through whether early volumes are tracking to the commercialization curve you and CP Chem envisioned? In the same vein, I'm wondering if you have any operational feedback from the first batch of wells that informs your scaling plan. Sure. Good question, Amr. We are a month into the contract. We signed it late September, started October 1. How we are tracking to initial projections, I will tell you, we are tracking higher than what we believed we would be. The rollout has been quicker than anticipated, which is obviously positive. Feedback from customers that have trialed the material has all been positive, in line with expectations as to what the customer can expect. Again, all the feedback that we have received so far, positive. Marketing from CP Chem is starting early December, so they have not even started officially marketing the product, and that will occur in December. We expect demand to continue to increase and in line with expectations. Okay. That's great news. How is it that demand is tracking ahead of expectations if they're not marketing the product then? Can you help us understand, is that contract structured in a way that allows accelerated volume pull forward if CP Chem wants to move harder on their own commercialization, or is it a ramp that's strictly linear? Yeah. How are they achieving greater than expected volumes? Word of mouth. When the initial trials were done with NanoSlide, they were done in the most stringent areas in the U.S. The oil drilling community understood the results, and that is how the demand has increased pretty quickly. It is not uncommon in the industry for competitors to purchase competitor material and label it themselves. That is underway as well. Competitors are trialing products, and if they feel a need, they are more than able to purchase the product and label it as their own. We see early signs of that occurring as well. Fantastic. Maybe one on the guidance. The revenue range that you guys gave, at least if I use the midpoint, implies an average of CAD 32 million per quarter over the next three quarters. I'm assuming, like you guys are saying, Q2 is a bit of a recovery, but H2 is stronger. I'm wondering if you could unpack the building blocks here. How much of that sort of jump to an average of CAD 32 million a quarter versus the 20ish you guys reported is uplift driven by powder versus composites versus recovery, I guess, from your two largest customers? If I can answer that, the average is correct. That is the average for the rest of the three quarters. As we said, it will be a ramp-up. You should expect Q2 to build on Q1 and then Q3 and Q4 to build on each previous quarter. I think you can ramp it up that way to get to that 120, let's say, midpoint. Most of that revenue growth is going to come from the recovery from the volumes from the two largest customers. We expect some recovery. We just don't know to what extent, which is why the range is somewhat wide right now. The growth of CP Chem will come, but the values that we're talking about are not going to be so material to be influencing that much the guidance. They're going to be there. They're going to be important, and they're going to contribute more to the bottom line. In terms of top line, the majority of that is going to be from the addition of Club Car, from the recovery of the sales, the volumes to the two largest customers. Okay. That's very clear. On the Club Car, how quickly do you expect that to scale towards steady state? I just want a point of clarification. Is this additive to the CAD 40 million composites target that you guys spoke to in the last conference call? You guys said in the next few years, you've got a few programs that sort of ramp you to CAD 40 million. I'm assuming that CAD 15 million is included in that CAD 40 million that you guys spoke to because you guys were already speaking about a new customer that you guys haven't announced or hadn't announced. Yeah. Amr is correct. The CAD 15 million is inclusive of the CAD 40 million. It is not incremental to. We announced in the release yesterday that this was takeover work. It is not traditional business that you win and it launches in two years. We essentially, early October, we launched, and the ramp-up went from 25% of the volume to 100% within the week. There has been a ramp. We are already at full volume, I will tell you that. The ramp has been quick, and we are very excited. I mean, if you look at the volume of golf carts produced, everything coming out of Evans, Georgia, we are supplying every single one of them. It is great business for us. Fantastic. Congrats. I'll pass the line. Thank you. Our next question comes from the line of James McGargle with RBC. Your line is now open. Thanks for having me on. I just wanted to follow up on that question on the revenue guidance. You mentioned in the press release the guidance is based on your customer's near-term forecast. Can you just kind of share what those forecasts are a little bit more specifically? A quick follow-up. Is the new module, is that in guidance, or would that be upside to your guidance for fiscal 2026? Good morning, James. To your first question, the volume is based on what we see from our customers without the expectation of significant recovery of volumes. It is based on what we believe is a more appropriate forecasting for the rest of the year of growth from these two main customers. It can be upsized, which is why the 125 could be on the upper end. It could even be exceeded, but we're not ready to guide that, and we're guiding the 115-125. When it comes to Club Car, the business is there. As Rocco just explained, the business has hit its normal rate for the rest of the fiscal year. There is a seasonality to it. We know that it's going to be a little bit higher over the next two quarters, our fiscal quarters, and then kind of dip down a little bit after that. We can predict those kinds of volumes to some extent. Finally, your question on dry processed graphene. Right now, we expect dry processed graphene to start generating some sales in the fourth quarter before the year-end, as we've talked about. The volumes that we would expect to sell at first are going to be fairly small. They're not going to be material to the sales levels, but they're going to be important as a stepstone, as a milestone for the company to start generating those revenues. You could argue that they're not included in our numbers, so they could be upside, but they would not be material to influence 125-128 or 130 or something like that. To be honest, it is possible that it'll contribute to the guidance that I provided. In terms of the margin recovery, I guess two things. One, you mentioned the gross margin streak, the improvement should resume in the back half. I guess the first part of my question is, does that mean Q2 margins should be lower versus Q1? In Q3 and Q4, as volume starts to recover, top line starts to recover, should we start anticipating margins more closely in line with last year, or do you still expect margins to be down year over year, but just improving quarter over quarter? Yeah. The answer is that the growth into next quarter will be better than what we have. The 17.5% that we had this quarter was really because of the volume levels. In your initial report, you kind of commented that they were down versus expectations, but it really was mainly driven by the volume and nothing else. The recovery that is going to happen in Q2, it will start growing back, and the streak will resume, but only in the second half because my comment on the streak is that it relates to last year's Q1, or in this case, last year's Q2. We expect Q2 to be a little bit lower than the Q2 of last year or very close to it. In Q3, resume that year-over-year quarterly improvement in margins. I don't know if that's clear, but we expect by the end of the year to be upwards of 24% again and resume that streak into fiscal year 2027, growing into the 25%-26% and such as the proportion of graphene powder sales increases. That makes a lot of sense. I appreciate the time, and I'll turn the line over. Thank you. Yeah. Thanks, James. Our next question comes from the line of Melissa Dean with National Bank Capital Markets. Your line is now open. Hi everyone. Thanks for taking my questions. Could you provide some clarity on the CapEx expectations for the graphene and anode material initiative, and namely on the dry graphene side of things? Is it the entire CAD 25 million of equity financing that you issued? If you can kind of give us an estimated capital layout timeline, if possible. Yeah. You have a few questions in there. First, the expectation for the next two quarters is that we're going to focus on completing our graphene-enhanced solutions investments, which is the investments in our Statesville site and SMC materials in the Bose plant. That is going to be the majority of the amounts in Q2 and Q3 as we finish those initiatives. That represents, give or take, CAD 3 million or so out of the CAD 4 million in each of the next two quarters. The extra amount to get to CAD 4 million represents the dry process graphene, the first module line that we are putting in. We're about halfway in terms of costs, maybe a little bit less than halfway. We will complete that by the end of the third quarter. That represents the CAD 4 million and CAD 4 million that I mentioned. After that, we plan to grow the CapEx mainly on the dry process graphene expansion, and that will be dictated by the demand that we see from our customers and the acceptance into the market of this new grade of product. Each module will be about CAD 2 million, and each of these modules, as Rocco mentioned, is somewhere between 500 and 1,000 tons. Depending on the growth, we will be putting in the second and third and potentially fourth line over time. The time will be dictated by the demand, but the growth of that capacity will really be on a modular basis, and that's important for you to know. The last question you were asking, the CAD 25 million cash that we received from equity is going to be partially to support that growth. We earmarked about CAD 20 million out of the CAD 25 million that would be going into these modules. Now, that's going to be over time. I can't say whether it's 18 months, 2 years, 3 years, but that's how we expected the equity financing to support that growth. Perfect. Understood. With that, how is the testing and traction with this new dry process graphene going with customers and testing partners? Is it better than you expected or in line with expectations? I'll take that question. The dry process really addresses markets that were not addressable to us previously, or we didn't believe they were. Testing has been, I would say, very good in markets where previously were not achievable, if you will. New grades of product address key markets, foams, for example. I'll say that testing is in advanced stages with a lot of customers, and I would say it's extremely positive right now. That's great to hear. Just switching gears, can you give us an update on the insulation foam customer and the advancements you're making there? I saw you mentioned it in your press release, and you've previously noted this opportunity could be larger than the drilling solutions one, noting a minimum of CAD 15 million per year in sales potential. Yeah, just an update on that opportunity and if you're still maintaining those expectations. I do not know exactly what you are referring to in terms of that it could be bigger. We can certainly go back and review what we have said previously. I will say that we are working with multiple customers in this space, big names, I will tell you that. Disclosing who they are, we are not ready to do that yet. We have multiple customers in various stages, some further along, some in advance. It is a big, big market. If I may, I think what you're referring to, just to help the conversation along, is I think you're talking about the addressable market is larger than what we think could be for drilling fluids. That is actually correct. The dry process graphene, as Rocco explained, addresses a market today that we can't really access. The performance of the wet process does not deliver the expectations to the level that the customer wants, but the dry process graphene is showing early signs that it does. That's where we see a lot of possibilities down the road that could be, yes, indeed, larger than the drilling fluids side, which we think is already going to be pretty big. The CAD 15 million that you mentioned, the only CAD 15 million that we remember talking about, either myself or Rocco, is really the side related to the Club Car business. That's the only CAD 15 million that we recall talking about. Okay. When could we see this opportunity presenting itself in your results if you're able to kind of give any outlook there? Yeah. As indicated, once the line is up and running in March of 2026, by the end of that fiscal year, so let's say June, July timeframe, we'll start initial revenues, right? You'll see them in fiscal year 2027. Timing of that is still yet to be determined. Okay. Perfect. I'll leave it there. Thank you. Thank you. Our next question comes from the line of Marvin Wolff with Paradigm Capital. Your line is now open. Yes. Good morning. Congratulations on the Club Car mandate. I'm wondering, with this win, is there any other potential recreational applications that are coming to your door, things like ATVs, other types of sports recreational equipment? Good question. Thanks, Marv. Yeah. I mean, our team is working with many different potential customers, right? The key with Club Car, I've seen even with our current customers in PACCAR, they've seen the benefits of graphene-enhanced materials, and they've tested it. They've adopted it, right? As we get our products into the market, it becomes much more commercial in the sense where there's more lineups of customers that want to try and understand the benefits as well. We are in talks with multiple customers in different segments. We felt it was very important to diversify from just strictly transportation for obvious reasons. I think with the Club Car win, we did that, right? That's just a stepping stone into potential future business. Now, can you speak to, in rough terms, are we talking about the front clip, or are we talking about the rear clip that covers the motor and all that kind of stuff? Or is it a big belly pan? We do front and rear underbody. So essentially, the backside where you put your golf clubs and the whole front side where you put your feet and the pedals and all that. We're doing both, the whole thing. Okay. That's great. I'm sure we're all golfers to some extent, so we all understand the product. There you go. Indeed. So anyone may. Thanks a lot. Is our product on there? Thanks a lot. That's super. Thanks. Thanks, Marv. I'm currently showing no further questions at this time. I'd like to hand the call back over to Pierre-Yves Terrisse for closing remarks. Okay. Thank you, everyone, for participating on this call, and we wish you all a very good day. This concludes today's conference. Thank you for your participation. You may now disconnect.