Good afternoon, and welcome to the Alcoa Corporation Q2 2021 earnings Presentation and Conference Call. I would now like to turn the conference over to James Dwyer, Vice President of Investor Relations. Please go ahead. Thank you, good day, everyone. I'm joined today by Roy Harvey, Alcoa Corporation President and Chief Executive Officer, and William Oplinger, Executive Vice President and Chief Financial Officer. We will take your questions after comments by Roy and Bill. As a reminder, today's discussion will contain forward-looking statements relating to future events and expectations that are subject to various assumptions and caveats. Factors that may cause the company's actual results to differ materially from these statements are included in today's presentation and in our SEC filings. In addition, we have included some non-GAAP financial measures in this presentation. Reconciliations to the most directly comparable GAAP financial measures can be found in the appendix to today's presentation. Any reference in our discussion today to EBITDA means adjusted EBITDA. Finally, as previously announced, the earnings release and slide presentation are available on our website. With that, here's Roy. Thank you, Jim, and thank you to everyone for joining our call. Before we get started, I want to take a moment and emphasize once again that Alcoa's actions are always guided by our values. We consistently act with integrity, operate with excellence, and care for people. That is true every quarter, but it's been especially important in this past one and a half years as the world has wrestled with unprecedented challenges brought on by the COVID-19 pandemic. While risks remain, vaccines have helped to move many of the world's economies forward again. I'm proud of the work that our Alcoa employees, following our values, have done to mitigate these risks, supporting each other, our business, and our communities. I am disappointed, however, that we had two serious injuries during the quarter, a hand injury and a case of heat stress. These are both important reminders that there are numerous everyday risks that we must consistently work to eliminate or reduce. Our most important objective is the safety of our employees. Now, let me quickly recap some of our results, which Bill will describe in greater detail. We posted our highest-ever quarterly earnings per share since becoming an independent company in 2016. It's also our most profitable H1 of the year in the aluminum segment. The results demonstrate that our strategic priorities are working to improve this company and deliver results. It's a very good time to be in the upstream aluminum business, and it's a good time for Alcoa, with a company that is stronger now than any time since our 2016 launch. We've made significant progress on our strategy to strengthen our balance sheet, eliminating all long-term debt maturities until 2026. Importantly, we are now well within our target range of proportional adjusted net debt. We also delivered above and beyond our previously announced target to generate cash from non-core asset sales. Although we have reached our target on this program, we will continue to evaluate other sales when it makes sense. Last month's sale of the former East alco smelter site in Maryland, which had been closed since 2010, was an example of this. The new owner will use the property for a next-generation data center. This, too, is an example of our strategic priorities working. It shows that former brownfield sites can bring economic value for our company and the communities where we used to operate. Across Alcoa, we've worked to ensure this company can succeed through all commodity cycles. When market prices plummeted last year, we were resilient because of the strategies we already had in place. Our plants remained operational and performed well. We stayed focused on the future, continuing to make improvements. Now, with stronger markets, we're capturing the benefits from much better pricing and driving it to the bottom line. While we will continue to improve our portfolio of assets, our aluminum segment saw our company's highest-ever third-party realized price. Also, ongoing strength in customer demand and China's efforts to reform its industry suggests continued strength in global aluminum pricing. The metal we produce is an important material for the future and more sustainable solutions. We're ready for that future through existing low-carbon products and the development of breakthrough technologies that we're working to bring to the market. I look forward to discussing this and more, but now I'll ask Bill to dig deeper into our financial results. Bill, please go ahead. Thanks, Roy. It was another great quarter. Revenues at $2.8 billion were steady sequentially and after removing the impact of the Warrick Rolling Mill sale, we're up 7%. Revenues were up $685 million or 32% from the same period last year on higher aluminum prices. Q2 earnings per share was $1.63 per share, $0.70 per share higher than the prior quarter and $2.69 per share higher than the year ago quarter. Adjusted earnings per share for the Q2 nearly doubled sequentially to a record $1.49 per share. Adjusted EBITDA excluding special items also increased up 19% sequentially to $618 million and more than triple last year's $185 million. A key reason for our record net income this year and a key differentiator from prior years has been the relative contribution of our Aluminum segment. With modest income taxes and virtually no minority interest, more Aluminum segment EBITDA translates to the bottom line compared to the other segments. In the H1 of 2021, the segment provided 65% of Alcoa's total adjusted EBITDA, excluding special items, compared to 28% of the total in our previous best H1 2018. Even though Alcoa's adjusted EBITDA was $376 million lower than the H1 of 2021 compared to the same period in 2018, Alcoa's H1 2021 net income, excluding special items, was $20 million higher than 2018. A similar dynamic also holds true for cash flows. Now let's review adjusted EBITDA in more detail. The $97 million increase in adjusted EBITDA, excluding special items, was driven by higher metal prices. That $199 million benefit was partially offset by lower alumina prices and unfavorable foreign currency impacts, which together totaled $41 million. Higher production, energy, and raw material costs were unfavorable impacts, partially offset by better mix of alumina contracts and higher value-added shipments and premiums. At the product segment level, Bauxite adjusted EBITDA declined to $18 million due to lower intercompany transfer prices and higher production costs. In Alumina, $22 per ton lower API and higher maintenance and energy costs were only partially offset by improved mix of shipments and contract pricing. The Aluminum segment benefited from much higher LME and higher regional premiums, especially the Midwest premium, as well as stronger value-added shipments and pricing, while higher production costs, non-recurrence of Warrick Rolling Mill EBITDA, and higher raw materials and energy costs were partial offsets. Let's look at impacts in our cash flows. The cash flows highlight many of the major corporate actions we've undertaken this year, as well as the benefits from very strong adjusted EBITDA. Given the magnitude of the cash balance change, in addition to our normal year-to-date chart, we have bridged from the Q1 ending cash balance to the Q2 cash balance. It shows the April cash uses of calling the 2024 bonds and funding the US pension, as well as the quarter benefiting from cash inflows related to non-core asset sales proceeds, predominantly the former East Alcoa smelter location. It also shows the benefit of strong adjusted EBITDA, particularly in the Aluminum segment, net of other operating uses, which included a modest use of working capital, primarily due to higher metal prices. On a year-to-date basis, you can see the additional benefit of the strong Q1 EBITDA and the partial offset from the typical Q1 working capital change. Those cash flows and EBITDAs also impact key financial metrics. Return on equity increased from 18.5% in the Q1 to 24.6% for the H1 of 2021, reflecting the record adjusted net income attributable to Alcoa. H1 2021 free cash flow, less net non-controlling interest distributions was negative $371 million, reflecting the strong EBITDA, partially offset by the $500 million pension funding and the working capital increase. Days working capital increased one day sequentially on higher receivable and inventory valuations. Most importantly, our key leverage metric, proportional adjusted net debt, is now well within our $2 billion-$2.5 billion target range at $2.1 billion. Our pension and OPEB net liability has decreased $1.7 billion, or 55%, from the 2016 year-end balance of $3.1 billion to $1.4 billion. Liquidity is very good. Our cash balance was $1.65 billion at quarter end. Moving to our outlook for the remainder of the year. Our outlook for the full year 2021 is improving slightly in several areas. Shipments, the expected ranges are increasing 100,000 tons in both the Bauxite and Alumina segments, and increasing 200,000 tons in the Aluminum segment. On the income statement, transformation costs are improving $5 million. In cash flows, there are 2 expected improvements. Pension and OPEB cash funding is expected to be $5 million better, and environmental and ARO spending is expected to be $10 million better than the last time we showed this chart. More importantly, we expect the Q3 to be another very solid quarter. Operations are expected to continue performing at a high level. Current aluminum prices are significantly higher, and alumina prices are higher too compared to the Q2. We will see some partial offsets to these benefits as we are seeing cost inflation in the form of higher raw material costs, energy, and transportation costs. Finally, with current market prices indicative of another quarter of substantial earnings, we expect our operational tax expense to be over $100 million in the Q3. Now, let me turn it back to Roy. Thanks, Bill. Now turning to our markets. As Bill noted, the Aluminum Segment has a significant role in our profitability, and we saw a continued upward trend in realized pricing last quarter. It grew more than 60% since the low in the Q2 of 2020. Broad economic recovery, manufacturing restarts, and tightness in the physical availability of aluminum have all continued to support this rally in the LME and regional premiums. We have observed strong macroeconomic trends, including positive GDP and industrial production in many of the world's leading economies. Monetary and fiscal stimulus programs, both announced and implemented, have supported stronger demand in aluminum's end-use markets. That is expected to continue as vaccination efforts advance, lockdowns are eased, and stimulus measures progress. In addition, as noted last quarter, we continue to see China moving to constrain supply growth in energy-intensive industries, like aluminum, to help meet its own goals to reduce carbon emissions. For Alcoa's commercial impacts specifically, in aluminum, we are also seeing significant year-over-year growth for value-add products. In the Q2, we saw increases in both sales and shipments. The Q2 was the fourth consecutive sequential improvement in shipments, up 11% for the quarter and 40% year-over-year. For full year 2021, we expect continued year-over-year growth in value-add product sales revenue. Now, let me return to the topic of China for a deeper look, as it continues to play a predominant role in global aluminum industry fundamentals. The country is continuing to focus on energy-intensive industries to assist with its decarbonization goals. In its announced 14th Five-Year Plan, which ends in 2025, the government set its highest priority goals, including work to reduce carbon emissions by 18% per unit of GDP and to reduce energy consumption per unit GDP by 13.5%. The Chinese central government has set dual control targets for each province on energy intensity per unit of GDP and total energy consumption. On the left, you'll see a summary of the publicly disclosed first-quarter outcomes for this dual control system for China's 17 aluminum-producing provinces. The colors correspond to a traffic light approach that the government has deployed and as described on the chart. Results from this snapshot show that provinces that produce close to 65% of China's primary aluminum have been rated yellow or red for at least one of the two targets. China's central government has called on provinces not meeting targets to tighten energy efficiency controls. In response, some provinces are limiting new projects in energy-intensive industries, such as primary aluminum smelting. Inner Mongolia has already curtailed primary aluminum production in response to this program and other factors. This is on top of other developments we are seeing where Chinese provinces are taking action to limit primary smelting growth as part of their own policy priorities. For example, Shandong Province, home to around 20% of Chinese aluminum capacity, recently announced its intention to strictly enforce implementation of the reduction principle, which would apply a two-thirds scaling factor to inter-provincial capacity transfers. To give an example, this would mean that for a smelter in Shandong to expand capacity by 100,000 metric tons per annum, it would require a purchase or transfer of 150,000 metric tons per annum of capacity permits. Finally, in Gansu this year, we have noted that the province canceled preferential power tariffs for primary aluminum smelters. In addition, the Chinese government also has started the 1st phase of a National Emissions Trading Scheme, with the aluminum industry expected to be included in subsequent phases with other industries. China is also continuing to work towards its announced limit of carbon and energy-intensive primary aluminum capacity of 45 million tons per annum, a target announced in 2017 as part of supply-side reform policies. Considering all of the ongoing efforts in China, the country is expected to remain a net importer of primary aluminum, with the potential for new capacity to be needed outside of China in the future. Clearly, Chinese policies on carbon emissions reduction and energy have the potential to drive significant positive change in global aluminum industry fundamentals. Next, I want to highlight the fact that our 3 segments continue to perform well, allowing us to capture the benefits from the positive market fundamentals we're currently experiencing. We have remained focused on strengthening our operations through improved processes and reliability to ensure that we continue to operate with stability. In bauxite, we're continuing to boost our production from majority-owned mines and seeing higher tons from joint venture mines. In Western Australia, we reached a major milestone earlier this year for our Willowdale mine, relocating the hub to a new region known as Larego. Transferring to this new region included a highly engineered process that involved moving an 850-ton crusher. It was an impressive project, and I congratulate the team for a safe and successful move to this new region, which will be used for the next couple of decades. In alumina, we're maintaining production at near record levels for the world's most cost-competitive refinery system. We've continued to improve our processes to reduce bottlenecks and operate efficiently. In aluminum, we're benefiting from the restart of the ABI smelter in Bécancour, Quebec, that was fully completed last year, albeit partially offset by the Intalco curtailment. Let's turn to some of our achievements in the H1 of the year. First, as mentioned earlier, we overachieved on our goal relating to the sale of non-core assets while continuing to evaluate future opportunities. We also made progress this year in our portfolio review, which includes opportunities for significant improvement, curtailments, closures, or divestitures. Earlier this year, we were pleased to announce the repowering of our Portland aluminum smelter in Australia. From a financial standpoint, as we noted, our balance sheet is in the best shape since our launch as a standalone company due to the actions we've taken. Today, we have more flexibility to execute on Alcoa's strategies. From a sustainability perspective, we are well-positioned in an evolving marketplace that is placing greater emphasis on low-carbon products. In June, we shipped the first commercial loads of EcoSource, the world's first and only low-carbon smelter-grade alumina brand. This particular product, which is part of our Sustana family, leverages our leadership as the world's largest third-party provider of alumina with a refining system that has the globe's lowest average carbon dioxide intensity. While we have a strong position currently in our industry with the most comprehensive line of low-carbon products, we're also leading in the development of next-generation technologies. We developed a zero-carbon smelting process that helped create the technology basis for our ELYSIS joint venture. The technology eliminates all direct greenhouse gas emissions from the traditional smelting process, producing instead pure oxygen. Metal produced from this ongoing R&D project has already been used in commercial products, including from the deal we announced earlier this year to supply metal for the wheels used on Audi's e-tron GT, the company's first electric sports car. The ELYSIS joint venture is now ramping up the technology and began construction last month on commercial-sized inert anode cells in Quebec, which will complement the ongoing work at Alcoa's technical center near Pittsburgh and at the ELYSIS Research and Development Center in Quebec. We announced in May that we're investigating the application of a technology known as mechanical vapor recompression, which has the potential to reduce a refinery's carbon footprint by approximately 70%. It would use renewable energy to capture waste heat and produce high-pressure steam, which would then be used to provide a refinery's process heat, displacing the use of natural gas. The Australian Renewable Energy Agency has provided funding for testing. If successful, by the end of 2023, Alcoa of Australia would install a mechanical vapor recompression module at the Wagerup Refinery to test the technology at scale. Now turning to the right-hand side of the slide. We will continue to progress in the H2 of the year. We're continuing to pursue a solution for our San Ciprián smelter in Spain, including working with the workers' representatives and government stakeholders on a sales process for that asset. In the state of Texas, we continue to work on the sale of the former Rockdale site known as Sandow Lakes Ranch. The real estate listing includes more than 30,000 acres with significant water rights. From a financial perspective, we are focusing on capital allocation in light of the improvements we've made to our balance sheet and the evolution of our product markets. We will remain committed to executing on our advance sustainably priority through our continued development of breakthrough technologies and a focus on growing sales from our Sustana line, which will help our customers lower their carbon footprint. We will continue to improve our business by executing on our consolidated capital expenditure budget for 2021 that includes both sustaining and return-seeking projects. Next month, we intend to begin construction on one of the sustaining capital projects at our Fosses Jacaldes refinery, where we will implement technology we first adapted in Western Australia. Known as residue press filtration, it saves water and reduces the use of land required to store residue. From a return-seeking perspective, we are also working on a project at our Deschambault smelter in Quebec, boosting amperage to enable lower costs and increase the smelter's annual production capacity by approximately 10%. The project is expected to be commissioned by the end of the year. Before we close our formal remarks, I want to emphasize again the significant progress we have made, not only since the inception of our company, but the accelerated progress during these last several months. Our facilities are consistently operating well, capturing the benefits of this much-improved market. We demonstrated resilience through the challenges of 2020, and we have the operational know-how, structure, processes, and systems to succeed. With a significantly improved balance sheet, our company is positioned well for the future, yet we will continue to push to perform even better. Relentless and continuous improvement is the Alcoa way. Finally, we are proud to be a values-based company with leadership in environmental, social, and governance practices, and we will continue to lead with breakthrough technologies, processes, and products for a more sustainable future. Thank you once again for your time today. Bill and I are now ready to take your questions. Thank you. We will now begin the Q&A session. When called upon, please limit yourself to two questions. Our first question today will come from Michael Glick with JP Morgan. Please go ahead. Good evening. Michael? Hi, Michael. Capital allocation's obviously top of mind for most of your investors and yourselves included. Can you talk about how you're thinking about shareholder returns or growth now that you're in your targeted proportional net debt range? Yeah, Michael, let me take that one. Before I do, I wanted to clarify a mistake I had in my prepared remarks. We actually said that, I think I said in my prepared remarks that bauxite outlook had increased by 100,000 tons. If you look at the chart, it's increased by 1 million metric tons, which makes a lot more sense than 100,000. Let's get that out of the way. Let me address your capital allocation question. As you know, we have a four-pronged approach to capital allocation. We have a net debt target, which for the 1st time we are in that target range after the Q2. One of the prongs is returns to shareholders. Third is the strategic review or repositioning of the asset portfolio, and the fourthth is earnings growth opportunities. We continue to follow that capital allocation model. We're happy to be in our target net debt range at this point. I think over the last five years, you've seen that we're very disciplined about how we allocate capital. We are continuing to follow that model at this point. Got it. Just given the move in billet premiums and some of the other value-added products, maybe it's simply demand, but what else do you think is driving that? Do you have a view on prices? Could you remind us how pricing for value-added products flows through in terms of your contracts? Yes. In the backup of the presentation, there's some information, I believe, on how metal price flows through and how regional premiums flow through. As far as the value-add premiums flow through, the large majority of North American value-add products are done on an annual pricing basis. In Europe, we price more on a quarterly basis. You will see the billet prices flow through on a quarterly lag generally. In North America, much of that is already priced for the year. Going into 2022, we would be having those negotiations now with our customers for value-add products. Obviously, if we're able to pick up spot business from time to time, as you've seen, we've picked up spot business this year because our value-add products volumes have been growing. We've been able to sell more spot market business, but the pricing is largely, at least in North America, on an annual basis. Just to complement that a little bit, Michael, the fact is right now with demand picking up so much in the US and North America and also in Europe, what we're seeing is that spot premiums, particularly on billet, but also on other products, are going up. In Europe, we can pick that up quicker, like William was saying, in North America, as we get into the next year's contracting season, we'll have the opportunity to pick up those spot premiums as well. Certainly a good time to be selling value-added products right now. Understood. Thank you. Michael. Our next question will come from Curt Woodworth with Credit Suisse. Please go ahead. Yeah, thanks. Good afternoon, Roy and Bill. Hey, Curt. First question, I just wanted to get your sort of initial take on the EU carbon border tax framework that was announced, and how you see that affecting the market, I guess, broadly, and then you specifically. Also kind of in parallel with that, I think previously you've talked about incentive pricing for new smelters around $2,600 a metric ton. When you look at the amount of capital that's going to need to be spent globally to address the carbon issue, and I know that there's some significant capital that potentially could occur for you in the refinery system on the compressors. How do you see this kind of baking into longer-term normalized pricing, is my first question? Sure. Let me comment on the EU carbon border tax, and then I'll let Bill talk a little bit about incentive pricing. Obviously we just started to look through the details. To start at the very beginning, from our perspective, because of the portfolio that Alcoa operates and the fact that we are low carbon compared with much of the industry, the quicker we can go to a global carbon price embedded inside of the aluminum price, the better off we can be. As we look at around the world regionally and we think about the development of these types of mechanisms, on the whole, they're going to be positive for Alcoa. Now, when you start to look at something like the Carbon Border Adjustment Mechanism, there's a lot of details that we need to sort through to really be able to understand what are the gives and takes. However, it is a step absolutely in the right direction. It's going to help to establish the fact that there is a true difference between what is low carbon aluminum and higher carbon aluminum. To me, that is a very positive step forward. Curt, if I address the incentive pricing question, let me come at it from a slightly different perspective. We think that the Chinese are pretty well committed to the cap that they have set in the future. If you then consider incentive pricing outside of China, there's really two areas that you could consider. The first is restarts. At today's pricing, I would think that a lot of producers are running the numbers around restarts and trying to make a determination whether the restart makes sense for them. On top of that, there's greenfields. You've seen in the rest of the world, very few greenfield announcements for smelting projects, and they take a while to come online. At this point, if anyone's considering greenfields, it's probably a couple of years down the road. Okay, that's helpful. I'll try to take another stab at the capital allocation question. Maybe start with the fact that you've only spent, I think, $10 million on growth CapEx year to date. Clearly there's scope for the company to accelerate more gross spend ahead. Given the free cash flow outlook, it seems like you're going to have plenty of wherewithal to do both. In terms of capital returns specifically to shareholders, should we think that a decent perecent of your free cash flow will start to accrue back to the shareholder? Is there any way you could quantify or help frame the opportunity set for the investor around that? Because there's a lot of investors that have been patiently sort of waiting for the net debt target to be hit, and obviously the recovery in the aluminum fundamentals creates a pretty good opportunity here. Thanks. Yeah. I'll just touch upon a couple of the facts that you brought up. First of all, we had a great cash generation quarter. We contributed the $500 million to the US pensions. If you back that out of cash from ops, our cash from ops was over $400 million after you back that out. We are in a position in this part of the cycle where we are generating significant cash flow. I'll come back, though, to the current capital allocation model. There's four prongs. We will weigh those four prongs to maximize value. I'm not going to speculate at this point how that occurs over the next few quarters. As you alluded to, we do have earnings growth opportunities. We've only spent $10 million of return-seeking capital. We're going to ramp that up to $40 million additional by the end of the year because we're at a $50 million target, as you see in the outlook. Not significant return-seeking capital growth at this point. We'll use the current capital allocation model to determine how we allocate capital going forward. Great. Thanks very much. Congrats on the quarter. Thank you. Thank you, Curt. Our next question will come from Lucas Pipes with B. Riley Securities. Please go ahead. Yes. Thanks very much, good afternoon, everybody. I'd like to add my congrats on a good quarter, good outlook, and also hitting your net debt targets. Thanks, Lucas. Thanks, Lucas. I want to return to this question as well, and I wonder, is there a way to quantify the potential capital outlay for transformation of the portfolio, investing in value-creating growth opportunities? Are we talking tens of millions of dollars, hundreds of millions of dollars over the next 12 months? I think that would really help investors kind of set their expectations for that last remaining item of the four-prong strategy, the return to shareholders. Thank you. The return-seeking capital budget for the year is $50 million. We've spent $10 million year to date. We'll spend an additional $40 million during the course of this year. We have purposely not put a size around how much it's going to cost us to reposition the portfolio. The reason why we haven't done that is because we essentially have to treat each plant on a case-by-case basis. Greatest example is Portland. Had we put a number out that said we need to close or curtail Portland back when we announced the strategic repositioning, we would've fundamentally been wrong. We were able to repower Portland, and it didn't cost us anything to repower Portland. Now Portland's going forward with a five-year power deal that should position it to be successful over that time period. We're trying not to give a view of how much it will cost to reposition the portfolio because it will depend on how we do that. That's helpful. Thank you. Maybe on the transformation. We've had this discussion today in terms of capital outlays, but this could be a source of capital too. I'm thinking of Rockdale, for example. Can you speak to that and how that might fit into this framework? Thanks for bringing it up, Lucas. Many people tend to think of our legacy portfolio as only cash outflows. We currently manage about 20 closed or curtailed sites around the world. We think of them in a number of ways. One, we need to be good stewards of the environment. For those closed and curtailed sites, we have to manage them in a sustainable way for the communities and the environment around them. Secondly, we look to minimize the liabilities and maximize the value. East Alcoa is the best example. East Alcoa is a site that we closed a number of years ago. We had been looking for opportunities to redevelop the East Alcoa. One came along where we were able to work with Quantum Loophole to put a redevelopment plan in place. They bought the site for $100 million. We'll move on from there. Rockdale is another great example where we have it for sale for $250 million. We have a group that works to maximize the value of those transformation sites around the world. Lucas, if I can just complement that. I think one of the reasons I most enjoy working for Alcoa is that we manage those sites all the way from inception down to closure and then redevelopment. We have a very talented team that is focused on these legacy sites, and you can see that very much again in East Alcoa. Just a great opportunity to demonstrate that this entire life of an operation can have value for Alcoa, but also for our communities. That's very helpful. Thank you. I'll follow up on one other point. The $150 million available of the existing $200 million buyback, how should investors think about that in today's environment? Thank you very much. I would just point you back to the capital allocation program. It's part of the four-pronged capital allocation program that we have. Thanks, Lucas Pipes. Our next question will come from Emily Chieng with Goldman Sachs. Please go ahead. Hi, everyone. Congratulations on a good quarter. I just wanted to sort of check in on the commentary that you had around Q3 guidance and a number of pieces of cost inflation that you're starting to see creep through. Do you mind sort of stepping us through the component by component pieces? How manageable do you think some of those cost pressures are going forward? Emily, thanks for the question. I think we alluded to $10 million in the alumina segment. There's really two components to that. That's higher caustic prices that are beginning to flow through. You know caustic flows through on a six-month lag. We're just now starting to see some of the higher caustic costs flow through the cost of goods sold, and some higher energy costs. We do have, especially in places like Spain, we've got natural gas that is linked to oil prices, so the higher oil prices are driving some of the higher energy costs there. In the aluminum segment, really on a sequential quarter basis, we're seeing around $25 million of higher costs. That's a combination of coke and pitch costs, which are starting to trend up, and some transportation costs. Those are the big components. It's not surprising in our industry for the folks who have followed us for a long time that when you see a run-up in aluminum prices, that there will be a trailing higher raw material cost, and we're starting to see that today. That's really helpful. One follow-up, if I may, just around sort of the alumina market. It seems like that's sort of trailed aluminum for a little bit of time now. Can you provide an update as to what you're seeing there? Thanks. Yeah. Emily, I'll take that one. I appreciate the question. First and foremost, I think it helps to demonstrate the fact that these are two very different markets with two very different sets of fundamentals. It's the reason that we started to move to an API pricing methodology rather than simply having it be a percentage of aluminum. I think there's really two main points that I'd bring up. The first is freight. As you look at the increase in freight costs, it's really driving China to import less alumina and therefore operate more domestically. That tends to, as you see, even those price increases happening inside of China, it tends to incentivize less imports. That helps to constrain, to a certain extent, the alumina pricing environment. The second one, which really ties in with that, is the fact that when you look at the transactions happening on a day-by-day or week-by-week basis, there are as many buyers as there are sellers. The market is balanced, and in fact, probably balanced to a slight surplus. Right now, you don't have a lot of very specific catalysts that are driving the price upwards, the same as you don't have a lot of catalysts to drive the price downwards. I would also just note as well, that aluminum tends to be driven very much by sentiment and by looking at how that demand changes. Because the actual production of aluminum is less sensitive, it means that alumina is a bit less sensitive to some of those macroeconomic trends. Got it. That's clear. Thank you. Thanks, Emily. Our next question will come from Carlos de Alba with Morgan Stanley. Please go ahead. Thank you very much, Roy and Bill. Congratulations on the quarter. A couple of questions. One is on the accrued pension benefits on the balance sheet. The drop is around $700 million, yet, on a cash basis, the payment in the quarter was around $500 million. I wonder if you could explain the difference. Is that a revision on the discount rate assumptions and/or this settlement that also came through in the special items? I think there was a pension lump sum settlement, which might be linked to the decrease in the $200 million excess decrease in the balance sheet versus the cash flow. The second question regarding the market, when would you expect that the focus in China on environmental aspects and emission reductions will result in lower net exports of aluminum semi products and what have you, and therefore start to benefit the balance in the rest of the world? Carlos, I'll take the first one, that's a great catch to see how much we contributed versus the change in the liability. We did contribute the $500 million. The biggest additional move between the balance sheet is that we remeasured the part of the US pension plans. The reason why we remeasured part of those US pension plans is because when we offered the lump sum offer, we've had enough people taking the lump sum out of the pension plan that the accounting treatment requires us to remeasure a part of that. That's the decline, because you've seen an increase in discount rates from year-end. In part, that's what drove that change. Carlos, let me answer your market question. I think that is also a very good question. When we look at China today, we're already starting to see different provinces take active steps to start to meet those targets. It's the reason we highlighted the dual control methodology, because not only is it a pretty neat graph, it's also having actual effects and impacts on the ground. We're starting to see China become tighter and tighter. In fact, we believe China is in a deficit situation. While they continue to have pretty steady net exports, their imports over these last few months have actually grown. I think the answer to your question is, I think you're already seeing the impact of those changes. It's really impacting less in their production of semis that they then export in more in the fact that they're importing metal, to be able to address the demand that they have inside of China. You can also see that in the release of inventory from the strategic reserves, which is also demonstrating the fact that they are short of metal right now. All right. Excellent. Thank you very much, guys. Thanks, Carlos. Our next question will come from David Gagliano with BMO Capital Markets. Please go ahead. Hi. Thanks for taking my questions. I just have a couple of questions to address some targets that were set last quarter that seemed to have changed in the guidance this quarter. First of all, on the bauxite business, I think last quarter it was a $59 million EBITDA line, and the commentary around the Q2 was flat quarter-over-quarter, came in at $41 million, and the guide for the Q3 is flat quarter-over-quarter. Can you talk about what's changed there in the bauxite business? Biggest change, David, is that some intercompany pricing was reduced between one of our mines to one of our refineries. With the decline in bauxite prices that we're seeing globally, we adjusted that. That is approximately, and I'm going to estimate now, approximately 12 of that change. That's the biggest impact. Okay. Is sort of that low 40s per quarter a reasonable run rate moving forward then, or are there other adjustments? Yeah, as we said, for the Q3, we're expecting that to be flat. We don't typically adjust bauxite prices between the mines and the refineries, but we have seen a fairly large decline year-to-date in bauxite pricing. We made that adjustment. Okay. It actually kind of dovetails into my next question, which is in the alumina segment. Last quarter, the list of special items for consideration for the next quarter, meaning this quarter, was a $25 million in total one-time increase in costs. I noticed that there wasn't any commentary around a $25 million reduction in costs in the Q3 in the alumina business. Should we assume a $25 million reduction in alumina costs in the Q3? No. I think we said alumina costs, I think we say that it will be a $10 million negative in the Q3, and that's related to the higher raw materials and higher energy costs. We are spending a little bit more maintenance in the Q3 than what we had anticipated. Given the strength of the metal markets largely, but to a lesser extent in alumina, we're spending a little bit more maintenance than what we had anticipated in the Q3 versus the Q2. As you're walking down our segments, you're probably going to get to aluminum here shortly, so I'll answer the question in advance. In the case of aluminum, we are investing a little bit more in the Q3 on pot restarts than what we had anticipated. Given the strength of the overall metal prices, we're trying to make sure that we have all the pots online that we can possibly have online to be producing metal. The payback's very quick at today's prices. Okay. That's helpful. Thanks. Actually, just to follow up on the alumina side, so then what happened to that $25 million that was supposed to be a one-time increase in cost? Are we talking about then we now have another, so it's kind of $35 million up from the Q1 on costs? Yes. $25 million increase Q2 to Q1, and then anticipating a $10 million more increase in the Q3. Remember that the $10 million includes raw materials. We are starting to see an increase in raw materials and energy prices. Yes, that's the case. Okay, that's helpful. Thanks. Appreciate it. Dave. Our next question will come from Alex Hacking with Citi. Please go ahead. Yeah, thanks, Roy and Bill. I have a couple of questions. Firstly, just on Slide 13, the guidance for the aluminum shipments. You did $3 million in the H1. The FY guidance implies a slowdown in the H2. Is that still fair, and is there a specific reason for that? Secondly, I'm curious in your thoughts around the Midwest premium. It's amazingly strong. Obviously, it's great to see. I guess, how sustainable do you think that is? What do you think are the key forces behind it? Is that just reflecting strong aluminum demand around the world, high freight costs, or are there other things going on there that you think may be more structural? Thanks. Let me take the aluminum shipments. There are two things that are driving, and I would certainly not read the H2 being weaker than the H1 on aluminum shipments. The two structural things that are driving that lower. In the H1, we had some inventory in the San Ciprián facility that, because of the labor dispute at the time, was hung up in inventory going into the Q1 that we were able to ship out in the Q1. That elevated shipments higher. Secondly, you have to remember, included in those shipments also for the Q1, was the Warrick Rolling Mill, and we've subsequently divested the Warrick Rolling Mill. Underlying shipments are as strong in the H2 as the H1. Alex, I'll take your question on Midwest premium, and I think you started to answer it yourself. We need to start off with the understanding that it's now a duty paid, duty unpaid market because of the 232 premium. The fact is that there's just unprecedented demand, and so there's just not enough metal inside of North America, which is really what is the very basic structural change that is driving those premiums up. Being able to divert tons to get it into the market takes time. From our perspective, it's very well justified because it looks at how that dynamics are playing out in the market today, and will continue to develop through time. Thank you. Appreciate it. Thanks, Alex. Our next question will come from John Tumazos with Very Independent Research. Please go ahead. Thank you. It is great to see all the good results. Hi, John. Hey, John. Hi. How much is the impact of the green aluminum pricing to date? Is it as much as 0.5% or 1% or 5% of the $460 of EBITDA for metal? Second question, you described the 10% cost increase in alumina being driven by caustic. Of course, currency and energy is part of that. Bauxite unit costs only rose 2%. Could you explain how the bauxite rose so much less? Obviously, it has the Aussie dollar and diesel and other things hitting it too. I can answer your green premium, and I think the simple answer at this point is that it's still relatively immaterial. While there is a true premium, and you can see that in some of the discussions in listed indices, it really so far is a pretty small total of our product portfolio and our sales. It is growing very quickly, and I would argue that that premium also is headed upwards. Right now, it's still relatively immaterial, John. Thank you. John, let me try to address the cost question, and making sure that I understand the premise of it. The cost structures of bauxite and alumina are just fundamentally different. You alluded to the Aussie dollar, and they both have an Aussie dollar component to them, right? That's one of the few linkages between the two. In the case of the refining business, as you can see in the backup, we give you the cost structure of the refining business. Some of the big components there are caustic natural gas, which is on a lag, underlying labor costs. To do a flat-out comparison of bauxite costs to alumina costs is really difficult. As I said, in the case of the alumina costs, we had some higher maintenance in the Q2. We're starting to see caustic prices increase. Bauxite is much more stable. Thank you. Thanks, John. Thanks, John. Our next question will come from Michael Dudas with Vertical Research. Please go ahead. Good evening, Roy, Bill, Jim. Hey, Mike. Hey, Mike. Just a question on portfolio transformation and non-core asset sales, I guess, combined in this. Certainly, you've done a very solid job of not only exceeding expectations, but being visible on what you're doing here. You highlight San Ciprián and Rockdale, but in the three-year plus that you're talking about portfolio transformation, is anything in the horizon that's different, changed? Is the 2022, 2023, 2024 outlook or what the portfolio could be much different than maybe what you would have thought in 2017 and 2018 prior to the massive structural and cyclical changes we've seen in the market that you serve? Let me take a first shot at that, Mike. The purpose behind the portfolio transformation is to ensure that we have really a set of assets that can succeed no matter what's happening in the market cycle. Of course, we take into consideration the current market impacts and how that might be changing through time. At the same time, we want to make sure that we have a cost competitiveness positioning that will be successful no matter what. I would say the purpose behind the portfolio transformation has not changed. I would also highlight the fact that it is a program that can result in a fundamental change in the overall cost structure, and Portland's a great example of that, as well as curtailments and closures or divestitures.To be quite honest, the going between those different axes might change depending on what's happening in the circumstances around us. We still have some work to do. Part of the reason that you've got a five-year period is that some of those step change moments would happen later in the five years. You really don't have access if you have a power contract expiring in 2023, for example, until you get to that point to be able to actually make that step change and make a decision about the plant. We are still very much committed. As Bill had alluded to earlier in the Q&A session, your outcomes might change depending on how the current environment is swirling around you. The underlying purpose of having very cost-competitive plants and having plants, frankly, that are also low carbon and that meet the demands of the future aluminum market are very much top of our minds. Just to follow up on that last comment about low carbon and such, over the next 24 months or so, do you see a significant investment, or how will you stage or structure some of the progress that you're seeing, obviously, with some of your initiatives, and when do you think there will be required a lot more to accelerate the investment or potential from Alcoa, that some of this capital could be allocated much more aggressively in those areas, which I think most people would probably be appreciative of? Yeah, Mike, the way I would answer that is that Alcoa has a fundamental advantage in that the way that we have grown has given us a portfolio that is going to be very rich and very positive when you look at it from a green perspective, which doesn't mean that we stand still at all. As you know, we have a target to drive renewable energy up from 78% to 85%, while at the same time moving down the cost curve. We're just getting started on mechanical vapor recompression inside of alumina, which is the step change. We're already the lowest carbon intensity alumina refiner in the planet. As we think about what does the future look like, we need to see if we can find ways to start using renewable energy rather than natural gas inside of alumina refining as well. I would also highlight the ELYSIS research and development project, which is that next and most green aluminum that could be on the planet. Right now, that's a relatively minimal outlay. It's actually stepping forward, and we're starting construction on the first commercial scale inert anode cells as we speak right now. Would you get to be able to prove that, and we've said that would be done by 2024, when we have the commercial package available. That would open up a question about how that investment would take place, investment or licensing. Excellent. Thank you so much, Roy. Thanks, Mike. Our final question today will come from David Gagliano with BMO Capital Markets. Please go ahead. Hey, Dave. Great, you're back. Yes, I am. Just a quick follow-up, really. I wanted to ask you mentioned value-add a few times here, obviously. Can you just give us a sense how much value-add product is Alcoa producing now? What is a current value-add premium on average for your product, and can you just give us a bit of a range as to how much you expect that might improve in terms of the contracts for next year? Thanks. Yeah. Value-add products is, I don't know the exact number, it's 52%-53% of our total metal sales. It's hard to give a range just because the product differential is very wide, right? The variety of products that we sell are wide. You have everything from foundry in North America to slab to billet in North America and Europe. We'd be looking to try to drive better pricing going into 2022. As Roy said, the markets are very strong, and hopefully, that allows us to improve pricing for 2022. I'm sorry to press on, is there a way to give a bit of a framework around what you're, just on average, so you don't give up any commercial issues or anything like that, just on average, what is a reasonable expectation? Just so we can kind of model it in. Yeah, no, it's too early to give you an expectation around increases in VAP at this point, Dave. We'll be in the process of negotiating them with our customers between now and the end of the year. All right. Okay. Thanks very much. Thank you. Thanks, Dave. This does conclude our Q&A session. I'd like to turn the conference back over to Roy Harvey for any closing remarks. Thank you, Cole, and I want to thank everybody for your questions today and for joining us. We're proud to be a leader in the industry, and due to the hard work across our company, Alcoa is stronger today than at any time since our launch in 2016. Our strategic priorities are working to bring results. We are doing what we said we'd do, making sure Alcoa is successful through all the market cycles. We will continue the strong momentum, stay focused on continuous improvement and operational stability across the aluminum value chain to capture benefits from improved markets. With that, please be safe. I look forward to speaking with you again in October for our third-quarter results. Thank you. Ladies and gentlemen, the conference is now concluded. Thank you for attending today's presentation. You may now disconnect your lines at this time.