Good day, ladies and gentlemen, and welcome to the Axcelis Technologies call to discuss the company's results for the Q4 and full year 2021. My name is Latif, and I will be your coordinator for today. At this time, all participants are in a listen-only mode. We will be facilitating a question-and-answer session towards the end of this conference. If at any time during the call you require assistance, please press star followed by zero, and the coordinator will be happy to assist you. I would now like to turn the presentation over to your host for today's call, Mary Puma, President and CEO of Axcelis Technologies. Please proceed, ma'am. Thank you, Latif. With me today is Kevin Brewer, EVP and CFO, and Doug Lawson, EV P of Corporate Marketing and Strategy. We are all participating in this call remotely, so I would like to apologize in advance for any technical difficulties. If you have not seen a copy of our press release issued today, it is available on our website. Playback service will also be available on our website as described in our press release. Please note that comments made today about our expectations for future revenues, profits, and other results are forward-looking statements under the SEC's safe harbor provision. These forward-looking statements are based on management's current expectations and are subject to the risks inherent in our business. These risks are described in detail in our Form 10-K annual report and other SEC filings, which we urge you to review. Our actual results may differ materially from our current expectations. We do not assume any obligation to update these forward-looking statements. Good afternoon, and thank you for joining us for our Q4 and year-end earnings call. 2021 was a good year for the semiconductor industry and a very good year for Axcelis. Our full-year revenue, gross margin, and operating profit were all records since we became an independent public company in 2001, and we surpassed our $650 million revenue model two years ahead of plan. We have benefited from unprecedented levels of CapEx spending, especially in the implant-intensive mature process technology markets. This has resulted in the ion implant TAM essentially doubling to approximately $2 billion. Adoption of the full Purion product family has been strong and continues to gain momentum across a broad customer base. To date, solid execution by our operations team has allowed us to keep up with this high level of customer demand. As has been the case for nearly two years now, our employees have managed through many difficult logistical challenges brought on by the pandemic and supply chain. I would like to thank them once again for delivering these results while continuing to serve our customers and adhering to safety protocols. These challenges have continued into 2022, but demand for semiconductors and the equipment to build them remains extremely strong. As a result, we are planning for another year of significant growth, and we expect to achieve a quarterly revenue run rate supporting our $850 million revenue model this year. Our fourth quarter financial performance was well above our guidance. Revenue for the Q4 was $205.7 million, with earnings per share of $1.05, gross margin of 43.5%, and a year-end cash balance of $295.7 million, a company record. For the full year 2021, we surpassed our $650 million revenue model more than two years early with revenue of $662.4 million, a company record, earnings per share of $2.88, and gross margin of 43.2%, also a company record. Our aftermarket business, or what we refer to as CS&I, continued to contribute significantly to our revenue and gross margin. CS&I revenue in Q4 was $58.4 million and $207.8 million for the full year 2021, a company record. This strong performance was a result of high fab utilization, the rapidly growing Purion installed base, and customers maintaining a higher level of spares and consumables. The growing mature process technology market continues to be an area of strength for Axcelis, with 82% of fourth quarter shipments going to mature foundry logic customers, two percent to advanced logic customers, and 16% to memory customers, with NAND accounting for six percent and DRAM 10%. For the full year, the mature process technology market represented 82% of shipments, with memory accounting for 17%, comprised of nine percent NAND and eight percent DRAM. Advanced logic accounted for one percent, resulting from revenue recognition for a Purion H high-current evaluation system. China continues to be a strong market for Axcelis due to robust investment, particularly by a large number of domestic customers serving the mature process technology market. The geographic mix of our system shipments in the Q4 was China 46%, Korea 20%, Europe 11%, the U.S. five percent, Taiwan five percent, and the rest of the world 13%. For the full year, our geographic split was China 54%, Korea 19%, Europe 14%, Taiwan two percent, the U.S. two percent, and the rest of the world nine percent. Visibility into 2022 is very good, with a significant number of orders already in place throughout the year. Additionally, because multiple customers are planning fabs and expansions into 2023, we are already seeing initial orders to support these projects. For the Q1, we expect revenue of approximately $193 million, gross margin of approximately 43%, operating profit of approximately $41 million, and earnings per share of approximately $0.92. The industry is in the strongest cycle ever seen. It is being driven by several factors. First, the mega trends, including 5G, artificial intelligence and data analytics, augmented and virtual reality, the electrification of the automotive industry, and early investments supporting the Metaverse. The second driver includes near-term accelerants like chip shortages, work from home and hybrid work environments, and early order placements and increased inventory levels to compensate for supply chain challenges. Lastly, we can't forget geopolitical factors like tariffs and export controls and nationalistic investments in the industry, driven by the desire for more national control over valuable semiconductor devices, design tools, manufacturing equipment, and know-how. In addition to a strong market, the implant TAM has increased significantly to approximately $2 billion. This is driven by an overall increase in wafer starts, by significant investment in the power and image sensor markets, which are more implant-intensive and require our more advanced Purion product extensions, and by the growth of foundries serving the mature markets, where ion implant is a fab bottleneck due to the large mix of products. Let's take a closer look at the individual market segments. We expect that the mature markets will account for approximately 70%-80% of our total system shipments in 2022 due to the growth rate of this segment and the strength of Purion products supporting this market. China will continue to be a significant contributor to our success in this market, although it will comprise a smaller percentage of total revenue as we see growth in other regions. In Q4, we successfully closed an evaluation of a Purion XE silicon carbide high energy system for a power customer, highlighting our continued strength in the silicon carbide segment. For 2021, the overall power segment accounted for 29% of systems revenue, and we believe this segment will again comprise 25%-30% of our systems revenue in 2022. Two of our three outstanding evaluations are Purion XE Max high energy systems focused on manufacturing the most advanced image sensors. In 2021, the image sensor segment accounted for 22% of systems revenue, and we expect it to represent a similar mix of 20%-25% in 2022. Our growth in these segments is clear and sustainable, and most importantly, it is tied to long-term trends beyond any increases driven by semiconductor shortages. We expect the memory market will continue to improve in 2022 and will approach revenue levels seen at the last memory peak. Q4 saw a quarterly increase in both memory shipments and bookings. Memory accounted for 17% of systems revenue in 2021, and we expect it to increase to between 20%-30% in 2022. We maintain a strong and growing position in memory. Last quarter, we shipped a Purion M medium current evaluation to a memory customer for a DRAM application and closed a Purion Dragon high current evaluation at a different DRAM supplier, paving the way for production buys in 2022 and beyond. Kevin? Thank you, Mary, and good afternoon. Axcelis delivered exceptional fourth quarter and full year 2021 financial performance. Strong execution across the board and significant leverage in our business model drove an increase of almost 120% in full year operating profit and revenue growth of 40%. In the fourth quarter, we began production at the new Axcelis Asia Operations Center in South Korea. We are happy to say that our first system, a Purion XE, shipped in January. This factory adds manufacturing capacity to support our $850 million and $1 billion revenue models. As Mary said, we expect 2022 to be another great year for Axcelis, end markets are strong and visibility into 2022 and early 2023 is very good. Like others in the industry, the headwinds that we experienced in 2021 are continuing to provide challenges. We have built the anticipated costs and supply chain constraints into our Q1 guidance, but things are changing almost daily. Our operations and engineering teams remain engaged in activities to meet our customer requirements for systems and support. Now turning to our fourth quarter and full year 2021 financial results. Q4 revenue finished at $205.7 million and above our guidance, compared to $176.7 million in Q3. Q4 system sales were $147.3 million compared to $126.2 million in Q3. Q4 CS&I finished well above our forecast at $58.4 million compared to $50.5 million in Q3. Strength in CS&I continues to be driven by high fab utilization rates, a growing Purion installed base, tool upgrades, and customers maintaining a higher level of spare parts inventory. We expect Q1 CS&I revenue to be approximately $50 million and recommend modeling the remainder of 2022 at $55 million per quarter. Full year 2021 revenue was a record $662.4 million compared to $474.6 million in 2020, an increase of 40%. Systems revenue was $454.6 million compared to $293.6 million in 2020. CS&I revenue was $207.8 million compared to $181 million in 2020, an increase of 15%. In Q4, sales, our top ten customers accounted for 71.9% of our total sales, compared to 77.3% in Q3. Three customers were at 10% or above in Q4, the same as Q3. For the full year, 49.2% of the revenue came from our top ten customers, with one customer at 10% or above. Both are strong indicators of the breadth of our customer base. Q4 system bookings were $194 million compared to $244.2 million in Q3, with a Q4 book-to-bill ratio of 1.29 versus 1.86 in Q3. Backlog in Q4, including deferred revenue, finished at $460.6 million, a new record compared to $406.6 million in Q3. Multiple customers are planning new fabs and expansions for 2023 that are already beginning to drive bookings. Q4 combined SG&A and R&D spending was $42.9 million, or 20.9% of revenue, compared to $40.1 million, or 22.7% in Q3. SG&A in the quarter was $26.5 million, with R&D at $16.4 million. In Q1, we expect SG&A and R&D spending to be approximately 22% of revenue. Q4 gross margin was 43.5% above our guidance. Q4 gross margin was driven by higher than forecast CS&I revenue, product mix, and some cost out activity. We also closed four evaluation systems in the quarter. Full year gross margin was a record 43.2%, up 140 basis points compared to 2020. We are guiding Q1 gross margin of approximately 43%. Gross margins will fluctuate quarter to quarter based on product and customer mix, the number of evaluation tools closed, and a percent of revenue from our previous CS&I business. We have made solid progress on gross margin improvement, fueled by growth in our CS&I business, Purion product extensions, and across the board cost out. Our new business models reflect continued gross margin expansion, which is being driven by the following assumptions. Higher revenue from CS&I and Purion product extensions, incremental supply chain value and value engineering, planned labor and quality improvements, and a return to a more typical supply chain logistics environment as pandemic-related disruptions ease. Operating profit in Q4 finished at $46.6 million compared to $36.4 million in Q3. Full-year operating profit was a record $127.3 million, an increase of almost 120% compared to $58 million in 2020. We are guiding Q1 operating profit of approximately $41 million. Q4 net income was $35.7 million or $1.05 per share, compared to $27.5 million or $0.81 per share in Q3. Full-year net income was $98.7 million, or $2.88 per share, almost double 2020 at $50 million or $1.46 per share. We are guiding Q1 earnings per share of approximately $0.92. As noted earlier, our Q1 guidance reflects the known impacts on our business from supply chain and pandemic-related issues, but remains an evolving situation. Q4 receivables were $104.4 million, compared to $78.3 million in Q3. Q4 inventory ended at $195 million, compared to $196.8 million in Q3. Q4 inventory turns, excluding valuation tools, finished at 2.7, compared to 2.4 in Q3. Q4 accounts payable were $38 million, compared to $35.5 million in Q3. Q4 cash finished at $295.7 million, a company record, compared to $271.8 million in Q3. In the quarter, we generated $38.1 million of cash from operations and settled share repurchases of $12.5 million. Through the end of 2021, we returned over $75 million of cash to our shareholders through stock repurchases. We finished 2021 with strong momentum and are excited about the prospects of 2022. It is an exciting time for Axcelis with unprecedented growth in the industry and solid customer demand for our products. We will continue to work hard to minimize disruption to our customers who have high expectations for our ability to execute on our commitments. Lastly, before closing, I want to thank our employees for their outstanding support and execution throughout 2021. We have a great Axcelis team. I also want to thank our suppliers and customers for their continuing support. Without them, we would not have been able to deliver such strong results in 2021. Thank you. I'll now turn the call back to Mary for our closing comments. Thank you, Kevin. We are pleased with our fourth quarter results as well as our exceptional overall performance in 2021, and we are looking forward to another year of strong growth in 2022. Axcelis has a competitive Purion product line, a broad and diverse customer base, a strong balance sheet, and a dedicated team of employees. We are well positioned for significant sustainable growth. The implant market is increasing thanks to strength in the overall semiconductor industry, but also due to a rapidly expanding mature process technology segment. The capabilities of Purion product extensions, like the Purion Power Series, combined with the implant-intensive nature of the image sensor and power device segments, uniquely position Axcelis to benefit from the electrification of the automotive industry. We are living. Followed by one on your touch-tone telephone. If your question has been answered or you wish to withdraw your question, press the pound key. Please press star one to begin. Your first question comes from Patrick Ho of Stifel. Your line is open. Thank you very much, and congrats on the nice quarter and the year. Maybe Kevin, first off, in terms of the supply chain issues that's been prevalent in the industry, particularly this quarter, two-part question. One, is it primarily a parts and component issue, or are there other variables involved? Maybe secondly, how do you allocate, I guess, priority in terms of potential parts shortages between system builds versus, say, the CSNI business and spare parts? Because I'm sure your customers are trying to keep their fabs running, you know, as full as possible. How do you balance that, I guess, dynamic? Yeah. Thank you, Patrick. Good question. I would say the current supply chain issues right now are more component-driven. What we're seeing is suppliers of electronic things, like power supplies, for example, are experiencing chip shortages on our end. In some cases, where we have proprietary designs, our engineering team has been working to come up with alternative parts. We also use our supply chain team to search brokers and look for parts for our suppliers. Those are some of the things we've been doing. As I would say, it is more at this point, I think, a component-related thing and more specifically, chip shortages. In terms of how we allocate, I mean, first and foremost, we always do things that'll keep the customer up and running. Machine down rushes, for example, if they're down in the field and need a part, if the only part I got is on a tool sitting in manufacturing, it's coming off the tool. We prioritize basically how we're sending out parts based on customer need. Machine down rushes, inventory they may need to keep their tools up, and then the third priority basically is the systems that we're building that we wanna ship for the quarter. It's, you know, as you picked up, I think most people have been saying it's very tight right now. It is tight. You know, Omicron, I think, certainly had a little impact too on some of our suppliers. You know, some of them experienced some pretty big labor shortages in the first month of the year when everybody got back to work. You know, what I'll say is we'll just continue to work through those things. You know, it's been a long haul. It's been two years now, dealing with, you know, day-to-day issues. We're just gonna continue to do the things we've been doing and, you know, to the extent we can, we're trying to make sure we can keep a buffer on inventory, but that's that has tightened up a little bit for sure. Great. That's helpful. Maybe as my follow-up question, maybe for you, Mary, in terms of the visibility, and you mentioned some qualitative comments about 2023. We see the demand out there for the mature nodes today and obviously some of the new fab expansion plans that are being talked about by many of these types of players. As you look towards 2023, is it just simply a lot of your existing customers on the mature nodes expanding capacity, or are you seeing a further broadening of that customer base into 2023? You know, Patrick, as we've said, the mature process technology markets remain very strong. The fab utilization is high, and some of the supply chain constraints have created a high demand both for tools and for parts and spares and consumables. We see it across all the segments in image sensors, in mature process, so image sensors, general mature foundry, power devices. In terms of the customers, we're seeing the demand come from both existing customers who are expanding capacity either in existing facilities or putting up new fabs. There is a customer base expansion as well. There are a significant number of additional new customers that we are seeing out there. I would say the predominance of these customers are actually in Asia. Many of them are in China. We continue to, you know, watch all of those things very closely. 2022 is really filling up very nicely, and 2023, early 2023, we actually have very, very good visibility already. Great. Thank you very much, and congrats again. Thanks, Patrick. Thank you. Thank you. Our next question comes from Craig Ellis of B. Riley Securities. Your line is open. Yeah, thanks for taking the question, and congratulations on the very strong execution in the quarter and in the outlook. Mary, I just wanted to start by going back to the mature foundry comment. The company's been very much on message that mature foundry's been an area of strength, and one of the things that we saw very recently is one of the leading U.S. analog companies that traffics in mature foundry put out a capital spending plan where they project very high levels of capital investment over the next three years. Can you just talk about the degree to which your customers, and not looking for any names here, but to what extent are customers really talking about multiyear visibility? I heard the comments on visibility into early 2023, but can you just flesh out that dynamic a little bit more for us? Yeah. Well, we stay very close to our customers, and I'm not gonna comment on any specific customers that you brought up, Craig. Customers are right now, and I think it's because of a lot of the comments that Kevin made about supply chain, customers are very eager to get in line, you know, for equipment. He also mentioned, and as I did, that they are also buying potentially additional aftermarket parts just to make sure that they've got inventory on-hand. That has improved visibility tremendously. They are sharing their plans with us, again, both in terms of just fab expansions and new fabs. You know, when I talk about visibility into 2023, it's not just, gee, we know there's this new fab coming up. We are actually getting orders for equipment for those fabs. They're sharing plans, and they are actually starting to place orders for that equipment that will go into those new fabs. Got it. That's helpful. Craig, let me Oh, go ahead, Doug. Let me just add one thing to that. Yep. I think the other thing that's going on in the mature markets is some of the long-term trends that Mary talked about. You know, the power industry, especially the automotive industry, driving it is a you know five, 10, 15-year you know drive to get to the full electrification. A lot of these customers, you know, are ramping for those initial builds, and you know those are over the course of the next few years. There's a lot of activity there that's planned beyond just you know the ordinary stuff. Yep. That's helpful, Doug. Thanks for that. The follow-up is on the comments around attaining the $850 million revenue target on a run rate basis this year. Can you just provide some color on some of the puts and takes? Would that be possible in the first half of the year, or is the supply chain component issue one that might preclude ramping revenues that quickly? Or conversely, are there things that are happening just from either a mature foundry or a memory standpoint that would argue for linearity that's more back-end loaded, attainment in the second half? Well, I don't think at this point we're going to give you know, really any additional color on how our year is shaping up in terms of you know, front end or back end. You know, Kevin has laid out what he thinks some of the challenges are that we're facing. Again, I think our operations team has done an excellent job managing around those. We're just gonna have to continue to wait and see how that goes. It's you know, right now, again, from our perspective, there's really nothing differentiating the first half of the year from the second half of the year, and we'll just have to wait and see if there are any additional you know, challenges that are thrown into the mix here that could have an impact on that. So far, so good. Yep. That's helpful, Mary. Lastly, Kevin, can you just help us with any color on operating expenses, we think, beyond- The first quarter, clearly there's a strong demand environment, and the market seems hungry for the custom products that you're able to develop. How do we think about what would potentially happen with OpEx as we go through the year? Well, in our 850 model, we have 21% and 22%. As Mary said, we expect to get to that run rate at some point this year. I did say that Q1 would be 22%, so, you know, we'll likely be at that level, but it would continue to come down as the revenue, you know, run rate picks up, and we'd be somewhere in that 21%-22% range, Craig. I think that's, you know, per modeling, maybe stay a little bit, you know, closer to 22%, for a couple of quarters and then start cranking it down a little bit. Got it. Thanks, everybody. Thank you. Our next question comes from Thomas Diffely of D.A. Davidson. Please go ahead. Yes, good afternoon. Thanks for the questions. First, Mary, the percentages you gave us of the different segments for this year, was that just of systems or is that total revenue? No, that was for systems revenue, Tom. Okay. Are you expecting any advanced logic business this year? Yes, we are. We closed a Purion H system. It was an evaluation. We closed that in the fourth quarter for advanced logic. We're working very closely with the customer and expect to have follow-on orders both this year and next year based on their current capacity planning. Great. Thank you for that. Maybe a longer-term question following up on Patrick's earlier. Obviously, a mature market, very strong today. Sounds like activity with new Asian customers is ramping as well. Have you seen a move at all to move some capacity outside of China, back to the U.S. or Europe, especially on the power side? I don't believe we've seen anything to date. Doug, do you have any additional information on that? Well, I'd say, you know, if Tom, your question is around power is active globally. You know, there's a lot of activity in the U.S. and Europe, you know, maybe even a little more than there has been in Asia at this point. It's ramping up a little bit more in Asia. You know, power is very much a global push. Okay. Thanks for that, Doug. Finally, when you look at the memory market, I think you said it should meet the levels it hit back in 2018 at the last peak. When you look at the memory market in terms of new products versus old products, where do you see most of the growth coming from over the next few quarters as we get back to those peak levels? Is it the new products gaining momentum, or is it just the wafer starts picking up the old business again? I think it's actually both. We have a number of products out at customers. As you know, we, you know, we've got a good, strong position in memory. So the existing customers that we have and the applications we have are definitely, you know, we're making additional progress. I think we're also seeing wafer starts obviously drive, you know, capacity expansions. We all know that, you know, implant is capacity driven, and obviously there's capacity being added, so that's going on as well. We do have, you know, some additional things going on. We talked about how we had Purion, the Purion Dragon was qualified at a customer both for DRAM and for Flash. There are, you know, that is a new tool, and that's something that's going to drive market expansion for us at that customer. I just talked about how we placed a Purion M evaluation at a customer for a DRAM application. It is a mix of both, you know, continuing to just grow what we have as well as continuing to add on to that with some of the new products. Great. Well, thank you for your time today. Thank you. Our next question comes from Christian Schwab of Craig-Hallum Capital. Your question, please. Hey, congratulations on a good start here to the year. When we think about the mature node for mature technologies and the visibility in the new customers, can you help parse maybe the difference between adding capacity on mature nodes versus new materials like silicon carbide? I'm not sure I completely understand the question, but the activity for the mature markets is very strong. You know, it's being driven by a lot of things, including the chip shortages, which, you know, are largely in those mature nodes. For the longer term, materials like silicon carbide, silicon power, image sensors, as well as, you know, a lot of microcontroller-type products and communication products are all driving matures as a whole. The implant intensity For image sensors and power devices is very high, you know, even higher than a standard mature process, which is higher than, you know, advanced logic and even memory. Those areas, you know, power and image sensors, you know, have a bit of a multiplier, you know, on our business in the mature. That's, you know, we see that when you look at nearly 30% of last year's revenue coming from power, for example. Yeah. Thanks for that. I guess, let me make the, you know, the question a little bit clearer. I guess the uptake in the ion implant TAM to $2 billion and the movement to electric vehicles where a lot of people are making advancements in silicon carbide to push that customer adoption or product adoption of that. Did you have any idea how you can quantify the positive impact to your TAM from that, what it is today and what it could potentially be, you know, five years from now when adoption is materially higher? We haven't really publicly, you know, discussed that detail to that level of detail, Christian. It is, you know, material. If you look, there's probably three or four research firms that have estimates in terms of wafer starts for power as a whole and for silicon carbide. You know, so I guess, you know, the recommendation would be, you know, to grab a couple of those and we've given information, you know, in terms of the intensity of implant and, you know, that's probably a good metric, but we haven't published our specific numbers to the state. Okay, great. No other questions. Thanks, guys. Thank you. Thank you. Our next question comes from Quinn Bolton of Needham. Your line is open. Hi, all. Congratulations on hitting the 650 model a couple of years early and the successful eval completion for Dragon. First wanted to start just on the near term supply constraints. It sounds like you continue to face some component challenges. I think others in the industry have faced that, you know, certainly for a couple of quarters now. Wondering the component shortages and potentially any absenteeism due to Omicron, is that actually causing you to push systems out of Q1 that you would then expect to capture in future quarters? Or are the components and absenteeism issues not necessarily changing the revenue outlook for the March quarter? Yeah. We have factored in what we know, Quinn, into the Q1 guidance. I'm not gonna tell you that it hasn't caused a little bit of stress on the first quarter. But I think overall, we're still keeping up with things fairly well. You know, if you're trying to take a look at, you know, Q4 to Q1 being down a little bit, you know, we said CS&I would be about $50 million, so you've got about $8 million lower coming on the CS&I side of that. That's a piece of what's bringing us down. But, you know, it's tight. And I would expect, you know, as the year progresses, that things should start to ease up a little bit. Certainly I think Omicron put an extra layer of, you know, complication in everybody's business models. There was lots of challenges before and, you know, I guess the good news is, you know, the illness is not as severe, but the real issue is because you have to quarantine employees that are positive, you know, it was very disruptive to people's workforces. But the good news is, you know, people were able to get back to work a lot quicker than when they got other variants of Omicron. All I can really say is that we've got that factored into Q1, and, you know, there's a little bit of pressure there, which would indicate that, you know, that'll be it, that some of that revenue will fall into a different quarter. Got it. Got it. We're certainly not losing any orders. You know, so you know and we are keeping up with, at this point, with customer requests. I think that's the good news. I don't think there's anything on our schedules yet where, you know, it's caused us not to be able to close an order. Got it. Okay. Thank you. Kevin, the second question for you and then one for Mary. Just, the deferred revenue balance on the balance sheet has gone up from about $20 million in Q1 to $60+ million in the fourth quarter, and that's with several evaluation units closed. I think you said you only have three evaluations currently in the field. Just wondering what's behind that tripling in deferred revenue on the balance sheet over the course of 2021. Yeah. The deferred revenue, actually, the evals, that's more of an inventory hit, Quinn, where that sits because until they convert, it sits in our inventory. The deferred revenue is basically the tools that are being installed. There's a certain carve-out after a tool is shipped because there's revenue that's associated with installation. Until that's completed, you can't recognize that revenue. And there's a carve-out also for the W&I piece of it. I think the biggest thing you're seeing is probably the increase in volume in the business that's going on. The other thing that you will also see, and it's more in the long-term deferred revenue, is there are a number of customers where we're getting a prepayment with the POs, and that will be hung up in long-term deferred revenue. Those are probably the two pieces that are making that go up, especially if you're looking back year-over-year. Got it. Perfect. Just for Mary, you'd mentioned the successful completion of the Dragon eval, and that positions you both for NAND and DRAM now to gain share with that customer. Just wondering, can you share your plans? Do you expect to get follow-on production orders for Dragon this year? Yes, we do. We expect to get follow-on orders. We think at this point, the DRAM business is going to you know, begin that rollout, and then, we look forward to some NAND orders later on, either this year or next year. Great. Thank you. Thank you. Our next question comes from David Duley of Steelhead. Your line is open. Thank you for taking my questions. Doug, this one's probably for you. I think in the past you've mentioned how much more implant-intensive CMOS image sensors are and power devices are. Could you just remind us about that or give us an estimate, you know, a guess as to are they 20% more intensive than a regular part, or what's the range? Well, it depends on the comparison, Dave. You know, there's close to 30 implants, you know, on image sensors or power devices. There's a lot of high-energy implants in both, and that drives the need for products like the Purion XE or a Purion H200. You know, it's good for our business. It's good for our higher energy type of applications. There's also, in those particular devices, oftentimes multiple implants that are done in the same region to create the transistor, you know, parametrics that people are looking for. It is definitely a much higher intensity and a better mix of product for Axcelis. For, let's say, in the memory sector, how many implants are there? Are there 30 implants per device? Or just trying to get some sort of comparison to how much more implant-intensive these markets are, and that helps a- Yeah. answer other questions, obviously. Yeah. It's on the memory. It's very dependent on the type and the customer's process flows and so forth. Can't give you a specific number there in terms of an exact comparison to a power device. They are less than the power devices. Okay. Then, Kevin, you've done such a great job with the, you know, managing the business here, or the whole company has. You know, your cash balance is, like, up almost $92 million on a year-over-year basis. You know, can you just kinda help us understand what you're gonna do with this cash going forward? Can we expect this calendar 2022 to be a higher cash generation year than last year, given the expected revenue growth? I mean, the free cash flow is in the new model. On the $850 million model, it's greater than 20%, and on the $1 billion model, it's greater than 22%. You know, we said we expect to get to that run rate at some point in one of the quarters in 2022. It's, you know, it's gonna be another strong year of cash generation. You know, I expect that we'll continue to return some amount of capital to our shareholders. We've had a program in place now for the past few years, and you know, we'll review what we're thinking about in terms of a follow-on program in our upcoming board meeting, and then we'll get, you know, any details of that out after we do that. I mean, the other thing is we have said that, you know, we're thinking about right now what's beyond the $1 billion model. You know, not gonna say we can't go beyond that into implant, but it's really time we started thinking about, you know, how do we continue to grow beyond that. We're gonna take this year to start looking at what that means in terms of, you know, what may be, you know, M&A that could either, you know, boost the implant part of the business or, you know, if it could even be something, you know, outside of implant. That would obviously be a use of cash if we decided to do something. You know. I guess the short answer is we're gonna continue to return some level of capital to shareholders, and then we're gonna invest the rest of it in the business. Yeah, you know, we're gonna have a strong year. The other thing I would point out, we've been using up a lot of NOLs and deferred tax credits, so we've been fortunate not to have been a cash taxpayer. That's about to end. That's all contemplated in these models at greater than 20%. You know, I just wanna remind people that we have not been a cash payer in taxes. Obviously, it's a P&L impact in our earnings, but we've, you know, we've generated a little bit more cash because we haven't had to cash out, so it's helped the cash balance at year-end. Okay. One final question from me is you talked about having visibility into early 2023. Is that just the timing of fab projects, or is that suggesting that your manufacturing slots are full in 2022? No. Um- All right, go ahead, Kevin. Yeah. It's, I think Mary said, I mean, 2022 is, you know, we've got a lot of visibility that's getting full, but, I'm not gonna say that we can't put additional slots in there. A lot of that is timing of the projects. We are, as we said, starting to book orders in 2023. Okay, thanks. Our next question comes from Mark Miller of Benchmark. Your line is open. Yeah, let me add my congratulations to a great quarter and a great year, and the future looks very bright here. You mentioned you had closed four eval tool qualifications or evaluations in the last quarter, and there was at least one tool, I think it was a Purion M that has been sent out to evaluation tool for a DRAM. What other evals are currently in the field? The other two evals that are out there, we currently have three in the field, are the two Purion XEmaxes that we have. We put out into the field last year. Actually, I think one of them went out in 2020. Those are the two that are out there, and they're both out for advanced image sensor development. Okay. I was surprised because certainly there's a number of major fabs coming up next year, but when I ask this of other semi companies, they were expecting orders later in the year, and it seems like you're getting your orders already. Is there any reason for that? I don't know exactly which customers you're talking about, and I don't wanna comment on any specific customers. Mark, I'm not exactly sure how to answer that. If you're talking about evaluation units, we will be putting more evaluation units out into the field throughout the year. Everything is not going to be front end loaded. Again, I don't know if you wanna rephrase the question or if that answers it. No, I'm just curious. Like I said, it in terms of these new fabs coming in 2023, you said you were already getting orders, and that seemed earlier than other companies have indicated, so. Well, implant traditionally has been one of the first tools that goes into a fab, so I don't know if that necessarily is what's impacting it. That could be one factor. You know, we work very closely with our customers, and we feel very comfortable and confident that these fabs are going to happen. I'm not quite sure what you're comparing it to, but that is what we're seeing. More metrology tools. Okay. Thank you. Thanks. This concludes the Q&A portion of the call. I will now turn the call back over to Mary Puma, who will make a few closing remarks. Okay, thank you, Latif. Thanks to everyone for joining us today. We hope to talk with you virtually at upcoming investor events, and we will be participating in Susquehanna Financial Group's eleventh annual technology conference in March. We thank you for your continued support, and please stay healthy. Thank you. This concludes the presentation. Thank you for your participation in today's conference. You may now disconnect. Good day.