Good morning, and welcome to the AstroNova Fiscal Third Quarter 2024 Financial Results Conference Call. Today's conference is being recorded. If you would like to ask a question during the Q&A portion of today's call, please press star followed by one on your telephone keypad. I would now like to turn the conference over to Scott Solomon of the company's investor relations firm, Sharon Merrill Advisors. Please go ahead, sir. Thank you, Carla, and good morning, everyone. With me on this morning's call are Greg Woods, AstroNova's President and Chief Executive Officer, and David Smith, Vice President and Chief Financial Officer. Greg will discuss the company's segment operating highlights. David will take you through the financials at a high level. Greg will make some concluding comments, and then management will be happy to take your questions. If you've not received a copy of this morning's earnings release, please go to the Investors page of the AstroNova website, www.astronovainc.com. Statements made on today's call that are not statements of historical fact are considered forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. These forward-looking statements are based on a number of assumptions that could involve risks and uncertainties. Accordingly, actual results could differ materially except as required by law. Any forward-looking statements speak only as of today, December sixth, twenty twenty-three. AstroNova undertakes no obligation to update these forward-looking statements. For other information regarding the forward-looking statements and the factors that may cause differences, please see the risk factors in AstroNova's Annual Report and Form 10-K and other filings the company makes with the Securities and Exchange Commission. On today's call, management will refer to non-GAAP financial measures. AstroNova believes that the inclusion of these financial measures helps investors gain a meaningful understanding of the changes in the company's core operating results, and also helps investors who wish to make comparisons between AstroNova and other companies on both a GAAP and a non-GAAP basis. A reconciliation of the non-GAAP financial measures to their most directly comparable GAAP measures is available in today's earnings release. And with that, I'll turn the call over to Greg. Thank you, Scott, and good morning, everyone. We began the second half of fiscal 2024 with a significantly more profitable third quarter, where operating income increased more than threefold to $4.6 million. Operating margin improved 890 basis points to 12.3%, and adjusted EBITDA hit an all-time record, up 81% to $5.7 million or 15% of revenue. This profit improvement is a testament to the great agility, hard work, and execution by our teams around the world. The increased profit generation was achieved despite an 11% year-over-year revenue decline in our Product Identification segment. This was primarily from the supply side of the business, where the lingering negative impact of an ink quality issue from one of our suppliers has decreased ink utilization on some of our printers. To a lesser extent, the temporary effect of higher customer ink inventories ahead of a price increase from that same supplier, and to a degree, the impact of exiting certain product lines as part of the restructuring we announced last quarter. We believe the ink-related slowdown issues will abate as we move through the next few quarters. Additionally, we expect to realize strong margins from several new product releases as they gain traction in the market. Meanwhile, the commercial aviation industry continues to experience robust demand, closing in on, and in some cases, exceeding the 2019 highs. Both aircraft operating hours and new aircraft orders are up markedly. These trends are expected to continue and bode well for the aerospace product line within our Test and Measurement segment in the fourth quarter of fiscal 2024 and beyond. Now, let's review our segment results in a bit more detail, starting with the PI segment. Operating profit increased 62% to $4.8 million, with margin up to 820 basis points to 18.1%. The vastly improved performance primarily reflected favorable product mix as some of the margin improvement actions we implemented earlier took hold. Additionally, we reduced expenses, had lower warranty costs, and improved operating efficiencies from the restructuring. We have simplified the PI segment by transitioning more printer manufacturing from Asia and West Warwick to our AstroNova, Astro Machine plant, rather, in Illinois, exiting low margin or low volume label printers, consolidating international sales and distribution facilities, and streamlined our global channel partner network. As an ongoing fundamental of our strategy, we continue to invest in new products that meet our customers' needs for printing solutions that are compact, efficient, and flexible. In the third quarter, we unveiled three new printers: the QuickLabel QL-900, the TrojanLabel T2-PRO, and the TrojanLabel T3-PRO. The rugged QL-900 is a desktop inkjet label printer designed for full-color labeling applications. Manufactured at our Astro Machine plant in Illinois, the product features a touchscreen interface and internal job library, enabling users to easily manage printer setup and operation. The new T2-PRO is the latest addition to our TrojanLabel brand of compact digital label presses targeted towards industrial and professional printing segments.... With a print width of 12.75 inches and a print resolution of sixteen hundred by sixteen hundred dots per inch, the T2-PRO offers superior cost of ownership across all available aqueous inkjet technologies on the market. The T3-PRO is a compact CMYK digital print module, ideal for OEMs that want to easily integrate a print station into conveyors or other specialty equipment to offer full-color digital printing solutions for envelopes, corrugated, and a wide variety of flat surface products. In addition to those three printers, we recently unveiled the VF-280, a high-speed commercial vacuum feeder. This product is designed to handle a variety of materials like bags, envelopes, heavy cardstocks, corrugated cardboard, jewel cases, calendars, and sheet stocks. When integrated with the TrojanLabel T3-PRO, the VF-280 offers a modular, direct-to-package post-printing system that enables high-quality, full-color automated printing. Customers benefit from faster time to market and reduced waste. In recent months, we've had the pleasure of integrating and interacting with the thousands of current and prospective customers who demoed our digital label printers, envelope printers, and direct-to-package printing solutions at major trade shows such as PACK EXPO in Las Vegas, Labelexpo Europe in Brussels, and the Printing United Expo in Atlanta. What we heard from customers is clear: within the digital printing market, what differentiates AstroNova is our ability to provide customers with a unique total printing solution. We consistently earn high ratings, not only for the breadth of products we offer, but also for the consultative services and support that we provide that tailors a solution to each customer's application and business needs. For instance, within our Astro Machine subsidiary, we are continuing our product innovation initiatives with the upcoming launch of two new digital printing and addressing systems, purpose-built for a large OEM customer. These products embody the voice-of-the-customer methodology that is a central tenet of our AstroNova Operating System. Engaging with customers on the design engineering of new products has enabled us to apply that valuable learning to gain traction in both existing and new market verticals. Switching to the Test and Measurement segment, third quarter revenue increased 16% year-over-year to $11 million, with growth in both our aerospace and Test and Measurement product groups. Segment operating profit was $2.6 million or 23.2% of revenue, compared with $1.7 million or 18% of revenue a year earlier, driven primarily by favorable product mix and the impact of operating leverage on the higher revenue in that unit. As we've discussed on prior calls, we are gradually upgrading OEM and direct airline customers to our more advanced ToughWriter-branded printers from the other three brands in our portfolio. Paring down the number of brands that we offer will allow us to reduce our overall manufacturing costs, thereby driving higher margins. By the end of fiscal 2027, we estimate that nine out of every 10 printers we ship will be a ToughWriter, compared with a little less than four in every 10 today. As we execute that transition, we will want to also point out to investors that an additional benefit of this transition will be that the royalty we pay to Honeywell International under our asset purchase and licensing agreement will decline, and it will disappear completely at the end of the third quarter of fiscal 2028. We'll not be forecasting that decline for you, but we will report on that as it happens, beginning next year. Finally, I'd like to mention another platform design win for our ToughWriter printer. The ToughWriter will be standard equipment on Boeing's new 777 X, a wide-body twin-engine jetliner expected to enter service in 2025. Last month, our aerospace group exhibited at the Dubai Airs how, where I had the privilege of touring the 777 X flight test aircraft and hearing from a number of commercial aircraft airline pilots about the favorable experiences with our printers. An Embraer captain captured it best when he referred to our printer as, quote, "A lifesaver." We agree. With that, let me turn the call over to David for some further financial comments. Thanks, Greg, and good morning, everybody. I'll reinforce and add some comments about the third quarter financial performance. As Greg said, total revenue for the quarter was $37.5 million, down about 5% year-over-year, with the lower revenue in the PI segment, partly offset by growth on the test and measurement side. Hardware revenue of $12.9 million was about 8% higher than last year's third quarter, and supplies revenue was down about 13% to $20 million, while the service and other revenue grew about 4% to $4.7 million. Domestic revenue was $21.8 million for the third quarter, 55.8% of the total, compared with 57% in the year-earlier period. International revenue was $16.6 million, or 44% of revenue, compared with 43% in the third quarter of fiscal 2023. Gross profit increased 770 basis points to 39.4% in the third quarter, driven by better product mix. Lower manufacturing expenses and better absorption and reduced period costs. Of the improvement, the directly trackable impacts on the PI segment restructuring benefits was approximately $450,000 in the fourth quarter, third quarter rather, and that impacted both gross margin and operating expense. Operating expense declined about 9% in the third quarter to $10.2 million on a non-GAAP basis. This and the factors Greg outlined were why the operating income increased more than twofold, to $3.6 million, while non-GAAP operating margin improved over 710 basis points to 12.3%. On the bottom line, we reported net income of $2.8 million or $0.37 per diluted share for this just finished quarter, versus $289,000 or $0.04 per diluted share in the year earlier period. But keep in mind that the GAAP net income for the third quarter of fiscal 2023 included transaction costs of $540,000 or $0.07 per diluted share associated with the August 2022 acquisition of Astro Machine. On a non-GAAP basis, net income for the third quarter of fiscal 2023 was $0.11 per diluted share. Adjusted EBITDA in the third quarter of this year was $5.7 million or 15%, compared to $2.4 million or 6% of revenue in the same period last year. Excluding transaction costs, last year's Adjusted EBITDA for the third quarter was $3.1 million or 8%. Bookings for the third quarter of fiscal 2024 increased 1% to $35.5 million from $35 million in the third quarter last year. Backlog as of October 28, 2023, decreased 20% to $31.2 million from $39.3 million a year ago. But this decline is largely due to timing in the T&M segment and is not indicative of what we expect in the fourth quarter this year, when we expect the income statement overall to be consistent with the third quarter. As previously discussed, we had identified about 150 printers sold to customers that were affected by the faulty ink, and we're working with those customers to either repair or replace the affected printers on a gradual basis. We anticipate this will be largely done by the end of this fiscal year at the end of January 2024, with maybe some of it trailing into the first quarter. In Q3, we incurred costs of about $240,000 for that program, which had been reserved for in connection with the restructuring. Inventory reduction was modest, and while the supply chain challenges are abating, we're still recovering on the inventory level re-reduction task that we have. Inventory was $46.3 million at the end of the quarter, down 9% from the end of the fiscal 2023. Term loan debt at the end of the third quarter was $9.5 million, compared with $12 million at the end of last fiscal year. The revolving credit is down $1 million to $14.9 million. Our expectation is to generate cash from earnings and working capital reduction in Q4, and to continue the current focus on using available cash to reduce debt. So I'll turn the call back to Greg for closing comments. Thanks, David. Our operational and financial momentum entering the final quarter of fiscal 2024 is strong. The recently completed strategic restructuring has significantly improved the cost structure and margin profile of the business, and we expect both segments to perform in line with these results again in the fourth quarter. The restructuring of our PI segment allows us to focus on those products with the strongest volume and margin potential, while continuing to drive demand through innovative new solutions, such as the QL-900, the T2-PRO, and the T3- PRO. And we're very excited about the new OEM products in our Astro Machine pipeline. In the Test and measurement segment, the key demand drivers are commercial air traffic, new aircraft orders, and OEM market forecasts, all of which are pointing up and to the right. Based on strong demand, high barriers to entry, and the extended nature of the contracts, we feel very good about the prospects for our aerospace products group over the long term. Now, with that, I turn the call back to the operator for questions. Thank you, Greg. To ask your question, please press star followed by one on your telephone keypad. When you are preparing for your question, please ensure your device is unmuted locally. If you wish to revoke your question, please press star followed by two. We can now pause here briefly to wait for questions to be registered. We have no questions registered at this time. With that, I will hand back to Gregory for final remarks. Well, thanks everyone for joining us here this morning. As always, we look forward to keeping you updated on our progress and hope you have a wonderful holiday. Bye now. This concludes today's call. Thank you for your participation. You may now disconnect your line.