Good day, ladies and gentlemen, and Welcome to the Amkor Technology Q3 2023 Earnings Conference Call. My name is Diego, and I will be your conference facilitator today. At this time, all participants are in a listen-only mode. After the speaker's remarks, we will conduct a question-and-answer session. As a reminder, this conference is being recorded. I would now like to turn the call over to Jennifer Jue, Head of Investor Relations. Miss Jue, please go ahead. Thank you, operator. Good afternoon, everyone, and thank you for joining us for Amkor's Q3 2023 earnings conference call. Joining me today are Giel Rutten, our Chief Executive Officer, and Megan Faust, our Chief Financial Officer. Our earnings press release was filed with the SEC this afternoon and is available on the investor relations page of our website, along with the presentation slides that accompany today's call. During this presentation, we will use non-GAAP financial measures, and you can find the reconciliation to the U.S. GAAP equivalent on our website. We will make forward-looking statements about our expectations for Amkor's future performance based on the environment as we currently see it. Of course, actual results could differ. Please refer to our press release and SEC filings for information on risk factors, uncertainties, and exceptions that could cause actual results to differ materially from these expectations. Please note that the financial results discussed today are preliminary, and final data will be included in our Form 10-Q. And now I'll turn the call over to Giel. Thank you, Jennifer. Good afternoon, everyone, and thank you for joining the call today. Amkor delivered solid results in the Q3, with both revenue and profitability at the high end of guidance. Revenue of $1.82 billion was up 25% sequentially, driven by the growth in advanced packaging, supporting the launch of premium-tier smartphones. Year to date, revenue of $4.8 billion was down 8% versus prior year, reflecting strong outperformance compared to an estimated semiconductor industry decline of over 15% in that same period. Although we observe improvements in certain areas like smartphones and PCs, overall macroeconomic conditions continue to dampen end-market demand and inventory levels remain elevated in some markets. Looking forward, we remain confident that the secular growth drivers for the industry remain in place, and that Amkor is well-positioned to outperform the industry with our strategic focus on advanced packaging and our broad geographic footprint. Now, let me review the dynamics in each of our end markets. Revenue within our communication end market has remained strong throughout this industry cycle, despite overall smartphone units projected to decline for the second year in a row. Q3 revenue set a new record, crossing the $1 billion mark with a sequential growth of 69% and a year-on-year growth of 3%. Amkor holds a leading position throughout premium-tier smartphones, building on our technology expertise and our proven track record as a trusted partner for co-developing innovative solutions and delivering operational excellence. Our advanced packaging technology supports a wide range of applications and functionality throughout the phone. With our advanced SiP technology for heterogeneous integration, we enable continuous innovation in form factor, functionality, and performance. Devices supporting 5G connectivity, RF, camera applications, touch and display controllers, memory and sensors, utilize advanced SiP technology, which drove the communication revenue to new record levels. Amkor's broad technology portfolio, scale, and focus on operational excellence are key drivers for further growing our footprint in premium-tier smartphones. Overall revenue from the automotive and industrial end market was flat sequentially as well as year-to-date. But year-to-date revenue for advanced packaging in this market is up 15% versus the same period last year. Although we have observed some near-term variability in certain applications with ongoing inventory control measures by certain customers, we expect that the trend of increasing semiconductor content per car will continue. Advanced driver assistance systems generate growth in multiple applications, from cameras and high-performance processors to sensors like radar and lidar. Growth in the EV segment is leading innovation in electrification, especially with the introduction of wide-bandgap materials like silicon carbide and gallium nitride. These materials enable improvements in power efficiency and charging infrastructure. As the leading automotive OSAT, we are strategically expanding our capacity and technology base for automotive solutions, notably in our factories in Europe, Japan, and Korea, in support of regional supply chains for critical automotive semiconductors. In these regions, we have built a pipeline for future growth by partnering with lead customers for new applications utilizing advanced technology portfolio. Mixed near-term dynamics impacted our revenue in the computing end market, resulting in a sequential decline of 14%. Strong demand for leading-edge advanced packaging technology, supporting high-performance computing devices for AI and other data center applications, was offset by product lifecycle changeovers and excess inventory corrections in more mature computing segments. Amkor is leading the offset supply chain with the deployment of 2.5D technologies, integrating high-bandwidth memory and ASIC on interposers, combined with modular attach on substrates. To support the strong demand now and in the future, we are optimizing line utilization and expect capacity to double by the end of the year. With our planned investments coming online by Q2 next year, we will have more than tripled our capacity compared to the Q2 of this year. Amkor is well-positioned to capitalize on opportunities in the computing market with our broad advanced packaging portfolio and established relationship with lead customers and foundries. Revenue within the consumer end market remains stable sequentially. The headwinds impacting this market continue to dampen demand. Reduced consumer spending, excess inventory, and product lifecycle changeovers in the IoT wearable market are still holding back a full recovery. Beyond this cycle, we expect the IoT wearable market will diversify and grow, and we are expanding capacity and investing in our advanced SiP technology to drive manufacturing scale and innovation. We are engaged with multiple customers across a diverse set of products, ranging from audio devices, smartwatches, and the emerging AR/VR experience. Within our new Vietnam location, we are qualifying new advanced SiP consumer products that we expect to ramp to high volume in the second half of 2024. In the Q3, our manufacturing organization demonstrated operational excellence and supply reliability to support a significant advanced packaging ramp within premium-tier smartphones. Geopolitical dynamics continue to impact the semiconductor supply chain. With our broad geographic footprint across multiple countries in Asia and in Europe, Amkor is uniquely positioned to support our customers with reliable and cost-effective manufacturing. We are actively working with our customers on programs that will support diversifying and de-risking their supply chains. In the U.S., we are progressing our discussions to establish an advanced packaging and test facility. We have submitted our pre-application for CHIPS funding and are actively working with customers and partners on long-term commitments to secure a U.S. manufacturing supply chain. On 11 October 2023, we held a grand opening ceremony for our Vietnam manufacturing site. The Bac Ninh campus further diversifies and strengthens our broad geographic footprint, and qualifications of new programs is progressing for advanced SiP and memory technology. Vietnam is an attractive location for our customers. We believe that the evolving local semiconductor ecosystem, coupled with Amkor's advanced packaging scale and expertise, will deliver a cost-effective and reliable manufacturing location. Now, let me turn to the Q4 outlook. With the ongoing uncertainties in the market, we are observing several customers taking a prudent position on inventory to close out the year. With this backdrop, we are expecting the Q4 to be softer than seasonal, with revenue of $1.675 billion at the midpoint of guidance. Although it is taking longer than anticipated to recover from this industry cycle, we believe that the secular growth drivers for the semiconductor industry remain in place. With our leading technology portfolio, scale, and global footprint, Amkor is poised to accelerate as the market recovers. With that, I will now turn the call over to Megan to provide more detailed financial information. Thank you, Giel, and good afternoon, everyone. Q3 revenue of $1.82 billion was up 25% sequentially, primarily driven by advanced packaging, supporting the launch of premium-tier smartphones. We achieved a notable highlight with communications growing to a quarterly record of over $1 billion. Given the increase in utilization and leverage in our financial model, our EPS more than doubled sequentially to $0.54. For the first three quarters of this year, Amkor's revenue is down 8% compared to 2022. Amkor's market share gains in communications, together with its diversified end market landscape and strategic focus on advanced packaging, is mitigating cyclical variability and providing the resilience needed to perform better than the industry. Gross margin for the Q3 was 15.5%, and gross profit increased over 50% sequentially to $283 million. With effective cost discipline, manufacturing costs, defined as cost of goods sold less materials, only increased 3% sequentially, allowing for significant flow-through to gross profit. Optimizing utilization is the key variable to improving profitability. Operating expenses for the Q3 came in as expected, at $116 million. Operating income more than doubled sequentially to $167 million, and operating margin expanded nearly 400 basis points to 9.1%. Net income for the Q3 was $133 million, resulting in EPS of $0.54. Q3 EBITDA was $333 million, and EBITDA margin was 18.3%. We ended the quarter with $1.2 billion of cash and short-term investments, and our total liquidity was $1.9 billion. Our total debt as of the end of the Q3 is $1.1 billion, and our debt-to-EBITDA ratio is 0.9x. Amkor has exercised cost and CapEx discipline during this cycle, and our strong balance sheet demonstrates financial strength. We continued to invest strategically in our global manufacturing footprint during the industry cycle, and we completed our new Vietnam factory on schedule. This state-of-the-art factory will support advanced packaging growth, offer our customers an alternative to diversify their global supply chain, and provide for capacity expansion when we exit the current cycle. Moving on to our Q4 outlook. We expect Q4 revenue to be $1.675 billion at the midpoint of guidance. We observe customers taking a cautious approach in Q4 to control inventory. Although we see improvement in some areas, overall macroeconomic conditions continue to dampen end market demand. We expect gross margin to be between 14% and 16%. We expect operating expenses to increase to around $120 million as we start to onboard our new Vietnam factory. We expect our full year effective tax rate to be around 17%. Q4 net income is expected to be between $80 million and $120 million, resulting in EPS of $0.32-$0.49. Our full-year CapEx target remains at $750 million. We have chosen to continue to invest strategically through this cycle to expand our global manufacturing footprint and strengthen our technology leadership position in advanced packaging to build foundations for future growth. Amkor recently celebrated its 55th anniversary and 25th year as a public company by ringing the Nasdaq closing bell. We are proud of our rich history and what we have accomplished over the past five decades. Our scale and leadership position in the OSAT market allows us to bring enabling technology to the world's leading semiconductor companies. With that, we will now open the call up for your questions. Operator? Thank you. And we will now conduct our question-and-answer session. If you would like to ask a question, please press star one on your telephone keypad. A confirmation tone will indicate that your line is in the question queue. You may press the star key followed by the number two, if you would like to remove your question from the queue. For participants using speaker equipment, it may be necessary to pick up your handset before pressing the star keys. One moment while we pull for questions. Our first question comes from Tom Diffely with D.A. Davidson. Please state your question. Yes, good afternoon. Thank you for the questions. First, I was curious if you could just compare a year ago, Q4 to this upcoming Q4 by end markets to tell us where the relative, you know, 10%-15% year-over-year weaknesses? Thanks, Tom, for the question. I can best refer to Megan to answer that. Megan, can you take this? Sure. Hi, Tom. Just to give you some color on end market dynamics for what we're seeing in Q4. With respect to communications, while we are showing a sequential decline off of a record Q3, that communications amount we're anticipating will be pretty much flat to the prior year Q4. So I would say holding very strong. Just a reminder, communications is, you know, depending upon the quarter, 40%-50% of our business. As it relates to the other markets, automotive, what we're expecting for Q4, while that is expected to be down year-over-year, when we also look at the full year, we are still continuing to see an increase in advanced packaging. So I think that's the notable aspect with respect to automotive, that despite some of that near-term softness in automotive, we are continuing to see strength in the advanced. From a computing perspective, that's had some mixed dynamics, with respect to Q4, again, down year-over-year. We are seeing for the full year, strong in the data center and infrastructure, where we really saw the most notable year-over-year was in the memory and storage component. And then last, consumer, that had the most significant year-over-year decline. That's two factors. One, that is being impacted, I would say, the most by the macroeconomic conditions, but also timing with respect to product life cycle changeovers. Okay, that's very helpful. So when you look at computing and consumer, two of the softer segments, how close do you think we're getting to a bottom here in terms of customers rationalizing their inventory levels? Yeah, let me try to take, that, Tom. Let's start with, with computing. I mean, as Megan already mentioned, in the computing segment, we see clearly two dynamics. One is on the data center, high-performance computing, specifically products for AI, utilizing 2.5D technologies. That is, showing a significant quarter-on-quarter growth, and we expect that to continue and support our overall, computing business. The rest of the computing market, we expect that, difficult to say whether we are at the bottom right now, but we, we see currently slight inventory corrections, but we are very positive for next year in the overall computing segment. For consumer, that depends on a few things here. One is, end market demand, very much dependent on recovery, for example, of the China market, macroeconomic elements. It's slightly difficult to predict. The market is still very uncertain broadly, but with improving consumer demand, we expect that there will be a recovery. Certainly, because we see that inventory in that market is being digested, not completely in balance yet, but definitely improving towards the end of the year. That creates a good basis for further growth next year. Great. And it sounded like from earlier comments that, even though there's, you know, ebbs and flows in each of these markets, you continue to invest capital expansion to the high ends of each of these markets. Is that correct? Yeah, that's, that's correct, Tom. I mean, definitely on the computing segment, we see that as a, as a long-term growth market for Amkor. We have a strong position in discriminating differentiating technology, like 2.5D, and also there's a roadmap going forward into, let's say, roadmap technologies there. We have a strong customer portfolio, so we continue to invest in that technology as well as in capacity. When it comes to the consumer market, that's driven, let's say, specifically also by the consumer wearables, and there in our Vietnam factory, we will launch, in the course of next year, the next generation wearable products, and we expect that creates a good basis for further growth. Okay. And maybe just quickly on that wearables market, is that gonna be new business for you, or is that just the evolution from the prior generation to the new generation that you've done? That specific product we're talking about is new. It's a new generation, and it's also a new business for us that we didn't have in 2023, and that we will have in 2024. Great. And then, sorry to take up your time, but the capacity expansion in 2.5D, it sounds like that business is currently under a pretty heavy ramp, and it's not till the Q2 of 2024 where it gets to, you know, kind of, 3x of last year's level? Yeah. I mean, that's a continuous ramp in that line. Of course, we have existing capacity there, Tom, and by debottlenecking that capacity and optimization of the utilization of the line, we are able to double capacity and output by the end of this year already. And then by further investments of incremental equipment, we further plan to, in total, triple our capacity towards the Q2 of 2024. Okay. And then when you look at the CapEx for the year, it sounds like you're maintaining the $750 million, but did the location of the spend change? Are you spending more on computing and less on other markets? Not really, Tom. You have to keep in mind that in that CapEx for this year, a significant part of that CapEx was allocated for our Vietnam facility. On the CapEx allocated for equipment expansion, I think that we already allocated, and that is as planned. Great. Well, I appreciate your time today. Thank you for the questions. Thank you. Thank you. Just a reminder, to ask a question, press star one, to remove yourself from the queue, press star two. Our next question comes from Randy Abrams with UBS. Please state your question. Yes, thank you. The first question actually is, following up on Tom's questions on the applications. I may have missed it, but could you discuss for auto, industrial, and mainstream, just the outlook for those applications to continue the correction where, or start to show signs of life on the more of the mainstream and mature auto and industrial products? Yeah, good, good question, Randy. Now let me try to give some color, and then Megan later on, give a little bit more detail here. In the automotive, we're clearly monitoring our position in advanced products in automotive because the emerging applications like ADAS, infotainment, in-car networking, are all supported by advanced silicon in combination with advanced packaging. So there we see continued growth. I mean, year-to-date growth in automotive advanced packaging was around 15% year-over-year. So that's a good signal that will continue to grow. On the more mature part of the automotive market, we clearly see that customers are very prudent on keeping inventory or maintaining inventory at an elevated level, certainly going into the end part of this year, and we saw some corrections in specific areas. In our view, it's not that the inventory is extremely elevated, but it was more a prudent correction towards the end of the year. We believe that going into next year, I think the overall supply chain for automotive is pretty much in balance. Good. On the margins, I'm curious on the incremental Q4. Actually, the sales are pulling back. It looks like the margin's holding up a bit again. Is there a mix change, just SiP relative to other part of business? Or, I think some of the efficiency measures on the non-material costs that held in the Q3, just if anything, relatively, supporting the margin to hold up in Q4. Okay, thanks, Randy. Megan, can take that. Yeah. Hi, Randy. Yes, so Q4, despite some decline, the margin is holding up nicely within our, you know, I would say, our financial model, even a bit better than that. There is some product mix in there, but I wouldn't say that that's dramatic. There's also a bit of currency benefit, in there, but overall, there's really good, I would say, cost management, where we're holding manufacturing costs down as that revenue declines. Okay. To follow-up on CapEx, curious just how it ends the year, for your overall CapEx, and then the initial take for next year with the advanced capacity expansions, if there'll be much lift and or for other investment areas in SIP, how you see the CapEx, for next year as well? Okay, Megan? Yeah. Hi, Randy. So from a CapEx perspective, you know, now that we have our Q4 guide, you can see we've really maintained that low teens capital intensity approach. As a reminder, and he'll mention, the significant portion of 2023 was dedicated to construction, so we did pull back significantly on the equipment and capability. As far as 2024 goes, it's too early for us to give a guide on 2024 CapEx. We would, as we have now, continue to focus on the advanced packaging elements of our investment. And I would say, just as a guideline, we would anticipate, you know, that we wouldn't go outside of our rule of thumb of low teens capital intensity. Great. Actually, I wanna follow-up on the high performance compute ramp up to double and then triple or more than triple by middle of next year. Two questions. One, the profitability and returns on this advanced business, and then the assurance on that capacity where you have the foundry also doubling capacity, how you see assurance or just the momentum once you triple it, if you see trends and activity for customers broadening out to continue to grow that business. Yeah, Randy, I think we feel fairly comfortable that we can utilize the capacity that we bring in place. I mean, we work with customers as well as with, for example, parties in the supply chain that provide elements like interposers to make sure that we have demand and supply lined up. I mean, there is also a broadening of our customer base in that technology, so we're fairly confident that into 2024 we can fill that capacity. The returns, like, normally for advanced, I guess, capital intensity higher. Yeah. But how do you see, like, return on investment and profitability? It's still ramping and takes time to get scale- and margin accretive as you ramp it? Yes. I mean, we already have a capacity in place since 2017, so we're now in the third generation of products, where we provide an end-to-end solution. So that means both population of the interposer as well as the on-substrate part. If we invest in that technology, the majority of that equipment is fungible with a standard bumping line, so the utilization can be warranted. And even if there are swings on the 2.5D sides, we believe that since the fungibility of the equipment, we can utilize that with a very solid return on investment in the individual equipment. So it is broadly fungible, and you could label it as investment in wafer-level capacities in the broader sense of the word. One final question on it. The interposer, it's all been silicon, but industry is looking at trying to find a bit less expensive or different options. Do you see much interest in activity for redistribution interposer? And would that be a value shift or opportunity, and are you investing toward that if you're seeing that trend? Yes, we're seeing that trend from an interposer or silicon interposer base into an RDL-level interposer. And we're working with several customers on initial, I would say, pilot production for that technology. I mean, in general, the industry is conservative. Let's say, the maturing of the interposer-based technologies, certainly the yield levels is extremely important because the combination of high bandwidth memory and expensive silicon requires very high yield levels, and that takes a steep learning curve. But on the other hand, the RDL-based technology is emerging, and we're preparing that. And by the way, the installed capacity that we have in place is, to some extent or to a very large extent, fungible with between RDL and interposer-based technology. Okay, great. Thank you, Giel, Megan. Thank you. Our next question comes from Steve Barger with KeyBanc Capital Markets. Please state your question. Hey, thanks. I'm not as familiar with Amkor, so I appreciate you letting me ask a question. I'm not looking for near-term guidance, like, meaning this quarter or 2024. But can you talk about how you see longer-term growth rates for advanced packaging individually across your smartphone exposure, your automotive business, and then maybe AI? Yeah. Let me try to give you a bit of color there, Steve. I mean, we believe that the markets that we are serving and catering for, specifically for advanced packaging, will grow at an above average rate if we compare that to regular semiconductor growth rates expected. A couple of key drivers there. You know, for Amkor specifically, I think if we take our core strategic pillars, it is diversification of our supply chain, where we support customers in with semiconductor supply chains in jurisdictions where they like to be. Like, for example, in Europe, supporting the European automotive industry, or in Japan, or now, for example, in Vietnam, where we offer customers an alternative supply chain vis-a-vis their China manufacturing. That will continue. We believe that Amkor is better positioned than the industry there, and that will drive incremental growth. There is also growth in advanced packaging because, you know, the growth drivers in the industry, be it 5G or 6G, automotive, IoT, or high-performance computing, all that, that growth will be supported by advanced packaging. And there we are positioned as a leader. We're engaged with the leaders in that industry, and we believe that will drive growth growing forward. And then an additional element there is that the relative outsource potential of the industry volumes is increasing. So where companies in the past, for example, in automotive, to a large extent, were vertically integrated, we see that for advanced packaging, more and more, outsourcing takes place, both on the silicon side as well as on the packaging side. So increased outsourcing, solid geopolitical footprint, and that combined with engaged in the lead segments of the market, will drive growth for Amkor. I appreciate that detail. And just to follow-up, I think people expect very high growth rates for advanced packaging around AI, for obvious reasons. But will packaging content gains in smartphone and auto result in growth rates that can match that? Or how would you rank those kind of relative to each other? Well, specifically in the, Steve, in the high-end part of smartphone, in the premium tier smartphone, we still continue to see significant innovation. I mean, you refer to AI adoption, specifically in the data centers, but on the edge, and then referring to smartphones, we also expect that in at edge devices like smartphones, there is incremental innovation to adopt AI functionality. That will drive a new generation and the next generation of, for example, application processors. And that, and again, will drive advanced packaging. So there is a, there's a kick-on effect also to edge devices like smartphones. Same question for auto. Do you expect that the content gains there will drive, you know, significantly above average growth relative to the semi cycle itself? Yes. I mean, we believe that automotive actually, from our analysis, and that's also in, referring to industry data, is that the automotive semiconductor market is the fastest-growing market going forward in the next couple of years. We're well positioned there, and, you know, if you take applications like ADAS, in-car networking, connectivity, that drives growth, and not only on the processing side, but also on the sensor side, for example, and that helps the automotive market moving forward. And on top of that, we see a proliferation of these features from, let's say, high-end part of the automotive market into the more mainstream mid-segment and low segment of the market, because multiple of these features are becoming mandatory to be deployed in the car industry. That's great, and just, just one last one for me. When you talk about an AI-enabled smartphone or an edge smartphone, what's the timing of something like that? Is that 2024, 2025, 2026? Well, you know, if I can only refer to the recent announcement of the biggest, let's say, smartphone chip company in the U.S., and you will see that the next generation of that high-end processors already has, let's say, an AI core included in that device. So we expect that to be 2024-2025 range, this functionality to enter into the smartphones. That's great. Thanks very much for the time. Okay. Thanks, Steve. Thank you. At this time, I'm showing no further questions. I would like to turn the call back over to Giel for closing remarks. Let me recap the key messages. We delivered solid Q3 results at the high end of guidance, with revenue growing 25% sequentially to $1.82 billion, and EPS more than doubling to $0.54. We are expecting Q4 revenue of $1.675 billion at the midpoint of guidance. Through this cycle, Amkor continued to invest in a diversified, large-scale manufacturing base to support a secure and reliable global semiconductor supply chain. In August, Amkor had the opportunity to ring the Nasdaq closing bell in celebration of the company's legacy and success. We celebrated two significant milestones, our 55th anniversary and our 25th anniversary as a publicly traded company. With our leadership in advanced packaging, our broad geographic footprint, and diversified exposure to industry mega trends, we are poised to outperform the semiconductor market and accelerate out of this cycle. Thank you for joining the call today. Thank you. We conclude today's conference. All parties may now disconnect. Have a good day. Thank you.