Greetings and welcome to the Cummins Inc F irst Quarter 2021 Earnings Conference Call. At this time, all participants are in a listen-only mode. A question-and-answer session will follow the formal presentation. If you would like to ask a question at that time, please press star one on your telephone keypad. If anyone should require operator assistance during the conference, please press star zero on your telephone keypad. As a reminder, this conference is being recorded. It is now my pleasure to introduce your host, Jack Kienzler, Executive Director of Investor Relations. Thank you. You may begin. Thank you. Good morning, everyone, and welcome to our teleconference today to discuss Cummins results for the first quarter of 2021. Participating with me today are our Chairman and Chief Executive Officer, Tom Linebarger; our President and Chief Operating Officer, Jennifer Rumsey, and our Chief Financial Officer, Mark Smith. We will all be available for your questions at the end of the teleconference. Before we start, please note that some of the information that you will hear or be given today will consist of forward-looking statements within the meaning of the Securities Exchange Act of 1934. Such statements express our forecasts, expectations, hopes, beliefs, and intentions on strategies regarding the future. Our actual future results could differ materially from those projected in such forward-looking statements because of a number of risks and uncertainties. More information regarding such risks and uncertainties is available in the forward-looking disclosure statement in the slide deck and our filings with the Securities and Exchange Commission, particularly the risk factors section of our most recently filed annual report on Form 10-K and any subsequently filed quarterly reports on Form 10-Q. During the course of this call, we will be discussing certain non-GAAP financial measures, and we refer you to our website for the reconciliation of those measures to GAAP financial measures. Our press release with a copy of the financial statements and a copy of today's webcast presentation are available on our website at www.cummins.com under the heading of Investors and Media. With that out of the way, we will begin with our Chairman and CEO, Tom Linebarger. Thank you, Jack. Good morning, everyone. I'll start with a summary of our first quarter financial results, and then I'll talk about our sales and end-market trends by region, and finish with a discussion of our outlook for 2021. Mark will then take you through more details of both our first quarter financial performance and our forecast for this year. Demand accelerated in the first quarter as the global economy continued to improve, driving strong sales growth across most businesses and regions and resulting in solid profitability. The strength and breadth of the rebound in demand has surpassed our original expectations, and we've raised our full-year outlook. We were particularly encouraged by the significant growth of our components business in the first quarter, which is now clearly capturing the benefits of the increasing content we are able to offer our customers and partners as they move towards more complex and stringent emissions regulations in China and India. This business is also benefiting from its global leadership position as truck markets recover. While the strong demand across our end markets generated strong revenues, the pace of recovery has placed a strain on global supply chains, leading to increased costs and significant challenges in fulfilling all of our customers' orders. The shortage of key components such as semiconductor chips has been the primary challenge, with adverse weather conditions, labor shortages in some regions, and bottlenecks in global logistics further adding to order backlogs. The ability to supply is our key focus now, and we are doing everything we can to mitigate the impact. I want to thank our global employees, especially those in our supply chain and manufacturing operations, and our committed suppliers for their extraordinary efforts to manage through these challenges and supply our customers. We are optimistic that the situation will improve in the second half of the year. However, we expect demand to remain strong, making it difficult for the supply chain to catch up unless the industry extends the order cycle. Before moving to our first quarter financial performance, I wanted to take a moment to highlight a few important strategic partnerships that we announced during the first quarter. These new and expanded partnerships are consistent with our strategy to deepen our relationships with key customers in existing segments while continuing to invest in new and alternative power solutions. As the leading independent global power solutions provider, Cummins is committed to ensuring our customers have the right solution anywhere and everywhere our customers operate by offering them a broad range of power solutions from advanced diesel, near-zero natural gas, fully electric, hydrogen, and other technologies. In February, we announced a global strategic partnership for medium-duty engine systems with Daimler Truck & Bus. As part of the partnership, Cummins will invest in the further development and global production of medium-duty engines and components for Daimler Trucks & Buses. The partnership builds on our strong existing relationship with Daimler's North American brands. In North America, Daimler will replace their vertically integrated engines with Cummins engines ahead of CARB regulations in 2024 and EPA regulations in 2027. In addition, Cummins engines will be used in Daimler medium-duty chassis in Europe, Brazil, and India, coinciding with next-generation emissions regulations in those regions. In the future, global medium-duty engine systems for Daimler Trucks & Buses all over the world will be provided by Cummins. We also announced a global medium-duty partnership and advanced engineering collaboration with Isuzu, building upon the Isuzu Cummins Power Partnership formed in 2019. Isuzu Trucks powered by Cummins B6.7 diesel platform engines will be introduced in North America first in 2021 and in Japan, Southeast Asia, and other regions at later dates. Finally, in March, we announced a medium-duty engine offering with Hino, where Cummins 6.7 and L9 engines will be available on Hino trucks in North America by the end of this year. In addition to the above announcements, we continue to investigate areas in which we can strategically collaborate with global OEMs across a number of regions, technologies, and power solutions. We believe these collaborations will not only allow us to significantly grow our core engine and components businesses, but will also further strengthen the important relationships we have with a number of OEMs and end users. These relationships, coupled with our application expertise and broad sales and service channel, will position us well to manage the transition from internal combustion engines to lower-carbon hybrids and eventually to zero-emissions products in the future. Now I will comment on the overall company performance for the first quarter of 2021, and we'll cover some of our key markets, starting with North America before moving on to our largest international markets. Revenues for the first quarter of 2021 were $6.1 billion, an increase of 22% compared to the first quarter of 2020. EBITDA was $980 million, or 16.1% compared to $846 million, or 16.9% a year ago. EBITDA dollars increased as a result of stronger sales and record joint venture income, partially offset by significantly higher premium freight and other costs associated with supply chain disruptions, as well as higher variable compensation expense. Our profitability, especially in the engine business, was impacted more than expected by supply chain disruptions due to the extraordinary measures we had to take to meet customer commitments. Our first quarter revenues in North America grew 7% to $3.3 billion, driven by higher industry build rates of heavy-duty trucks and light-duty pickups. Industry production of heavy-duty trucks in the first quarter was 60,000 units, an increase of 15% from 2020 levels, while our heavy-duty unit sales were 23,000 units, an increase of 25% from 2020. Industry production of medium-duty trucks was 32,000 units in the first quarter of 2021, an increase of 2% from 2020, while our unit sales were 27,000 units, an increase of 5% from 2020. We shipped 42,000 engines to Stellantis for use in their RAM pickups in the first quarter of 2021, an increase of 49% from the 2020 level. Revenues for power generation grew by 10% due to higher demand in recreational vehicle and data center markets. Our international revenues increased by 45% in the first quarter of 2021 compared to a year ago. First quarter revenues in China, including joint ventures, were $2.1 billion, an increase of 95% due to the higher sales in on-highway and construction markets. Industry demand for medium and heavy-duty trucks in China was 587,000 units, an increase of 95% driven by increased NS V pre-buy ahead of a broader NS VI implementation in July of this year and an effort to secure inventory amid supply chain concerns. Our sales in units, including joint ventures, were 91,000 units, or an increase of 146%. The light-duty market in China increased 73% from 2020 levels to 581,000 units, while our units sold, including joint ventures, were 45,000 units, an increase of 63%. Industry demand for excavators set another quarterly record of 127,000 units in the first quarter, an increase of 84% from last year. Our units sold were 21,800 units, an increase of 107% as our customers continued to gain market share. Demand for power generation equipment in China increased 41% in the first quarter, driven by growth in data center markets and higher demand for standby power. First quarter revenues in India, including joint ventures, were $577 million, an increase of 82% from the first quarter a year ago. Industry truck production increased 63%, while our shipments increased 88%, driven by better penetration with our JV partner as the heavy-duty commercial vehicle segment recovered from a year ago. Demand for power generation and construction equipment rebounded strongly in the first quarter as economic activity continued to improve. In Brazil, our revenues increased 31%, driven by increased demand in most end markets. Let me provide our outlook for 2021, including some comments on individual regions and end markets. We have raised our forecast for total company revenues for 2021 to be up 20%-24% compared to our prior guidance of up 10% at the midpoint. This guidance reflects a stronger outlook in most markets and regions. We've raised our forecast for industry production of heavy-duty trucks in North America to 264,000 units, up 45% compared to 2020 and above our prior guidance of 255,000 units. Despite the supply chain constraints our industry is experiencing, demand has continued to outpace our expectations from the beginning of the year. In the medium-duty truck market, we are increasing our forecast for industry production to 140,000 units, up 35% year-over-year and above our prior guidance of 125,000 units. We expect our engine shipments for pickup trucks in North America to be up 15% compared to 2020, an increase of 10% from our expectations three months ago. In China, we continue to expect domestic on-highway demand to decline from record levels a year ago despite the strong start to the year. We are increasing our outlook for medium and heavy-duty truck market demand to 1.5 million units compared to our expectations of 1.3 million units at the beginning of the year. This would still represent a 15% decline from 2020. In the light-duty truck market, we continue to expect a 7% reduction in demand in line with our previous guidance. We now expect industry sales of excavators to decline 10% from the record levels achieved in 2020. This compares to our prior guidance of down 20%. In India, we continue to project broad recovery versus 2020. We anticipate industry demand for trucks to be up 90% compared to levels experienced in 2020, and our other businesses are showing promising growth due to continued infrastructure investment. We do anticipate lower demand in all end markets in the second quarter due to new lockdowns as a result of an increase in COVID-19 cases, and we're monitoring the events on the ground closely. Given the rapid increase in COVID cases in India, we are very concerned about the health and safety of our employees and those of our suppliers and partners. We are continuing to operate all of our manufacturing facilities but with robust safety measures in place. In Brazil, we continue to forecast truck production to increase 25% in 2021. We now expect demand for mining engines to increase 45% in 2021, up from our expectation of 15% three months ago, and that's due to continued strength in commodity prices. Demand for power generation equipment increased 18% in the first quarter, and we continue to see strong order activity in most geographies and segments. We are now expecting global power generation revenues to increase 15% compared to our previous forecast of up 5%, primarily driven by data center and recreational vehicle markets. In summary, we are increasing our revenue outlook for the year, with year-over-year growth expected to be in most major regions except China. Demand in China remained very strong in the first quarter, but we do anticipate a weaker second half of the year, driven in part by the transition to the new National Standard VI emissions regulations for trucks beginning in July. We are increasing our EBITDA guidance range from 15.5%-16% compared to 15%-15.5% at the beginning of the year due to stronger volumes and improved outlook for JV income, which we expect to more than offset significantly higher supply chain costs. During the quarter, we returned $615 million to shareholders in the form of dividends and share repurchases, consistent with our plan to return 75% of operating cash flow to shareholders for the year. We continue to take necessary precautions at all of our facilities to mitigate the spread of COVID-19, and our focus remains on the health and safety of our employees. We are optimistic that continued vaccination distribution globally will reduce the impact of the virus in the second half of the year, but there is still a risk of an increase in cases somewhere in the world that could result in lower customer demand, additional facility shutdowns, or additional supply chain constraints in the future. Having managed through an extremely challenging 2020 and a dramatic ramp-up in the first quarter of 2021, Cummins is in a strong position. We have secured some important new business wins in our engine and components businesses, and at the same time, we continue to invest in future growth, bringing new technologies to customers and generating strong returns for shareholders. Thank you for your time today, and now let me turn it over to Mark. Thank you, Tom, and good morning, everyone. There are four key takeaways from our first quarter results. First, we saw continued recovery in demand in most major end markets and regions, resulting in record revenues for the first quarter and a much stronger full-year outlook. Second, the elevated level of demand across our markets has strained global supply chains in our industry, resulting in higher premium freight costs and other associated inefficiencies higher than we anticipated at the start of the year. The strength of demand, order backlogs, and lack of inventory in the pipeline indicate that some level of elevated costs are likely to continue in the coming quarters. Despite the cost headwinds associated with a tight supply chain, we delivered solid profitability and cash flows in the first quarter and have raised significantly our outlook for the full year. Finally, we returned $615 million to shareholders through cash dividends and share repurchases, consistent with our plan to return 75% of operating cash flow to shareholders this year. Now let me go into more details on the first quarter. First quarter revenues were $6.1 billion, an increase of 22% from a year ago. Sales in North America grew 7%, and international revenues rose 45%. Currency movements positively impacted revenues by around 1%. Earnings before interest, taxes, depreciation, amortization, or EBITDA were $980 million, or 16.1% of sales for the quarter, compared to $846 million, or 16.9% of sales a year ago. EBITDA dollars increased due to the benefits of higher volumes and stronger earnings from joint ventures in China. EBITDA percent declined primarily due to a weaker gross margin percent. Gross margin of $1.5 billion, or 24.4% of sales, increased by $192 million but declined as a percent of sales by 140 basis points. First quarter gross margins included approximately $105 million of additional freight, labor, and logistics costs associated with disruptions across our supply chain. We expect elevated costs to continue at least through the second quarter and have incorporated additional costs into our full-year guidance. Partially offsetting these supply chain efficiencies was a $44 million positive change in estimate in our product coverage expense, reflecting lower costs across several products, primarily in our components and power systems businesses. Selling general and administrative expenses increased by $28 million, and our research expenses increased by $22 million, and both increased primarily due to higher variable compensation expense. In 2020, our variable compensation plan worked as desired, flexing down due to the weaker outlook associated with the impact of the global pandemic. In 2021, variable compensation expenses are expected to be higher for the company and all individual segments, consistent with our forecast for improved full-year profitability this year. Joint venture income was a record $166 million in the first quarter, up from $129 million a year ago. Continued strong demand for trucks and construction equipment in China led to the strong performance. As a reminder, joint venture income in the first quarter last year included a $37 million benefit related to changes in tax law in India and income of $18 million from a technical fee, also in India, that did not repeat this year. Adjusting for these one-time items in 2020 underscores just how strong the earnings growth was in the first quarter from our joint ventures. Other income decreased by $46 million from a year ago, primarily driven by mark-to-market losses of $32 million on the investments that underpin our non-qualified benefit plans, and this compares to a $17 million mark-to-market gain in the first quarter last year. The mark-to-market losses were recorded within eliminations and not allocated to our operating segments. Net earnings for the quarter were $603 million, or $4.07 per diluted share, compared to $511 million, or $3.41 a year ago. The increase is primarily due to stronger after-tax earnings and a lower share count as a result of those share repurchase activity. The effective tax rate in the quarter was 22%. Operating cash flow in the quarter was an inflow of $339 million compared to $379 million a year ago. Stronger earnings were more than offset by an increase in working capital associated with our revenue growth this year. I'll now comment on segment performance and our revised guidance for 2021. For the engine segment, first quarter revenues increased by 14% from a year ago, driven by growth in demand for trucks in the U.S. and construction equipment in China. EBITDA decreased from 16.9% to 14.4% of sales. The engine business bore the brunt of the premium freight costs and other associated efficiencies arising from supply chain disruptions. We now expect full-year revenues to be up 23%-27%, an increase from our prior guidance of up 12%, primarily driven by stronger demand in North American truck and global construction markets. We have increased our forecast for EBITDA margins to be in the range of 14.5%-15%, as we anticipate stronger volumes and higher than previously expected joint venture income will more than offset the additional supply chain costs. In the Distribution segment, revenues increased 1% from a year ago in the first quarter. EBITDA was flat as a percent of sales at 8.7% as the benefits of our North American transformation work and improvements in some of our international businesses, somewhat offset by weaker parts sales resulting from supply chain challenges. Underlying demand for parts remained strong. We have maintained our 2021 outlook for distribution revenues to be up 6%-10%, and we now expect EBITDA to be 9% at the midpoint of our guidance, below our prior guidance of 10.1% due to a reduced outlook for parts and stronger demand for power generation equipment and other engine sales. Components revenues increased 43% in the first quarter, driven by stronger demand for trucks in North America, China, India, and Europe. EBITDA increased from 18.6% of sales to 19.6% due to the benefit from stronger sales and lower product coverage costs. 2021, we now expect components revenues to increase 30%-34%, up from our prior guidance of up 11%, and we've raised our forecast for EBITDA margins to 17% at the midpoint, up from 14.9%. In power systems, revenues increased 16% in the first quarter, driven by stronger global demand for power generation and mining equipment. EBITDA increased from 8.7%-12.3% of sales, primarily due to the benefits of higher volumes and lower product coverage costs. We now expect power systems revenues to be up 18% at the midpoint compared to our prior guidance of up 9%. EBITDA margins are projected to be in the range of 11%-11.5% of sales, up from our prior guidance of 10.6% due primarily to the stronger sales outlook and lower costs of quality. In the New Power segment, revenues increased to $35 million, up 250% due to stronger sales of battery electric systems, fuel cells, and electrolyzers. EBITDA losses for the quarter were $51 million, in line with our expectations as we continue to invest in new products and scale up ahead of widespread adoption of the new technologies. For the full year, we're maintaining our new power revenue outlook at the $110 million-$130 million, and we also expect net expense to be in the range of $200 million at the midpoint of our guidance. The net impact of the changes to individual segment projections is that we forecast total company revenues to be up 20%-24% in 2021, up from our prior guidance of up 10%. We're raising our forecast for company EBITDA margins to be between 15.5% and 16% compared to our previous guidance of 15%-15.5%. This increase is primarily driven by the stronger sales outlook, which we anticipate will drive incremental earnings that more than offset the increased supply chain costs. We now expect earnings from joint ventures to be down 5% this year compared to our prior forecast of down 25%-30%. Continued strength in China truck and construction markets, especially in the first half of the year, is the primary reason for the increase in our forecast. We currently project that the first quarter will mark the high point for joint venture earnings this year, with results expected to ease in subsequent quarters, and particularly the second half of the year post-adoption of the new National Standard VI on highway emissions regulations in China in July. We're projecting our effective tax rate to be 20%-25% this year, 22.5% excluding any discrete items. Capital expenditures were $87 million in the quarter, up from $75 million a year ago. We expect that our 2021 capital investments will be in the range of $725 million-$775 million, unchanged from prior guidance. As Tom mentioned, we return $615 million to shareholders through dividends and share repurchase, in line with our plan to return 75% of operating cash flow this year. To summarize, we delivered strong results in the first quarter that have increased both our sales and profitability outlook for the year. Supply chain tightness, along with the ongoing impact of COVID-19, will continue to present challenges in the coming weeks and months. I want to thank all of our employees for their commitment to support our customers through these challenges and deliver strong full-year financial results. We will continue to prioritize investing in the products and technologies that will drive profitable growth and return capital to shareholders while improving the day-to-day performance of the company. Thank you for your interest today, and let me turn it back now to Jack. Thanks, Mark. Out of consideration to others on the call, I would ask that you limit yourselves to one question and a related follow-up, and if you have additional questions, please rejoin the queue. Operator, we are now ready for our first question. Thank you. As a reminder, if you would like to ask a question at this time, please press star one on your telephone keypad. The confirmation tone will indicate that your line is in the question queue. You may press star two to remove your question from the queue. For participants using speaker equipment, it may be necessary to pick-up your handset before pressing the star keys. Our first question is coming from the line of Ann Duignan with JPMorgan. Please proceed with your question. Hi. Good morning, and thank you. Could you just provide more color on your change in guidance on the components business? It does sound like most of the change has been driven by a higher-than-expected pre-buy in China. Am I reading too much into that? My follow-up is, based on that, could you provide some color on the cadence of your revenue and profitability over the next couple of quarters, just balancing the pre-buy versus India and then what the back half might look like as impact costs dissipate, potentially? Thank you. Thanks, Ann. This is Mark. I'll take the first pass at that. We're seeing a rising outlook for most end markets that are going to benefit the components business, which has a leadership position in global markets, so it's not just China. You're right. China's definitely helped that business, where we have consolidated operations. It's benefited our results. That's primarily in the first half of the year. The impact of that strength in China is expected to ease in subsequent quarters and the second half of the year. I'll come back and talk about the overall joint venture income for the company rather than just components in a moment. Yes, that stronger volume, the components business doing a good job of converting that to additional profitability. The second thing is the components business did benefit from lower quality costs and a positive change in estimate in our product coverage or warranty expense in the first quarter, which boosted the results a little bit, which is why the full-year margin's a little bit below the first quarter level of performance. Yeah. India was an important contributor. We had consolidated revenues of around about $600 million in China and India combined for the components business in the first quarter, so kind of an annualized $2.5 billion business. We expect that could drop from that rate in the second half of the year by as much as 40%, depending on the impact of demand. On the other hand, supply chain permitting, we're expecting, obviously, the North America demand to continue to improve. If I now circle back up to the total company picture, really, the story's the same on China that we expect a significant drop-off in the second half of the year. We don't have great visibility into that. That's an assumption right now. Q1 remained stronger than we'd anticipated three months ago. There are some signs of concern. There's elevated inventory levels. Obviously, the price of trucks goes up with the introduction of the new emissions regulations. We've baked in kind of a 40%-50% drop-off in the earnings run rate quarterly in the second half of the year from where we are today. Hopefully, that wraps up the big picture on China. Thank you. Our next question comes from Jerry Revich with Goldman Sachs. Please proceed with your question. Hi. Good morning, everyone. Morning, Jerry. Tom, congratulations on the medium-duty engine wins announced over the course of the quarter. I'm wondering, can you talk about how the collaboration discussions are going with some existing medium-duty engine customers for providing more services on the electrification side? To what extent does that help the discussions? Can you just give us some context on whether there's any impact as a result of working closer here? Thanks. Yeah. Thanks, Jerry. Here's what I would say is, broadly speaking, as we've said in previous calls, we are talking now to every OEM about their technology requirements going from today all the way through the eventual transition to zero carbon. Those technologies include diesel and more advanced versions of diesel, natural gas, hybrid, electric, and fuel cell. As I've also said before, for many of them, the diesel side looks less viable from an investment point of view just because their volumes are relatively smaller than ours in most ranges, but certainly in mid-range. That's, I think, why you're seeing the announcements you're seeing. In addition, though, we are offering them the other technologies, including transition technologies, to help them figure out how to get from where they are now to a place that's a viable zero-carbon solution down the road. I would say that all those conversations are all going on, but it's difficult now for OEMs to understand what the timing of those transitions look like and exactly what their technology approach wants to be, just as it is for most market watchers. It's hard because the viability of those technologies in terms of cost depends on either carbon tax or regulations or something else coming into play because still, diesel is quite a bit cheaper than those other solutions today, and of course, it's providing improved fuel economy with every generation. Yeah, those conversations, as you suggest, are going on, but I would just say that for the most part, we're doing work with folks, but what exactly their plans are going to be and what role we're going to play in those future technologies is still being talked about, whereas the diesel stuff is moving now because they have to make investment choices today. Do I invest in the new platform, or do I have someone else invest? Okay. Thank you. Tom, on the light-duty diesel side, can you talk about your level of optimism about similar opportunities that we're seeing falling in your favor on the medium-duty side? What's your level of optimism about the opportunities set in light-duty? I would say if you're thinking about passenger cars and that sort of thing, my view is that there are limited opportunities there. It's not zero. We are having conversations with people, but it's less, and I think primarily because I think most passenger car companies see investing in new diesel platforms as probably not a good investment. They're thinking themselves that they're trying to invest more for a nearer-term future of conversion to hybrids or electric vehicles. Again, that isn't true across the board. I want to be clear. Pickup trucks and some of the others are the transition's less clear, but even there, I'd say the movement is more that direction than it is towards, "Let me think about what my next diesel platform is. Thank you. Thanks, Jerry. Thank you. The next question comes from the line of Ross Gilardi with Bank of America. Please proceed with your question. Good morning, guys. I just wanted to expand on Jerry's question maybe the other way. What about heavy-duty engines and just the likelihood of Daimler outsourcing its heavy-duty diesel engines too? On the medium-duty side, have you said how much additional content you will potentially get on the component side, or is that still to be determined? Let me first address the heavy-duty question, Ross. Thanks for that. On heavy-duty, of course, what Daimler's decision would be on that would be best to ask them, not us, but I would just say that we're having conversations on heavy-duty with a number of partners. As you guessed, the volume discussion that I mentioned earlier about trying to invest for limited volume, it's much more dramatic in medium-duty. The relative volume of our customers versus ours is dramatically different in mid-range. It is different in heavy-duty too. We clearly have a larger position, but it's not as big a difference. Those conversations are likely to take longer, and it's not as easy a call for an OEM on heavy-duty as it is on medium-duty. That said, they still have platform investments to make, and as do we, and so the question is how many of us want to make those. I do expect more partnerships to occur on heavy-duty. It's just that those conversations are still ongoing. Let me just talk a little bit on the components business. This is Jennifer. Probably don't need to identify myself. I'm the only female on the call. Of course, our strategy with our partners has been to offer engines where that's what they would like us to supply, and when we don't supply engines, we often supply components to them from our components business. When we look at these new partnerships on the engine side, in some cases, we have the components business already for some of our other components, so it will provide an incremental growth opportunity for us. Of course, we also extend those partnership conversations on components where they continue to do their own engine. We do see good growth opportunity as a result of these deeper partnerships on both the engine and component side. Thank you. Just more broadly, do you think all the supply chain concerns out there, plus perhaps some of the controversies on some of the newer entrants to the truck markets, is shifting customer interest on EV and hydrogen more towards some of the incumbents like yourselves that have established and diversified manufacturing capability around the world? I would say, Ross, it's hard to say. Here's what I think, is that not surprisingly, some of the new companies that are starting up that are pure plays in low-carbon technologies are having trouble demonstrating a business model that works now. That's not surprising because the volume's really low. I mean, people know the transitions are coming at some point, but they're not viable without regs or some other kind of carbon tax or something that moves the needle, so they're struggling to show a business model. That shouldn't surprise anyone. That's how it is. Our view is that we're well-positioned to provide people with solutions today, solutions that are kind of transition kind of solutions, natural gas and hybrid, then final solutions. We hope that proves to be the best answer, and we think investors do well to find companies like us who can make the whole lap. Again, I think the timing of how that's going to work and whether supply chain is changing people's mind or it's just the business models that don't look viable, I'm not sure, but I noticed the same thing you do, that there is volatility both in the capital flows and the values of these companies and also in their perception of success, and I'm sure they'll have a brighter day as well as they have a cloudy day today. We just think we have the most robust solution that comes. Thanks very much. As we always do, we're communicating transparently with our customers and doing everything we can to meet their demand even with all the supply challenges, I think continuing to do that is an important part of maintaining strong relationships. Thank you. Thanks, Ross. Thank you. Our next question comes from Rob Wertheimer with Melius Research. Please proceed with your question. How do you count on my question after the different strategies? Just within Power Systems, Power Gen, is that recovery broad-based, or is it a little bit data center focused? I don't know if data centers have probably been climbing in their relative mix. Just on the rest of the business, and mining seems like a pretty strong recovery. Is there anything particular to call out? We all know commodity prices are strong. I don't know if there's anything one-off there. Thank you. Hi, Rob. It's Mark. I would say, yes, data centers are the enduring secular growth stream, but we have seen a broader recovery in power gen demand this quarter versus a year ago, U.S., China, India, and Asia-Pacific are the regions, and certainly within the U.S., China, data centers are an important element of that, but it's a little bit broader. Then in mining, most of our growth and engine sales are originating in international markets right now. Yeah. Definitely, the outlook has improved. The confidence has improved a little bit on mining, yeah. Thanks. Thank you. Our next question is coming from the line of Steven Fisher with UBS. Please proceed with your question. Thanks. Good morning, guys. Wondering what you have assumed for freight and other costs in the next few quarters relative to that $105 million that you incurred in the first quarter and how that then translates to the cadence of the engine margins over the course of the year. Just wondering if that maybe gets a little bit weaker before it gets a little bit better. This is Jennifer Rumsey. Thanks for the question. We saw higher-than-anticipated premium freight in Q1 just as we dealt with growing revenue and just trying to keep up in the supply chain and various disruptions. We do expect that that's going to improve. We ran 1.7% of sales in Q1. We think that'll improve as we go into Q2, down from around $105 million to more like $60 million, then continue to improve over the course of the year. We will continue to see disruptions that are higher than typical just as there's a backorder. We're trying to kind of chase the situation up. I'll add that the situation in India is a bit of uncertainty for us right now and how that might impact both our local markets there as well as the export from India of our own engines and other components in the supply chain. On the engine business margin, Steve, there are two swing factors. One, yes, we've assumed some improvement, particularly in the second half and some of these excess costs, and not all of them, but most of them are showing up in the engine business. Measured against that is the expected decline in China truck demand in particular, which will impact the joint venture earnings. There are two moving parts, but the net says there's not a dramatic change quarter to quarter, but those are the two big assumptions that mostly play out in a different way in the second half of the year. Okay. Just curious how a bigger picture, how you think about how natural gas fits into the picture long-term, and how does that drive the investments you're making in natural gas today? Yeah. We have a leading position today in North America with natural gas products, and our engines in the U.S. are already certified to meet the CARB 2024 ultra-low NOx regulation, that may create some additional demand there. We also are offering natural gas products in other parts of the world, we think it's a bridge solution, we'll plan to continue to offer products to meet our customers' needs as a bridge between diesel engines and a future zero-carbon solution. Steve, I mentioned in my remarks that these transition solutions are important because the zero-carbon solutions that we're working on, those are the eventual solutions that will win the day, but eventual is the hard part. Again, the costs and the infrastructure requirements of electric fleets and/or fuel cell or hydrogen fleets are significant, and so we believe working with OEMs that we'll be able to get those costs and those infrastructure in place, but we'll need infrastructure. We'll need other investments by governments and other things to get that done. In the meantime, these interim solutions are going to play a significant role, and how long interim is isn't clear, and it could be extended. Our view is that natural gas and hybrid and some of these other technologies that we have will really help our customers get through those periods, which again could be we could sell across our range a billion engines in those ranges before transition could be a billion engines. I mean, it's a lot of engines over the years, right, across the entire industry, across multi-years. It's important to be thoughtful about those transition technologies just like it is the final solutions. Makes sense. Thanks so much. Thank you. Our next question comes from Jamie Cook with Credit Suisse. Please proceed with your question. Hi. Good morning. This is Colton Zimmer for Jamie Cook. Our first question is on China. In your outlook, are you assuming that the downturn in this market isn't as bad as maybe you initially thought, or is it just pushed to the right and 2022 could be another down year? Our second question is just on the setup for incrementals next year. As these supply chain headwinds and costs go away, is there a chance to earn outsized incrementals in 2022, or did we miss it this cycle? Thank you. Thanks. I'll talk a little bit about China. The market for the year is a little bit higher than we had originally forecast, and we really think that is strong demand in the first half of the year. We're seeing growing demand for the NS V product ahead of the transition that happens in July, and that pre-buy as well as the challenges in the supply chain is driving our OEMs to build as much as possible at this point. One other dynamic that we think is going to impact going into the second half of the year is that some regions have extended the period with which NS V product can be registered. As we go into Q3, we're going to see an inventory of NS V product starting to reduce, and then we're really watching to see how quickly customers start to buy that NS VI product given it will come at a higher price with the added content. That is really the dynamic strength in the first half of the year, and then we're anticipating a drop in the second half of the year. 2020 was a record year. We've been saying we think it'll come back in line. Of course, it's continued to stay strong, so it's been a bit unpredictable, but we do think we'll see a falloff in the second half of the year. I mean, it's too early to say much about next year. As we've seen in the past couple of years, the government's been able to effectively set up some incentive programs that have really been taken up well by truck customers, it's just hard to say what the future plans are basically to take older emissions trucks out of circulation. It's too early to say. Certainly, second half of the year, we're expecting a big drop-off, wouldn't like a comment yet on 2022. As to your comment about the incremental margins, certainly, the longer these inefficiencies persist, eventually, that is clearly a headwind for this year. We've called it out. We expect they're going to improve in the second half of the year. We do expect that there's going to be improvement going into next year on that particular line item. There are a lot of moving parts and incremental margins, but yes, that line item alone sitting here today, we'd hope and expect to be better next year than it is this year. The rest will leave for a later day. Great. Thank you. Thank you. Our next question comes from Steve Volkmann with Jefferies. Please proceed with your question. Great. I wanted to go back to, Tom, your discussion around transition solutions because it seems like a lot of people are forecasting some pretty significant hybrid solutions over the next decade or so, but we never really seem to discuss those kind of projects. Are you working on those projects? Do you have customers? I'm wondering if that actually plays to your strength because hybrid would presumably have a little bit smaller engine, all things being considered. Just curious about your commentary there. Steve, the answer to the first question is yes. We are definitely working on projects now. They're very specific. They have launch dates, and they will be launched in these next several years. We will have hybrids on the road. We will be selling them through our key strategic OEMs. Hybrids are on the move, as you suggested, and again, their life mostly depends on how the zero-carbon solutions come down in cost and durability, reliability, and how the infrastructure gets built up, and we'll need both. I think that's why I said that these transition solutions that are going in place may be in there for a while, and they may be in there for a shorter period depending on which country, which application, which region you're in because those two things, both the infrastructure and the cost, depend on application and, of course, country and how much infrastructure is being built. The hybrid programs are real. They are getting launched. It's happening now. With regard to engine size, I think initially what we'll see with hybrids is they'll be relatively mild hybrid, the first step, and those won't make a big difference on engine. How big the engine is won't be impacted very much by the size of the battery, but you are right that as you add larger batteries, then you need less engine to carry the same load. I think those are probably Generation 2 solutions rather than Generation 1. Super. Just a quick follow-up maybe from Mark. You talked a lot about increases in cost, logistics, etc., but you didn't really mention price. Are you guys following this with increased pricing? I would assume this is a pretty good environment. Just any thoughts there? Thanks. Great question, Steve. Excluding the premium costs, we talked at the start of the year about positive 40 basis points from price and material cost, the combination of those. We're hanging onto those 40 basis points, I would say there are signs of a little bit of creeping inflation overall. Yep, we had pricing in place. We had assumptions about cost increase. Overall, we're just about hanging in there right now, that's it. Steve, can I just add one thing? Our costs, as you saw, were significantly higher than we anticipated even three months ago. Just to call it out directly, the big problem is semiconductors. There's a lot of supply chain challenges. There's everything, weather in Texas and now new challenges with India. You name it, and we have a shortage on it, but semiconductors is the biggie. That's the one that's really hard to deal with. In this quarter, we ended up buying chips on the market through the aftermarket and bringing them back into production. We rescheduled and rescheduled and rescheduled to meet our customers' demand. Our customers, after a pretty tough first half of last year, are finally seeing demand go up and really want to ship trucks to their customers, and we really want to help them do that. Frankly, we took it on the chin. We basically brought in everything we could as fast as we could and shipped it out to them and didn't raise prices or didn't do any of those things. We just shipped them, and we took it hard this quarter. That's just the honest truth. It's because we felt a commitment to those customers to get them the product best we could while the going was good. We're not really changing any of that other than, hopefully, as Jennifer said, we're going to get these costs better under control as we don't have to reschedule so much. Our chips still aren't enough, but we understand where they're coming from more now, and we understand how many we have really, and we'll be able to level some schedules some and reduce premium freight. It’s still awful, but it will be less awful in Q2 and less awful again in Q3 as we get more set up. It was a rough quarter, and I feel good about what we did for customers, and it was hard to get there. I appreciate it. Thanks. Thank you. Our next question is coming from the line of David Raso with Evercore. Please proceed with your question. Hi. Thank you. First, a clarification. The component growth, right, 43% the first quarter, slows to 28% the rest of the year, while engines, the opposite, 14% growth for the quarter, 29% for the rest of the year. That is simply all related to China, India, in the second half because, obviously, components is twice the exposure to China, India than the engine division, correct? It's nothing related to how maybe your customers are taking product at this point in the cycle. Is that correct? The main answer is no. It's a structure question. It's not that the components are just twice as much exposure. It's structured in a different way. The engine business is principally through joint ventures in China and India, and yes, you're right. Otherwise, that's the main factor. There can be some small timing differences, but that's not the point here, David. It's just the way our business is set up. My question, the supply chain tightness that we're seeing, maybe, Tom, how you usually think about year one of a recovery than year two. Given the supply chain issues, how are you perceiving the cycle differently? How are you perceiving inventories at the end of year one? I'm just trying to get in your head a little bit about how you're trying to digest this cycle given it looks like the inventory's going to be tight throughout the year, that also dovetails into a pricing question. Not trying to get 2022, 2023 guidance from you, just bigger picture. No, I get your point, David. I'll let Jen talk a little bit more about how she sees customers' orders. I would just say, broadly speaking, our view is that things that don't get shipped this year will be shipped next year because there is a supply constraint. There's strong demand out there, that if the cycle takes longer to recover or people can't get all the trucks they want, they'll get them next year. I mean, we've seen that in other regions where the capacity of the truck manufacturers doesn't ramp up as quickly. In Europe, for example, in the last upturn, we saw that. It just took them longer to finish the cycle. I think that's what'll happen here. It'll take longer to finish to the extent that the truck demand can't be fully supplied, which would not be a bad thing per se if it extended further. I think that's the way we're seeing it, is a longer extended cycle just because we're supply constrained. I'll let Jen talk about what she's seeing from customers in that respect. Yeah, for sure. As Tom said, customers are really trying to get everything they can because they see high demand. Inventories are low. Backorders are growing. I think the industry's going to stay largely supply constrained through the year, which is why we want to ship everything that we can to our customers to allow them to build and meet the demand. As I talk to customers, they think it's going to extend into next year because it's just not going to be able to build enough trucks to meet all of that demand that's out there. All right. Thank you. Thanks, David. Thank you. Our final question will come from the line of Chad Dillard with Bernstein. Please proceed with your question. Hi. Good morning, guys. Thanks for squeezing me in. Just following your Daimler announcement, can you talk about the cadence of the transition for medium duty? I know you mentioned that the 2024 CARB will be one catalyst, but is there an opportunity to gain some incremental share between, I guess, next year and then? Yeah. As we build up that partnership, primarily, the emissions regulation changeover is what's going to drive additional position with Daimler. That'll happen in the U.S. starting in the 2024 time period and then in other regions of the world as emissions change. That'll primarily drive the cadence of growth. Got it. I mean, can you talk about your components opportunity just beyond the China and India emissions transitions that we're seeing this year? Where do you see further opportunities to increase your content intensity? As you said, I mean, a big growth opportunity for us in the components business has been China and India with emissions growth and new customers. We're growing content with existing customers, we're also gaining new customers. Additional opportunity that I want to highlight also in China is we're launching the Endurant transmission as a part of our Eaton Cummins joint venture in China this year. The market in China for automated manual transmissions, we think, is growing from 8% to 22% this year. We have a low-volume line that we now have starting to produce products, we'll ramp that up this year. That's another growth opportunity in the components business. In China this year, we're also launching an 18 L version of that transmission later this year. As regulations continue to evolve and we expand some of these partnerships, that'll bring further growth opportunity for the components business. Jen mentioned earlier, Chad, that when we get stronger partnerships, we not only get more components because our engines go in, which have, of course, all of our components, but also we just introduce more of our components to their remaining engines because it just also reduces their technical investment to be able to use some of our components and our recipes on their engines. That'll just continue. That's been an ongoing trend, and that'll continue. Great. Thank you. Thank you. Thank you. We have reached the end of our question-and-answer session, so I'd like to turn the floor back over to management for any additional closing comments. Thank you very much. As always, thanks to everybody for your continued interest in Cummins. I'll be available for questions after the call. Yeah, I hope you all have a very good day. Ladies and gentlemen, this does conclude today's teleconference. We thank you for your participation, and you may disconnect your lines at this time.