Good morning, everyone. Welcome to the Core Molding Technologies Second Quarter Fiscal 2023 Financial Results Conference Call. All participants will be in listen-only mode. Should you need assistance, please signal a conference specialist by pressing star, then zero on your telephone keypad. After today's presentation, there will be an opportunity to ask questions. To ask a question, you may press star than one on your telephone keypad. To withdraw your question, please press Star, then two. Please note, this event is being recorded. Now, I will turn the call over to Sandy Martin, Three Part Advisors. Please go ahead. Thank you, good morning, everyone. We appreciate you joining us for the Core Molding Technologies conference call to review second quarter results for 2023. Joining me on the call today are Core Molding's President and CEO, Dave Duvall, and the company's EVP and CFO, John Zimmer. This call is also being webcast and can be accessed through the audio link on the Events and Presentations page of the Investor Relations section at coremt.com. Today's call, including the Q&A session, will be recorded. Please be advised that any time-sensitive information may no longer be accurate as of the date of any replay or transcript reading. I would also like to remind you that the statements made in today's discussion that are not historical fact, including statements or expectations or future events or future financial performance, are forward-looking statements and are made pursuant to the safe harbor provisions of the Private Securities Litigation Reform Act of 1995. Forward-looking statements, by their nature, are uncertain and outside of the company's control. Actual results may differ materially from those expressed or implied. Please refer to the earnings press release that was issued today for our disclosures on forward-looking statements. These factors and other risks and uncertainties are described in detail in the Company's filings with the Securities and Exchange Commission. Core Molding Technologies assumes no obligation to publicly update or revise any forward-looking statements. Management will refer to non-GAAP measures, including Adjusted EBITDA, free cash flow, and return on capital employed. Reconciliations to the nearest GAAP measures can be found at the end of our earnings release. Finally, the earnings press release we issued earlier today is posted on the Investor Relations section of our website at coremt.com. A copy of the release has also been included in an 8-K submitted to the SEC. Now I would like to turn the call over to Dave Duvall. Dave? Thank you, Sandy. Good morning, welcome to our second quarter earnings call. We're excited to share several important accomplishments this quarter. First, I want to share that at the end of June, Core joined the Russell 3,000 Index. This major milestone, as well as our record second quarter, are a direct result of our winning culture, driven by a dedicated team and their relentless focus on customer support and continuous improvements. I want to thank our hardworking team of talented people for executing Core's shared vision of growth and driving improvements in our business every day. Before we talk about our results, I want to briefly provide a few other comments. As we discussed last quarter, one of Core's four strategic growth initiatives for 2023 is our commitment to profitability improvement through our must-win battle of achieving higher operational performance across all Core locations. We are focused on operational excellence and continually improving production efficiencies. We understood that a disciplined execution of our operational excellence initiatives in 2023 would result in increased gross margins. This quarter, I'm excited to share that our gross margin for the quarter increased to 21%. This is the highest quarterly gross margin in over a decade. If you remember, during the last few quarters, quarterly calls, John Zimmer said he wanted to see it start with a two. Great forecasting, John. Sequentially, this is a 320 basis point improvement from the first quarter and an increase of 780 basis points from Q2 of last year. I believe these results are direct evidence that the business transformation is progressing well, and more importantly, gaining momentum by consolidating the improvements or compounding. We know that our successful gross margin expansion this year is a result of a relentless focus on our operational execution, material cost recoveries, and our technical solution sales, especially as we expand into new or adjacent markets. I'm excited to see that our must-win battle for 2023 is fully embedded in our operational excellence processes and supporting our continuous improvement culture. We will remain strategically focused on optimizing plant capacity through improvements in operational performance, and we are continually driving near-term opportunities within our sheet molding compound business. For the first half of the year, we increased our productivity by 15% in our focus plants. Recall that we reported an 8% productivity improvement in Q1. We are proud to report the continued improvements in our overall plant productivity, which reduces costs, increases our machine capacity, and reduces the demand on our technical resources, which is a significant opportunity cost as we look forward. I appreciate how focused our operational teams are in driving and supporting our 2023 must-win battle. The cross-functional teams are providing on-site support and facilitating system improvements, Kaizen events, and organizational development processes. A must-win battle means it's a priority for all of us. Turning more specifically to the quarter, second quarter product sales demonstrated the benefits of diversification, and we continued to see strength in our transportation and powersports industries, with Q2 softening mostly in building products. Compared to first quarter sales of medium and heavy-duty trucks shifted back below 50% of our mix, and powersports and industrial and utilities grew in the second quarter. As we mentioned last quarter, we continue to win programs in the industrial and utilities categories, specifically related to stormwater solutions, flush cover, and in-ground vault products. Our technical solutions team signed new contracts in the first half of the year that will contribute new and replacement annualized revenue of approximately $12 million that we are expecting to launch in 2023 and in early 2024. These programs relate primarily to new business in the industrial and powersports industries, and we are excited to launch these programs as they further differentiate our business into growing end markets where we provide high-value engineered solutions. We will continue to focus on margin enhancements by offering a differentiated solution with new and existing customers that seek improved product performance, lower cost of ownership, and reduced manufacturing complexities. Finally, regarding our sustainability efforts, we are currently in the certification process for Core's EcoVadis rating, and we expect this to be completed by mid-August. This certification further supports the value proposition of several industrial and utilities customers. We continue to work with customers to increase their usage of recycled material or developing a completely recycled solution by converting from traditional materials. All of these efforts closely align with our strategy of providing a technical and proprietary solution by utilizing our wide p ortfolio of processes and over 80 presses. This is especially important for our long-term relationships with blue-chip companies, where we provide single-source manufacturing arrangements. We firmly believe that driving sustainable solutions for our customers will create long-term value for our customers, shareholders, and, of course, Core Molding. With that, I'd like to now turn it over to John to cover the financials in more detail. Thank you, Dave. Good morning, everyone. We continued to drive our four strategic growth initiatives this year. Our financial results reflect this hard work. Record second quarter numbers were mostly the result of a combination of selling price improvements and operational efficiencies. As Dave mentioned, our team has stepped up to drive production improvements. We believe more improvements are attainable. A direct result of our focus to improve operation performance is the company's ability to generate free cash flow and improve return on capital employed, which we will discuss in a few moments. Our trailing 12-month Adjusted EBITDA through the second quarter totaled $40.5 million, our highest ever in the company's history. This gives us confidence that our strategic growth initiatives are progressing. I want to congratulate our team on their hard work. Turning to our financials. Second quarter 2023, net sales were $97.7 million, compared to $98.7 million a year ago. Product sales increased 2.6% versus the prior year period, which were largely driven by flat customer demand, coupled with increased customer pricing, pricing, primarily to recover changes in raw material cost. Gross profit for the second quarter rose to $20.6 million, or 21% of sales, compared to $13 million or 13.2% of sales in the prior year quarter. During the quarter, margin expansion was primarily due to production efficiencies as well as customer price improvements. We continued to see the US dollar weaken against the Canadian dollar and peso in the second quarter, which is a negative impact of about 100 basis points on gross, gross margin. We actively hedge a portion of our exposure to the Mexican peso and the Canadian dollar, still experience an overall negative impact to earnings by the change in the dollar. Selling, general, and administrative expenses for the quarter were $10.5 million, compared to $8.7 million in the prior year period. The increase was primarily due to year-over-year variable compensation-related costs relating to our improving performance this year. In the second quarter, the company reported operating income of $10.1 million, an increase of more than 2x the operating income of $4.4 million from the year ago quarter. Our operating income margins for the second quarter were 10.3%, up 590 basis points from the 2022 prior year quarter. Our effective tax rate for the second quarter was 19.3% and included $535,000 tax benefit related to stock compensation recorded in the period. Excluding the tax benefit, our effective rate would have been 24.7%, consistent with the first quarter. Net interest expense declined based on our debt refinancing last year and our investment income generated from excess cash balances in this period. Net income was $7.9 million, or $0.91 per diluted share, versus last year's diluted EPS of $0.26, an increase of over 250%. Adjusted EBITDA for the quarter was $13.7 million, or 14.1% of sales, compared to an Adjusted EBITDA margin of 8% in the prior year quarter. We are pleased with our progress on gross margin and EBITDA margin expansion reflected in our second quarter results, and we believe that more operational improvements are still attainable. Our GAAP to non-GAAP reconciliation tables are included at the end of our press release. Turning to the first half results. Net sales for the first six months totaled $197.2 million, up 4.2% versus a year ago, and product sales increased 5.9% versus the prior year period. Similar to the second quarter, first half sales increases were largely driven by momentum in transportation and power sports. First half gross margin was $38.3 million, or 19.4% of sales, compared to $27.6 million, or 14.6% of sales in the year ago period. Consistent with the second quarter, our first half margin percentage was primarily due to production, efficiencies, and favorable net customer pricing, and raw material costs. SG&A expenses for the first half were $20.2 million, compared to $17.2 million in the prior year period. Operating income for the first six months was $18.1 million, an increase of 75% from the 2022 first half. Year-to-date earnings were similarly impacted by foreign currency headwinds, lower net interest expense, and tax benefits discussed before. Net income aggregated $13.8 million or $1.59 per diluted share, compared to $6.1 million or $0.71 per diluted share in the comparable year period. First half Adjusted EBITDA was $25.9 million or 13.2% of sales, compared to $17.5 million in the prior year. In 2020-23, the company is beginning to see a return to normal seasonality after several years of unusual seasonality resulting from COVID and supply chain challenges. Based on normal seasonality, the company anticipates that the second half of 2023 sales and gross margin percent will be lower than the first half of 2023. The business seasonality has a direct impact on our product sales, volume, and mix. We anticipate that a combination of normal seasonality and the slowdown in some of our markets will result in a full year product sale for the 2023, that are flat to slightly lower than the full year product sales in 2022. We also anticipate the second half gross margins will be impacted by normal seasonality resulting in mix shifts, coupled with potentially lower fixed cost leverage, which we expect will produce a full-year gross margin in the range of 17%-19% compared to the full year 2022 gross margin of 13.9%. Turning now to the company's financial position. Starting with a discussion of cash flow. The company's cash provided by operating activities were $18.9 million for the six months ended June 30, 2023. Capital expenditures for the year were $4.5 million, resulting in a positive free cash flow of $14.4 million for the first half of the year. We expect to generate free cash flows for the remainder of the year, as operating cash flows are expected to outpace capital expenditures and working capital continues to be tightly managed. Our full year capital expenditures are estimated to be between $11 million and $13 million in 2023. By June 30th, the company had ample liquidity of $64.2 million to invest in and grow the business, which includes a combination of cash and cash equivalents and availabilities under the revolver and capital credit lines. The company also had term debt of $23.6 million at the end of June, and our debt to trailing 12 month EBITDA ratio remains less than 1x Adjusted EBITDA at the end of the second quarter. Our working capital continues to be well managed and netted to $45 million as of June, and we ended the quarter with accounts receivable of $50.4 million, with a DSO of 46 days, down from 48 days in Q1. Inventories were well controlled and remained less than 1x accounts payable at the end of June. Finally, our return on capital employed, a pre-tax return metric, improved to 23.6% on an annualized basis, driven by disciplined use of capital. We plan to continue to manage our capital deployments in a prudent and strategic manner, and believe that a combination of good liquidity and a strong balance sheet provides flexibility to focus on our strategic growth initiatives. As Dave discussed, we continue to work on operational efficiencies at all our plants and the higher margin technical solution sales to improve margins and reduce the impact of product mix shifts in our business. Our must-win battle for 2023 includes institutionalizing major productivity and quality improvements, as well as scrap reductions, labor productivity, and reduction of overhead spending. We're also focused on operational improvements with our new product launches, which usually take up to a year from launch to work out all the operational efficiencies. Our operational performance and efficiency goals are targeting further long-term gross margin enhancements, as well as increased capacity throughput and return on capital. Our full attention and focus as a company is on our four strategic growth initiatives that include revenue growth, technical solution sales, profitability improvements, and free cash flow generation. All of our goals, objectives, and targets flow down from these. We plan to stay on course with consistency and focus on maintaining our operational performance enhancements, as well as working on additional continuous improvement initiatives. The entire management team is dedicated to our strategic growth and profitability goals, with programs to derive long-term value creation. With that, I'd like to turn it back to Dave for some final comments. Thank you, John. ... Reaching and then working to maintain a 15% productivity improvement in the first six months of this year took, and will continue to take, daily operational discipline and continual improvement. We have upgraded our frontline leader onboarding and training in four locations, We'll continue to roll this out across the organization. As both John and I have explained, our must-win battle for 2023 is about fully embedding the continuous improvement systems into our more challenged operations, which benefits our sheet molding compound plants the most. With the systematic improvements in place and sustained, we can now focus on scaling the continuous improvement structure and company-wide cross-functional technical projects. We have also expanded our internship program and have incorporated an apprenticeship and educational co-op program in some locations. We are providing technical training by partnering with external agencies for funding and facilitated technical programs. All of this is to support and strengthen our team, and in turn, strengthen our organizational capabilities. We have communicated our goals throughout the organization, which places a high level of focus into driving speed and quality of event on our must-win battle initiative. We will continue to increase productivity, reduce costs, and expand our capacity by as much as 20% within the focus locations. This drives better return metrics on our investments and creates a stronger foundation for success as we plan for the next level of growth at Core Molding. We have communicated that we plan to add capacity, and we are currently evaluating the best approach, either by acquisition, facility expansion, or greenfield site. As I mentioned last quarter, we are also adding additional automation to support further production efficiencies, reduce costs, and increase capacity. Our 2023 must-win battle was a foundational step in maximizing current machine capacity and freeing up technical expertise before investing in step function growth, which will accelerate our long-term value creation and shareholder returns. Our 2023 outlook includes continuing to expand our revenue diversification by industry with high-value engineered solutions that enhance our margin profiles further. We are monitoring the demand environment and customer forecasts in the second half of 2023 and into 2024, are continuing to calibrate asset and labor utilizations. We are cautiously optimistic about the rest of 2023 and believe that the first half performance has set us up well for a strong full year 2023 performance compared to 2022. We're taking advantage of opportunities in various industries that require new solutions, including opportunities resulting from government-funded infrastructure and sustainability projects. Coming into 2023, we understood that we needed all locations operating at a high level, not just most of them. Making this happen was foundational to successfully executing the long-term growth of the company. We believe our progress in the first half of the year has set us up to turn more of our attention to growing the company, both organically and through acquisitions. Our team is ready to drive the company forward towards our long-term goals and to deliver long-term shareholder value. Finally, we will be at the Midwest IDEAS Conference in Chicago on August 24th, if you would like to meet with us in person. We welcome your questions on today's call or on a follow, follow-up call. With that, I would like to open up the line for questions. Operator? We will now begin the question-and-answer session. To ask a question, you may press star, then one on your telephone keypad. If you are using a speakerphone, please pick up your handset before pressing the keys. If at any time your question has been addressed and you would like to withdraw your question, please press star, then two. At this time, we will pause momentarily to assemble our roster. The first question comes from Chip Moore with EF Hutton. Please go ahead. Thanks, and congratulations on the very strong gross margin and operating margin expansion. I mean, like you said, it was the highest margin in over a decade. Maybe I just want to start out first with sales guidance. You, you kind of elaborated on that. Is my understanding correct, that a lot of it has to do with the seasonality? You know, last year might have been some tail end of pandemic demand catch up, steel production in full swing and, and abnormally high for power sports and even maybe some of the commercial trucks. You're expecting more normalized seasonality for this year, and that would explain the sales tough comparables from last year? Yeah, that's, that's a really good view on it, Chip. I think what we've seen in the past with COVID and the supply chain shortages, there were a lot of changes that customers made to either extend their product lines or fill the dealerships and fill the pipeline. I think we're seeing that coming back. With the supply chain shortages reduced, we're coming back to the normal seasonality, which we've always seen as far as Q1, Q2 being the highest, and then Q3 tailing off, and then Q4, when it's really into the holiday season. That's exactly what we're seeing this year. Great. That's, that's helpful color. My next question, you know, revolves around your production efficiencies and, you know, your 15% productivity improvement goal this year. This is a two-part question: Where do you think you are in that 15% improvement for productivity this year? It, you know, it's, it's fair for me to probably assume that for your gross margin guidance of 17%-19% for the year, that you might be at the lower end of the range despite doing, I think, 19.4% the first half of the year. Just given the way that that seasonality lines up for the second half of the year on the sales, do you think maybe you'd be at the lower end of the 17%-19% gross margin for the year? Yeah. I'll answer the first question and then leave it to John for the second question on the forecast. As far as the productivity, we're really looking at the overall productivity, the two plants in question, the SMC plants. You know, we're at 15%. We had said from the beginning that we would probably get about at least 20% overall throughput for those plants for the year. I think we're trending in that, in that direction. And what we're seeing right now is, you got to get to some level of sustainability before you start moving on to the next phase. We're seeing that sustainability take place, and those plants become integrated into the overall continuous improvement processes for the entire company. Yeah. Chip, on the 17-19, you know, I think right now we would say we're pretty comfortable that we're kind of in the middle of that. You know, what will happen is, is that... Well, you know, over the next six months, you know, volumes mean a lot. It will determine our fixed cost leverage. So we'll watch the volumes and, you know, from the seasonality and where we think revenue volumes come in. Then the other piece is a little bit of mix. You know, mix can change throughout the six months. We get forecasts from customers, but to tell you the truth, those forecasts are probably good for about one month, and they, they constantly change. So a little bit of mix comes into play also. We're probably, right now, thinking that we're right about in the middle of that, but we'll, we'll watch volumes and mix is what will really drive the difference between 17 and 19. That's very helpful color, Dave and John. My next question is around SG&A. You know, I noticed it ticked up a bit in the June quarter, and I'm guessing it's probably because of the way you do bonus accruals. Should we expect SG&A, as a percentage of sales, to be lower in the second half of the year than it was in the first half of the year? Maybe not as a percent of sales. You know, the way I look at it is, there's a fixed piece of our SG&A, and then there's a variable. Really, the variable piece of our SG&A is our, our bonus compensation. We do try to match our bonus expense with our earnings, you know, do a matching principle from accounting. So, you know, the first half of the year carries most of the bonus expense or a lot of the bonus expense, and then, pieces of it go away, or it's a lot less during the second half of the year. The way I kind of look at it is our, our fixed run rate of SG&A is around $8.5 million, is where it is. That's really just the, the people that come to work every day, the normal pay, and those types of things. Any difference between $8.5 million and what you see in the SG&A is usually a bonus accrual type thing. You can see for the first couple of months, first quarter, it was about $1.1 million. This quarter, it was $1.9 million. I would expect bonus expense accrual to go down in the third and fourth quarter just because, again, we try to match that with earnings, and we think earnings will be a little bit lower in the third and fourth quarter. That's helpful. My next question is more strategic. This is a great attribute of your capacity expansion goals. As Dave said before, it's a combination of organic and, you know, and just, you know, internal expansion brownfield. Can you give us maybe a sense, you know, if, if maybe your goal or near-term goal is 20% capacity expansion, you know, how long does something like the utility certification take, you know, month-wise, maybe? Then when do you... You know, how long is kind of lead time from when you get the automation machines in and certified to when you start seeing a ramp-up in sales for, you know, some of that maybe $12 million of new, new launches that you mentioned in your prepared remarks? Yeah, I mean, if I look at an, just a standard launch, it, it will vary, say, anywhere between, say, at the minimum, six months, if you're transferring a program, to, you know, about 18 months or so as far as the overall launch. I think the big thing for us, though, it's a continual process, so we haven't stopped, and there's still programs that are in our pipeline that we're working on now, looking at what we can do to capacitize that volume, whether that's acquisition or greenfield site or an expansion of our current facilities, which we have been doing, but, you know, we're at a point now where it's a, we're at a brick-and-mortar situation. Great. That's, that's very helpful, Dave. My last question is around free cash flow. You know, I feel like investors really haven't caught on to this. You've been doing a lot of growth CapEx, but, you know, it really you know, shown through in this quarter with, you know, $14 million of free cash flow in the first half of this year already, $12 million just in the June quarter. You know, as you think about the second half of the year, you know, with the natural sales cadence that you've talked about, and probably some working capital benefit, maybe as you collect ARs and receivables, would I be off thinking that, you know, maybe you could do $18 million free cash flow this year if you've already achieved $14 million? Yeah, Chip, I think you. No, I don't think you would be off. You know, again, we do believe we'll generate cash flows for the second half of the year also. I think, you know, where we are now with our operational improvements we've made, even with slower sales, you know, we believe we'll, we'll kick off operating cash flows, you know, pretty good operating cash flows. You know, and, and really probably from a free cash flow, it'll, it'll matter how much of that $11 million-$13 million of CapEx we can do. You know, it's not always about not wanting to spend it, it's about trying to get the projects done and, and, and find resources to do the projects, sometimes getting equipment in that you've ordered and stuff. I think, no, I, I don't think you would have a problem at the upper end of the teens there, that free cash flow for the year is, is an initial projection. Well, thanks, John and Dave. This is very helpful and insightful, and I look forward to the continued EBITDA and profitability enhancement over the next couple of years. That's it for my questions. Appreciate it. Thanks, Dave. The next question comes from JP Geygan with Global Value Investment Corporation. Please go ahead. Thanks, and good morning, gentlemen. My, my first question has been answered in parts in a number of different ways, but at the risk of asking you to repeat yourself, I'll, I'll ask it again. You've done a great job, really optimizing your asset base and improving productivity, and you've talked in a lot of ways about, kind of this must-win battle for 2023 and the productivity you still expect to gain. Looking forward beyond 2023, how should we expect you to grow organically, using your existing asset base, given, comments you've made about automation or other efficiency improvements? Or maybe said another way, how much can you really squeeze out of the existing business before you're forced to turn to something inorganic? Then maybe the second part of the question, which is, is connected to this: What form or how will you decide the form that inorganic growth will take in terms of acquisition versus greenfield, products, geography, that kind of decision tree? On the first question, JP, I think it's a good question. You know, for us, we've been evaluating, and a lot of it really has to do with how far we can get our current systems. We have currently filled all the, what I would say, the holes in our plants, where you have a, you can put a large asset into the pit and the facilities. We've really maxed out the facilities relative to being able to put large presses in place. That was the first step. Our step right now is really about maximizing the output of all the facilities with all the assets. That's really the must-win battle, and what that does is free up the resources and stabilize the operational system so that now we're ready to look at what acquisitions we can do and make those acq- ac- acquisitions quickly and successfully with the resources and being able to put in the core operational model. That, that's really kind of the, the overall plan that we had from the beginning. You know, what I would say that, you know, continual- continuous improvement as we continue to put in automation and improvements, you know, you're not going to see 20%-25% a year. Maybe it's, it's 4%-6% a year, somewhere below 10% a year on your existing assets. There is, is where we're really looking at, do we need to expand a facility, do a greenfield, or do an acquisition? I think that really depends on what the strategic benefit is of it. If we have, you know, four or five different areas that we want to get out of an acquisition, whether that's sales channels, capacity, a new technology, or a new material and process, it depends on how many of those it fits and where that fits within the. Does it make more sense to do the acquisition than do the expansion? All right. That's helpful. Maybe that's a long answer to your question. It's very comprehensive, though, and I appreciate the additional color. It's helpful to understand your thought process as you go through this. In terms of capital allocation, I think for investors who have been around for a while, the sting of the HPI acquisition, at least initially, which, and it turned out to be a good acquisition, it seems, but it, you might have bit off a little bit more than you could chew from a financial standpoint. How do you think about funding expansion after this? Then, how should we think about kind of your, your capital allocation priorities, given that you're really bumping up against capacity in your existing infrastructure? Yeah, I, I, I think, I mean, we will take the actually a little bit of the same process we took back in 2018 when we did Horizon. You know, we went into that deal and, and were less than 2 x EBITDA when we did all our models. Don't know that we really thought we were going to go into the turnaround in the traditional business that we did, which really caused us the issue. I, I, don't think we've mentally or, or, changed strategically on how we look at the capital. We, we are not an aggressive company, where we're going to go out 3x, 4x, or 5x our EBITDA and leverage up the balance sheet. We are going to be pretty responsible. We're probably going to be between 2x and 2.5 x. We'll make sure we model out, you know, even during downturns and everything else, that we can handle whatever leverage we bring on to the financial statement. I think we'll stay pretty conservative in that standpoint, not over-lever the balance sheet. You know, the benefit we have now is that our EBITDA is much higher even, and so it does allow us probably. We're a much more diversified company, so it reduces the risk of any certain industry, you know, the downturn in any certain industry hurting our financials. I think we're in a much better position now, but we're probably in the same thought process. It wouldn't be any more than 2x-2.5x. You know, as far as, you know, internal growth capital, the nice thing is, is that we set ourselves up about a year ago when we did the CapEx line. You know, we went into that, the, the debt structure that we have, that as a five-year debt structure, that allows us to, you know, if we, if we wanted to do expansion... ... you know, this CapEx. We, we have a, you know, our cash on hand, plus we have a CapEx line specifically, for that, that, has separate, you know, covenants and rules and, and payments and those types of things. I think that $25 million there, to really allow us to expand the business organically and grow organically if we wanted to. I think we're really set up with different ways to finance the business, but we're not gonna get overly aggressive. We'll, we'll stay EBITDA term or no more levered than probably 2x-2.5x on an acquisition, probably even less than that, just through organic growth. Okay. Finally, for me, could you talk a little bit about the labor situation that you're seeing today, as that's been the nexus of some cost pressures for a couple of years now? Yeah, I mean, what we were seeing a year ago, maybe a year and a half ago, is, is not nearly what we're seeing today. In most of our locations, we've had to adapt for sure, as far as our labor wage rates, as far as being competitive and constantly watching that relative to the areas and seeing if new businesses are moving in. We're constantly looking at that. We've done a lot with our onboarding and our training and our facilities to where it's a, trying to make it a better place when people come in and work so that they, they don't go somewhere else or, or have the, the want to go somewhere else. We've done a, a very holistic view of it on what we need to do. For sure, there's always more to do, and improve, and we continue to do that. But I, I would say that the area that, that still, I think everyone I talk to has challenges, is really more on the skilled trades or hands-on technical, like PLC programming and controls and things like that. Okay. Thanks for taking my questions today. Appreciate it. All right. Thanks, JP. Thanks, JP. Again, if you have a question, please press star, then one. This concludes our question and answer session. I would like to turn the conference back over to Dave Duvall for any closing remarks. Thank you for your continuing interest in our company. We look forward to providing an update of our progress when we report the third quarter results in a few months. Thank you. The conference has now concluded. Thank you for attending today's presentation. You may now disconnect.