Good day, welcome to Cepton's first quarter earnings call and business update. At this time, all lines are in a listen-only mode. Following the presentation, we will conduct the question and answer session. If at any time during this call you require immediate assistance, please press star 0 for the operator. This call is being recorded on Tuesday, May 9, 2023. I would now like to turn the conference over to Hull Xu, Chief Financial Officer. Hull, please go ahead. Thank you, welcome to Cepton's first quarter 2023 earnings call and business update. With me today are Jun Pei, Co-founder and Chief Executive Officer, and Mitch Hourtienne, Senior Vice President of Business Development. During the call, we may refer to our unaudited GAAP and non-GAAP measures in our earnings release. The non-GAAP financial measures should not be considered as a substitute for or superior to the measures of financial performance prepared in accordance with GAAP. Reconciliations for non-GAAP measures are included in our earnings release. I would like to remind everyone that comments made in this conference call may include forward-looking statements regarding the company's expected operational and financial performance for future periods. These statements are based on the company's current expectation and are subject to the safe harbor statements relating to forward-looking statements contained in our earnings release and the slides that accompany this call. Actual results for future periods may differ materially from those expressed or implied by these forward-looking statements due to a number of risks, uncertainties, or other factors, including those discussed in the earnings release or during today's call and those described in our filings with the US SEC. We are not undertaking any commitments to update these statements as a result of future events, except as required by law. As a quick reminder, this call is being recorded, and you can find the earnings release and slides that accompany this call as well as our webcast replay for this call at investors.cepton.com. Now I'd like to turn the call over to Jun. Thank you, Hull. Good afternoon, everyone. Thank you for joining Cepton's first quarter 2023 earnings call. We will provide a business update and review our first quarter financial results with you. I will start with an update on our series production execution. On the product side, we continue to ship pre-production units to Koito throughout the quarter. While the exact date of vehicle production launch is for the OEM to decide, our lidar remains on track to receive final validation from our OEM customer for production in saleable vehicles. Our products are being evaluated across multiple vehicle models under our existing production award. As a result of our continued performance with our OEM customer and the versatility of our flagship Vista-X90 lidar product for vehicle integration, we expect to receive additional vehicle models in the next couple of months to expand the coverage of our existing series production award. We're encouraged by the commitment to our technology from our OEM customer. This is reflective of our efforts and dedication to enabling lidars as a critical component of automotive safety. In addition to hardware, our embedded software allows us to meet the stringent automotive OEM requirement, such as cybersecurity, over-the-air update, and functional safety. It also allows us to deliver additional custom features we delivered for our OEM customers. These capabilities were developed by our in-house software teams and is a tremendous value add for our OEM customers. Software is subject to the same standard as hardware, and our OEM customer has some of the highest standards in the industry when it comes to the reliability and safe operation of their vehicles. We believe having the ability to deliver a combined hardware and software solution to our OEM customer under a series production environment positions us beyond a simple lidar hardware provider. It actually positions us as a total lidar solution provider and as a leader in driving market adoption to enable lidar for everyday vehicles. As our products near the final stages towards the production validation, we're also working on increasing production capacity at our contract manufacturers and Tier 1 partner facilities. We have mentioned in previous quarters that we work closely with our Tier 1 partner, Koito, to enable the future scalable production of our lidar products. Our continued efforts in scaling production include securing raw materials at scale and implementing production processes in both hardware and software to ensure we can deliver consistent quality at volume. For example, in this past quarter, we were able to increase the throughput by five times for one of the critical manufacturing steps, and we feel confident in meeting production milestones as we move towards SOP. Following the announcement of our Vista-X120 Plus product earlier this year at CES, we unveiled the Vista-X90 Plus this quarter. Vista-X90 Plus carries over the same slim form factor improvements to our current Vista-X90, the product that is launching with our lead OEM program. These improvements enhance our advantages in vehicle integration placed behind the windshield and unlocks the placement in other areas of the vehicle, such as the headlamp and fascia. Our Vista-X90 product is a direct result of working closely with our lead OEM customer to drive lidar adoption across the majority of the OEM customer's fleet. Cepton is the first and only known lidar company to launch a high-performance lidar in passenger vehicles behind the windshield. It is not a trivial task, and it creates a huge competitive moat for the distance future. Our new Vista-X90 Plus will also feature our recently announced point cloud processor ASIC, the Komodo. Developed in-house, this new ASIC is designed to improve our point cloud quality, reduce power consumption, and at the same time, replace FPGA and other merchant silicon devices to drive cost savings. In the years ahead, where production volume is high and on-time delivery is key, we are reducing reliance on the semiconductor supply chain with our own ASIC solutions. We expect to continue extending the technology leadership with our proprietary ASIC chipset. The accomplishments we have made to start out the year highlight our continued commitment and dedication to be a lidar market leader. As our products mature, we continue to make improvements in embedded software and innovate at the chip level to solidify our technology leadership. Transitioning from product development phase to the production phase stresses the importance of maintaining Cepton's standard quality at the volume demanded by our OEM customers. There are distinct challenges in maintaining the same level of precision and reliability in every lidar unit when the volume scales to tens and hundreds of thousands. Our investment towards production readiness will prove to be the key areas of differentiation in both lead time and cost. With that, I'll turn it over to Mitch for an update on our customer programs. Thank you, Jun. I'm happy to announce we recently hired a new director of customer programs, Luis Gonçalves, who joined us from General Motors. He brings over a decade of automotive experience from global OEMs such as GM and Honda. Luis will support our Detroit OEM programs. As Jun indicated, our existing lead OEM series production program is expected to expand in the coming quarter by at least 3 additional vehicle models. This is the result of joint collaboration efforts between Cepton, Koito, and General Motors in product maturity, customized software development, and vehicle integration. Beyond our current OEM business, we received an RFQ in the past quarter that we believe to be the top automotive OEM opportunity in terms of program volume this year. Cepton already has a rich history with this automotive OEM, and as such, was selected to respond to this RFQ directly as a tier one technology supplier. This is a recognition of our maturity as a lidar company and leverages all of the collaboration history with Koito Manufacturing. More importantly, the decision to have Cepton respond directly as a tier one technology supplier is made by the OEM in this case and is not a self-proclaimed aspiration to become a tier one. We believe this is how the lidar industry will continue to evolve, building trust, winning series production programs, executing and launching, and allowing the OEM to help guide final supply chains for the future. In addition to this opportunity, as a result of General Motors' recent sensor suite announcement for their Ultra Cruise program, where Cepton lidar is placed behind the windshield, executives from a global top 3 European OEM visited our headquarters last month. We are now in an advanced RFI phase for their future passenger vehicles. We look forward to sharing more information with you in the coming calls. On to near-range lidar products. Cepton is one of very few lidar companies with an automotive-grade near-range lidar product that has a very large vertical field of view suitable for trucking applications. Over the past quarter, we have made strong progress with multiple top trucking OEM customers. We have progressed to the RFQ phase with a global top 3 trucking OEM for our near-range lidar product called Nova. Lastly, a word on the smart infrastructure segment. We started shipping units to our tolling customer, fulfilling the multimillion-dollar contract announced at the end of last year. While our Nova product is suitable for trucking applications, it's also an ideal product for smart industrial applications, and we continue to ship our Nova sensors to support autonomous ground vehicle use cases. Now, I'll turn the call back over to Hull. Thank you, Mitch. Starting with our first quarter results. Total revenue for the quarter was $1.5 million, same as the prior year period and a slight decrease compared to our previous quarter. Product revenue was $1.2 million, a slight decrease compared to the prior year period, but a 27% increase compared to our previous quarter. We also have development revenue of $0.2 million based on the timing of completion of our segment projects. While we are still early in achieving volume production for automotive programs, we have shipped a record number of lidar units per quarter and a record number of lidar units for automotive customers. We expect this trend to continue as we ramp production to fulfill purchase orders for our lead series production program. Gross margin was negative 5% for the quarter, primarily driven by revenue mix shift between automotive and smart infrastructure. As our sales volume shifts towards pre-production units and later production units for automotive, where ASP is slightly lower than that of smart infrastructure, we expect our gross margin to experience some pressure in the short term until component volume pricing kicks in and fixed cost leverage can be realized as a result of increased volume. ASP on the smart infrastructure side is expected to remain at similar levels as that of last year, and development projects typically have higher margins, which should help with overall gross margin for the year. First quarter GAAP net loss was $14.7 million or $0.09 per share, basic and diluted. Non-GAAP net loss was $11.4 million or $0.07 per share, basic and diluted. First quarter non-GAAP adjusted EBITDA was negative $11.6 million. As of March 31st, 2023, we had approximately $80 million in cash and short-term investments, and none of that is held at regional banks. As a reminder, our cash position increased from the closing of the $100 million preferred stock investment from Koito that closed in January this year. We look forward to seeing everyone at our annual meeting scheduled on May 18th at 9:00 A.M. Pacific Time. With that, I'd like to turn the call over for questions. Thank you. Ladies and gentlemen, we will now conduct the question and answer session. If you have a question, please press star followed by the number one on your telephone keypad. You will hear a one-tone prompt acknowledging your request. If you would like to cancel your request, please press star two. One moment please for your first question. As a reminder, if you have a question, please press star one on your telephone keypad. Your first question comes from the line of Richard Shannon from Craig-Hallum. Your line is now open. Well, hi, guys. Thanks for taking my question. I'll have to apologize for getting on late here. I had a number of calls after market today. I got on late, and I didn't hear anything about a change or any discussion on the guidance that you gave last quarter about revenues and OpEx. Did that change, Hull? No. No change for the year. Okay, perfect. That's what I thought. Just want to make sure here. I came in during, I think it was Mitch's commentary on some of these bullet points in the press release here that I probably missed some key detail here. I guess the first bullet here about executing an RFQ response. I think I understand that this is unusual for a component supplier. It's really more for Tier 1s here. I just want to make sure that I'm gathering all the importance of this. Maybe if you can talk about how long you've been engaged with this customer. Is this something rather new or been working on for a while? Yeah. Thanks, Richard. This is Mitch. In case you missed my section, this is an RFQ that we've been prepping for for a long time. You know, I stated this, Cepton already has a rich history with this automotive OEM. We were selected to respond directly as a tier one technology supplier, kind of validating our maturity as a lidar company. We believe this to be the biggest open automotive opportunity this year to bid on. Okay. Assuming, I think, and it said in the last call you expected, 1 or more awards to be given this year or I think within 6 months. I assume that this is 1 of those then. Is that right, Mitch? That's correct. Yep. Okay. Okay. Maybe just stepping back a bit here on the automotive side, can you tell us where you sit in terms of how many RFIs and RFQs you're currently in process with? Yeah. We're always in various stages of the RFI phase with most of the top 10 automotive OEMs. RFQs, we really only talk about or give dedicated airtime to them once they get to a critical milestone like we are today with this top 10 OEM. I would say, you know, within the top 10 there's probably two or three RFQs open and always, you know, five to seven RFIs open. Okay. That is fair enough then. Maybe let's ask about kind of the visibility with your primary, your first big automotive customer. I think you mentioned in the last call you have 6 months of rolling visibility here. Wondering, Hull, if you can kind of update us on what that looks like today. Have you seen increases to that, or just kind of characterize what the change has been since the last call? Yeah. Thanks, Richard. We do have over 10,000 units, of, purchase orders. That's plenty of visibility for us to execute on, which we are very focused on, is executing on fulfilling those units. You'll see higher volume ramp towards the second half of this year as we work out, you know, the logistics with the suppliers and contract manufacturers as well as with Koito. Okay. With this visibility here, you said over 10,000 units, I think that's a number you may have used on the last call. Does this assume the same number of vehicles you're shipping into, or has there been an increase in that as well? This assumes the same number of vehicles we're shipping into. The vehicles that are already planned to have started production in 2024 hasn't changed from our OEM customer. Mitch did mention that we have commitment from the OEMs to add additional vehicles, right now at least 3, into the overall program. Those vehicles are not expected to have SOP in 2024. Okay. fair enough, and that's good perspective. maybe last question, I'll jump out of line here. on the last call, you talked about having a win with the top 10 global OEM for an autonomous ground vehicle. I haven't seen any news out there that suggests who that might be. Maybe I haven't searched hard enough here. In the near press release, you talked about shipping these samples, to autonomous ground vehicle customer. Is that, Is one of those customers the one you referred to in the last earnings call? Is there any way you can help us think about who that might be? Yeah, that's right. I mean, we can't disclose the name yet, but I think in Q4 of this year, there'll be some more public disclosures about the project and how Cepton supporting this OEM customer. It is a level four autonomous ground vehicle use case. It's been exhibited at a couple industry shows, or it's starting to be exhibited at a couple industry shows, but exact details are looking like Q4 this year. Yeah. I'll add that, I mean, it is a top, global top 10, automotive OEM that has a significant play in power products. Okay. Is this customer, is Koito involved with this customer with both this level 4 autonomous ground vehicle and their higher volume passenger vehicles as well? Yes, they are. Okay. Okay, good to know. I will jump out of line here, guys. Thank you. Thanks, Richard. Your next question comes from the line of Gus Richard from Northland. Your line is now open. Yes. Thanks for taking my questions. Just in terms of GM and start a production, you know, when do you anticipate that to occur? Yeah. I think GM publicly stated in their March press release around the Ultra Cruise sensor suite that they're aiming to actually have this salable vehicles to the consumers in December of this year. That's for the lead CELESTIQ vehicle. Beyond that, the additional vehicle models will continue to launch in first half of 2024, and then, the remaining in second half of 2024, first half of 2025. Okay. At the end of 2024, you should be in four vehicles. Am I doing the math right there? At least four, yes. Got it. Just turning to the infrastructure business, you know, you announced the win this quarter, and I'm just wondering, you know, how many states, you know, how much of that order have you shipped and, you know, do you expect any follow-ons? Yeah, definitely. We started shipping against that order in April. There's a regular shipment every month for this tolling operator. It's going across three states initially, but there are many more that they're bidding on, and we expect to expand through early next year to additional states. Okay. just rough numbers, what% of the US population does that cover, roughly? Oh, wow. I think I'd say 10% is what we had. Yeah. I mean, there's a populous East Coast state there. I think we listed the states. Yeah. The 10% is probably the coverage of what we have with that operator in terms of equipping the toll roads with lidar, right? There is still a vast majority of toll roads that's not equipped with lidar in this, in this first phase. Right. Got it. All right. Super helpful. That's it for me. Thank you. Thanks, Richard. Bye, Gus. Your next question comes from the line of Matthew Galinko from Maxim Group. Your line is now open. Hey, guys. thanks for taking my question. Just was curious about what the pipeline looks like for the smart infrastructure business, as of, you know, this point, beyond the highway win you discussed previously. Definitely. We're still supporting, you know, dozens of different applications. I would say there's increasingly more applications that are starting to ramp now beyond just proof of concept. Previously, we've talked about airports. We expect those to be officially announced and ramp later this year. The autonomous ground vehicle use case is a result of our Nova near-range lidar product. We've, you know, we've begun collaborating with Koito on that, because there's a lot of interest in the short-range lidar for various applications. To just put a little bit more finer details on that. For this year, we expect smart infrastructure in terms of revenue will be in the single-digit $ millions area, towards mid-single digits. We do expect next year to be in the double-digits area, $ millions. Got it. Thanks. Maybe just, if you could touch on what you're seeing in the competitive environment, you know, in the RFPs you're responding to on the automotive side and, on the smart infrastructure side as well. Yeah. On the automotive side, it's really Cepton and one competitor at most accounts. I would say there's never more than one or two serious competitors in automotive because they have a pretty lengthy vetting process with their RFIs. Once they get to RFQ, they have it narrowed down to one or two companies. On the smart infrastructure side, we're still seeing where directional lidars are replacing spinning lidars in applications. You know, in that case, some of the spinning lidar companies are being conquested with directional lidars. I think there's a few more competitors within smart infrastructure as lidar companies try to pivot to that space if they didn't get an automotive program. Got it. Thank you. Thanks, Matt. Once again, it is star one if you want to ask a question. There are no further questions at this time. Please continue. Okay. Thank you for joining us today. We're really looking forward to this new year and a lot of excitement in the automotive business. We'll report to you next quarter, hopefully with a lot more exciting news. Thank you. Ladies and gentlemen, this concludes today's conference call. Thank you for your participation. You may now disconnect.