Good day, everyone, and welcome to the fourth quarter full year 2021 Eastman Chemical Conference Call. Today's conference is being recorded. This call is being broadcast live on the Eastman website, www.eastman.com. We will now turn the call over to Mr. Greg Riddle of Eastman Chemical Company, Investor Relations. Please go ahead, sir. Thank you, Tracy, and hello, everybody, and thank you for joining us. On the call with me today are Mark Costa, Board Chair and CEO, Willie McLain, Senior Vice President and CFO, and Jake LaRoe, Manager, Investor Relations. Yesterday, after market close, we posted our fourth quarter and full year 2021 financial results news release, an SEC 8-K filing, our slides, and the related prepared remarks in the investor section of our website, www.eastman.com. Before we begin, I'll cover two items. First, during this presentation, you will hear certain forward-looking statements concerning our plans and expectations. Actual events or results could differ materially. Certain factors related to future expectations are or will be detailed in our fourth quarter and full year 2021 financial results news release during this call in the preceding slides and prepared remarks and in our filings with the Securities and Exchange Commission, including the Form 10-Q filed for third quarter 2021 and the Form 10-K to be filed for full year 2021. Second, earnings referenced in this presentation excludes certain non-core and unusual items. Reconciliations to the most directly comparable GAAP financial measures and other associated disclosures, including a description of the excluded and adjusted items, are available in the fourth quarter and full year 2021 financial results news release. As we posted the slides and the accompanying prepared remarks on our website last night, we will now go straight into Q&A. Tracy, please, let's start with our first question. Thank you, sir. If you would like to ask a question, please signal by pressing star one on your telephone keypad. If you're using a speakerphone, please make sure your mute function is turned off to allow your signal to reach our equipment. We will now take our first question from David Begleiter from Deutsche Bank. Please go ahead. Thank you. Good morning. Mark, just on Advanced Materials, very nice guidance for 2022. Can you talk to how much line of sight you have to that $700 million EBIT being performed this year, between price increases and innovation? Sure, David, it's good to hear from you. We are really excited about Advanced Materials and its ability to deliver, you know, pretty substantial earnings growth, as you just mentioned. I think to talk about it's best to start with the context of last year, because it really feeds into why we're so confident about this year. Last year, both at the company level as well, in particular at the Advanced Materials level, you know, primary demand was incredibly strong at the consumer level, strong in transportation, B&C, durables, you know, a variety of markets, textiles, et cetera. The constraint in serving it, especially in Advanced Materials, wasn't a demand situation. It was a outbound logistics and operational concern, because the demand had come back in such a strong way. We across the world, of course, ran into supply chain outbound logistics constraints in the industry. We at Eastman had operational constraints. You've got all this primary demand. Then you've got the innovation driving the growth to be well above in markets, especially in durables and transportation and textiles. Textiles is fibers. You've got these operational constraints, right, that were in three buckets. There were planned shutdowns, and in particular in Advanced Materials. We had to pull forward the line conversion of Tritan because that demand was so strong, we weren't able to serve it with the existing capacity. We had that line conversion that took a bunch of capacity offline during the second quarter of last year. Then we had a long shutdown in the fourth quarter to expand capacity and improve reliability. Bringing that set of facilities back up online in December took a lot longer than we expected. Operationally constrained demand through last year. When you look at this year from a volume mix point of view, we expect to have a lot more capacity, and we're in a better logistics position to serve all that demand. Innovation will continue to deliver a lot of strong growth on top of that allows us to have a very large driver on that front. In addition to that, of course, with the market being so constrained and tight last year, we had extraordinary inflation across the company and in AM, and it really accelerated through the back half of last year in Advanced Materials in particular. There was a period of time, as always, that takes prices to catch up to raws. Now on that front, we did a great job of getting all of our prices back up, in especially plastics as well as new contracts and interlayers to recover the distribution, energy and raw material headwind that we had incurred. As we look forward, you know, those prices are sufficient to cover, you know, raw material and energy costs being similar to fourth quarter and an increasing logistics headwind this year. You've got at least $100 million of spread tailwind that is fairly well defined by the prices we have in place now. You put those two together, that's very strong growth. Then there's still a cost tailwind as well for this segment. When you have all those operational shutdowns like we did last year, it's not just higher maintenance costs, the lost volume opportunities, it also led to a very high air freight expense. At the company level, you know, air freight was probably $65 million last year relative to a normal $10 million, and a lot of that was in Advanced Materials. Our supply chains are in much better shape where we're not going to incur that air freight this year, already have good plans to, you know, materially reduce it back to that more normal level. Not all the way there, but, you know, good progress. You've got cost tailwinds to some degree offset by growth spend. When you put it all together, it adds up to a very impressive earnings outlook for Advanced Materials. You'll see that immediately in the first quarter with strong sequential improvement as that volume and mix improves without the operational constraints of that, you know, fourth quarter, which was over $25 million there. Spread expansions, you know, going to occur by those prices that are already in place, as we talked about, and costs will be a bit better. We feel great about the segment, and it's really a testament to the innovation, right? It's not just about markets. You know, we're growing well above our markets, even in automotive being above, the automotive challenges by a significant amount. Oh, very good. And just one thing, last thing on fibers, Mark, you referenced strong growth in textile products. Talk about the growth of that, of those products in 2021, as well as the earnings profitability and, what you foresee for 2022 in textile products. Yeah. Textiles is a great story. As you know, we've been investing in building out a new set of markets with an improved Naia textile fiber. We've been able to add sustainability, you know, to this value proposition with not just the biopolymer content that we've had forever, but now the acetyl component, the other 40% being derived from waste plastic. You've got a product that is, you know, sustainable and sustainably grown forest wood pulp made from waste plastic and certified biodegradable as microfibers if they get into the ocean, you know, through the washing machine, et cetera. That value proposition, especially for luxury brands and the women's wear market, where sustainability is a very important factor, is driving just tremendous growth from that market, combined with market recovery from 2020. You saw very good revenue in the fiber segment that was driven by this. You know, revenue volume mix was relatively stable in tow, and the revenue growth is really being driven, you know, by the great success we're having in this space. It's exciting because we see that continuing, right? The growth we're seeing in women's wear also starting to get in athleisure is creating a lot of opportunities to grow. In fact, this is like Tritan, where we're moving quickly now to convert more tow lines to making Naia textile fibers to keep up with the growth that we see this year and the years to come. It's an exciting story. You know, though obviously, and this business, by the way, on the textile side, did a nice job of keeping prices to keep up with raws. The spread compression that happened in this segment was really on the tow side. Thank you very much. We will now take our next question from Vincent Andrews from Morgan Stanley. Please go ahead. Thank you and good morning, everyone. Mark, maybe you could just talk to us a bit more about the recycling plant announcement in France. Two particular areas I'm interested in is, one, just on the milestones that, you know, the boxes you need to check, and your comfort that you're gonna check those boxes and maybe over what period of time you think you'll be able to do it. Then following up on the textiles line of discussion, I did notice, you know, in that you did include textile applications, as an outlet for the France project. I'm just curious, in that overall project, how big of the mix textiles might be, and if the, you know, versus maybe a year ago is if the incoming on textiles for that type of a facility is really increasing and maybe that's gonna be another vector for these applications. Thanks, Vince. We're really excited to get this second project announced. Obviously, we're incredibly excited about the first project we're building that will be online at the end of this year, proving out this technology at much larger commercial scale and enabling very attractive specialty growth here in the short term. As we look at the French project and getting a position in Europe to serve and enable the circular economy is just an exciting opportunity. You know, we looked all over Europe and France was a very unique opportunity that we're very excited about. The French government was very committed to be a leader on plastic waste and climate as you might imagine, and really trying to develop the circular economy. They were willing to, you know, be aggressive on how they're gonna improve their recycling infrastructure to support this plant. They, you know, were helpful in making sure we found the right set of incentives, you know, right understanding and very available green feedstock for the recycling feedstock as well as green energy and steam. A lot of factors came together to make France a very attractive location. Europe as a market, very attractive because, you know, the, especially in France, those brand leaders, especially in the cosmetic luxury space, are, you know, very forward-leaning on sustainability, on plastic waste and dealing with climate. Strong engagement. They wanted to have a plant in their backyard. Once again, good choice in France. You know, that allows us to have a very strong competitive position in being a solution provider on this space. Market demand, very strong. As you saw, a number of LOIs in place. One of the milestones that has to be completed, Vincent, is just completing those agreements to, you know, lock in both the specialty offtake of this plant as well as the PET offtake. I'll come to textiles in a moment. It is, this plant's gonna be a mix. The first plant's gonna be primarily specialties. This plant will be a mix of, you know, continuing to have our specialty capability there around our copolyesters, as well as making PET for packaging. We got to complete those agreements, engagement's very strong and make sure that's done. The second thing, of course, is sourcing feedstock. We're making great progress with a number of suppliers on the feedstock. One of the attractive aspects of France is there's over 600,000 tons of polyester waste a year. You know, tapping into that as well as other countries across Europe, you know, we're confident we're gonna get the feedstock, but you got to make sure, you know, you've completed that sourcing. The site selection is the last part, which is we have three very attractive sites identified. They all have very attractive green energy supply that we're working through. You know, what is the best one with the right logistics for both inbound and outbound, as you're moving a lot of material here, as well as, you know, that green energy, which is key to our carbon footprint and our cost structure. We're working through all of that. I'm very confident, you know, all three sites are attractive. We just need to decide which one. We feel good about the track we're on. It's just completing, you know, the work that we have going. Then on textiles, it will be. Okay. Yeah. Yeah. On the textiles part, Vincent, textiles will be part of it. It's not our primary focus at the moment because we've had so much engagement, you know, in the packaging and the specialty side. We've been primarily working with customers on that front. We're starting engagement on the textile side right after, you know, packaging and plastic waste. You know, the biggest second contributor to incineration landfill is textile waste. There is gonna be a significant and meaningful circular economy. That's why we're having so much success in our Naia cellulosic fibers is for the same reason. We expect textiles to be a part of this project, but I'm not yet sure what percent, so I don't wanna get into that at this point. No doubt, it's a source of feedstock, and it's a source of offtake. Okay, sounds exciting. Thanks very much, guys. Yep. We will now take our next question from Jeff Zekauskas from JPMorgan. Please go ahead. Thanks very much. In your script, you talked about elevated spreads in your chemical intermediates business that you thought in the second half might be more narrow. Which are the spreads that are elevated now that might narrow later in the year? Sure. Good morning, Jeff. So obviously, spreads on the olefin side are the area where we've had the most expansion through last year. There was a belief at some point markets will sort of normalize as supply and demand come into more balance. We thought that would happen in the fourth quarter, and it's held up better than expected, as you can see in our results. We expect, frankly, those spreads to continue to hold up as we go into the first quarter. Then, you know, our forecast is based on moderation starting in the second quarter and becoming you know, more towards normal in the back half of the year, which is just a forecast. As we all know right now, Jeff, no one really knows exactly how that spread normalization is gonna occur. Just to be clear, that's what's, you know, in our assumptions. It's important to remember that there's other things that go on in this segment that create a lot of value, right? We've got, you know, very good volume mix upgrade, especially mix upgrade, and the growth we have in ag functional amines and, especially plasticizers. Acetyls will actually be, you know, up in earnings in a meaningful way this year versus last year. 'Cause last year we had a very large shutdown in our acetyl complex. We're gonna have a lot more volume to sell this year. Acetic anhydride, because of contractual reasons, didn't improve that much last year, and it's catching up, you know, to the better market conditions this year. We're gonna have, you know, better sort of margins in acetic anhydride, which really is the larger part of our business. You know, you have to remember acetic acid is a small co-product for us, and we're not that levered to what's going on in that market. You've got a lot of positives going on, not to mention substantial cost tailwind for the segment when you think about the you know high shutdown schedule I mentioned in Advanced Materials and how that's a tailwind. That applies across the company as and you know a good portion of that high shutdown unusually high shutdown schedule last year was in CI, right? We delayed a bunch of maintenance turnarounds from 2020 into 2021 for safety reasons in keeping people from getting COVID. We had a high schedule there. We also had some unplanned outages like Uri and a few other outages in CI in the fourth quarter that you know were a headwind that will all become a tailwind. You got cost tailwinds, operational, you know, cost savings improvements, and then you've got these other businesses growing that net against whatever the normalization of CI is on the olefin spreads. Thank you. In your proposed French plant, can you give us some insight into what you expect your customer agreements to look like? You know, do you wanna carve up the plant into, you know, certain segments and have, you know, some, I guess, more defined rate of return that's less volatile based on various changes in costs? Or do you wish to go about it in a, you know, in a different way? No, we definitely are focusing and designing these plants, with an absolute focus on maintaining steady spreads as much as possible, to provide a very reliable source of EBITDA for the company and margin stability in how it shows up every year. That's our focus. Now, there are two models in how you do that. The first model is a certain percentage of this plant will continue to be specialties like what we're doing in Kingsport. There's a tremendous amount of demand in cosmetics and electronics, and some very, you know, sort of unique high-value packaging items, that, you know, are specialty products that we sell every day now. We base those prices on value, and we have good, you know, differentiated positions in the marketplace to maintain prices relative to raw material costs. Our pricing strategy for the specialty part of the plant would be what we do every day at Advanced Materials. In addition, a good portion of the volume will be, you know, making PET for packaging. That will be the circular contracting model we talked about at Innovation Day. Brad covered it pretty thoroughly. Those will be take or pay, you know, long-term contracts that, you know, the prices are based on the value that we have in providing mechanical recycling content to the marketplace. Remember that current food grade rPET is trading at a 40%-50% premium to sort of virgin PET today and for the last couple of years in the European market. These will be cost pass-through contracts. We're not gonna be taking risk on what the feedstock costs are. Which makes a lot of sense for the customers because, you know, if the feedstock costs for us go up, you know, the food grade mechanical recycling costs are gonna go up even more. This is a hedge for them about the risk of buying mechanical recycle content relative to what the cost pass-through contract would provide, which will be relatively more stable. Those are the kind of contracts we have. Stable margins derived from both parts of the plant. The exact mix of what is gonna be specialty versus PET and textiles is still being determined by us, because we're seeing a lot more specialty demand than we originally expected. That's good. Those are higher margins, and we're working on how to balance all of that out. Whatever we build is gonna be flexible. The lines that make PET will have the ability to flex and make our specialty copolyesters in the future, so we can always mix upgrade these facilities over time, if that opportunity presents itself. Okay, great. Thank you so much. We will now take our next question from P.J. Juvekar from Citi. Please go ahead. Yeah. Hi, good morning. Mark, you know, you were in the PET business before, then you got out. What is your confidence level to get this 12% ROC that you're talking about in this French plant? You know, when you talked about recycled PET, rPET, you know, we know it swings wildly. I mean, is that the spread kinda locked in your mind to get that 12% ROC? Can you just talk about that a little bit? Sure. Our absolute focus has been on this question because I have no intention of getting back into the merchant PET business that had wide swings in profitability. I ran that business for quite some time and a number of years ago and not going back there. We've been very clear with investors as well as customers that, you know, the approach we're taking here is different, and it goes back to what I just said to Jeff's question, right? The PET part of this business is gonna be in long-term offtake contracts with cost pass-through structures where we're not taking spread risk on what the price versus feedstock cost is. That's the only way we're gonna build this plant, right? You know, those contracts have to get in place. Customers are engaged, understand that. That's what's in these LOIs that we're getting. You know, of course, we got to still work through all the details to get to complete agreements, which is, you know, part one of those milestones that Vince asked for a moment ago. To be clear, we're not gonna build a plant unless we get it that way, right? We're not gonna get, you know, slide back into sort of that volatile business, that is the normal PET business. The specialties, you know, we have a very long demonstrated track record for a few decades now, especially the last decade, of delivering very strong volume growth, but also very, you know, steady spreads over time. Obviously, there's, like all specialties, sort of expansion, contraction with, you know, movements and deflation or inflation, of your raw materials. We have very differentiated positions. Frankly, this plant's gonna give us even more differentiated position relative to competitors 'cause we're gonna have recycled content in our products, you know, in a plant based in Europe that gives a much better circular economy benefit for anyone who wants to buy from this plant. You know, and the circular economy is a very regional concept. When we build plants in Europe or in the U.S., it's a significant advantage relative to Asian competitors, you know, in how we can sort of provide sort of, you know, within region solutions. Great. Thank you, and congrats on that plant. My next question is quickly on Thank you. We're really excited. Thank you. Yeah. My next question is quickly on inventory levels, and looks like inventories must be low given that you are air freighting raw materials here. What's the inventory levels at your customers when you look down the chain or look across your portfolio? Is it quite low? You know, are some companies expecting some pullback in business activity because of low inventories. What's your take on that? Thank you. Yeah. Inventories are at historic lows for us, and as far as we can tell with our customers, historic lows for them too. I should have put that in my string in David's question around Advanced Materials. That's another driver of volume growth on top of good market pent-up demand and the logistics constraints being freed up and our innovation driving growth. There is this need to rebuild inventories all the way down the chain pretty much across every market. I would say the only exception I can think of across all of our markets is tow, where the cigarette customers are about normal inventories. Automotive obviously has a huge amount of pent-up demand and need to build re-inventory. Building construction, same thing. Durables, you know, where we've seen a lot of growth, you know, there's still a lot of inventory rebuild in that stream, and the list goes on. That's in AFP as well, you know, with coatings and care chemicals and animal nutrition. You know, another upside, you know, that creates a lot of demand that, you know, this year will still be pegged against, you know, what we can make and ship. You know, as we continue to expand capacity to enable more growth next year. Thank you. We will now take our next question from Kevin McCarthy from Vertical Research Partners. Please go ahead. Yes, good morning. You signaled plans to deploy $1.4 billion of capital in 2022. I was wondering if you could help us understand what the mix of repurchases versus M&A might be, also the timing of that deployment, you know, recognizing that you're set to close the adhesives deal, I would think, relatively soon. As a matter of clarification, is that deployment included in your EPS range? Yeah. Thanks, Kevin. This is Willie for the question. Yes, we actually put a lot of the proceeds and the free cash flow to work at the end of 2021. I'd highlight that we repurchased roughly $1 billion, of which $700 million was during Q4, mostly in November and December. As we think about having $1.4 billion next year, it's a combination of the proceeds from our adhesives divestiture, and we anticipate that'll be at the end of Q1 from a closing standpoint, as well as the additional, I'll call it, cash flow that we'll have from operations as we think about also increased organic spend. $1.4 billion, we would expect to start putting that to work in Q2 is when we would expect to do that. You can think about probably greater than $1 billion on share repurchases, you know, with additional optionality as we think about the other $400 million as we get into the back half of the year and see how things develop with our portfolio of bolt-on and pipeline. Great. That's helpful. Maybe, Mark, as a follow-up to that, what are you looking to do with the bolt-on M&A pipeline, strategically, and I don't know however you wanna frame that in terms of, you know, product interest or geographic interest or other objectives? Yeah. We are looking at bolt-on M&A. I would say that, you know, we are exceptionally busy, you know, with our top specialty innovation growth programs across the company and ensuring we deliver on that, as well as building out the circular platform, right? We've now got the project in Kingsport, we've got the announcement in France. We are still working on that third project in the U.S. and making progress on that. That is a huge amount of EBITDA in play for long-term growth from an organic point of view from on the specialty side, you know, accelerated by all this circular opportunity. Bolt-on M&A is a priority, but it is, you know, after those two topics. We do see opportunities in Advanced Materials and AFP. As I've said before, our priorities, you know, remain the same around, you know, ways to open up new markets with compounding capability in a few targeted areas, and especially plastics. The, you know, renewable content of Tritan is opening up new market opportunities in the opaque space and some other more engineered performance dimensions than what we've had in our typical value proposition in electronics and automotive. So a lot of opportunity there that we wanna sort of make sure we can exploit and grow. We're always interested in growing our performance films business and have had a great track record of continued bolt-ons there. That should, you know, continue. Whether it's performance, you know, personal care or coating additives, you know, there's, you know, those opportunities that leverage our very strong position in our technology platforms and our market positions, you know, that we'll look at. It's sort of those four areas and animal nutrition, right? A number of different places where we could consider doing it. But the markets are pretty overheated, and we're gonna always remain disciplined in our capital deployment to make sure we get an attractive return for investors. We'll just have to see, you know, if that gets done. If it doesn't happen, as Willie said, you know, extra $400 million of cash above the $1 billion this year will turn into share purchases. That's helpful. Thanks a lot. We will now take our next question from Mike Sison from Wells Fargo. Please go ahead. Hey, good morning. A quick one on AFP. You're looking for 10% growth versus last year. Any commentary you have for businesses in the segment now, will they all sort of grow in that line, some above, some below? Yeah. First of all, we're really excited to have the new focused AFP, and it is very attractive growth when you look at, you know, what we're guiding to a recast $450 million EBIT last year of the AFP business, you know, excluding tires and adhesives. That is very strong growth. And it really is the same story, just not as extreme as the Advanced Materials story earlier, right? We've got very good volume mix growth in coatings, in personal care, in water treatment, in animal nutrition, in specialty fluids. You know, all of those elements of the market were drivers of growth last year and are expected to continue to be drivers of growth this year. This is also a place where we had a you know unusually high shutdown schedule last year especially you know for the Care Solutions business. You've got just that you know freed up capacity to enable more volume growth on top of market growth as we go into this year. You've got you know restocking 'cause none of these customers had inventory as I mentioned earlier so there's the restocking benefit. There's the innovative growth that is continuing to gain traction here and starting to sort of you know build like what we have in Advanced Materials across coatings and Care Solutions. That's all contributing. You've got spread improvement. Now, this business increased prices a lot faster last year because a lot of their positions are in cost pass-through contracts that track pretty quickly with the raws by definition. Those, you know, prices increased a lot, so we didn't have as much of a spread headwind in this business last year as we did in Advanced Materials. Therefore, this year we're not gonna have as much of a tailwind, but we're still gonna have a meaningful tailwind. Then, of course, you know, you've got the overall net cost structure being considerably lower this year for the company, and AFP will pick up part of that. Then it gets netted off by gross spend. Well-positioned to deliver growth, and it's really across all the segments. You know, coatings, residential, you know, construction's obviously incredibly tight. Automotive has plenty of room for recovery this year. You know, we've got some actually great growth in semiconductors in the coatings business and nutrition is gonna have a very good solid year and personal care is a great stable business with more capacity to sell this year. Got it. Just a follow-up in Advanced Materials. Just curious if you give us a little bit of maybe sensitivity in the $100 million spread recovery. You know, oil is pretty high now, and if inflation gets worse, how does that affect that $100 million? And I guess, would you just sort of make it up in intermediates in the event that happens? The net number would still be pretty good. Yeah. The you know first of all we said greater than $100 million. We have some room for error with some of the more recent inflation to deliver that $100 million. Second, you know, we have good pricing power and a strong demand environment. We just spent you know considerable time talking about how primary demand and our direct customer demand is well in excess of what can be provided. They need to rebuild inventory on top of that. We feel confident in that environment. We have pricing power, and if we see you know raw material inflation go up, we'll increase prices further from where we are today. I think the team's done an excellent job when you look at, you know, the raw material inflation really didn't accelerate until towards the end of August, and by January, we caught up to it. That's actually in the world of specialties, actually very good excellence when you think about the extremity of this inflation we were chasing, to be in a very good position for the first quarter. To be clear, what our assumption is on a full year basis, this year, raw materials and energy are gonna be a headwind relative to last year, which is, you know, basically assuming, you know, those prices remain elevated around fourth quarter. We are also expecting distribution costs to be, you know, a headwind this year, you know, as the supply chain tensions are not resolving anytime soon. The prices we currently have in place, you know, gets you that greater than $100 million tailwind. I think we're in a good position, you know, and, you know, if oil keeps going up, we'll raise prices. Got it. Thank you. We will now take our next question from John Roberts from UBS. Please go ahead. Thank you. Are there any constraints on growing the green textile fiber business? Can we assume that for many years you can convert capacity from cig tow? Are there any constraints on putting more waste plastic into the gasifier to grow the acetyls component of that? Yeah. There, there's no limitation to our ability to grow the Naia textiles business long term. We definitely have tow assets available to be converted, and obviously the tow market continues to have sort of a 2%-3% decline, making additional capacity available. It's just time, you know, and CapEx to convert those lines to you know, make the Naia fibers. We've had some really interesting breakthroughs on the process innovation side to you know, improve our ability to do that in a capital efficient manner, so we're really excited about that. You know, we can definitely sort of convert capacity to grow with the market. When it comes to recycled content, when we look at where we can go in Naia textiles, where we can go in engineered thermoplastics, and especially, you know, plastics, where we could go in food service, and which could be significant volume with our biodegradable polymers. You know, we have the ability, and the microbeads, which isn't very much volume, but very high value. You know, we have plans in place where we can, you know, with reasonable capital, you know, improve the capability of the front of the gasification complex to process whatever plastic waste we need to support all that growth. Should we assume all of the PRT facilities going forward are gonna have a mixed waste plastic processing as well? You've got it in Kingsport, now you'll have it in France. I was thinking before you would basically only have mixed waste in Kingsport and the PRT plants would be really polyester only. No, we'll have it everywhere. It's really important. Just the scale of it will depend on the market and the opportunity that we're pursuing. You know, whatever plastic you get, even if it's, quote-unquote, "all polyester," it's not. When it shows up at the plant gate, there's all kinds of stuff, rocks, aluminum, you know, other polymers that are still in that bale. You really don't want to put that in the plant. You know, to some degree, you've got to have this processing on the front to make sure that what you're putting in the front of the plant is as pure polyester as possible. This is one of the competitive advantages I think that Eastman's gonna have versus our competitors is this is a very efficient process we've developed and patented on how to do that. If you don't have that ability, no matter how good the bale is that's being delivered to you're gonna have a serious conversion problem on what's going in the front end to getting high quality output on the back end. One of the great things that, you know, 30 years of experience got us in working with, you know, a commercial scale plant at, you know, with Kodak and Eastman is, you know, we learned a lot about how to have high conversion efficiency and how to have high energy efficiency. Our plant's capable of a 93% conversion on a polyester level from what goes in to what comes out, which is incredibly high compared to most technologies. You still got to make sure it's polyester you're sticking in the front end. That mixed plastic processing is another competitive advantage that you put together with all of our other advantages that gives us confidence that we can be a leader in this space. Thank you. We will now take our next question from Frank Mitsch from Fermium Research. Please go ahead. Hey, good morning, Mark. I can safely say that you had a more eventful Martin Luther King Day than most people on this call. That looked pretty impressive, that backdrop, to be sure. One of the key drivers for growth in 2022 is the $75 million tailwind from plant shutdowns and operational disruptions year-over-year. I do like slide 16. It shows, you know, kind of the plant shutdowns. But if I'm reading that correctly, that's a $5 million net benefit, and you're talking about $75 million. Is that just the unplanned outages that you had in 2021 or that obviously you're not counting on for 2022? But how should we think about that? I'm gonna let Willie answer a question, but Macron visit was great, and I put myself in lockdown for the two weeks leading up to it, so I didn't get Omicron and couldn't go. But it was. He was impressive, actually, I have to say. He was well briefed, detailed conversation that went for a long time with him around what he wants in the circular economy and how we're gonna be the largest investment in France this year. He wanted to make sure that, you know, the government's doing everything they can to ensure our success. It was impressive to see him spend that, you know, a lot of time with me and actually on the detail of making sure we succeed. It was a good experience. To the cost question, I'll let Willie take it. Thanks, Frank, for the question. To your point, in 2022, there are several significant tailwinds on the cost front. First, it's greater than $75 million versus last year, and that's due to the unusually high planned shutdown schedule. The schedule should be about $50 million relative to that on a year-over-year basis. We also had some unexpected challenges like Winter Storm Uri. Obviously, that seems like a long time ago at this point. If you think about, I'll call it the momentum from 2020, we had to defer you know several shutdowns into 2021 because of COVID. Then also accelerated, as Mark highlighted earlier, debottlenecks and to improve our reliability. It's not just the higher maintenance cost, it's the impact of that lost capacity that we had in 2021 that gives us, you know, the growth potential given the pent-up demand and I'll call it the supply chains that still need to rebuild inventories. Also, there's an $85 million tailwind on variable comp that goes back to normal in 2022. We continue our operations transformations, and we think that'll be another $50 million-$75 million. Now, also, as we enter 2022, inflation is gonna be much higher than traditional. We think that number is probably $100 million-$125 million. As you look at this, the net tailwind is greater than $100 million, and it likely offsets any of the scenarios on CI normalization of margins. You know, in other words, our growth forecast really centers on the belief that we can grow specialty volumes and catch up to the raw material headwinds and also the logistics headwinds that Mark highlighted earlier. On top of that, we'll be buying back shares. Got you. That's very helpful, very detailed. If I could ask a follow-up on the moving of the pricing in specialties up to the level of inflation during this quarter, that you caught up, and I know you're guiding to keep raws flat Q4 2021 through the balance of 2022. If you get a situation that perhaps raws do erode, what's your confidence level in being able to hang on to your higher pricing in the specialties arena? Or how should we think about that interplay? Yeah. You know, it all comes down to sort of why things happen, Frank. You know, if raws are eroding because supply and demand just is a little bit more balanced, but demand is still you know reasonably good, which I think I've covered earlier on our confidence. Mm-hmm ... on why that will be the case, that becomes a tailwind. That would be an additional tailwind relative to our forecast. Great. Thank you so much. We will now take our next question from Bob Koort from Goldman Sachs. Please go ahead. Thank you very much. Good morning. Mark, I wanna start out on the French announcement, the French plant. You mentioned you're gonna have the mixed plastic processing up front. What do you do with the non-polyester stuff? Do you sell that to somebody else that gasifies it or burns it, or where does it go exactly? What we don't use goes back into the recycling stream and ends up being used by another recycling process. For example, most of what would be left over could be used by a pyrolysis plant, and there's several of those kind of projects being developed in France. They could take the material and turn that into you know circular economy for the olefin world. Worst case scenario, it gets incinerated like it does today. You know all this material these days is being incinerated, right? You know you gotta keep in mind that the overall recycling industry has a significant need to sort of improve its infrastructure and its recycling, right? France alone has 600,000 tons of polyester waste. Just over half of that is packaging, the rest is textiles and carpets. The textiles and carpets is incinerated, has no alternative solution until we show up and we, you know, on the polyester side of carpet and textiles, with a solution where it can be recycled. On the packaging side, only about 15%-20% of what is captured, you know, by the mechanical recyclers, you know, actually finds its way back into a bottle. The rest of it ends up being downcycled. you know, as we sort of optimize this system, we're, you know, and the mechanical recycling feedstock, you know, as we've talked about degrades over time, so we have to have, you know, this molecular recycling technology to close this loop. It has to be done because plastic is by far the most carbon efficient product versus other materials. If we're gonna be science-driven, you know, that's where this opportunity is so significant for us. There's a whole ecosystem of recycling infrastructure, Bob, that gets created, and this mixed plastic processing actually doesn't just enable polyester for us, but actually enables a cleaner feedstock for other technologies at the same time. Can you license that technology? It sounds like you've got something that's novel there. Maybe there's a stream, a licensing stream there. Yeah, we're looking at licensing and partnering opportunities because it in itself, you know, can really unlock and enable a lot of, you know, feedstock recycling infrastructure affordably. We are very much, you know, looking at that and how, you know, as part of how we partner with people who are gonna source us feedstocks, and other opportunities. In Kingsport you're gonna use some of your material that to do some Tritan Renew. Would it make sense if you're gonna have a suite of products, one of those being a PET resin plant, to not just send that DMT and paraxylene to an existing PET plant and have them toll it because they could still get the same sort of renewable certificate for it, and then you wouldn't have to spend the capital or maybe have a subscale plant versus a fossil fuel plant? It's unfortunately not that simple. You know, a long time ago DMT is a relatively high cost way to make the intermediate for making PET. It enables a much higher performing product, which is why we use it in our specialty products. It gives you much better clarity and better performance on many dimensions. We're DMT based as a competitive advantage for specialties. You know, the existing PET infrastructure that's in Europe and really across the world for that matter is based on PTA. You can't just swap out the PTA and use DMT in an existing PET plant. You'd have to, you know, spend a significant amount of capital to convert the facility. Once you start looking at, you know, that capital conversion cost, you might as well just build a new plant. It's more. It's a better integrated return. Gotcha. Great. Thanks very much. You bet. We will now take our next question from Matthew DeYoe from Bank of America. Please go ahead. Thanks. I wanted to talk a little bit about Naia and tow and the conversions. I mean, is there a point where converting tow lines can happen at a big enough rate that you'll substantially tighten the tow market? Or is that unlikely or too far out or not the right way to think about it? No, it's a very good question, one we spend a lot of time on. As we look at the Naia tow conversion as well as, you know, before you get to tow, the ability to redeploy flake, you know, the intermediate, you know, the polymer basically that goes into the spinning lines into food service and into, you know, into thermoplastics, you know, creates different ways to sort of redeploy the entire integrated stream and create a, you know, very tight stream relative to where it is today. Yes, you know, there are ways to look at converting capacity on the tow front. There's also new technologies, the next generation technology we're working at that I'm not gonna get into detail now. That would be a different way to make the fiber at a much more capital efficient and advantaged greener way. We're pursuing all those options. Whether it makes the total tow industry exceptionally tight isn't just about us, right? It's also about what happens with our competitors and what they do with their capacity. We're very fortunate to have a long multi-decade history of innovation in cellulosics to all these different specialty applications that allow us to create all these new opportunities for growth, that allow us to keep our stream tight and grow it when you include the specialties with the fiber complex. It's not as clear that everyone else can do the same thing. You know, I hesitate to say that, you know, the industry's, you know, in total is gonna become, you know, extremely tight. I would tell you with the capacity, you know, reductions that have already happened in the tow industry over the last several years and what we're doing, certainly tightening the market in a meaningful way. All right. I appreciate that. You might have kind of answered this a bit in Mike's question, but if I think about kind of the cadence on raw material recapture and AM, I mean, is it really like January you're back? I mean, what quarter are we looking at here where price overtakes raws? 'Cause I'd think things like advanced interlayers could see a meaningful step change kind of day one, just given annual pricing, but I don't know that that's the correct way to think about it. Yeah. Day one of, you know, this quarter relative to fourth quarter, you're gonna see substantial spread expansion with the prices that we've put in place relative to Q4. That's a big driver of the, not just annual outlook for Advanced Materials, but the strong improvement we're guiding to you about Advanced Materials on a Q4 to Q1 basis. Combined with the volume and mix growth, you know, it really is a big substantial step up from where we were in the fourth quarter. Yeah, it's going to start happening right now. It picks up momentum though, so you know, the expansion gets more significant in the second, third and fourth quarter when you look at it on a year-over-year basis for where all the value comes from. You know, not just on spread, but also on volume mix improvement. You know, we were really constrained because we're normally seasonally stronger in the second quarter in volume mix. Last year, we couldn't do that because of the shutdown that we had to do to, you know, do the Tritan conversion. You know, a lot better ability to grow volume in the second quarter as well as spread improvement. AM will actually have a very good, you know, second quarter relative to the first quarter when you put that together. No, it's happening now. Thanks. We will now take our next question from Aleksey Yefremov from KeyBanc Capital Markets. Please go ahead. Thank you, and good morning, everyone. Mark, waste sorting is one of the key steps in recycling. You talked about your experience was proprietary sorting process. In terms of scale, what you've done so far in this area, how much of a scale increase is what you're going to be doing in France or other sites? How much of an increase in operational risk is it? There's really not, you know, much operational risk in the mixed plastics processing part of cleaning up the feedstock before the plant, and it's very low capital in the way to do it. We've already you know are constructing the facility here for our sort of 110 KMT of inbound feedstock to this facility. The same larger scale facility will be built in Europe. What's interesting is it's modular. As we look at this, there's an opportunity to actually do it in multiple locations to be more logistically efficient in how we source waste and collaborate with sourcing partners. We're still debating on how much we do it on site versus closer to where the feedstock is being sourced to get, you know, a more streamlined stream moving across the road to us. There are definitely some de-risk options there with our sourcing partners, our feedstock sources, you know, and how we're trying to think that through. A follow-up on rPET. What is your cost position relative to food grade mechanical rPET? On the pricing side, do you think your customers would be willing to pay a premium for chemically recycled PET versus mechanical rPET? Our cost structures, we're not going to sort of get into debating and discussing sort of detailed cost structures. But what I can say is that, you know, when we look at our cost structure and the pricing, which is being, you know, centered around, you know, the alternative material, which is mechanical recycled content, you know, we are in a very good position to have spreads that will then be sort of locked in cost pass-through contracts, to deliver a greater than 12% return. You know, from a premium point of view, you know, when you think about the quality of mechanical recycle versus our molecular recycled product, our product is much higher quality because you know the nature of unzipping the polymer and purifying it allows us to then have identical intermediates to what we use today from fossil fuels. The products we make, both specialty as well as PET, will literally be identical. No compromise, right? There are quality compromises with mechanical recycle in haze, in color, and its limited ability to be you know recycled over time. You know, we think and believe you know that it's a more valuable product. Customers, I think, understand that. What's interesting is the way many of them are looking at it is, well, our premium, you know, is going to be in this zone. It's actually, you know, likely to be a hedge against the risk of mechanical recycled PET being a lot more expensive. You got to remember, mechanical recycling can't remotely provide enough material for the recycled content targets the major brands have set for themselves in Europe and the U.S. This supply demand situation on the mechanical is going to continue to get tighter. We provide a reliable source of very high-quality product, and we believe that demands a reasonable premium. If we can, let's make the next question the last one, please. We will now take our last question from Laurence Alexander from Jefferies. Please go ahead. Good morning. Two quick ones. Just the level of urgency at customers about restocking. Do you see it as more of a 2022 couple of quarters event, or do you see it as a more drawn-out tailwind that spills into 2023? Can you give an update on your thinking on the carbon renewal platform, specifically given the feedback you've had and the urgency, both you know, political tailwinds and customer interest, what we should see on that front? Sure. On the inventory restocking question, you know, presuming we've got a growing economy this year, around the world, I think that the world is going to struggle to keep up with demand. It's hard to see that anytime soon, we're gonna, you know, the customers or Eastman, for that matter, are gonna get inventories back to where they should be for a more stable level of performance. I think this could drag out through the year and go into next year, especially if the economy is, you know, reasonably good. When it comes to the CRT, you know, a lot of attention on the polyester renewal technology and where we're going with those circular platforms. I'm equally excited about what we're doing with our cellulosics. You know, that's a stream that's core to who Eastman is, been around for you know, almost 100 years. It's amazing to see how sustainability has changed the mindset around these products, right? They've always sold on performance. They've never sold on sustainability until three years ago. Now you've got all these great performance elements in different applications from engineered thermoplastics to textiles to now new, you know, food service, being compostable and microbeads being biodegradable. You know, you've got tremendous amount of growth opportunity across that spectrum of businesses that drive growth in AM, AFP, and fibers. As I said earlier, we're confident in the technology. We've been operating it now for quite some time, and it's been you know, processing plastic waste really well. There are reasonable capital ways to sort of expand that capacity and grow with the, you know, all of these markets. The margins in our cellulosics are the, you know, some of, if not the highest margins in the company. As we grow this stream, you're, you know, getting a nice mix upgrade, not just a volume growth and asset utilization benefit. It's all good. With that, I'd like to just wrap up and just make a couple of quick comments. We're really excited about our strategy to grow the company, believe in the specialty model, the circular platform, the strength of our cash. We think these are all differentiators. What's incredibly important for me to mention and highlight right now is I couldn't be on this call talking about all of this if it wasn't for the employees we have around the world. You know, they've encountered phenomenal challenges in the chaos, you know, that we've, you know, faced with this sort of snapback in demand and how to serve it and get through, you know, incredibly difficult logistics situations, supply chain situations, pushing our plants, you know, incredibly hard, and supporting all of that in every function across the company. At the same time, they were able to, you know, continue our specialty growth platforms of innovation across the company and add a circular platform on top of it to position us for very strong EPS growth this year, and well-positioned to keep it going as we go into the future. I just wanna thank all of them because with COVID and constraints in the work environment, and in particular, I wanna thank the operators out there because, you know, they go into the plant every day since COVID started managing in a very difficult operating environment while having to wear a mask and follow these safety protocols. You know, that's incredibly difficult. They're the real heroes in our company is the operators who showed up and kept customers supplied around the world every day, and they, you know, get my deepest appreciation out of everyone for what we've been able to do. With that, I'd love to thank you for the compliment to all of them, and thank you for your interest in Eastman and have a good day. This concludes today's call. Thank you for your participation. You may now disconnect.