Good morning, and welcome to IPG Photonics' Second Quarter 2023 Conference Call. Today's call is being recorded and webcast. At this time, I'd like to turn the call over to your host, Mr. Eugene Fedotoff, IPG's Senior Director, Investor Relations for introductions. Please go ahead, sir. Thank you, Robin. Good morning, everyone. With me today is IPG Photonics CEO, Dr. Eugene Scherbakov, and Senior Vice President and CFO, Timothy Mammen. Let me remind you that statements made during the course of this call that discuss management's or the company's intentions, expectations, or predictions of the future are forward-looking statements. These forward-looking statements are subject to risks and uncertainties that could cause the company's actual results to differ materially from those projected in such forward-looking statements. These risks and uncertainties are detailed in IPG Photonics' Form 10-K for the period ended December 31st, 2022, and other reports on file with the Securities and Exchange Commission. Copies of these filings may be obtained by visiting the investor section of IPG's website or by contacting the company directly. You may also find copies on the SEC's website. Any forward-looking statements made on this call are the company's expectations or predictions as of today, August 1st, 2023, only, and the company assumes no obligation to publicly release any updates or revisions to any such statements. For additional details on our reported results, please refer to the earnings press release, earnings call presentation, and the financial data workbook posted on the investor relations site. We will post these prepared remarks on our investor relations website following the completion of this call. With that, I'll now turn the call over to Eugene Scherbakov. Good morning, everyone. I am pleased with our performance this quarter. Second quarter revenue came, it is a point of our guidance range. Despite of increased macroeconomic uncertainty, which resulted in project delays and impacted sales and outlook in industrial markets across many geographies. We reported another quarter of solid revenue growth in welding and cleaning applications that were driven by strong sales and e-mobility and handheld welding solutions. Additionally, revenue improved in 3D printing and solar cell manufacturing applications as investment in this market increased. Sales in flat sheet cutting applications declined year-over-year, mostly due to economic uncertainty and increased competition in China, and continued to negatively impact on our results. However, cutting sales were up sequentially in China, North America, and Japan. Emerging growth product accounting for 41% of our total sales in second quarter. We saw continued growth in AMB lasers, LightWELD, Green, and Ultrafast lasers, as well as the beam delivery, but sales declined in medical and advanced applications, as well as in laser-based system and high power pulsed lasers. We have shipped our first 50 kW AMB laser during the quarter and continued to invest in the international sales platforms for LightWELD. As we said on our first quarter conference call, our medical business was impacted by a large customer working through the inventory, which reduced sales in the second quarter. We expect medical sales to return to a more normal level in the third quarter and continue to focus on additional growth opportunities in the medical market. Despite of challenging operating environment, the positive results were driven by our progress in diversifying revenue and reducing our exposure to low margin and high competitive business. We have been focusing on products and applications which benefits from global investment in e-mobility and renewable energy, and this strategy is yielding the good results. IPG had another quarter with strong sales in e-mobility applications, driven by an increase in sales to geographies, outside China, primarily in North America, Europe, and South Korea. EV-related investment in China slowed during the quarter, particularly into traditional prismatic cell batteries. We are seeing the increased investment into new technologies, such as large cylindrical cells, and also more investment in the batteries for storage applications. Our team is working on new business opportunities in foil cutting applications and electrical motor, motor assembly. With continued adoption on electric vehicles and growth in energy storage globally, demand for batteries should quickly catch up with recent capacity additions, and we expect investment in battery manufacturing in China to be stronger next year. Meanwhile, we are seeing the increased investment in EV battery capacity outside of China and expect e-mobility orders to remain strong in the third quarter. Our welding cells are benefiting from growth in e-mobility applications, where our complete solution, which include AMB lasers and welding heads, combines with our real-time weld monitoring and measuring technology, which has become the industrial standard. LDD's real-time measurement can significantly reduce testing time, scrap cost, and failed parts for the customer, making a very strong value proposition, and exceptional return on investment, giving the yield and cost benefits. LDD also getting great acceptance in applications outside of batteries, where the final cost of defect can be very high and lead to significant recalls. We are proud to deliver multiple solution, which can significantly reduce the environmental impact for our customers, including our high efficiency ECO lasers, with industrial leading wall-plug efficiency over the 50%, environment-friendly cleaning solutions, and high efficiency laser dye drying and heating system. During the quarter, we continued to see strong results in our laser cleaning solutions in e-mobility and other automotive and non-automotive applications. Laser cleaning provide substantial benefits, reducing the use of abrasives, chemicals, and dry ice cleaning. Unlike chemicals, abrasive and heat treatment cleaning process, laser cleaning doesn't impact the material that has been cleaned, does not leave toxic waste, and also create a safer and cleaner environment for employees. It can be also significantly reduce water consumption, and we are seeing the increase in interest in our laser cleaning solution for a number of different processes and applications, including the paint and corrosion removal. Another recent thing, introduced laser solution, which is replacing the less efficient infrared bubbles for the drying and heating, is gaining interest, and we have booked our first order for EVB EV battery applications, which will be shipped in the third quarter. The drying solution are well received by customers and are gaining market acceptance because they significantly cut down energy consumption and reduce the environmental impact on legacy processes. Today, I am happy to announce that the Board of Directors has elected Kolleen Kennedy as a new director of the company. I'm looking forward to working with Kolleen, and believe she will be a great contributor to IPG's strategy, particularly with our growth in medical applications, given her 25 years of experience in the medical system manufacturing industry. I would like to thank our employees for their strong contribution in the quarter, and will now turn the call over to Timothy to discuss financial highlights. Thank you, Eugene. Good morning, everyone. My comments generally will follow the earnings call presentation, which is available on our investor relations website. I will start with the financial review on slide for. Revenue in the second quarter was $340 million, a decline of 10% year-over-year, partially due to foreign currency headwinds, which accounted for approximately 2% of the decrease, and the telecom divestiture that reduced revenue by approximately 1%. Revenue from materials processing applications decreased 8% year-over-year, while revenue from other applications decreased 23%. GAAP gross margin was 43.4%, a decrease of 230 basis points year-over-year, due to higher cost of products sold and charges for scrap, which were partially offset by lower inventory reserves, reduced shipping costs and tariffs, as well as an improvement in absorption of manufacturing costs as a percentage of sales. On a sequential basis, gross margin continued to improve as we focused on reducing costs and improving manufacturing efficiency. We also benefited from slightly lower inventory provisions and shipping costs. As mentioned before, FX headwinds also had a negative impact in the quarter. If exchange rates relative to the U.S. dollar had been the same as one year ago, we would have expected revenue to be $9 million higher and gross profit to be $5 million higher. GAAP operating income was $72 million, operating margin was 21.2%. Net income was $62 million, or $1.31 per diluted share. The effective tax rate in the quarter was 24% and was benefited by certain discrete items. Foreign currency transaction expense related to remeasuring foreign currency assets and liabilities to period-end exchange rates had a negative impact on operating income of $1 million, net of a tax benefit, had no material impact on earnings per share. Excluding the currency transaction loss and a restructuring charge, operating expenses declined year-over-year, primarily in research and development and general administrative categories, as we reduced spending on telecom product development, implemented tighter cost controls, and reduced expenses. Moving to slide five. Sales of high power CW lasers decreased 10% and represented approximately 43% of total revenue. Sales of ultra high power lasers above 6 kW represented 50% of total high power CW laser sales, with customers outside of China moving to higher powers. The decline in revenue was primarily due to lower demand in flat sheet cutting applications as a result of softer demand and competition in China. Pulse laser sales decreased 24% year-over-year, as strong growth in cleaning and solar cell applications was offset by lower demand in foil cutting and marking applications. System sales declined 1% year-over-year, with growth in LightWELD offset by a decline in other laser and non-laser systems. Medium power laser sales increased 18%, driven by increased demand in welding and 3D printing applications, while QCW laser sales were down 2% year-over-year. Other product sales decreased due to lower revenue in medical and advanced applications. Looking at our performance by region on slide six, revenue in North America decreased by 11%, with strong growth in welding and cleaning applications, offset by lower sales in advanced and medical applications, lower cutting revenue, and the divestiture of the telecom business. In Europe, sales increased 4%, driven by growth in welding and cleaning applications, despite overall uncertainty in the economy. At the recent laser show in Europe, the tone about business was muted, with most customers expecting a slowdown in the second half of 2023. Revenue in China decreased 28% year-over-year, as demand declined across most markets and applications compared to the prior year, with the exception of cleaning and 3D printing. Moving to a summary of our balance sheet and cash flow on slide seven. We ended the quarter with cash, cash equivalents, and short-term investments of $1.1 billion, and repaid $16 million of debt in the quarter. Cash provided by operations was $67 million, and capital expenditures were $26 million during the quarter. We now expect capital expenditures to be between $130 million and $140 million this year. Our inventories decreased slightly, and we continue to target, target further reduction in inventories during the second half of the year. While maintaining a strong balance sheet, we have been returning a significant amount of capital to shareholders over the last year and in the first quarter. We did not repurchase shares in the second quarter. As previously reported, the board announced a new $200 million share repurchase authorization in May, and we have a new 10b-18 repurchase plan in place. We intend to repurchase opportunistically. Moving to our outlook on slide 9. Second quarter book-to-bill was below 1x. We continue to see uncertain macroeconomic condition and soft orders in all major manufacturing regions. Leading indicators in North America and Europe point to contraction in the industrial markets, while the timing of demand recovery in China remains uncertain. Despite the weaker business conditions overall, the e-mobility sector was not affected in Europe and North America, and we're still seeing solid activity in orders in e-mobility for the third quarter. We expect to see normalizing demand in medical and advanced applications, as well as the systems business, which should help to offset headwinds in the rest of the business. For the third quarter of 2023, IPG expects revenue of $300 million-$330 million. Company expects third quarter gross margin to be between 40% and 42%. IPG anticipates delivering earnings per diluted share in the range of $0.85– $1.15, with approximately 47.5 million diluted common shares outstanding. As discussed in the Safe Harbor passage of today's earnings press release, our guidance is based upon current market conditions and expectations, assume exchange rates referenced in our earnings press release, and is subject to risks outlined in the Safe Harbor and the company's reports with the SEC. With that, we'll be happy to take your questions. Thank you. At this time, we'll be conducting a question and answer session. If you'd like to ask a question, please press star one on your telephone keypad. A confirmation tone will indicate your line is in the question queue. You may press star two if you'd like to remove your question from the queue. For participants using speaker equipment, it may be necessary to pick up your handset before pressing the star keys. One moment please, while we poll for questions. Our first question comes from Ruben Roy with Stifel. Please proceed with your question. Thank you. Good morning, all. Tim, I wanted to drill in a little bit further into the commentary around cutting. It sounded like the weakness was sort of weighted more towards the softer demand than competition in China, but can you remind us where, you know, kind of as a percentage of revenues in China, cutting set stands? Was the comment on competition in China broader? Meaning that did it encompass EV as well? No, the comment on competition in China was really around the cutting market and not around the EV market. We continue to have a very strong presence on foil cutting, cleaning, and welding applications globally. Our cutting within China is certainly a much smaller share of the total sales there now. We had said at the end of last quarter that it was less than 10% of consolidated sales, and it remains quite well below that level, the high power cutting business in China. It was pretty stable from Q1 to Q2, but certainly didn't perform well. I appreciate that. As a follow-up, Tim, can we talk a little bit about gross margin and some of the puts and takes? you know, good quarter here, obviously, we're going into a little bit of a lower revenue environment in Q3. Thinking through sort of the rest of the year, you've got potentially some improving productivity coming up in the new factory in Poland and potentially New Hampshire. How are you thinking about gross margin playing out through the rest of the year? Yeah, we were actually very pleased with the sequential improvement in gross margin following the sequential improvement in Q1. Getting back up to a more reasonable level, certainly below our longer term target level still. You know, in Q3, really, the difference is just on lower revenue levels, the absorption of manufacturing costs will be lower. Going through the remainder of the year, it will really depend upon where the tone of the business ends up and into next year. Hopefully, with an improving outlook, we'd expect to see gross margins pick up again. It, it really is just on the fixed cost base. You start to see some under absorption at the guidance level we're at in Q3. Got it. Thank you, Tim. Our next question comes from James Ricchiuti with Needham & Company. Please proceed with your question. Thank you. Good morning. It, it sounds like you're seeing— you've seen some softening in the EV related business in China. I'm wondering if you could talk more broadly about what you're seeing in the market outside of China. And Tim, maybe you could help size this EV business in Q2, how it's fared, you know, just versus Q1, and, you know, to the extent you can, what that represent— of that EV business, how much is battery welding right now? Yeah, the soften— we are seeing some softness in the demand cycle in China, really related to the capacity additions that have already been built out there. You're also starting to see a transition to more of the cylindrical battery investment. We think that's actually gonna be a big driver next year as capacity utilization picks up. In the rest of the world, the demand cycle for EV has actually been pretty robust and strong. I'd say it's strongest in North America and then followed by Europe. There's good demand out of South Korea and even in Japan as well. It's still dominated by battery applications. We're diversifying the battery applications. Again, we've got the first orders for the drying equipment. We're starting to see some demand for additional foil cutting applications. There are some cleaning applications on some of the main body, in mainly in North America, that's coming from, and there are some complete systems we're selling into that. I'd still say, though, it's still very much battery driven. Motor manufacturing is still a sort of ancillary application in that area. This represents roughly what of your? Yeah. It's still well above 20% of, well above 20% of sales in, in Q2. Okay. Also, we'll see in Europe trend to shift this production, shift production for battery to the final production of cars. You see it definitely for a few— our customers in Europe and also in the United States. Got it. My follow-up question is, on the bookings trends. You mentioned book-to-bill below 1x, and I'm wondering if you could provide any more granularity on that and how it may be varying by region and including, you know, what you're seeing perhaps in the consumer electronics market, which I don't think you mentioned at all in your prepared text. Yeah, we said that it was softer across all of our major industrial geographies, that would be Europe, U.S., and China. We actually had some pretty positive order flow out of Japan, which is holding up quite well. South Korea also performed pretty well, too. You know, it was sort of married up to what you're seeing on some of the PMI data out there. Sorry, Jim, what was the second part of your question? Well, just on some of the end markets. I mean, I assume that or the, the legacy automotive is slower. I didn't hear any comments about some of the other end markets, including consumer electronics, which in the past you've seen some seasonality in terms of orders. What does that market look like for you? Yeah, I mean, that would be reflected mostly in the QCW sales, which were down slightly year-over-year, so there's no great traction in consumer electronics. The other positive areas on applications were really cleaning and then additive manufacturing. Cleaning was very strong globally. Additive manufacturing was okay in Europe and was actually very strong in China, with a couple of the OEMs that we work very closely with there. Additive there, we've been qualified because of the quality and the reliability of the lasers. Cleaning application for us is very important because we are shipping not only pulse laser or CW laser for the such kind of applications, but final systems for cleaning. Thank you. As a reminder, if you'd like to ask a question, please press star one on your telephone keypad. One moment, please, while we poll for questions. Our next question comes from Michael Feniger with Bank of America. Please proceed with your question. Thanks, guys, for fitting me in. The inventories came down 3% quarter-to-quarter, which I know that's been a target of you guys to make improvements there. With book-to-bill less than 1x and, you know, some of these PMIs low, I'm just curious to how you're thinking about inventories in the back half. Do you— do we need to take out more? Are you trying to position, to get to a certain level, to get— to position yourself for 2024? Any ways to kind of think about that in the back half? Yeah, we continue to be very focused on managing inventory, we're not seeing some of the same supply chain issues that we had experienced for the last couple of years. We continue to target bringing inventory down during the second half of the year, you know, and generating cash out of that. You know, in the medium term, let's say we want to get down to less than 200 days inventory on hand, ultimately, you know, get back to a more normalized inventory level, which would be, you know, somewhere around 180 days, that may take a bit longer to get to. Yeah, we're definitely looking to take some additional cash out of inventory and are pleased with the progress that we've made to date this year. Certainly, it's a significant change as compared to the investment in inventory we felt that was necessary last year. Great. Tim, just following up on the question around the production footprint, it sounds like what's weighing on the gross margin, among other things, is the underabsorption that you kind of talked about, the volumes. Are you still confident with the change with the Poland and raising production in the U.S., that with your cost base, as we think about those gross margin targets? Maybe not for obviously Q3 or Q4, just maybe longer term. Definitely, it's our goal to optimize our cost, first of all, for production of some of components like fiber blocks and others for our lasers. Of course, we are working harder on this way. By the way, in Poland, we will increase our production dramatically, and we will increase further to the end of this quarter. The same situation in Italy. We'll also increase our production for these components, and also in Germany. Every time we are, of course, it's under our control to the cost of these components because it's influenced finally, you know, exactly our gross margin. Situation in the United States much more harder because it's an expensive country. Nevertheless, we are looking forward to make final optimization our cost, first of all, for fiber components production. Great. Thank, thanks for that. Then just on Europe, you know, we're hearing from other industrial companies that kind of are flagging a weakening in Germany and Europe the last month or so. Your growth was pretty resilient, even up a little bit in Germany. Just curious what you're kind of seeing there, with the underlying demand versus your ability to offset that it looks like in some areas. Yes, I mean, certainly, you know, during the quarter, Europe was— performed pretty reasonably, and particularly compared to a year ago. It's the weaker guidance reflects some of the softness that other people are seeing. For us, that's translating into Q3. You know, there are positives and negatives, right? Some of the, industrial OEM business is a bit weaker, where some of the welding applications have held up quite well, and things like cleaning are also performing well in Europe. I mean, the PMIs in Europe are at 43. They're some of the weakest they've been for quite a long time. I think that, you know, the German economy is quite weak at the moment, we'll have to see how long it takes for that to turn around. Thank you. Our next question comes from Mark Miller with The Benchmark Company. Please proceed with your question. Thank you for the questions. You mentioned there was a large customer inventory adjustment in the U.S. Could you give a little more color, what type industry was that from? Yeah, Mark, that was the medical applications which we'd called out on Q1, would be weaker in the second quarter. Now we're expecting a recovery in medical application sales in Q3. The customers worked through their inventory adjustment that they signaled to us would happen in the second quarter. Any opportunities, such as in the consumer or consumer electronics area, related to AI you see coming up? I mean, there's some announcements out there that there's one of the major smartphone manufacturers is going to be using more additive manufacturing in their processes. That would be an opportunity for us, given the strength that we have within the additive manufacturing processes around the world. I think, I mean, that would be one of the more significant opportunities that's being talked about. As you mentioned, the consumer electronics investment cycle overall with QCW lasers and even pulse lasers being relatively anemic is not strong outside of that right now. Thank you. We have reached the end of the question and answer session. I would now like to turn the call back over to Eugene Fedotoff for closing comments. Thanks for joining this morning, and for your continued interest in IPG. We will participate in a number of investor events this quarter, and are looking forward to speaking with you over the coming weeks. Have a great day, everyone. This concludes today's conference. You may disconnect your lines at this time, and we thank you for your participation.