Good afternoon. My name is David, and I'll be your conference operator today. At this time, I would like to welcome everyone to the KLA Corporation June quarter 2024 earnings conference call and webcast. All participants have been placed in a listen-only mode to prevent any background noise. After the speaker's remarks, there will be a question-and-answer session. If you would like to ask a question at that time, please press star one on your telephone keypad. If you would like to remove yourself from the queue, please press star two. Please limit yourself to one question and one follow-up. Lastly, if you should need operator assistance, please press star zero. Thank you. I will now turn the call over to Kevin Kessel, Vice President of Investor Relations and Market Analytics. Please go ahead. Welcome to our earnings call to discuss the June 2024 results and the September quarter outlook. I am joined by our CEO, Rick Wallace, and our CFO, Bren Higgins. We will discuss today's results, released after the market close and available at ir.kla.com, along with supplemental materials. Today's discussion and metrics are presented on a non-GAAP financial basis, unless otherwise specified. All full-year references are to calendar years. The earnings material, containing a detailed reconciliation of GAAP to non-GAAP results. KLA's IR website also contains future investor events, presentations, corporate governance information, and links to our SEC filings, including our most recent annual report and quarterly reports on Forms 10-K and 10-Q. Our comments today are subject to risks and uncertainties reflected in the disclosure of risk factors in our SEC filings. Any forward-looking statements, including those made on the call today, are also subject to those risks, and KLA cannot guarantee those forward-looking statements will come true. Our actual results may differ significantly from those projected in our forward-looking statements. I will begin the call with some introductory comments, followed by Bren with additional financial highlights, including our outlook. Let me turn the call over to our CEO, Rick Wallace. Rick? Thank you, Kevin. I will cover a few business highlights for this quarter. KLA's June quarter revenue, gross margin, and EPS were all above their respective guidance midpoints. Quarter played out mostly as expected, with strong customer demand and solid company execution. We continue to see signs of a strengthening market environment for customers at the leading edge and remain confident in our plan for steady improvement throughout the remainder of this calendar year and into 2025. This quarter, KLA results returned to sequential and year-over-year revenue growth, demonstrating an improving industry environment. Foundry logic, the continuation of scaling and incorporation of new technologies, and slowly rising capital intensity continues to be a long-term tailwind. In memory, technology development investments supporting AI, high bandwidth memory, and the improving supply-demand environment support an expected return to growth for memory markets in 2025. The June quarter also marked another quarter of strong performance from our portfolio of Broadband Plasma, or BBP products, which we also refer to as Gen 4 and Gen 5. This year marks 40 years of innovation for our BBP patterned wafer inspection business. We continue to see significant differentiation, keeping this product line at the forefront of defect discovery for the semiconductor industry. We expect this product family momentum to continue delivering strong relative growth performance in calendar year 2024. AI continues to be a driver and enabler for KLA's business. AI adoption is driving higher volume wafer manufacturing, more complex designs, larger die and chip size, and growing advanced packaging demands, which support an increase in process control intensity. Last quarter, we estimated that the KLA opportunity would reach approximately $400 million in annualized revenue exiting calendar 2024. Today, we're raising that estimate to more than $500 million in total advanced packaging revenue across the entire KLA portfolio on the momentum we are experiencing. Additionally, AI is enabling KLA to further differentiate our products and make continuous improvement in the performance of our systems. KLA's service business grew to $614 million in the June quarter, up 4% sequentially and 14% year-over-year. Utilization rates of existing installed capacity are steadily rising across all business segments as end market demand improves. Finally, quarterly free cash flow was $832 million. The last twelve-month free cash flow was $3 billion, with free cash flow margin of 31% over the same period. KLA results continue to demonstrate our sustained process control leadership and the success of our broad portfolio and specific product strategies. In this industry environment, KLA will continue to focus on supporting customer requirements, executing on product roadmaps, and preparing for growth at the leading edge. I'll now hand the call over to Bren to go through the financial highlights and outlook. Thanks, Rick. KLA's quarterly results demonstrated our market leadership, combined with the consistent execution of our global team. KLA continues to show resourcefulness and the ability to adapt to meet customers' changing requirements. Quarterly revenue was $2.57 billion, above the guidance midpoint of $2.5 billion. Non-GAAP diluted EPS was $6.60, and GAAP diluted EPS was $6.18, both above their respective guidance midpoints. Gross margin was 62.5% at the upper end of the guidance range, as a richer product mix than modeled and higher revenue volume drove upside to guidance. Operating expenses were $553 million. Operating expenses were comprised of $324 million in R&D and $229 million in SG&A. Operating margin was 41%. Other income and expense net was a $32 million dollar expense, and the quarterly effective tax rate was 12.6%. Quarterly non-GAAP net income was $893 million, GAAP net income was $836 million, cash flow from operations was $893 million, and free cash flow was $832 million. The company had 135.3 million diluted weighted average shares outstanding at the end of the quarter. The breakdown of revenue by reportable segments, end markets, major products, and regions can be found within the shareholder letter and slides. Turning to the balance sheet, KLA ended the quarter with $4.5 billion in total cash, cash equivalents, and marketable securities, debt of $6.7 billion, and a flexible and attractive bond maturity profile, supported by strong investment-grade ratings from all three major rating agencies. Moving to our outlook, we believe our business is transitioning from a period of stabilization to a resumption of growth, which began in our June quarter, that we expect to continue through the remainder of calendar 2024 and into 2025. For calendar 2024, we remain encouraged by the improvement in our customers' revenue and profitability over the course of this year. This improvement will ultimately translate into new investment in capital equipment to support semiconductor growth over the medium term. Our high-level outlook for the industry remains largely unchanged. Our expectation is for the WFE market to be in the mid-$90 billion range, and that the second half of the calendar year will be stronger than the first half. While to really be overly specific on expectations for calendar 2025, we do expect a year of growth, fueled principally by growth in leading-edge investments in both logic foundry and in memory. Given KLA's business momentum, we are confident in our relative performance opportunities moving forward. KLA's September quarter guidance is as follows: total revenue is expected to be $2.75 billion ±$150 million. Foundry logic revenue from semiconductor customers is forecasted to be approximately 80%, and memory is expected to be approximately 20% of semi-process control systems revenue. Within memory, DRAM is expected to be about 83% of the segment mix, and NAND the remaining 17%. Gross margin is forecasted to be in a range of 61.5% ±1 percentage point, as higher revenue volume is offset by weaker anticipated product mix. Consistent with our comments last quarter, based on the current industry outlook, top-line growth expectations for calendar 2024, higher forecasted growth in services and expected system product mix, we are still modeling non-GAAP gross margins to remain relatively stable around the mid-61% range. Variability quarter-to-quarter is typically driven by product mix fluctuations. Operating expenses are forecasted in the September quarter to be approximately $565 million, as we continue to make important R&D and scaling investments to support expected revenue growth. Looking ahead, we expect approximately $10 million-$15 million incremental growth in quarterly operating expenses for the remainder of calendar 2024 and into 2025. This is supported by our revenue growth expectations and in line with our 40%-50% incremental operating margin business model. Other model assumptions for the September quarter include other income and expense net of approximately $34 million expense. GAAP diluted EPS is expected to be $6.69 ±$0.60, and non-GAAP diluted EPS of $7 ±$0.60. EPS guidance is based on a fully diluted share count of approximately 135 million shares. In conclusion, our business has transitioned from a period of stabilization to one of growth. We remain optimistic that the indicators of improvement we have seen will continue throughout the remainder of calendar 2024 and into 2025. KLA is focused on delivering a differentiated product portfolio that anticipates customers' technology roadmap requirements and drives our longer-term growth expectations. With the KLA operating model guiding best-in-class execution, KLA continues to implement strategic objectives which are geared to drive out performance. KLA's focus on customer success, delivering innovative and differentiated solutions, and operational excellence is what drives industry-leading financial and free cash flow performance and allows us to return capital consistently. Return of scaling and increasing complexity has solidified our confidence in the increasing importance of process control in enabling technology advancements. This is not just in improving time to results and process integration and fab ramp, but also in optimizing yield across a volume production environment with high semiconductor device design mix. This bodes well for KLA's long-term growth outlook, as near-term industry demand trends are continuing to improve. In alignment with this, KLA's business is improving, and the long-term secular trends driving semiconductor industry demand and investments in WFE remain compelling. That concludes the prepared remarks. Let's begin the Q&A. Kevin? Thank you, Bren. Operator, we're ready for you to provide instructions and begin the Q&A section. Absolutely. At this time, if you'd like to ask a question, please press star and one on your telephone keypad. If you wish to remove yourself from the queue, you may do so by pressing star and two. We remind you to please unmute your line when introduced, and if possible, pick up your handset for optimal sound quality. In the interest of time, we ask that you please limit yourself to one question and one follow-up. We will now take our first question from Vivek Arya with Bank of America Securities. Please go ahead. Your line is open. Thanks for taking my question. Very recently, TSMC said they expect the number of new tapeouts for 2 nanometer in the first two years to be higher than what they saw for 3nm and 5nm in their first two years. And I think they've also heard a number of AI customers accelerate their roadmaps. I'm curious, what does this mean for KLA in terms of your outlook and kind of your share of the WFE wallet? And do you expect 2 nanometer to be a bigger factor for 2025 or for 2026? Thanks for that. Yes, we're, we're definitely having those same conversations with our customers in terms of in the reticle world. Of course, when there are more design starts, we see activity in the reticle market in terms of inspection for those reticles and then early lots. We're still early in N2, and in terms of your question, it's really going into 2025 and then 2026. But the other thing we've seen is strengthening in N3 as well. So I think both of those factors are being driven by some of the same drivers we talked about in the prepared remarks in terms of what we're seeing from AI driving that. So it does lead us to believe that our goals to increase our% of WFE continue to be supported by the opportunities afforded by the additional process control challenges. So I think we're in pretty good shape with that. The other thing, of course, that's being driven in some of these advanced AI chips is larger die size, which, as you know, are a bigger challenge from a yield perspective and creates more incentive for more inspection, especially as these processes are brought online and ramped up. So mostly what we see is it's 2025 leading into 2026 in terms of when they reach HBM. Bren, anything to add? No, I think the you covered most of it, Rick. I would say also one of the things that we're encouraged by that with the design start environment, given the high mix of parts, that our participation with our customers in terms of process control and monitoring that happens in production tends to be at a higher level. So they're trying to manage a robust design environment that's testing design rules in different ways, and that tends to be positive for continuous process control investment as they ramp the node. And remember, Vivek, earlier in the year, we talked about a more positive tone we were seeing from our customers, and it was related to the early demand that they were starting to sense from their customers. And that's why we believed, and that's how it's playing out, that we would see strengthening in our business. Maybe what's new - a little bit new is the strength, additional strength in N3, which wasn't as forecasted as the rollout of N2. So I think both of those are adding to our belief that we're in a good period for consistent acceleration and demand on the leading edge. Got it. Now, on advanced packaging, you raised it from $400 million-$500 million. I wanted to clarify, is that on an existing full year basis, or is that for the full year? So just that clarification, then how would you break it out in terms of specialty and inspection, metrology? Yeah, it's a good question. So that's our expectation for the business level in 2024. So it isn't a run rate necessarily, but what we expect to do, which is significantly above what we did last year, which was closer to $300 million. So, a mid-60% growth rate, with continuing momentum. I would think that we would continue, at least through the first half of next year, to see strong demand around packaging. So it's really an opportunity for us. Certainly, we're seeing a lot of customer interest as we're seeing more and more focus on front-end capability moving into the back end. So it's an encouraging opportunity moving forward. I think the growth rate relative to the growth rate of WFE will be higher over the next few years. So, one of the things, Vivek, I'm sure you've heard, is that one of the bottlenecks now for AI is silicon is part of it, but the CoWoS is also part of what we're seeing. And we had customers for the first time in my career, from the front end, start pulling us into packaging conversations because they want front-end capability, as Bren said, being used in packaging to assist. So I think, you know, when we talk about AI being a driver, it's really driving not just the silicon, but also packaging and also, of course, HBM for you need all three of those to fully execute on the plans people have. So to your question on mix, about, let's say 60% of it is process control, and then you have the remaining 40% is in our process, specialty process business, and also some exposure in terms of, of chemical process control as well. But about 60% of it in the classic semiconductor process control part of our business. Thank you. We'll take our next question from C.J. Muse with Cantor Fitzgerald. Please go ahead. Your line is open. Yeah, good afternoon. Thank you for taking the question. In your prepared remarks, you talked about returning to growth for memory in 2025. I know it's early but would love to hear kind of your initial thoughts, and maybe separating DRAM versus NAND, and then within DRAM, you know, how you're seeing HBM conversion versus DDR5 and greenfields, and same for NAND layer counts versus any sort of expectations for greenfield in the 2025 timeframe. Well, 2024, 2024 is really a transition year for memory. We're not seeing a lot of growth overall. Some in the DRAM front and some investment that's happened in China. So I think from a WFE point of view, 2025 is when we expect to see more growth there. I think that you talked about the drivers, particularly around DRAM and HBM being drivers into next year. I think as we see our customers' business models improve, and we're certainly seeing the financial performance improve, with pricing going up so significantly over the course of this year, that that will translate into investment as we move into next year. I think on the flash market, we're less bullish into next year, although it's operating off a pretty low level. We'll see as we get closer to it, but. But right now, we, we do see a recovery in both parts of it, but certainly led, led by more DRAM than, than flash on a, on an absolute, WFE basis. Yeah, and, and I think much like some of what we saw in the early discussions of AI last year, where we didn't really see an increase in silicon because there was still utilization leverage that our customers have. Some of that's in memory, so we really don't see capacity starting to be added significantly until 2025 and into 2026 around HBM. So as Bren said, conversion, but then you don't get the capacity till later, and it's really HBM-associated DRAM before you see flash. Very helpful. And then as a follow-up, again, in the prepared remarks, you talked about confidence in your relative performance, and obviously, no question around the foundry logic side, you know, given the complexity and larger die sizes. But curious, as you see increased memory into the mix, is there enough share of wallet on the logic foundry side to kind of mitigate that and allow that relative outperformance? We'd love to hear the kind of puts and takes around that. Yeah, we feel pretty good, C.J. I mean, we're seeing relative performance this year, and this is a year that's still pretty heavy overall in what I'll call legacy levels of investment, particularly in China. So as we start to move to leading edge, and you see the N3 ramp, but also the initial investments in N2, we would expect that given our position, particularly in certain markets, that we expect to scale and grow much faster than the overall, that we're pretty well positioned into next year to see foundry logic leading edge investment drive KLA's share of the overall spend. We were talking about DRAM and HBM, and HBM is a device that tends to, first of all, you have advanced DRAM, so you have EUV as a, you get the introduction of or use of EUV with those chips. But also, as you start to put the chips together, it creates not only potential packaging opportunities moving forward, but you also have increased sampling to ensure that each of the DRAM die is functioning properly. So we've seen DRAM improve from a process control intensity point of view since the introduction of EUV, and so I would expect to see that continue as well as we move forward. So yeah, I think we feel pretty good about the relative positioning of the company, as we move into next year. So C.J., one of the things that we're seeing, and we haven't seen in many, many years, if you remember, part of the reason memory had lower adoption was because of repair. And it seems that on leading DRAM, repair is less effective than it's been. And so that is a factor that's driving some of our customers. Obviously, they're gonna try to get through that, but that's. They're expecting that they're gonna have larger need for a greater need for process control because of that. And as Bren said, you also have, because of EUV, you get the introduction of print check into memory, and they have they have issues associated with pellicle. So I know it's very much into the weeds, but it drives more print checks. So the process control adoption is setting up to maybe be better than historical levels, at least for the advanced DRAM. Very helpful. Thank you. We'll take our next question from Harlan Sur with J.P. Morgan. Please go ahead. Yeah, good afternoon. Thanks for taking my question. As the team steps into the second half of this year, advanced technology node deployment is accelerating, obviously reflected in your strong guidance for the September quarter. Appears to be reflected in your confidence on the spending outlook this calendar year and growth into next. Near term, does the team anticipate sequential growth in the December quarter? And then relative to, let's say, last earnings call, has your qualitative view on 2025 improved? I mean, I know Rick, you mentioned incrementally better 3 nanometer investments. Any other indicators that are coming in better versus your prior expectations as you look into next year? Yeah, Harlan, I'll start here. First, we do expect sequential growth into the December quarter, as we discussed last quarter when we talked about the March quarter being the bottom and an expectation of sequential growth through the year. So that's how we see things into the December quarter. We'll see how things play out in terms of what that looks like. I would say on the margin, we're incrementally more bullish, certainly when you look at the funnel in terms of opportunities into next year. As we've seen that fill out, we have seen strength in the funnel to support our outlook into next year. Perfect. Then for my follow-up, this is sort of a follow-on to what Rick was saying, but as you mentioned, you know, memory has always had a lower process control intensity, but there are dynamics that are pushing advanced logic-like capabilities right into memory. You mentioned, you know, more EUV layer adoption in DRAM, but like, for example, in HBM DRAM, I mean, that's requiring this very advanced logic chip that sits at the bottom of the stack, right? That's using advanced CMOS logic technology. In NAND, you know, the periphery and controller chip, which is increasingly becoming more advanced logic, is being processed separately from the NAND stack, right? And then bonded together. And then this whole NAND sort of bonding technology process appears to be a nightmare from a manufacturability and yield perspective. But taken in totality, I mean, it does appear that these dynamics are driving memory process control intensity higher. I mean, any way to quantify? I know historically, memory intensity has been about 10%, but if you look at all of these trends over the next few years, like, where can you see that memory intensity sort of trending to? Yeah, it's a good question, Harlan, and you did cover all the advancements that have us pretty excited in terms of opportunity moving forward. We have seen intensity improve over the last couple of years or so, but what we're waiting for to lean in, if you will, into those to that improvement is to see a full cycle in terms of investment by our customers. And so I think as we look into next year, I think that where we are today is probably where it's historically around 10%, that we're probably in excess of 11% today. And I think moving forward, if we can execute and deliver some of the products and capabilities we have in development here, I think it creates a number of opportunities, covering the things you talked about and some of the other things we talked about in the last question or two. Yeah, and just contrast that from a few years ago, Harlan, if you go back and you think about 3D. You know, 3D happens. Mm-hmm. And our customers go backwards in lithography, right? DRAM's not really pushing design rules, nor pushing advanced logic around the DRAM, and repair is still working. Like, you take all those factors off and you get more into the expected growth and intensity that you get in logic or in the leading-edge foundry for similar reasons. But, so we haven't fully modeled it because it's really hard. You know, customers are still trying to figure it out, but there's more characterization happening at the leading edge, leading us to believe that there's going to be more implementation. But until they've been through the cycles, they don't know. But it is, to Bren's point, why we feel, feel more bullish. In our engagement in those customers, they've recognized an increased need for the, for the process control capability. And then you just add on this bonding packaging question, and that's a huge issue. And, you know, the value of HBM is so high also. So I, I think there's a lot of factors. In many ways, there, there are plenty of opportunities. The other part of that answer is making sure that our solutions actually are going to work for those opportunities, and we're still proving that out. Perfect. Thank you very much. Thanks, Harlan. We'll take our next question from Harlan Sur—or I apologize, from Atif Malik with Citi. Please go ahead. Your line is open. Hi, and thank you for taking my questions. The first one to Rick on gate-all-around PDC intensity. Some of your peers have talked about 30% increase in metrology intensity on 2 nanometer gate-all-around over 3 nanometer. And the reticle inspection peers have talked about EUV mask that's actually coming down to 20% from 30% from 3 nanometer. So, when we put these two trends together, I'm curious how you're looking at your overall PDC intensity, and does that imply that you're gaining share on the reticle side? So let me unpack that a little bit. I, I think that it is definitely the case for gate-all-around, that it creates new integration challenges. And so we've seen, and we've talked about this for some time now, the adoption of Gen 4 to support that in a new configuration to be able to resolve the issues around that. So that's a driver. It's also a different approach than what customers have to use for the- because the architecture has changed. There's more metrology intensity being used and largely an increase in the need to control voltage thresholds, so VT control becomes more important. And so that's also part of it. You also just have film thickness, measurement, and management higher. So overall, we would anticipate, but that's all kind of rolled into how we model the increasing process control intensity that we've outlined before. There's really nothing that's different than when we modeled that going forward toward our 2026 plan in terms of overall process control intensity and our share performance there. Atif, if you look back to the last local high in KLA share at WFE, it was when the industry transitioned from planar to FinFET structures. So typically, architecture changes do drive, because of just the change that's happening and the immaturity of the change, it does drive process control intensity to a higher level. So you know, historically, it's proven. So Rick talked about not only the inspection opportunities, but you're depositing a lot more layers, you know, 20%-30% more critical layers on the metrology side. So we think in a number of areas, it's going to create opportunities. And you still have the scaling dynamics, while litho layers are constant, those are still pretty challenging layers in terms of from a defect control point of view. So we're pretty bullish about the opportunities, and I think it's feeding into a lot of what we've said here over in the last few questions in terms of our confidence moving into next year. Great. And as a follow-up, Bren, the revenue guide is a bit wider than usual, ±$150 versus $125. Is that just a function of high revenues or is it something else? Yeah, a function of higher revenues. It's about, you know, 5% or so. At some point, as we move through the different quarters and revenue ranges, we start to make an adjustment just because of the higher levels. So there's nothing indicative in that other than, you know, the revenue's up 9% higher, and we decided to. Well, it was 9% in June, and then the guidance is another 7%, so that it was prudent to raise the range. You have to also remember that we do have invoices that are quite large. If you think about our Broadband Plasma systems, they could be anywhere, you know, even plus $20 million, depending on the configuration. So, you know, tools moving in and out can, you know, have an impact in terms of our overall. So it's really more just the increase in revenue level and not related to anything else. Thank you. We'll take our next question from Chris Caso with Wolfe Research. Please go ahead. Yes, thank you. Good evening. I guess first question is on the trends that you're seeing in mature node and, you know, specifically, well, I guess, China, China revenue in general. I think your prior comments were an expectation for China about flat in the second half. Can you talk about if that's still your view, and, you know, what you're seeing, you know, outside of the leading edge? Yeah, it's still my view, and that's the absolute dollar basis, right? And then with the second half growing relative to the first half, the percent will start to move in the second half versus the first half. But on an absolute dollar basis, as I said last quarter, it's about flat. Now, it you know, depending on, you know, what happens, you've got a lot of new projects and rev rec could be an issue with newer customers. So where it shows up in terms of which quarter, I'm not gonna comment on, but if you just take a step back and look at a half to half point of view, it's very similar to what to what I said last quarter. Got it. And then, you know, following on, you've made some comments about the impact of high-NA in the past. I mean, one, could you remind us a little bit about the impact of high-NA on process control? And then secondly, you know, with regard to timing for that, you know, there's been some noise around that about, you know, sort of implementation schedules. You know, anything different than you see on your side, and I, you know, recognize that you folks would probably be a little bit earlier, you know, in seeing that, you know, given the timing of when you'd sell process control. Well, I think that the difference for high NA, the most obvious difference is you're gonna continue with scaling. So you're gonna get smaller defects, and you're gonna have new challenges associated with reticle qualification, and that takes the form both in the mask shop and re-qual and in print check. So all those factors continue, but it's really an extension of the trends that we've seen. And when you get high NA, you'll get also, just the mix will shift. You'll have some layers initially of high NA, and then you'll have others that are gonna be the 0.33. I think what we're hearing and seeing from customers is very consistent with what we believed in terms of when HVM happens. We don't see any acceleration in the timing. If anything, there's the potential for, for delay in terms of the HVM implementation. There will be characterization work happening before that. But like all technology transitions, you know, we see the existing technology often extends longer and has more upgrades and is more cost effective, and that's what drives customers. Ultimately, it's about the economics. And so I think what will happen is if they can do that, then they'll bias toward extending the life of the 0.33, and the efficacy of that in the leading edge, and then high NA comes after. So nothing's really changed in our view. No acceleration, if anything, potential for some, some additional delay in the implementation. Got it. Thank you. We'll take our next question from Krish Sankar with TD Cowen. Please go ahead. Your line is open. Yeah, hi. Thanks for taking my question. I have two of them. First one is actually on China, and Rick and Bren, thanks for the insight on the China revenues. I just kind of wanted to ask the question a different way. You know, one of your peers, ASM International, today said that China mature nodes are in a digesting mode and currently Q1 was the peak. I'm kind of curious, are you seeing that? And how to think about China's sales into next year, especially giving you long lead times, you might have a better insight than others. And also, is that a factor in your gross margin down just a smidge in September quarter? And then I have a follow-up. Yeah, Krish, on China, it looks like, like I said earlier, I think from a half to half point of view, it's relatively flat. So I don't see any, you know, real change. A lot of that's dependent on project timing, given the level of greenfield activity that we're seeing there. As we move into next year, my early view on our business levels is more or less consistent with what we're seeing this year. I think when you look at the order funnel, what we have in backlog, what we have in deposits, gives me some confidence in terms of what we'll see into next year. So I don't see a change. Obviously, you know, the mix could, is- will be changing. There's infrastructure investments. There's obviously the logic boundaries, memory, and so on. But from an overall level, it seems that it's pretty consistent year to year. On gross margin, you know, while we outperformed in the June quarter, it was a little bit more than what we had initially modeled in the quarter. There's some adjustment that we're seeing in the September quarter from that. When you look at KLA gross margins, I talk a lot about product mix being the biggest driver of our gross margin in terms of variability quarter to quarter. It's not customer mix, it's not region mix, it is the portfolio mix, and not all the products in our portfolio came to carry the same margin profile, but also within the product families themselves, and particularly when you're selling across multiple nodes with highly configurable systems, you can end up with, with, with varying gross margin profiles, even within the same product families. So it's really a function of that than it is, anything else. And of course, you know, the, the June quarter was stronger. I did put the comments, which are very consistent with last quarter, in terms of expectations for this year, in the mid-61% range. That's our expectation. Then, you know, moving forward, as we see the business continue to grow into 2025, I think you'll see KLA's general incremental gross margin performance in and around that 65% incremental gross margin, plus or minus, as we move forward here. But in any given quarter, it could add a little bit of variability. But nothing that's different than what we usually see. Got it. Very helpful, Bren. And then just a follow-up on the advanced packaging. Thanks for the color. Like, you know, the $5 million run rate from $400 million, like, three months ago, is this really a function of the advanced packaging market growing? Or are you, like, targeting newer markets like macro inspection, which I feel like, you know, your, your peers or your competitors are doing better in that. Are you, like, targeting those markets that's also helping some of this incremental revenue growth this year? And also kind of curious if you can extrapolate that into, like, panel-level packaging, which is probably like a few years out. Thank you. Yeah, I think there's no question that the packaging market is growing, and it's for all the reasons that you hear. I think that there's been acceleration, and again, I mentioned earlier in the call that some of the gaps, if you think about what's going on overall with AI, are packaging shortage related. So there's a lot of investment happening there. It is not—it's not just macro, it's what historically would have been considered pretty advanced lithography, not that—or inspection, not that many years ago, because the design rules and the yield and the what's at risk cost-wise is much higher. You know, many years ago, when we bought a company and started doing some packaging, one of our customers asked: "Why are you even bothering? This is not a KLA market." What happened in the last year is now customers are saying: "We need your capability that you have in the front end to be applied into some of our advanced packaging challenges," and accelerated workshops with us, talking about that, accelerated product roadmaps, and a lot of customer excitement and interest. So they're driving it very hard because they have shortages, and it's, it's really across many of our products, both in our processing but also in our process control. So it's been significant to see the growth and the speed of it. As we said, that's the annualized, that's the annual number for calendar 2024, but we'd expect the trend to continue toward growth in 2025 and beyond. Yeah, most of our growth has been more on the logic side, and I think one of the things we're excited about moving forward is that as you move in high-bandwidth memory to hybrid bonding techniques, that you do increase the complexity of the process a fair amount. And as you know, the KLA position in the market is one of, you know, higher value offerings supporting more complexity. And so, we're encouraged by what those opportunities might look like as we get out into the, you know, into the 2026 and 2027 time frame. Obviously, you know, the industry's, you know, thinking a lot about what's next in terms of panel-level packaging and so on, and so there's obviously R&D that goes into that. But, you know, that's so that's work that we will be doing in the company, and so I think that those opportunities, to Rick's point, are just showcasing, I think, what's the opportunities that are available in this part of the market over the next several years. Just one final point. Some of our customers, you know, our competitors are coming at this from a lower end, and in many cases, the requirements are at the top of the top end of their capability. And so what we're hearing from customers is, even though in some cases they're buying our systems, what are at the bottom end of our capability, what they also want is the roadmap. So I think they want the ability to buy that capability now, with the expectation and the knowledge that they can upgrade it over time as their requirements continue. Because you are now, with that packaging, there's no question that roadmap is going to look more like a traditional scaling roadmap going forward. Gotcha. So it's future-proofing. Thanks, Rick. Thanks, Bren. Very helpful. Thank you. Thanks, Krish. Thank you. We'll take our next question from Joe Quatrochi with Wells Fargo. Please go ahead. Yeah, thanks for taking the question. I just wanted to kind of understand, you know, I think looking at the guide for the September quarter and thinking about sequential growth into the December quarter, is it more fair to assume now you're kind of thinking about, you know, low double-digit, half-on-half growth rate for the calendar year relative to the high single-digit last quarter that you talked about? And then, you know, kind of dovetailing on that, I think last quarter you talked about process control systems mix as being closer to, like, 70% for foundry logic. Is that maybe a bit higher than that now? Yeah, so on those fronts. So again, I don't want to guide December, but I think, you know, high single digit, low double digit is probably the right way to think about our performance for the year overall. So, you know, I think that, you know, as we saw in June relative to the expectations we had a few months ago, we did better than we thought. September guide was higher, certainly higher than what consensus was. So I think the incremental optimism I talked about earlier in the funnel is revealing in some incremental growth here through the second half of the year. When I look at the overall mix of business, I think that foundry logic is likely closer to 75%. So last year was 70-30 on approximate semiconductor process controls, shipment or revenue to semiconductor customers. It's closer to 75-25, and 2024. But we'll see how it, we'll see how it ends up. Perfect. That's helpful. And then as a follow-up, the N3 strength you're talking about, I mean, given the lead times for Gen 4, Gen 5, I mean, is that going to kind of enter the model in terms of demand into next year? Is that how we should think about that, or can those, some of those tools be pulled into, to 2024? Well, we are seeing more capacity come online. Those are products where we've been supply constrained, certainly around Gen 4. So as new capacity comes online, I think it's one of the challenges for us, frankly, back in 2023, is we were limited. And as we've moved through this year, from a quarterly run rate point of view, we are getting incremental capacity, supply, and that, given the supply constraints and the level of demand, we are seeing growth there and would expect to see that continue into next year. So, I'm fairly bullish on that part of the business growing faster than the overall market, both this year and next year. So, I think that's one of those areas, as I said earlier, about our relative confidence in terms of share of the overall market, is our presence in certain markets that are growing extremely fast relative to the overall, and certainly high-end wafer inspection is one of those. Thank you. We'll take our next question from Toshiya Hari with Goldman Sachs. Please go ahead. Your line is open. Hi, thank you so much for taking the question. I wanted to double-click on China and what you're seeing in the region. You guys gave a lot of color in terms of what you're expecting for the overall geo. But by application, any standouts as you think about DRAM, foundry, other applications, or maybe by customer type, you know, mask making, wafer making, et cetera? Whether it be, you know, trends you saw in the first half, or as you think about the flattish outlook into the second half, any standouts, standouts to the positive side or the negative side? Yeah, DRAM was stronger in the first half than it will be in the second half. I would expect that wafer's probably a little weaker. I think on the reticle side, it's a little bit stronger, and then foundry logic is stronger, offsetting the weaker memory. Some weakness and not about it. Got it. Thank you. And then as a follow-up on your services business, you guys grew 14%, year-over-year, and you're outperforming your peers, and I think that's off of a higher base relative to your peers, too. So really good to see that. You talked about growing toward the high end, for the remainder of the year, if I'm not mistaken. Is that just simply, you know, utilization rates, across your customer base improving, or is there more to it? And as a quick follow-up, is 12%-14% still the right range? Yeah. So utilization rate is certainly a factor, so we've seen those steadily improve across all segments over the course of this year, and so that's been a driver of incremental revenue. The other thing, and we had pretty good visibility to this, was the shipments that we or the tools that we shipped in 2021 and 2022 have come off of warranty and gone into contract. And our contract renewal or attach rate is about 95%. So as those tools go off of warranty and into contract, that's a driver. So we've had pretty good visibility into the service business. We got a headwind from FX, because you do have some of the service revenue denominated in local currency, particularly in Japan. So there's been some headwinds to the growth rate, frankly. But yeah, we're trending towards that 14%, sort of top part of the guidance range, and I think the mark, the target we put out there, and I think as we go over the next couple of years, I feel like we're closer to the top end of the range than the bottom end of the range. Thank you, Toshiya. Thank you. We'll take our next question from Joe Moore with Morgan Stanley. Please go ahead. Great. Thank you. I also had a couple of China follow-ups. At one point, you had had a pretty sizable multinational business in China. Is the business today mostly dominated by the China sovereigns, I assume? Yes. Very, very little multinational business in China. Okay. And then on the China sovereign side, I mean, having seen that business shift to more of a trailing edge focus, you know, what's happened to process control intensity? I mean, you seem to be keeping pace with all of your competitors in terms of China exposure, so you seem to be doing quite well. I might have thought that the process control intensity would drop off, given the focus on leading-edge technology. Sure. It's definitely not as high as what you would see on leading edge, but often in the case, if you have small, relatively size-wise, small sites, then you're not really up against a huge number of wafer starts. So, that's one factor. The other factor is some of the infrastructure that people are adding in terms of whether it's mask shops or wafers. So in aggregate, that's why it's. for us, it pretty much helps serve. Great. Thank you so much. Yeah, Joe, on the multinational question, I mean, most of that business is service, right? We're not really- Mm-hmm. There's no real equipment business that's happening with our multinational customers there, but there is service activity supporting those fabs. Got it. Okay, thank you so much. We'll take our next question from Srini Pajjuri. Please go ahead. Your line is open. Thank you. Hi, guys. Actually, one question about 2025 WFE. Rick, you know, obviously demand is improving, you know, across the board, and China is stable, so that makes sense that WFE will grow next year. I'm just wondering, in terms of, you know, in your assumptions, what sort of assumptions are you making, as far as, you know, the CHIPS money is concerned? Because the check seems to be coming in in the second half. Just wondering, you know, if you are getting any explicit signals from your customers that that money is being spent in 2025. Yeah. Our forecasts are entirely independent of any CHIPS Act money. There's no dependence on that. If our customers receive that, it's gonna be they're gonna be getting it, what they tell us, is to offset cost of building fabs in places that are more expensive. But it's not contributing to that they're gonna build, they're gonna build capacity based on demand. The demand is gonna be based on their market and the overall market, and then they'll buy equipment accordingly. But we're not counting on our customers to get their back money to make our plans. Okay. Thank you. And then, more of a technology question, Rick. You know, I time to time get questions about APMI for mask inspection. My understanding in that is that you guys were involved in that market and maybe exited at some point. I'm just curious. Maybe I'm wrong here, but I just wanna get your thoughts on that as to, you know, how you're approaching that, you know, market and what your strategy for that market is. Yeah, we have not, we're heavily involved in the reticle market. It's a market that, you know, really we started the company with, and we're still involved in it heavily. The question on, do you need actinic inspection for reticles, has been a long debate that we've had, and our conclusion, based on all the analysis that we've seen, is the real market need for that is when high-NA gets introduced. Because at the existing technology nodes, there's really three ways to deal with the problems. One is, the challenges of reticle quality. One is the flagship product line that we've had for a long time, the 6xx, and extensions to that. The other one is an E-beam product that we've talked about, that's being used for very high resolution, and right now it's the highest sensitivity reticle inspection tool. Still, with our customers, we're still in the characterization of that tool. That's the 8xx. And then the last one is printing onto wafers and verifying the goodness of the reticles, and that's what we're using, basically using the Gen 5 Print Check application for. When it comes to investment in the actinic or the product that we've identified for high NA, we're pretty confident of our ability to intercept the high volume manufacturing of high NA, which is still some years away. Thank you. Very helpful. We'll take our next question from Brian Chin with Stifel. Please go ahead. Hi. Good afternoon. Thanks for letting us ask a few questions. Rick, you talked about inflections and sequential and year-over-year revenue growth. Are you also seeing this in terms of bookings, and did your 12-month shippable RPO increase this quarter? So we'll have all the specifics on that in the 10-K that we'll file here in another week or two. It was pretty close to flat, down about $70 million quarter-on-quarter, so pretty flattish, compared to last quarter. And, you know, I think given what we're seeing in the funnel, I would expect it, yeah, likely to probably over the next few quarters, we'll start to see it increase. But yeah, just slightly down from last quarter. Okay. That's helpful. Then I guess, you've made a lot of disclosures in the past couple of calls about advanced packaging, and you saw even a step up on the year forecast over the past three months. Can you sort of ballpark how large the advanced packaging process control TAM is? You're probably not at your kind of typical, on average, 50%-60% market share in process control overall. But, you know, maybe a sense of what the starting point is now, and obviously, I'm sure you expect the market to grow and probably your share as well in the years ahead. So I'll let Bren deal with the specifics, this is Rick, but it's not just process control for us, it's also process tools, because of the SPTS acquisition we did about five years ago. Yeah, and look, right now our view is that this part of the market will grow faster than overall WFE. So if you look in the long run, you know, as we expect WFE over the next few years, the capital intensity slowly rising to grow a little bit faster than semiconductor revenue, that this part of the market will likely grow faster than that. So that's the only quantifying we've done at this point. To Rick's point, we have a broad portfolio. We're seeing parts of it on the inspection side move upmarket, but we also sell a number of process tools. We also sell some chemical process control capability as well. So we're approaching this market in multiple ways, and like I said, I think that the. As we talked about earlier, in the memory part of the market, as it relates to HBM, we think we're better positioned relative to some of the technology transitions that are coming, in terms of our share opportunity moving forward. Good. Great. Thank you. We'll take our next question from Blayne Curtis with Jefferies. Please go ahead. Your line is open. Thanks for taking my question. I had two. I wanna ask you on the outlook for EPC. I think you were looking for growth last time. Might have came in a little bit below. Just curious, since we're going through all the calendar 2024 forecasts, if you could update that one. Yeah. On specialty semiconductor, quarter to quarter, it dipped a little bit in the June quarter, but that's more of a timing issue. I think our expectation in that business is still some modest growth for the year. That business has a pretty diversified market exposure, and as power semi-related automotive has come down, we've seen packaging pick up, but there's a little bit of a dip in June, but recovers and has a much stronger second half. Flat panel business is where we announced our exit of that, and so we still have revenue in our plans for that as we exit that business and would expect end of manufacturing, likely in Q1 of 2025. On the PCB front, which is more consumer-centric, we still have. That market's been relatively sluggish. It's-. You know, it's improved a bit, but not much, and that's obviously tied much more to mobility. And so improvements into the future as we see more cell phone unit growth will drive that business. Now, that business had a very strong 2021 and into 2022. A lot of capacity added during that, that COVID period, and so the industry is still working off some of that capacity. Now, in that business, we do have service exposure, so we have pretty good contract penetration in the PCB world. So while the systems business has been slower, there have been service contributions from a revenue point of view that we've had over the last year or so. But I would think that overall, the aggregate part of that business is up, you know, a few points year-over-year. I think it's, you know, we'll call it low to mid-single digits. Thanks. And then I just wanted to ask you, I know there's been a couple of questions on China. I heard from others that you're hearing less new names and, you know, I think the thought was maybe it would be more build-outs of facilities that were already in process. You talked about greenfields there, and obviously there's another slug of money potentially coming in. So as you look out a year or more, I'm just kind of curious how you think about that frenzy we had before of all these new names that you never heard of before, you know, creating companies. Are you seeing any view that might come back? Well, there's still some new business from new customers. The other thing that's happening in China is you do see investment from our mature legacy customers in China. And so, where you know, we've been engaged in supporting those customers for many, many years, and their businesses are typically, you know, driven by supplying for specific markets and in a response to expectations of demand moving forward. So you do have those customers also, you know, investing more here, I think, moving forward. And then, you know, you do move into second phases with certain ones, but there's also some new ones, too. So it's a pretty broad mix as I look at the remainder of this year and into next year. Gotcha. Thank you. Thank you. We'll take our last question today from Tim Arcuri with UBS. Please go ahead. Thanks. I had two. So, Bren, my question on China. So there's been some recent news. Obviously, the U.S. Department of Commerce is trying to use the Foreign Direct Product Rule against some of the, you know, non-US suppliers, and it would kind of suggest that maybe there's some forthcoming news that there's a reason why they would want to use the FDPR, like maybe some Entity List additions. So how do you think about that? I know it's kind of hard for you to even, you know, handicap your guidance for that, and I assume that you're not accounting for that at all because you don't even know, like, you know, whether or if that's going to come. But how do you kind of think about that and what the likelihood is, and, you know, how to even handicap for it? Yeah, Tim, I mean, there's been a lot of news for some time, and so you're right. I can't participate here in speculation and hypotheticals about what could or could not happen. So, you know, we will continue to assess. We work very closely with the U.S. government. Of course, we do everything we need to do in the company to be in compliance. We'll follow the laws we do, and we'll support our customers as well, within the confines of whatever the regulations are. So, if and when something happens, we'll assess the impact and let you know what the impact is in sort of the near term and what might be, you know, over the long run. Well, one of the, the things we talked about a lot, Tim, and I, I know you know this, is the... Because of where we are with the AI drivers, we're seeing an acceleration at the leading edge. So if we think about what's really going to propel our business going forward, it's not so much the legacy, which has been maybe overrepresented on historical levels the last few years, but it's the stuff we're seeing right now, especially at the leading edge in, in terms of leading-edge foundry, and that's been driving a lot of our business, and our expectations around what we're seeing in N3 and N2, plus the packaging, plus we're seeing in, in HBM. So if I think about 2025, 2026, those are going to be the things that, that drive KLA, drive our performance, and, and should drive, good opportunities for our investors. If you go back to 2022, 75% plus of our business was what we'll call leading edge, advanced design rules, you know, 20 nanometer or below. So, you know, with the expectation of a ramp into next year from our our more leading-edge customers on the logic and memory side, you know, we think that that's going to drive the performance of our business as we move over the course of next year and beyond. Okay, and then last thing. So, you know, book-to-bill, based on the RPO, book-to-bill is just a touch below one, so this is the seventh quarter that it's been below one. And it sounds like you think book-to-bill is going to start to drift up actually, that we're going to finally start to be above one. So is there some dynamic where, you know, it, it seems like there was this, you know, massive slug of bookings that, you know, happened back in mid 2022, and we've been kind of, you know, shipping off of that ever since. Are we kind of getting to a point now where you think that, you know, customers are kind of coming back in, and they're, and we could begin to see, you know, Book-to-Bill start to drift above 1, you know, where we can, you know, start to not just be shipping off of this big slug of orders from the middle of 2022? Yeah, I think based on the funnel, that we will see, you know, I think the order profile looks pretty good. Now, you know, orders are not always indicative of what's going on, given, you know, the number of customers and the size of the orders, and then when it comes to KLA, even the size of the ASPs of certain types of products. But all that being said, yeah, it went from about $13 billion at its peak, in terms of RPO, down to just sub-$10 billion today. So, it's still quite large, but I would expect that moving forward, that at least over the next couple of quarters, it looks that the order profile looks decent. So yeah, I think that's a reasonable way to see it. Thank you, Tim. I'll now turn the floor back over to Kevin Kessel for any additional or closing remarks. All right. On behalf of KLA, we appreciate your time and your interest. We'll be seeing many of you through this, throughout this quarter at different conferences. If you have any follow-up questions, please do reach out to the KLA Investor Relations team. With that, I'll turn it back to the operator to conclude the call. This concludes the KLA Corporation- June quarter 2024 earnings call and webcast. Please disconnect your line at this time, and have a wonderful day.