Good morning, everyone, and thank you for participating in today's conference call. I would like to turn the call over to Mr. David Brenner as he reads the company's safe harbor statement within the meaning of the Private Securities Litigation Reform Act of 1995. That provides important cautions regarding forward-looking statements. David, please go ahead. Great. Thank you, Peter. Welcome to PureCycle Technologies third quarter earnings conference call update. I'm David Brenner, Chief Commercial Officer, and joining me today are Chairman and Chief Executive Officer, Mike Otworth, Chief Manufacturing Officer, Dustin Olsen, and Chief Financial Officer, Michael Dee. This morning, we will be highlighting our corporate developments for Q3. This presentation will be available on our IR page of our website, purecycle.com. Many of the statements made today will be forward-looking and are based on management's beliefs and assumptions and information currently available to management at this time. The statements are subject to known and unknown risks and uncertainties, many of which may be beyond our control, including those set forth in our safe harbor provisions for forward-looking statements that can be found at the end of our third quarter 2021 corporate update press release and in our Form 10-Q, both of which were filed yesterday, as well as in our other reports on file with the SEC that provide further detail about the risks related to our business. Additionally, please note that the company's actual results may differ materially from those anticipated, and except as required by law, we undertake no obligation to update any forward-looking statement. Our remarks today may also include non-GAAP financial measures. Additional details regarding these non-GAAP financial measures, including reconciliations to the most directly comparable GAAP financial measures, can be found in our slide presentation and in our third quarter 2021 corporate update press release issued yesterday. You're welcome to follow along with our slide deck, or if joining us by phone, you can access it at any time on purecycle.com. We're excited to share updates from the previous quarter with you, and I will now turn it over to Mike Otworth, PureCycle Chairman and Chief Executive Officer. Mike? Good morning, and thank you for joining us. As David stated, today we'll be reviewing highlights from our third quarter. We will review updates to progress on our feedstock strategy, the launch of our Pure Zero program with the Cleveland Browns, discuss the location of our first feedstock preprocessing facility in Florida, provide an update on our Ironton plant, discuss our FDA letter of no objection, and we will then dive into our customer pipelines. Now moving to slide number three. On slide three, you'll see that our 2021 Q3 highlights include wins across operations, feedstock, commercialization and finance. I'll take a few moments to highlight a couple of key areas for you. Executing operationally remains at the heart of everything we do here at PureCycle, and despite a challenging supply chain environment, our Ironton facility remains on track to begin operations in Q4 of next year. We recently approved a series of additional investments in Ironton that are designed to both de-risk operations and broaden our processing capabilities to handle an ever wider range of feedstocks. In Q1, we outlined our feedstock strategy regarding how we would target post-consumer feedstock and build an awareness for the value of number five polypropylene plastic. I'm excited to report that we are executing that strategy and have identified over 1.6 billion pounds of feedstock. Since last quarter, we've signed six LOIs accounting for 168 million pounds of feedstock. These LOIs will help supply our first preprocessing facility in Central Florida. Additionally, we have developed and launched our PureZero program geared toward helping make stadiums, entertainment venues and retail more sustainable. We launched this program in partnership with the Cleveland Browns, and we couldn't be more thrilled about this partnership. You know, we intend for this to represent an actionable pathway for similar organizations to progress their sustainability ambitions. We launched our first commercial product with EC30, a Procter & Gamble brand that is built around sustainability. We submitted our FDA letter of no objection in September and progressed customer discussions representing 277 million pounds across existing and new market segments using a feedstock plus pricing model. Lastly, from a finance perspective, we're ending the third quarter with $494 million in total cash and investments and have spent $45 million progressing our key projects. Moving to slide four. You can see PureCycle continues to expand our global footprint in the markets that offer the best opportunity. We're progressing toward definitive agreements with our previously announced MOU partners and continue to evaluate additional opportunities. Slide five, we highlight evolving consumer trends that drive demand for sustainable products. As mentioned, our first commercial product hit the digital shelves with EC30 shampoo dispenser, made of ultra-pure recycled polypropylene produced from our Ironton facility. EC30 was really the perfect partner for our first product launch as they are equally focused on offering truly sustainable products with the smallest carbon footprint. This type of product demonstrates to brand owners our resin's ability to deliver exceptional aesthetic and mechanical properties that meet both sustainability goals and delight the consumer. Consumers don't want greenwashing. They don't want corporate greenwashing. They don't want greenwashing of any type. They expect companies to deliver high-quality products with high percentages of recycled content. This launch proves that PureCycle products deliver on both points. Now Dustin Olsen, our Chief Manufacturing Officer, will discuss our execution progress across these goals. Dustin? Thank you, Mike. As you can see, we continue to expand our footprint in the United States and around the globe. Our first commercial facility in Ironton, Ohio, is well underway and expected to be operational in the fourth quarter of 2022. This facility will produce 107 million pounds per year of ultra-pure recycled resin. In the second quarter of next year, in preparation for the startup of the facility, we plan to begin Ironton feed prep operations. This will be a significant milestone for the company. During the third quarter, PureCycle approved additional investments at Ironton focused on de-risking and process expansion, which increases the total project cost by $30 million-$40 million relative to the initial budget. Approximately two-thirds of the additional costs represent an investment to process higher percentage of feed contaminants and process safety design improvements, while the remaining one-third represents an escalation in base material pricing. PureCycle has deployed a strategy for constructing plant lines that is designed to allow us to reduce the construction risk and scale more efficiently. To that end, we have invested capital to expand our construction capability to handle the build-out of three full plants concurrently and also deployed the Born Digital platform to streamline all construction and operational readiness activities. As we look forward to plant operation next year, we have hired approximately 15 operators and staff over the last six months. These individuals represent critical operational roles for phase two in Ironton and are in line with our operational readiness plan. Our process safety management and training development is also on track. Our phase one Augusta OSBL and ISBL line engineering activities are complete, and efforts to progress detailed head start engineering for the long lead equipment is in process. We have engaged our key long lead strategic suppliers to ensure that our timeline is secured for mid-2023 startup. We are also finalizing engineering, procurement, and construction contracts and expect site work to begin in Q1 of next year. Over the last quarter, our European expansion efforts have focused on site selection. We have identified five suitable locations, identified feedstocks, and intend to leverage the data used for our FDA no-objection letter submission in preparation for engaging the European Food Safety Authority, EFSA. We also made significant announcements in Q3 as it relates to our expansion into Asia-Pacific, and we continue to progress our memoranda of understanding with SK geo centric in South Korea and Mitsui in Japan to definitive agreements. Our Augusta, Georgia facility announced in July is the future home of five purification lines with space up to eight total lines. Our first five lines are designed to represent a nameplate capacity approximately 650 million pounds annually when fully constructed. We have spent much of the last quarter building out the financing package and are working to close our offtake and feedstock arrangements. The details of the project financing will become clearer as the debt is finalized, but for now, we are assuming multiple debt draws to finance five purification lines. We are currently in the process of building purification plants that will process our goal of 1 billion pounds of polypropylene waste by 2025. As you can see on slide eight, we are on the path of achieving that goal. We have provided specifics about capacity by quarter and also revised the production ramp bar to show the timeline for nameplate capacity. You will note that we are on track for production, and that timing depends on securing debt financing. As additional operations are established, we will add them to this chart to map the detailed timeline. I would also like to highlight the strength of our modular manufacturing strategy. In a global environment where numerous projects seem to be behind schedule and with significant cost surges, we have been able to work closely with our suppliers to limit global interruptions to schedule and cost overruns. Over the last few months, you've heard us talk more and more about this prep concept. I'd like to take a few minutes to highlight what a feed processing facility is and why it's important to PureCycle. Our preps will be regional preprocessing facilities that sort, wash, and densify feedstock to prepare for purification. In Ironton, our preprocessing facility is co-located with our purification line and is designed to process film, fiber, and mixed rigids with a capacity to deliver over 126 million pounds per year. Our recently announced Central Florida facility, which is expected to provide feedstock to our Augusta purification plant, is designed to process mixed rigids. We anticipate being able to process 75 million pounds per year initially, and then we expect to scale to 150 million pounds of capacity. We plan to initiate commercial operations in the third quarter of 2022. We also signed an MOU with Titus, a secondary MRF operator on the West Coast, to supplement feed supply to both Ironton and Augusta while building a supply source for our third U.S. location. This will ultimately serve to diversify our overall feed system. Our preps allow us to do a couple of critical activities. First, our preps allow us to build strong regional relationships that might be cost prohibitive with a centralized strategy. Second, our preps allow us to customize facilities based on the feedstock in the region. Third, our preps allow us to minimize our carbon footprint by only shipping polypropylene to our purification facilities. Next, I would like to share how Tamsin Ettefagh, our Chief Sustainability Officer, is charting a path to 1 billion pounds of polypropylene. Over the last six months, we have grown our team across several pillars to begin building our feedstock network. We are optimizing our search across multiple feedstock lanes in conjunction with our feedstock procurement strategy. We are building PureCycle's relationship in the marketplace. This effort has resulted in identifying over 1.6 billion pounds of feedstock. During this quarter, our team has signed letters of intent for 160 million pounds of feedstock. We are executing against our strategy to secure feedstock from diverse suppliers across the United States and are proactively seeking to acquire three diverse types of waste streams. The first is post-consumer curbside. PureCycle's ability to process this stream opens a wide variety of contaminated feedstocks. As such, we have identified 270 million pounds of feedstock opportunities. 10% are diverted from landfills or incineration. We currently have 30 million pounds contracted and 14 million pounds signed under letters of intent. The second pillar is post-consumer non-curbside. This post-consumer non-curbside stream. We are targeting and look to implement circularity programs. To date, we have identified 1.1 billion pounds of feedstock opportunities, 50% of which are diverted from ending up in landfills or incineration. With this stream, we have 80 million pounds of feedstock contracted and 154 million pounds signed under letters of intent. The third feedstock lane is post-industrial. Here we are targeting volumes direct from industry and brokered waste opportunities. To date, we have identified 225 million pounds of feedstock opportunities and have 100 million pounds of feedstock contracted. We watch the price and availability of feedstock options very closely. Since the PureCycle technology can handle a wider variety of feed streams, it gives us the option to optimize into or out of feed streams. As an example, today, market prices have recently risen for post-industrial waste, and we are in the process of evaluating the segment for the best opportunities to yield high volume at the best price possible. Partnerships are a key component to our overall strategy to build awareness of PureCycle and what that means for sustainability. It's a strategy that allows us to multiply our efforts to secure feedstock, work with brands on commercial products, and help us raise awareness of PureCycle's work to tackle the plastic waste crisis. We see an opportunity to increase the awareness of PureCycle's technology and increase the recycling efforts to a broader group by tapping into feedstock across sports stadiums, conference and entertainment venues, and even retail. We launched our PureZero program this week with an exciting partnership with the Cleveland Browns as their plastic recycling partner. PureZero is our approach to maximizing recycling and minimizing the environmental impact on these venues. PureCycle sustainability teams have examined the level of plastic waste generated, and we see considerable opportunity to not only secure feedstock, but also forge long-lasting strategic partnerships. PureZero is just the start of our innovative approach to feedstock and raising awareness for sustainable plastic. We are working with top entertainment and content creators to bring messages to kids and families across the United States through a partnership with EXPLR Media. Today, we are producing a series of episodes on plastic waste and PureCycle's work. Our aim is not only to energize the next generation of STEM and eco-driven consumers, but also to make PureCycle a household name. The commercial team continues to make progress in building our pipeline with new customers and establishing the visibility of PureCycle products in the marketplace. This is a unique time for sustainability, and PureCycle is positioned to help eco-focused brands meet their sustainability goals. Early in our evolution, we saw strong interest in the packaging and consumer goods space. As sustainability has grown from an insulated segment to a global mandate, we're starting to see interest from a broader market vertical, like health and auto. This slide 14 highlights the broad applications that have been made from our resin, including the first commercially available PureCycle product. From blow molding to injection molding to thermoforming parts, we're targeting a broad range of applications to prove the versatility of our resin. We are fortunate to have strategic partners who see tremendous potential for our resin and value it brings to their customers. We know the significant potential that our like-new plastic can provide the market, and we continue our pursuit of executing on the objectives we need to bring ultra-pure recycled plastic to brands and consumers alike. With that, I will introduce Michael Dee, our Chief Financial Officer. Thank you, Dustin. On slide 15, we will begin with our liquidity position of $494.1 million. This is cash on the balance sheet. Of this, in blue on the right, you will see $273 million of restricted cash, and in green on the left, $221.1 million of unrestricted cash. Now, the restricted cash is set aside for the Ironton plant, and that totals $156 million, in addition to three reserves totaling $114.8 million and $2.2 million of other. These reserves are required under our bond agreement. Our unrestricted cash of $221.1 million is sufficient to continue operational activities and is expected to be supplemented with additional project financing as we build out in Augusta, Georgia. I would note that the additional $30-$40 million that we anticipate spending in Ironton will be spread out over the coming year and will be funded from unrestricted cash. In slide 16, we review the third quarter liquidity and changes from the prior quarter. Of the approximately $45 million of capital spent in the third quarter, $27.9 million, or 62%, was spent on Ironton construction, which remains on schedule for expected completion in Q4 2022. $7.7 million, or 17% of the total spend for the quarter, was spent on increasing our feed prep and future capacity. Included in this $7.7 million are $2.5 million to acquire the Winter Garden pre-proc processing location, $2.9 million for the pre-processing facility in Ironton, and a $2.3 million investment in preparation for the Augusta build. Finally, $9.3 million, or 20%, was spent on operating expenses. This includes $4 million for payroll expenses, $1.4 million for third-party service providers, $900,000 relating to our digital strategy, and $2.9 million of other expenses, including rent and insurance. In summary, we are continuing to meet our commitments. We're staffed with very highly experienced talent. With our engineering nearing completion for Augusta, we will be initiating the project financing process this quarter to raise the capital to begin the procurement of the long lead time items for Augusta. Now let me turn it over to Mike Otworth again, our CEO. Thank you, Michael. You know, PureCycle is changing the game when it comes to plastic waste, and not just in an incremental way, but in a truly transformational way. We offer more than just ultra-pure recycled resin. We offer an opportunity for businesses to create truly sustainable products and fully close the loop on plastic. Now I'm gonna focus on a few key takeaways. First, our flagship facility in Ironton is well underway and is expected to be operational in Q4 2022, with a projected capacity to produce 107 million pounds of ultra-pure recycled resin. I can't stress this enough, our team has been and continues to be laser-focused on commissioning of plant one in Ironton. We heavily invested in purification capacity, optimization for our Ironton plant. You know, we're continuing to do everything possible to minimize risk and ever increase the possibility that everything will start up there as planned and on time. We're deploying a feedstock strategy that aims to diversify our supply. LOIs this quarter equate to 168 million pounds of feedstock. We're actively decentralizing our feedstock intake process so we can more easily and cost-effectively collect plastic waste from across all U.S. regions. As Dustin mentioned, we opened our first satellite pre-processing facility in Central Florida, and we expect to have the capacity to produce up to 150 million pounds of plastic waste there. We expect to break ground and begin construction on the Augusta plant in the first quarter of 2022, with the first of five purification lines expected to be completed in the second half of 2023. We have a strong customer pipeline with 277 million pounds of offtake and active discussion. As promised, we submitted our letter of no objection to the FDA in September. We also saw the first PureCycle product hit the digital shelves with EC30's shampoo dispenser, which I now have one sticking on my shower wall. We've developed and deployed our PureZero program to target plastic waste at stadiums, entertainment venues, and even at retail stores. The first team sports to adopt this program is the Cleveland Browns, and I anticipate the Browns will be the first of many. At PureCycle, we know that a more sustainable planet starts with people and their relationship with the environment. More than ever, consumers are putting sustainability at the top of their list when it comes to where they shop and what they buy. The consumer data tells the story, and we know it's not just us who see the enormous potential in PureCycle. We know there's major consumer demand for companies to truly tackle the plastic waste crisis, not just check a box to say they're green. What we're creating at PureCycle is more than plastic that can be infinitely sustainable. We're giving our customers and potential customers an opportunity to be deliberate when it comes to creating sustainable products that put our environment at the forefront. Thank you for your time this morning. We'll now open the call up to questions. As a reminder, to ask a question, you will need to press star one on your touch-tone phone. Again, that is star, then the number one. To withdraw your question, press the pound key. Please stand by while we compile the Q&A roster. Your first question will come from Noah Kaye with Oppenheimer. Your line is open. Oh, good morning. I have a number of operational financing questions, but we need to start with the disclosure in the 10-Q last night around the SEC investigation. What can you share with us in terms of color on the investigation? What can you share with us around scope, and possible around the timing that you might be expecting for a resolution of this and any confidence you can give investors at this point regarding the matter? Thank you, Noah. It's Michael Dee. Let me give you the best answer that I can. As we disclosed in our 10-Q, at the end of September, the SEC issued an investigative subpoena to the CEO of PureCycle requesting testimony in connection with an investigation. This investigation is a non-public fact-finding inquiry. We are disclosing this because we feel it is important to be transparent and to inform our shareholders of the existence of this matter. It is important to note that the fact-finding nature of this investigation does not infer any conclusions that any violations have occurred. The nature of a subpoena and the investigation itself is not judgmental and does not indicate a negative opinion of either the recipient or the facts of the matter. We will fully cooperate with the SEC. I'm sure you can appreciate that we are not able to take further questions on this at this time. Thanks, Noah. The next question. All right. Okay. I will move on, I guess. Your next question will come from Gerry Sweeney with Roth Capital. Your line is open. Thanks for taking my call. Sounds like Noah got cut off there. Anyhow, I had a question around the process improvements at the Ironton facility. I understand that the processes allow a higher amount of contaminated material to go through, but the question I had revolved around if there's higher contamination in that feedstock, does not equate to a lower amount of purified polypropylene coming out the back end. I'm just curious as to how this works and then also maybe what your expectations are on a return for this investment. Sure. Yeah. Yeah. Thanks. This is Dustin. With respect to the investment that we're making in Ironton or the incremental investment we're making in Ironton, first of all, it doesn't have any impact on the back-end capacity for polypropylene production. In fact, what it really does is it opens up the spectrum of feed that we can bring into the facility, and gives us an opportunity to, let's say, diversify the feed slate and be more, you know, selective with the cost profiles of the feeds that we bring in. It's partially that. The second piece of this is really a way to improve the operation and the process safety management of the facility. That effectively has no capacity implication on the plant, but it improves the overall reliability of the final operation. Okay. Switching gears to the SK geo centric Mitsui MOUs. I think in the press release, you stated that they're moving forward. Do you have any update on terms of timing, how far along these agreements are from maybe finalization? Any comment on that front? Yeah. Thanks for that question. Yeah. I'll say that the discussions with SK are going very well. SK and Mitsui are going very well. We're progressing across multiple lanes to answer all of the questions that they have about our company and about the technology to get them comfortable with what we want to do together going forward. At this point, we don't have a, let's say, a detailed timeline to share yet, but I can assure you that the discussions are going very well and we're making good progress on all fronts there. Final- I would just add that it's. Yeah. The reaction that we're getting as a result of their respective technical teams coming here has been overwhelmingly positive. There's good momentum behind those relationships. I think that's really all we can say with regard to timing. Got it. Final question. Also in the presentation, I think there was a comment that said for the Augusta facility, you know, on time, but I think that hinges on finalizing financing, project financing. How is that coming? Is there any concerns that this may be delayed or not come in as you expected? Maybe like debt-to-equity type of ratios. Yeah, thanks. Dee, it's Michael. We are just initiating the process. Given that we only recently announced Augusta, we have been working on the engineering well in advance of making that announcement. As the engineering work begins to finish, we then have the ability to go out and engage in discussions on conducting that project finance. We have capital to begin the process as we already have announced, but we do wanna get the project financing and done, so we will be initiating discussions with both intermediaries and banks this quarter in order to get that started. We take great comfort in the fact that even before there was a merger, PIPE convertible and all the financings that we did last year, we raised $250 million of debt in the public tax-exempt market. As I mentioned in the last quarter, those bonds have traded extremely well, trading up approximately 15-20 points from where they were issued. We feel we have a very solid credit curve out there that investors will be able to look at. Thank you. Got it. That's it for me. I appreciate it. Thank you. We have a follow-up question from Noah Kaye with Oppenheimer. Your line is open. Thank you. Regarding the FDA NOL, I was wondering if you could share your current expectation on timing. Obviously, you know, you filed with the FDA, but what might be a reasonable expectation in terms of, you know, hearing back and getting that letter of no objection? David Brenner, do you wanna answer that? Absolutely. This is David Brenner, Chief Commercial Officer. As we mentioned, we submitted it in September. We anticipate that we would have a response by the end of the year. But again, you know, the actual time that it'll take the FDA to provide a response to our submission, you know, could vary. We're hoping for the end of the year, but that could vary. Okay, great. Turning to the contracting for the offtake, you know, just looking at the slide 1three, showing that you have the split of allocated versus contracting versus early discussions, up to 625 million pounds. I guess it'd be helpful to understand the activity behind that. You know, you've probably got prospective customers coming in, looking at the Ironton plant. If you could give us some more indications on where some of the contracting discussions are going, what's being indicated in terms of the pricing structure, you know, are more folks entering the plants now? Just give us a flavor of how demand is trending. Yeah, it's a fantastic question, Noah. You know, from our standpoint, you know, one of the things that we've really been able to do over the last couple of months is host more and more of these prospective customers at the FEU, which has been problematic over the last two years due to COVID. As it relates specifically to your question around both the early discussions and contracting, we follow a very straightforward process when we engage with a customer, where we essentially talk about the key terms that are comprised of our long-term offtake agreements. We spend a number of weeks discussing what those key terms are. One of the central pillars of all of our agreements is this feedstock plus model, which is essentially a fixed price plus the cost of feedstock divided by yield loss. This really allows us to mitigate the volatility that has existed over the last six months for the price of recycled polypropylene or a bale of polypropylene. Then from there, once we sign a term sheet or have agreement on that term sheet, we provide a small sample for additional testing. Once that sample and that test is complete, we either simultaneously are progressing the commercial agreement or we then sign that commercial agreement. I would describe, you know, the state of discussions today as, you know, a very strong pipeline with a number of those customers that are acknowledged on the key terms and are working towards the final details on the commercial agreements. Okay. On the feedstock side, it sounds like the largest quantity in terms of LOIs is for post-consumer non-curbside. Now, are those generally number five or any mixed bales? Because it certainly seems like a big part of what you've been doing over the last couple of quarters has been to develop more preprocessing capability, which I think includes sortation. I guess it'd just be helpful to understand the composition of the feedstock you've identified. Tamsin, why don't you comment on that? This is Tamsin Atefa, Chief Sustainability Officer. While our preprocessing has been somewhat focused on curbside collected because that does have great potential of growth, our LOIs and our ability to find new feeds has been mostly on post-consumer non-curbside. When you think about where polypropylene is used, and it's used in such a variety of places, it's used in grocery stores for the bakery, the floral department, the meat department, and even in the signage. When you think about going to an organization, say we can help you get to zero waste, if you were to collect all this material, then that adds up to quite a bit of material that wasn't recycled through traditional systems before. The Cleveland Browns in doing stadium serviceware doing things like super sacks across the industry consuming different materials like coffee beans at a Starbucks manufacturing roasting plant goes through a lot of polypropylene super sacks. Those aren't highly contaminated. They're actually quite often higher percentages of polypropylene. They're just people haven't really looked into recycling that material, and that's why when we go out and identify, we're claiming we found over 1 billion pounds out there that might not necessarily have been identified in the past. I hope that helps answer your question. It's things that have met its intended use, but not collected in curbside, if that makes sense. Yeah, that's very helpful. Thank you. Your next question will come from Eric Steen with Craig-Hallum. Your line is open. Good morning, everyone. Morning. Good morning. I was wondering if you could just give a little more clarity, in the release, you talk about the 277 million pounds, where you're in active discussions. Is it fair to say that those would all be related to Augusta? And then, you know, I know in the presentation you did give kind of the pipeline by, you know, by end use, but just curious if you could maybe talk about the pipeline by geography. However, when we look at how we're executing in Europe as well as in Asia, the right of first offers that our partners have, you know, were not taken into account in that 277 number. Okay. I don't know if it was just my phone that cut out, but I did not hear the beginning of your answer there. Just related to the 277. Understood. That 277 is really focused on the demand for Augusta. Got it. Okay. You know, maybe just on Europe, I know that, you know, a while back Europe was kinda top of mind, then it took a back seat a little bit to Augusta. Now it seems like it's kind of accelerated again. You mentioned the identification of five sites. Maybe just some color on how your, you know, current customers are involved in, you know, at least helping with that decision. Just maybe any thoughts on a timeline when you may come to some decision. Absolutely. In Europe, you know, part of the delay was really focused on better understanding what feedstock was available as we saw a dramatic spike in feedstock pricing as the price of virgin increased. We've also learned a tremendous more amount of information as we've progressed the Ironton design, which has allowed us to get more specific with our requirements for a European site. Most importantly was having the FDA No Objection Letter submitted, so that we can begin to prepare for engaging with EFSA. What we've realized from talking with a number of our customers is that initial execution in Europe would be sufficient with an FDA No Objection Letter in hand, which was new information for us, and really kind of created a clearer path to investing in a facility in Europe. We continue to progress site selection. That work has not slowed down. From my perspective, you know, we're quite excited at the discussions we're having on the feedstock side. Our team's been over to Europe a couple of times in the last 90 days, and are progressing both the commercial and feedstock discussions to be ready to progress site selection and begin the debt financing process. This is Mike Otworth, and just let me add this. You know, on the European side, there's a huge amount of demand, but you know, the overall equation with regard to feedstock and regulations and other elements is a bit more complicated. Even our partners in Europe, who are very excited about our building capacity there, opined that because availability of feedstock is so comparatively open in North America, that we should really make sure that we weren't slowing down our focus on building out our footprint in North America and doing a bit of a land grab on feedstock. We're doing that. But at the same time, we're seeing increased excitement from our European partners, the strategies coming together, both in terms of feedstock and a pricing model. I think we are operating with renewed enthusiasm for moving the ball forward in Europe simultaneously to all the progress we're making here in North America. Gotcha. No, that's helpful. Maybe last one for me, and I certainly can appreciate, you know, the inability to say much more about the subpoena, but given that that was on September thirtieth, I mean, is it fair to say that if there were something in there, you know, that elevated to a certain level that you would have had to disclose that, you know, knowing that in this case, you're disclosing it at your choice rather than being forced to? Yeah, thank you for that. I really hope you can appreciate that this is not something that we can comment on further at this time. We've really tried to make the disclosure that we feel is necessary, even though not required. We will keep people informed as we go along. This is really as far as we can go right now. Yep. Okay. Thank you. You know what we know. Yep. Thank you. Your next question will come from Hamza Mazari with Jefferies. Your line is open. Hi, this is Mario Cortellacci filling in for Hamza. Excuse me. I appreciate the time. I just wanna touch on one thing in the quarter and then maybe ask two questions that are just bigger picture. I guess just the first one is around the incremental cost. I guess what's your confidence level in terms of budgeting on the cost side going forward? Do you need to revise your expectations on OpEx and CapEx going forward for not only Ironton but the additional facilities? As we work through the detailed engineering for Augusta, we continue to evaluate the overall CapEx story for that site. At this point, you know, there are some cost increases that we have seen in base material pricing as well as a little bit of expansion of the scope as we discussed for the Ironton facility. Even with that built in, the scale efficiencies that we're going to get out of the Augusta cluster complex still substantially bring down the overall CapEx for that build quite substantially. With respect to OpEx, we track that, but you know, from a labor perspective and wage rates and things like that, I mean, we track that, we watch it, but it's not a significant portion of the overall P&L for each facility, and we don't see that as a needle mover for our operation at this point. Got it. Then just one of my follow-ups, again, big picture, I guess particularly with the technology, what could you say to help get us more comfortable with the technology and that it works? I guess this is just a question more for investors that are still newer to the story and getting used to it and kinda understanding your confidence level within it. I guess obviously your customers or the JV that you're working with have done their diligence, but I mean, what can you point to specifically, and is there anything incremental that gives you confidence in the tech and maybe gets us even more comfortable with the tech? Yeah, thanks. This is Mike Otworth. You know, I've been involved in and around early stage technologies, you know, my whole career, or at least my whole adult career. PureCycle is far and away the most due diligence technology I've ever been around. We're supremely confident in the robustness of the technologies. I think, you know, look to our investors and strategic partners and joint venture partners. They comprise some very sophisticated companies with very deep and broad technical capabilities. You know, they've done extensive due diligence on the technology. That extensive due diligence started at P&G before the technology was even licensed to us, and it's continued nonstop, you know, over the seven years or so since we licensed the technology. You know, these partners and companies comprise, you know, technical teams that have, you know, supremely good expertise in processes that involve temperature and pressure, polymers and chemicals. You know, in every instance, I think it's fair to say, in every instance where we've had, somebody come and do deep technical due diligence, sending teams of people to our facility in Ironton, you know, they've come back to us very quickly wanting to do something with us. We've heard comments like, "There are things we do today that are harder than this," and that, you know, what you have here really is a scaling challenge not really a core technical challenge. You know, I really lose no sleep over worrying about the technology. We have a very big scaling and execution challenge. There's no question about that. As far as the robustness and the realness of the technology, you know, some of you on this call were a part of our investor day that we had in Ironton. You saw it yourself. We love to host people to come and see it, because, you know, seeing is believing, and it's the real deal. It's going to transform plastic recycling and, you know, when you ask about my confidence, I have a supreme level of confidence in that. It's not among our bigger challenges. Got it. Just my last one. Again, big picture, maybe you could just take us back to where you were in this story, say, a year ago, and what you were saying and who you were as a company and the initiatives you laid out. Maybe just compare that to where you are today in the story and on those initiatives and then maybe some of the big achievements that you've had over the past 12 months? Yeah, you know, we have tried very hard in PureCycle from the very beginning to be careful about what we say we're going to do and be laser focused on delivering on what we've said we're going to do. I think we've been, you know, true to that mission, and I continue to preach it to our team. You know, the things that we've said we were going to achieve. You know, keep Ironton on schedule, identify additional locations to start to build more capacity to meet the demand, increase awareness of PureCycle in terms of the potential to have a beneficial and transformative effect on the industry. You know, we talked about the Cleveland Browns. I can tell you that there are many other organizations that we're talking to, some of which picked up the phone and called us on their own, you know, that will be, you know, high-profile announcements when they come to fruition. I think, you know, in addition to continuing to broaden the spectrum of customers on the side of feedstock, and, you know, we're ever broadening the spectrum on just general awareness across different verticals of, you know, how we can have creative, beneficial transformation. As I said in my earlier comments, enable companies to do something that will be recognized as real and impactful, and not, you know, anything near corporate greenwashing. You know, I think our progress on all of those fronts has been significant. You know, we'll continue to focus on what we said we're going to do going into next year. You know, we welcome the scrutiny of our doing what we say. I'll let Michael make a couple of additional comments here 'cause I can see that he's wanting to. Yeah. Thank you, Mike. Look, I think it's very important to look back a year and a half from when I first signed an NDA with the company back in January 5, 2020, and first heard about the company in December 2019. The transformation that this company has made over the last year and a half, and even over the last six to nine months, has been amazing. Really nothing short of amazing. The people, and I'm gonna start with the people. The experience that we have at this company that sits around a table every Tuesday for an hour and a half, where we talk about every aspect of our business. We have in-person meetings, we do virtual meetings, but the experience around the table, working out strategies, working out challenges, working out the idea that Augusta is the place to go, working out why we wanna do a 130 million pound plant rather than a 165 million pound plant, working out why we wanna do the feedstock plus pricing agreement going forward. We have decades and decades of experience sitting around this table, and all of that experience is extremely entrepreneurial. Now, Larry Somma is gonna come in to replace me as CFO. The fact that we can recruit somebody of Larry's caliber from a $30 billion producer of polypropylene is something everyone on this call should sit up and take notice of. The fact that we can recruit someone at that level of their career, in addition to recruiting people with the experience of Tamsin or Dustin Olsen, or I could go down and name 20 other people, is incredible. Why do they do that? These are the people that work in the industry. They know that what we're doing can be done, and it can happen, and it can get done. Is it easy? No. Do we work on it together? Yes. We modify our strategy based on market conditions. We are a learning organization. We have incredibly strong relationships with all of our partners. For Mike Otworth to have gotten a license from Procter & Gamble for this revolutionary technology back in 2015 is a testament to the quality of his relationships and his ability to build companies. The fact that P&G has great confidence in us, the fact that we've raised $750 million approximately over the last year and a quarter, is also a testament. Yes, we will have challenges, but I wanna make it just clear to everyone that the when you are inside the belly of the beast, and you're sitting there at the table with your colleagues every Tuesday for an hour and a half, and having conversations at midnight or 2:00 A.M. as your colleagues are overseas asking questions and looking for information, that ability and what we're building here gives me enormous confidence. I am very proud of where we are. Yes, we're gonna have challenges to overcome. Yes, there are things we have to deal with as a pre-revenue company. Make no mistake, when we come out and we do these quarterly updates, our number one goal is to demonstrate to you that we have laid out a plan, we have laid out a strategy, and we have milestones and goals that we are striving to reach, and we wanna give you updates on a regular basis, show a unique level of transparency, like the Leidos report that comes out every month. We want you to understand what we're doing and have the confidence that we're meeting our goals. The only way we can build our confidence and your confidence is by achieving those goals, and we focus on that, as Mike said, with a laser-like attention. Thank you. Thank you very much. Your next question will come from Hassan Ahmed with Alembic Global. Your line is open. Morning, guys. You know, a couple of questions. One on the EPC side of things, right? I mean, we obviously, in today's sort of market, keep hearing about all these sort of supply chain constraints, logistical constraints and the like. I just wanna get a better sense of how you guys have structured your contracts to basically sort of, you know, get some sort of assurances around the timeliness with the EPC guys of what they're delivering in terms of building out your facilities and also, you know, being on budget and the like, particularly as we're living through these sort of, you know, unprecedented sort of situations with COVID and labor shortages and supply chain logistical constraints and the like. Okay. We're very aggressively closing the EPC contract strategy for Augusta. I would say that's, you know, that activity has gone really well. We're really bridging off of our knowledge and experience from Ironton to help structure the contracts for the future. I think it's a little bit different though. We've learned so much with our experience with Ironton that we're able to, you know, manage the key supplier relationships in a way that gives us a bit of an advantage when it comes to cost and timeline for delivery of key long lead items. You know, from an EPC perspective on guarantees for timeline and for cost, I mean, it really comes down to the long lead key pieces of equipment that we have to get on order in order to build the facilities. Let me just say, you know, there is these days in the current environment, buying involves selling. Selling our company and selling our opportunity compared to other opportunities that these suppliers have in terms of who they can sell to. Dustin and his team have done an exceptional job of traveling around the world, of selling these companies on, "Hey, PureCycle is the future of plastic recycling. And even though we may be a smaller customer today than some of your other options, you know, we're going to be a very big customer in the future." He's been very successful on selling them on that, and that really has largely diminished kind of the risk to us of not getting key componentry that we need. I've been surprised that he's needed to do that, but I've also been, you know, surprised, pleasantly so, in the success that he and his team have been able to have. Understood. Yeah. Very helpful. As a follow-up, you know, on the again, I completely am cognizant of the sensitivities around the SEC subpoena and the like, but I'm frankly very confused about it, right? Because, look, if I read the verbiage properly, you know, they are questioning you about the technology and the financial projections, right? I mean, you know, my frustration basically is, you know, I'm a chemical engineer by training. I'm a master's in industrial engineering. Sure, you know, I mean, in chemical engineering school, you know, we would sit there and look at a technology, we'd set up a pilot plant, and we'd scale it up, right? I mean, that's the ethos of chemical engineering, right? Let's assume that these lovely lawyers from the SEC walk in and, probably with no chemical engineering expertise, what is it that they will discover about the technology between now and Q4 2022, right? Because at the end of the day, I mean, you guys should have your facility up and running by Q4 of 2022. If it's up and running, the technology works. You've scaled it up, right? If the technology works and you've scaled it up, your financial projections are correct as well because all you're doing is taking market prices of polypropylene. You have contracts in place for raw materials, right? I mean, just broad stroke, just try to help me understand what these guys are looking for. Well- Yeah. Let me be clear. I mean, do you see my frustration with this? I do see your frustration. We share it. Yes, and we share it. Look, we're not gonna discuss what the SEC is doing. I mean, there's a part of me that just wants to go back to my engineering school and return my degree. Wow. Look, we can't discuss the SEC in any more detail than we have. Let me just say a couple things. First of all, on this. We have always been aware of the roadkill that's out there from time to time on scaling risk. That's why we spent $30 million building a feedstock evaluation unit. By the way, that's a valid risk, right? I mean, scaling up in engineering is a valid risk. Yeah. Yes, it is. That's why the feedstock evaluation unit, which has now been running for 2.5 years, is so important because. That's one thing. The second thing is having people like Dustin Olsen and the breadth of his team on the manufacturing side coming from people who have been building polypropylene plants for their entire career. We have done and continue to do everything we can to mitigate and de-risk that process. This additional investment that Dustin talked about is a very important element. You know, we sit, and we have decisions that we have to make, that I have to make as CFO about investments. When we have an opportunity to make an investment which increases the probability that everything will come on stream as expected, we will make that. That investment that we're making in Ironton is good, it's important, and it's the right decision to do. We wanna be about execution. That's why I always stress the quality of the people that we have here. On execution, I'm gonna ask Dustin to just talk for a minute about Gulfspan Industrial and why our investment in Gulfspan Industrial is so important. Yeah, I mean, I would just say that everything that we do when it comes to the execution plan for this company is centered around finding efficiency, okay, and doing the things most efficiently. If we focus on that, then everything else will fall into place. Michael's point about the Gulfspan Industrial construction capacity is really twofold. One, we will be able to scale more quickly with the Gulfspan Industrial facility because we have the capacity to build three plants concurrently. When we get the design finalized and we start building the plants, we won't have a construction capacity risk. That's good. But that's important. But you can buy capacity in the market. What you can't buy is the institutional, let's say, experience build of the people doing that work. By concentrating our work at the Gulfspan Industrial facility, one, we protect our IP, but two, we train people on how to build facilities. The people at Gulfspan Industrial will be building our first facility for Ironton, and then they will be building the subsequent facilities after that. Look, that's one minor piece of the overall story of how we're going to scale efficiently, but I think it's a great example of how we're going to do it with the focus on efficiency. You can say the same thing about our born-digital strategy. I mean, born-digital strategy is 100% focused on how do we scale most efficiently. You know, how do we ensure that the learnings from one plant get applied to the second plant? How do we ensure that the training of an operator in Ironton gets translated to the training of an operator in Augusta? So when we learn what works, we keep. When we learn what doesn't work, we move on, and we continue to build that institutional knowledge day in and day out. You know, these two strategies in particular are really key foundational items, key pillars to us doing this efficiently. If we keep efficiency at the center of every decision that we make, you know, our view is that we can't lose. Very helpful, guys. Thank you so much. Your next question will come from Steve Byrne with Bank of America. Your line is open. Yes, I wanted to drill in a little bit about the technology that you've been looking at for preprocessing. I know you're looking at a variety of technologies. Are you seeing any technologies that are kinda rising to the top that you think will likely be the technology you employ in these pre-processing plants that are best able to sort the PP from the PE and so forth? Or would you characterize this as still fairly early in the review of these technologies and new entrants in the industry to develop these technologies? Do you anticipate you're having ownership of these technologies, or is this all gonna be licensed? Yeah, it's a good question. I'll let Dustin and maybe Tamsin may wanna add something as well. I would say on our team, we've seen everything probably that exists, and we have the resident knowledge of everything that's existed probably going back 30 years, to the present and how it's evolved, and kind of what's out there in terms of, kind of on the horizon. I'll let Dustin start with his perspective on your question. Yeah, I think it's really important to start with, let's say why there isn't or why some of the polypropylene doesn't get mined out of the waste today. The reason that hasn't happened at scale today is because there hasn't been a technology on the market that could transform a wide variety of plastic feedstock into an ultra-pure recycled polypropylene product. You know, PureCycle brings that. As a result of our technology now being available, there is a greater and greater opportunity to go find the polypropylene and bring it out of the waste and into our technology. Let me just help further distill this down to its basic elements. The problem is one of technology, but that problem with the technology creates a problem on the market side because you can't make high-value products that demand a premium price out of low-quality recycled polypropylene. What we're doing is we're enabling our customers to make products of the highest quality, hence they're willing to pay more for the recycled polypropylene, which means we can pay more for the feedstock, and it creates a whole new viable business ecosystem that didn't exist in the past. If you ask, you know, somebody, like one of our, you know, partners on the processing side is a company called Rumpke. If you ask them, "Well, why aren't you pulling the polypropylene out of your Cincinnati operation?" They'll say, "Well, because we haven't had consistent demand from a customer like what you're, you know, asking us you're willing to do. That's never existed in the past." We are creating a transformation in the supply chain, and you know, at its core, it's being driven by you know, our rather revolutionary technology. I would say that as we now bring that technology to market and we look to how we collect and aggregate this type of molecule, much of what we're doing is really just deploying traditional technologies in the feed preprocessing area, okay? In many cases, it's not brand-new tech that we need to prove out in order to make this work. This is established tech with very low risk of operation. We just need to get it out there to go find the polypropylene. The second point is something we mentioned in the script, which was. You know, depending on the feedstock available for recycling or the feedstock available for us to purchase, it may require a unique type of processing in order for it to be prepared for the purification facility. A good example of that are nets and ropes, fishing nets and ropes used to tie off cruise ships and things like that. Like, that is a very unique product. In order to pre-process that to get it ready for purification, it takes a unique processing step to do it. In each region where we set up these satellite prep facilities, we will evaluate what is around us and what we will need to put in place in order to process the feed that's available. The last thing I'll mention is just with respect to, let's say, emerging technologies in the advanced sortation space. There are some that we are evaluating, you know, robotics and AI and things like that are definitely hitting the market, and they have real nice potential and promise. We actually have some advanced recycling technology that we have discussed and shown everybody and actually built at our Ironton facility to test out, and we're seeing good success with that. I think the important thing is that we will continue to survey the market for what technologies are available for us to deploy to process the polypropylene in preparation for the purification. We will advance certain in-house technologies like the one that we built at P4, and we will leverage the experience and the offerings from those in the market to help us as well. I hope that answers your question. I was just gonna agree that the last point Dustin made, I felt like has moved us the most, that we have put in equipment already that kind of puts us ahead in sorting, I would say, post-consumer curbside material in comparison to what's out there today. You know, I feel confident about being able to add on to that as we build, as these new equipments become available in a more robust way. I think AI is still a little bit behind the scene, but it's getting there. Next question. Your next question will come from Thomas Boyes with Cowen and Co. Your line is open. Great. Thanks for taking my questions. You know, obviously most have been asked already, but there's a couple things I just wanted to drill down on. In particular, I just noticed that the European facility is, I think, now listed as 107 million pounds of capacity, and I believe it was 130 before. I was wondering if you could just address the capacity shift there. You know, is that a function of what you think you can secure as far as feedstock's concerned? Is it demand? Is it just picking the Ironton design over a cluster facility, or is there a specific site constraint? To be honest with you, the decision between 107-130 is still, let's say, yet to be made. We have the capability to deploy both technologies, and ultimately it's gonna come down to a decision between, you know, available feedstock that we can process as well as speed. If we get enough feedstock contracted to support a 130 million pound plant, then we'll do it. If we can get started with a 107 million pound plant, then we may make that decision. I will remind you that when we made the decision to go from 107 to 130, we actually use quite a lot of the same design from the 107 and just alter it a little bit to push it to 130. It's feasible to say that we could make some small modifications later in the process in order to make the decision between 107 and 130. Got it. No, that makes sense. Then maybe just sticking on the European market really quickly, you know, given the letter of no objection that you have with the FDA, do you dual track that when you submit to the European Food Safety Authority, or do you kind of wait for that official sign-off and then, you know, submit everything at once, given you already have all kind of the technical data that you submitted under the FDA's letter? Yeah. I think from our standpoint, you know, we're preparing to engage with EFSA, but we believe we'll have the best path forward with a FDA letter of no objection in hand. Right now we're working through a lot of preparation activities to begin the engagement but have not begun the formal engagement. I think that much of the information required to submit for the FDA is similar to the information that will be required for EFSA, and so the work done once does not need to be redone. That's why we think that there's benefits leveraging the FDA for EFSA. Great point. Great. No, I appreciate the color there. Then the other thing is just to be a bit more granular on the two-thirds of the cap increase that's not associated kind of with that inflationary cost on construction, you know. I would imagine that the majority of that's related to the feedstock, you know, contaminant processing and not safety, but maybe I'm wrong. It's not like adding more handrails to the facility. Are they linked some way that I'm not appreciating? No. Yeah. No. No. They're really two distinct paths, and I would maybe point out one key differentiation. When we talk about process safety, that has a lot to do with the reliability of the plant, the insurance that the operation of the plant will be safe and reliable on an ongoing basis. It has less to do with the occupational safety risk, like handrails and things like that. The cost profile for that activity really hasn't changed too much with respect to the two-thirds versus one-third. I mean, for sure, the two-thirds is let's say mostly the expansion of feed processing activities and then topped off with the process safety. The one-third has to do with material escalation across the overall plant. I mean, look, we've had some suppliers that have come to us and said, "Hey, look, we can't deliver the equipment at the price we originally quoted you, and we won't because the material price is higher than the final product price." You know, we have to make a decision there whether to try to find someone else that can do it or recognize that this is a market and adjust our pricing for that equipment to keep the timeline. Makes sense. Then this is maybe the final one. Since you had highlighted Q1 2022 as a key financing window, and, you know, with the five lines in Augusta, you said it's supported by about 3 debt draws. Is there a specific amount of capital that you kind of need to secure in that timeframe against those long lead time items or is this really still, you know, TBD based on some of the engineering work that still has to happen in that location? Yeah. I would say that, you know, with respect to when the capital needs to be deployed, we really didn't speak in too much detail around the key supplier relationship here. The reality is that when you look at the curve for spending across the plant, and then you dissect that down to a curve for spending across each piece of equipment, you recognize that, you know, not a lot of capital needs to be deployed immediately. Most of the work that gets done at this stage in the game is detailed engineering, and so we can progress the timeline before we have the final financing because it's a relatively low amount of capital required to do so. That's how I would answer it. I mean, for sure, we need to secure financing in the Q1 window, but by not having the financing today does not mean that we are slowing down on the Augusta build at all. Great. Now I appreciate the call. That was it for me. Again, if you would like to ask a question, you may press star one on your telephone keypad. Your next question will come from Barry Haimes with Sage Asset Management. Thanks so much. I have a question back on the scaling up question, if you will. So as you're going through the build process in Ironton, are, you know, how many sort of different key processes are there, and will you be able to validate some of those, you know, as you go? Or is it more a situation where you get to the end, you turn the key, and see if it works? Just would love any kind of feel for, you know, how you guys think about validating the different processes and, you know, how much before that final end date, some of that, you know, you might be able to do some of that. Thanks. I think the first separation on the processing is between the prep, what we call the prep, and what we call the purification. The prep activities we mentioned in Ironton will or should begin operation in Q2 of next year. That will be the first proof point on the equipment that we purchased for preparing the feed for the purification. We'll know pretty early in the course of 2022 how well the preprocessing area is working. That's really good because that takes that level of, let's say, skill build, learn, and, let's say operational risk off the table by the time the purification plant is ready to go. When the purification plant finishes construction, and we do all the necessary, let's say, mechanical commissioning tests, like, you know, making sure valves operate the right direction, make sure things are wired up properly, make sure we pass pressure tests and things like that, then there will be a series of process commissioning steps that start, and part of that will be, you know, processing virgin polypropylene to ensure the flow works properly through the plant. Then we will, over the course of the process commissioning step, add different levels of, let's say, fully recycle, let's say, normal feedstock to the process to test the rest of the operation. There's, I'd say that's the best way to answer that question. Great. Thanks. Appreciate the call. Excuse me, speakers. I'm seeing no further questions at this time. You may continue. Okay. If we have no further questions, we'll adjourn this call. Thanks to everybody for joining us today, and we continue to appreciate your interest. This concludes today's conference call. Thank you for participating. You may now disconnect.