Good afternoon, and welcome to Peraso Inc.'s third quarter 2023 conference call. At this time, all participants are on a listen-only mode. If anyone needs assistance at any time during the conference call, please press the star key followed by the zero on your touch-tone phone. As a reminder, this conference call is being recorded today, Monday, November 13, 2023. I would now like to turn the call over to the host for today's program, Mr. Jim Sullivan. Please go ahead. Thank you, operator. Good afternoon, and thank you all for joining today's conference call to discuss Peraso's third quarter 2023 financial results. I'm Jim Sullivan, CFO of Peraso, and joining me today is Ron Glibbery, our CEO. Today, after the market closed, we issued a press release and related Form 8-K, which was filed with the SEC. The press release and Form 8-K are available on Peraso's website at www.perasoinc.com, under the Investor Relations section. There is also a slide presentation that we will be using in conjunction with today's call that through the webcast link on the IR website. As a reminder, comments made during today's conference call may include forward-looking statements. All statements other than the statements of historical fact could be deemed as forward-looking. Peraso advises caution in reliance on forward-looking statements. These statements include, without limitation, any projections of revenue, margins, expenses, non-GAAP gross profit, non-GAAP gross margin, non-GAAP operating expenses, adjusted EBITDA, non-GAAP loss, cash flows, or other financial items, including anticipated cost savings. Also, any statements concerning the expected development, performance, and market share or competitive performance of our products and technologies. All forward-looking statements are based on information available to Peraso on the date hereof. These statements involve known and unknown risks, uncertainties, and other factors that may cause Peraso's actual results to differ materially from those implied by the forward-looking statements, including unexpected changes in the company's business. More detailed information about these risk factors and additional risk factors are set forth in Peraso's, Peraso's public filings with the SEC. Peraso expressly disclaims any obligation to alter its forward-looking statements, whether as a result of new information, future events, or otherwise, except as required by applicable law. Additionally, the company's press release and management statements during this conference call will include discussions of certain measures and financial information in terms of GAAP and non-GAAP. With respect to remarks on today's call involving non-GAAP numbers, unless otherwise indicated, referenced amounts exclude stock-based compensation expense, amortization of reported intangible assets, and the change in fair value of warrant liability. These non-GAAP financial measures, definitions, and the reconciliation of the differences between them and comparable GAAP measures are presented in our press release and related Form 8-K, which was filed today with the SEC, which provides additional details. For those of you who are unable to listen to the entire call at this time, the recording will be available on the Investor Relations section of our website. Now, I would like to turn the call over to our CEO, Ron Glibbery, for his prepared remarks. Ron? Thank you, Jim. Good afternoon and welcome. We appreciate you joining us on today's call. I'm pleased to report that our third quarter financial results marked a significant improvement over the prior quarter, with total revenue increasing 87% sequentially and 36% year-over-year. Although our mmWave business continued to reflect lower customer demand due to the ongoing industry inventory correction, during the quarter, we commercially commenced initial shipments against a large order backlog associated with the end-of-life for our memory IC products. This increased revenue contribution from our higher-margin memory IC products, combined with a sequential increase in sales of our mmWave products, drove solid gross profit expansion as well as improvement in our bottom-line results. Looking at slide four, I want to begin with an update on the end-of-life of our memory IC products, giving a significant positive contribution to our third quarter results. As a reminder, in May of this year, we notified our memory customers of the end of life after learning that our foundry partner would be discontinuing the manufacturing process used to fabricate wafers for these products. The response from customers thus far has been very strong. To date, we've received purchase orders for last-time buyers from multiple customers totaling $11.3 million. We commenced initial shipments in the third quarter, resulting in revenue of $3.1 million, with the majority of these initial order shipments being fulfilled from existing inventory. Our remaining backlog of these end-of-life orders was approximately $8.2 million at quarter end, and we also have an additional $2.5 million of backlog associated with production orders. Based on current manufacturing schedules at our foundry partner, we expect to complete shipments in fulfillment of all outstanding backlog by H2 of 2024. The deadline for customers to place final purchase orders for end-of-life products is late December of this year, and we continue to expect total EOL orders to amount between $15 million to $20 million. Importantly, these collective end-of-life orders and shipments are anticipated to contribute meaningful revenue and cash flow over the next several quarters as we continue to focus on expanding the customer base for our mmWave products. Turning to slide five and an update on our mmWave business. With demand from our largest existing customers continuing to be impacted by the ongoing industry inventory correction, a large portion of our team's energy and efforts have been centered around our engagement pipeline. Since August, we have increased the combined number of engagements from 80 to 87, primarily reflecting the series of additional new funnel opportunities. The number of active engagements as of October remained about the same. However, I want to highlight this is in part reflective of our recent decision to place a small number of previous engagements on hold and therefore we exclude them from these metrics. As we continue to source and evaluate new potential opportunities, we are putting an even greater emphasis on prioritizing the highest quality engagements in terms of both projected economic value and anticipated time to market. We are also diligently allocating our design and engineering resources, coupled with enhancing workflow efficiencies in support of maximizing our expected near-term return on investment. As stated in the past, we view our overall pipeline as a leading indicator of progress toward a more diversified customer base, and I continue to be encouraged by our expanding number of high-quality, active engagements. Within our mmWave business, I'd like to highlight one of the new markets we are seeing activity in, which is aerospace and defense. mmWave provides some distinct advantages over traditional wireless technologies. mmWave delivers the standard benefits, including high data rates and low latency. However, as compared to traditional radio signals that radiate in all directions, Peraso is able to create very narrow, focused beams that are more difficult to detect. mmWave provides an inherently stealthy protocol, low probability of interception, low probability of detection, and anti-jamming, all of which are quite desirable for military communications. To these ends, we recently secured our first commercial engagement for the use of our mmWave technology for mmWave communications or for military communications. We are in a customer-funded proof of concept stage now, and we'd like to be shipping in volume in the H2 of 2024. In the meantime, we've engaged on other defense-oriented opportunities, and we hope to be speaking to those on future conference calls. Moving to slide seven, there continues to be strong evidence for accelerating market adoption of 60 GHz fixed wireless access. In the past two months, members of Peraso's team have participated in three wireless industry trade shows, all of which feature recognition of the growing momentum around 60 GHz and mmWave solutions for fixed wireless access applications. In September, we had multiple business development and product executives attend Mobile World Congress in Las Vegas, where they showcased Peraso's latest mmWave solutions for fixed wireless access and customer premise equipment. Also in September, Peraso's Senior Director of Product Marketing, Dr. Nadine Hatto, was invited to participate on a Q&A panel at Wi-Fi World Congress in North America. In addition to being joined on the panel by representatives from Airvine and Cambium Networks, Dr. Hatto's participation served as a great opportunity to elevate awareness of the multi-gigabit performance of Peraso's mmWave solutions for 60 GHz fixed wireless access applications. More recently, our team hosted meetings with current and prospective customers and partners at WISPAPALOOZA show in Las Vegas. Peraso also participated in a vendor spotlight session, which provided a unique opportunity to highlight the growing number of 60 GHz unlicensed wireless deployments utilizing our solutions to enable multi-gigabit connectivity. Separately, also notable at WISPAPALOOZA was Ubiquiti's significant presence, given they are the leading fixed wireless access equipment vendor to the WISP market. In fact, Ubiquiti showcased seven different 60 GHz products at its booth, including its newest Wave Pro point-to-point 60 GHz radio that enables speeds up to 3.2 Gbps. This increase in commercial availability of products that support multi-gigabit connectivity makes 60 GHz a reliable and lower-cost competitive alternative to fiber. Turning to slide eight, I want to briefly discuss another new emerging market opportunity that we're seeing and how mmWave solves the challenges faced by other technologies in dense urban environments. Take, for example, the densely concentrated centers found in emerging markets such as India, Southeast Asia, and parts of Africa. There is rapidly growing demand for internet connectivity in these areas. However, the population density presents a unique set of technology challenges. First, the costs associated with deploying and then also physically securing infrastructure make fiber uneconomical and unrealistic in many of these markets. Additionally, the sheer number and density of connections contribute to significant wireless congestion interference, exceeding the capable tolerances that are suitable for Wi-Fi. Lastly, these emerging geographies frequently have less reliable electricity service, making it important for deployed equipment to sustain operation on low- power sources such as solar and battery power. Inherently, mmWave provides a solution to each of these challenges. Its beamforming capability minimizes and overcomes the density of wireless connection points, enabling more reliable and high bandwidth service. mmWave solutions can also be implemented with much lower upfront costs, making deployments more economical for service providers. Additionally, the higher power efficiency of mmWave solutions enables longer operation on temporary power sources, resulting in reduced service interruptions. During the third quarter, we formally introduced the Peraso PRM2144X as the latest addition to our Perspectus series of mmWave modules. Utilizing our X720 60 GHz chipset, the new PRM2144X incorporates a 128-element phased array antenna that provides high gain and narrow bandwidth, making it an ideal solution for delivering reliable connectivity in dense urban environments. Looking at slide nine, I wanted to share this updated overview of the WISPs that are currently utilizing Peraso-enabled hardware today as part of the 60 gigahertz deployments. To date, we've identified over 25 WISPs spanning 14 states in the U.S. and at least four WISPs in Canada. Additionally, we've recently confirmed more than one planned 60 gigahertz deployment utilizing our technology outside of North America. We view this growing list of WISP deployments as further validation of both the growing market traction for 60 gigahertz technology, as well as Peraso's leading position in 60 gigahertz mmWave solutions for fixed wireless access. As demonstrated on the right side of the slide, the overall trend and outlook continue to be favorable for fixed wireless access market. In addition to third-party research forecasting the sustained growth of WISP subscribers over the next several years, the U.S. Federal Communications Commission, or FCC, recently published a notice of inquiry advocating for an increase to the standard minimum benchmark for fixed broadband. As a first step, the FCC has proposed an increase from an existing 25/3 Mbps benchmark to 120 Mbps. Moreover, they are also soliciting comment on a potential longer-term goal of 1 Gbps, 500 Mbps in the future. We believe this and other growing support for gigabit connectivity will serve as strong drivers for expanded adoption of mmWave fixed wireless access. As a reminder, Peraso's existing mmWave solutions already fully support and enable multi-gigabit connectivity. In closing, we continue to believe there's a substantial market opportunity for Peraso's mmWave technology, spanning both unlicensed 60 GHz and licensed 5G fixed wireless access. Although we expect the recent headwinds and inventory correction in this area of our business to extend into 2024, we remain encouraged by the continued expansion of our sales engagement pipeline. We are committed to advancing these engagements for our mmWave solutions in support of building a more diversified customer base and achieving sustained future revenue growth. With that, I'll turn the call back to Jim to review third quarter financials and speak to the outlook. Thank you, Ron. Turning to the results. Total revenue in the third quarter increased to $4.5 million, a significant increase from the $2.4 million in the prior quarter, and $3.3 million during the same quarter a year ago. Product revenue from the sale of our memory integrated circuits and mmWave integrated antenna solutions in the third quarter was $4.3 million, compared with $2.2 million in the prior quarter and $3.1 million in the third quarter of 2022. The sequential and year-over-year increase in third quarter product revenue was driven by increased shipments of memory IC products, primarily reflecting the initial fulfillment of purchase orders for last-time buys. Royalty and other revenue for the third quarter of 2023 comprised $0.2 million of royalties from licensees of our memory technology and other revenues from performance of non-recurring engineering services for mmWave customers. GAAP gross margin increased to 45.4% in the third quarter, compared with 25.3% in the prior quarter and 39.3% in the year ago quarter. On a non-GAAP basis, excluding amortization of acquired intangible assets, gross margin for the third quarter was 58%, compared with 45.9% in the prior quarter and 50.2% in the third quarter of 2022. The higher gross margin for the third quarter was attributable to revenue mix, reflecting increased revenue contribution from memory IC products. GAAP operating expenses for the third quarter were $5.6 million, consistent with the $5.6 million in the prior quarter and compared with $5.3 million in the third quarter of 2022, which reflected a $2.6 million gain from a license and asset sale transaction. Total operating expenses for the third quarter of 2023 on a non-GAAP basis, which excludes stock-based compensation and amortization of reported intangible assets, were $4 million, compared with $4.1 million in the prior quarter and $3.7 million in the same quarter a year ago, which reflected a $2.6 million gain from a license and asset sale transaction. The decreases in operating expenses reflect the incremental benefits from the cost reduction initiatives and other previous actions we began implementing during the H2 of 2022 to streamline operations, including the license and asset sale transaction for certain memory technology closed in the third quarter of 2022. In addition to these previous initiatives, earlier this week, we took further action to reduce operating expenses and implemented an employee layoff and terminated certain consulting positions to further reduce the company's operating expense and cash burn, as the company continues to prioritize business activities and projects that it believes will have a higher return on investment. The reductions impacted 19 full-time equivalent positions, or approximately 28% of the company's workforce. As part of the reductions, the company implemented a temporary layoff that impacted its Canadian subsidiary, and the company will determine in 2024 whether the company's financial and business conditions will permit the recall of the impacted employees. The initial cost reduction benefits in these most recent actions will be realized beginning in the fourth quarter, with total annualized savings of up to approximately $2.2 million if the company does not recall the impacted employees. GAAP net loss for the third quarter of 2023 was $0.6 million, or a loss of $0.02 per share, compared with a net loss of $4.1 million, or $0.17 per share in the prior quarter, and a net loss of $4 million, or $0.20 per share in the same quarter a year ago. On a non-GAAP basis, net loss for the third quarter of 2023 was $1.1 million, or a loss of $0.04 per share, which excluded stock-based compensation, amortization of acquired intangibles, and change in fair value of warrant liability. This compared with a non-GAAP net loss of $3 million, or $0.12 per share in the prior quarter, and a net loss of $2 million, or a loss per share of $0.10 in the same quarter a year ago. The weighted average number of basic and diluted shares outstanding for purposes of calculating both GAAP and non-GAAP EPS for the third quarter of 2023 was approximately 28.6 million shares, which excludes 1.8 million shares of our common stock and exchangeable shares, shares that are currently escrowed. Adjusted EBITDA, which we've defined as GAAP net income or loss as reported, excluding stock-based compensation, amortization of acquired intangibles, change in fair value of warrant liability, interest expense, depreciation, amortization, and the provision for income taxes, was negative $0.9 million in the third quarter, compared with negative $2.8 million in the prior quarter and negative $1.8 million in the prior year period. From a balance sheet perspective, as of September 30, 2023, the company had cash and cash equivalents of approximately $0.7 million. Subsequent to September 30, 2023, we collected approximately $3.7 million of memory end-of-life proceeds, including $2.2 million included in accounts receivable at September 30, $0.4 million related to October shipments, and approximately $1.1 million of customer deposits to fund inventory purchases. As discussed in my earlier remarks, we recently implemented steps to meaningfully reduce the company's near-term operating expenses and cash burn. However, due to our expectation for continued operating losses and cash burn, the company will need to raise additional capital through equity or debt arrangements, as described in our quarterly report on Form 10-Q for the quarterly period ended September 30, 2023. With respect to our business outlook, our near-term visibility continues to be impacted by multiple factors that make it difficult to confidently forecast the full range of potential outcomes specific to the fourth quarter. These factors primarily include the general uncertainty associated with the broader macro environment and end market demand, as well as the yet to be determined duration of the ongoing inventory correction. As such, today, we are not in a position to provide specific guidance for the current quarter. To the extent that one or more of these factors become more certain, we will consider providing future potential updates relating to our near-term expectations. This concludes our prepared remarks, and I'll now turn the call back over to the operator to assist us with the Q&A session. Operator? Thank you. At this time, we will be conducting a question-and-answer session. If you would like to ask a question, please press star one on your telephone keypad. A confirmation tone will indicate your line is in the question queue. You may press Star two if you'd like to remove your question from the queue. For participants using speaker equipment, it may be necessary to pick up your handset before pressing the star keys. One moment please, while we poll for questions. Once again, that's Star one if you have a question or a comment. The first question comes from Kevin Liu with K. Liu & Company. Please proceed. Hi, good afternoon, guys, and congrats on the improved results this quarter. First question I had was just on the memory IC end of life. In terms of the backlog that you see currently and the purchase orders you anticipate, do you expect the shipments against those to be fairly consistent as you make your way through the end of this year and next year? Or are there going to be periods where, you know, those shipments are more heavily concentrated? Yeah, I would say at the current, you know, on September 30, we had $8 million of backlog, just over $8 million of backlog still sitting there. We expect that to ship through the third quarter of 2024. Obviously, we are projecting additional orders, you know, to be received there in late December, ideally prior to the holidays. Right now, we currently see that shipping into, you know, kind of the H1 of 2025. You know, it's really going to pick up. I would say there's definitely an increase in the, you know, starting in the second quarter of 2024. Part of it was obviously for the first quarter of 2024, we were awaiting orders, so we didn't build the inventory. We basically shipped everything we could in this third quarter, and we're in the process of building additional product, but we really don't ramp until the second quarter of 2024, and that continues, you know, kind of second and right now, second and third quarters of 2024 are probably the heaviest, and then it starts to, you know, reduce, but not on an extreme slope. Understood. That's helpful. And just on the inventory position, you know, how much of the build sequentially was just tied to the memory business versus mmWave? And then more generally, as you look forward and you start to build up the additional orders, should we expect that inventory to continue to build through kind of the middle of next year? Or do you think you're at a fairly healthy level now where you can, you know, kind of ship based on the orders coming in? You know, right now, we, you know, the majority of the inventory as of September 30th, was on our mmWave products. We did have an increase during the quarter ended September 30th, as we had commitments for wafers, which were shipped to us by our foundry, until we were able to cancel some of those orders, or at least delay them, you know, starting in the third quarter. So the inventory increase was primarily there. On the memory side, we've, you know, basically shipped what we could, and it was obviously work in process or for our Bandwidth Engine 3 product, where we are awaiting orders we expect to come from two customers there. We've had that inventory and frankly, don't need to build any more unless the orders really exceed our expectations. I think we'll see some increases in memory inventory in the fourth quarter as we're, you know, going to place some regular wafer orders. ... and in some cases, maybe some substrates too. And, you know, hopefully, that will be offset by reductions in mmWave, as we see our mmWave customers beginning to get on, you know, back on track, particularly in early 2024. Got it. And just turning to mmWave for a second. You guys talked about some interesting kind of new markets for you, aerospace and defense, as well as the dense urban environment. Maybe give us a sense for, you know, how significant the initial customers you're talking to could be in terms of revenue next year. And then in general, you know, how you're thinking about the overall market sizing relative to kind of the fixed wireless access market. Sure, Kevin, thanks for the question. Like, on the dense urban environment, you know, a new... It's actually the customer forecasts equal anything we've seen, you know, so far in terms of the volume. So but, you know, the proof is in the pudding, obviously. But, you know, the nice thing about the market is the TAM, like, the opportunity is significant, right? I mean, there's like 1 billion people that live in, you know, dense urban environments around the world. You know, it's kind of interesting because over the last, you know, few months, we've realized, I mean, mmWave, the challenge and maybe, you know, we went through it quickly on the call, but, you know, the real advantage we bring here is there's a couple of really important advantages. Just the ability to service dense environments, I mean, very, very dense environments, and we're talking, you know, customers who are 10, you know, 15, 15 feet apart. But the other one that's actually quite interesting is our ability to transmit, and, you know, again, this is in our deck, but I mean, to transmit at full rates under 10 watts. So, basically, you know, many of these places have run on battery, like, run on battery power with very poor electricity infrastructure, so they run off battery power. So it was vital that we, you know, were able to run off that batteries for probably half the time. So our ability to run at full performance with reduced battery, with reduced power consumption was critical. So we actually, I think for 2024, it's gonna be a ramp year, but we should see it, you know, we're hoping, you know, later this year into early Q1. But obviously, we'd like to explore, you know, you know, other opportunities globally for this market. So it's something that we do really well. We were exposed to this opportunity over the last few months, and it's something we're going to expand on. That's great to hear. I think you had a second part to your question, right? Oh, sorry. No, the second part of it was just also on the A&D side of the equation and just kind of the opportunity there. Yeah, that's more exploratory, let's say, like I said. So it's a proof of concept. Like, I think that, again, on the military side of things, I mean, where the value proposition is, you know, one of the keys there is the stealth ability of mmW ave on the battlefield. We're still exploring that in terms of what the volumes look like. Dense urban is really more of an opportunity, like a shorter-term, higher-volume opportunity that we can get our arms around right now. Sounds good. Well, good luck against those initiatives, and I'll turn it over. Thanks. Thanks. Thanks, Kevin. Thanks, Kevin. The next question comes from David Williams with Benchmark. David, please proceed. Hey, good afternoon, gentlemen, and, thanks for the... Let me ask a question here. Just kind of wanted to touch on the funnel that you have in your presentation. Yeah. Can you just kind of walk through that and help us understand? I mean, you, you're getting some really nice growth here in terms of the funnel and, and things are moving through. Just, hoping for maybe a little more color on how you're seeing the funnel, how things are developing, if there's anything that's moving there, that's, either in line or maybe out of line with what your expectations are. Thanks. Well, for sure, Dave, you know, the way the markets are shaping up is, and again, I think the theme generally is congestion of Wi-Fi, right? And so basically, you know, obviously, the market we've talked about for several quarters is let's call it North American fixed wireless access, right? And that's more suburban, rural, and that's the WISP that we've been talking about. And so that's, you know, that's, that constitutes a certain segment of the pipeline. We are starting to see some consumer drives. And the, you know, the value, again, kind of the same value proposition is that, you know, high data rates, but again, in a congested environment. And I think, you know, we obviously realize now that mmW ave does a great job in a congested environment. And so we're seeing some actually quite nice volume opportunities in consumer electronics. So that's constituting a certain portion of our pipeline. You know, other opportunities are in transportation. We're seeing some opportunities in transportation, mostly in Asia, I would say specifically. So that's you know part of that pipeline. And then, of course, the aerospace and military. So I would say those are kind of the main drivers for the pipeline right now, if you will. We've also got, I mean, this is public information. We also have a very good relationship with Richardson RFPD, and you know that relationship is really paying off and really uncovering some terrific opportunities for us. So that helps with our pipeline, as well, both in North America as well as around the world. So that's been a great relationship as well for our sales, for our sales pipeline. ... Okay, Okay, fantastic. Thanks. And then if you think about your mmW ave inventory that's either in-house or maybe sitting at your customers, what is it gonna take, do you think, to get through this? How much is sitting out there? And you said you think maybe the first part of the year, is there anything that gives you hope, maybe that we could see something kinda kick in at the end of this year? And I guess just trying to understand the inventory impact and how long it's gonna take to really digest that. You know, we were at Las Vegas WISPAPALOOZA three weeks ago, and I think that. So the good news is that, you know, guys like Ubiquiti, who are the market leaders in fixed wireless, you know, had seven or eight products on display. And so that was. And, you know, I mean, the feedback we did get from WISPs was that, you know, those products, those 60 GHz products are, they call them bulletproof, right? I mean, they worked really, really well, and probably exceeded expectations. You know, the problem is, there's more of an education process going on in that market. And so Ubiquiti's done a fantastic job of starting to promote it. You know, in fact, we've done some, you know, kind of videos with their distributors now. So I would say really more into Q1, Q2 is when we're gonna start to see the new orders come online, right? Because, you know, they just, it's taken a little longer for them to reach their volumes than they were hoping. And then, obviously, with the whole inventory correction, where people were already ahead of the curve, you know, we've got to bleed through that. So I'd say, you know, hard to imagine over the next eight weeks, we're gonna see a lot of orders, but we'll, you know, hopefully in the later Q1 or the Q2, we'll start to see that shift. Okay. Does that make sense to you? It does. Very helpful. Thank you. And then maybe, Jim, just thinking about the balance sheet. Obviously, you're a little low on cash there, but you've got some nice, you know, build up in the inventory and the working capital, so it'll be good to see that get freed up. But I guess in the near term, what do you think are the... I guess, how are you feeling about your liquidity here? And are there any puts and takes, things that we should be thinking about as we kind of parse through it? Yeah, sure. No, I mean, it's you know, an important question here. Yeah, cash was low at the end of the quarter. But fortunately, you know, as I highlighted in my script, you know, about $3.7 million came in from the EOL alone, you know, between you know, the end of the quarter and I think up through last week. So that's definitely given us you know, a lot more breathing room and, and visibility, and particularly the you know, the prepayment to fund you know, wafer purchases, which we have been making, which I you know, think speaks to our confidence in our business. We didn't you know, we had held off on some back in the summer, but I turned the you know, turned the faucet back on there. You know, right now it's a function of building inventory to ship to the memory orders, both—you know, we kind of look at them internally as the EOL—and then there's still regular production running, as well. So like I said, we shipped, you know, what we could in the third quarter to fulfill orders. Our customers have been, you know, very supportive of taking inventory and, in addition, accelerating payment terms to generally pay within 10-14 days, which is, you know, huge to improve our working capital. You know, we are expecting to bring the burn down there and, you know, obviously talked about some of the, you know, painful cost reduction actions we took specifically last week, which was, you know, difficult. But, you know, unfortunately, we had to reduce OpEx and burn, but, you know, we remain optimistic about prospects and are still chasing, you know, I think a quarter or two had talked about, opportunities for funded development, et cetera. You know, the current macroeconomic environment, uncertainties have really slowed those down, but we are still looking to, you know, chase one of those down and, you know, have a need to, you know, business need to bring folks back to, to support those. But, you know, looking out here, you know, I think I will say in our, you know, 10-Q, we're, you know, funded into the first quarter. We're obviously taking actions to, to address that. But EOL, you know, having the visibility of those orders here in the next, you know, kinda, you know, 6-10 weeks or 6-8 weeks will be critical as we assess it. You know, we are always alert to financing opportunities as well, you know, as any company in our, you know, position should be. Okay, great. Thanks so much, gentlemen. I certainly appreciate the time. Thank you, Dave. Okay, we have reached the end of the question and answer session. There are no further questions in queue. This concludes today's conference, and you may disconnect your lines at this time. Thank you for your participation.