Hello. Welcome to the TPI Composites 1Q 2023 Earnings Conference Call. All participants will be in a listen-only mode. Should you need any assistance, please signal a conference specialist by pressing the star key followed by zero. After today's presentation, there'll be an opportunity to ask questions. To ask a question, you may press star then one on your telephone keypad. To withdraw your question, please press star then two. Please note, this event is being recorded. I would now like to hand the conference over to your first speaker today, Mr. Christian Edin, Investor Relations. Please go ahead. Thank you, operator. I would like to welcome everyone to TPI Composites first quarter 2023 earnings call. We will be making forward-looking statements during this call that are subject to risks and uncertainties, which could cause actual results to differ materially. A detailed discussion of applicable risks is included in our latest reports and filings with the Securities and Exchange Commission, which can be found on our website, tpicomposites.com. Today's presentation will include references to Non-GAAP financial measures. You should refer to the information contained in the slides accompanying today's presentation for definitional information and reconciliations of historical Non-GAAP measures to the comparable GAAP financial measures. With that, let me turn the call over to Bill Siwek, TPI Composites President and CEO. Thanks, Christian. Good afternoon, everyone. Thank you for joining our call. In addition to Christian, I'm here with Ryan Miller, our CFO. Today, I'll discuss our results and highlights from the first quarter, our global operations, including our service and automotive businesses, then cover our supply chain and the wind energy market more broadly. Ryan will then review our financial results. Then we'll open the call for Q&A. Please turn to slide five. Despite a challenging global wind market and economic climate, during the first quarter, total sales increased by nearly 18% over prior year to $404 million, and adjusted EBITDA was $8.4 million, a 38% year-over-year increase, which was in line with our plan. A quick summary of some key events since our last call. We raised approximately $110 million in net proceeds from our green convertible senior notes offering. We plan to use the proceeds from this financing to provide capital to support future growth, fund specific sustainability initiatives, support working capital needs, make sure our suppliers are healthy and ready to expand with us in the coming years, and finally, to pay down some higher interest rate debt. We published our 2022 ESG report during the quarter. Please turn to slide six for highlights from the report. The wind turbine blades we produced during 2022 will help reduce CO₂ emissions by approximately 410 million metric tons over their expected 20-year operating lifetime. We made progress towards our 2030 goal of carbon neutrality by reducing overall CO₂ intensity by 16%. We achieved our annual waste rate reduction goal of 5%, enhanced our global behavior-based safety program to further reinforce positive safety behaviors at all of our facilities, transitioned our diversity, equity, and inclusion program to IDEIA, or Inclusion, Diversity, Equity, and Awareness, because without inclusion, you don't get the benefits of diversity and equity. We increased the diversity of our board and global leadership team. In furtherance of our efforts to enhance our corporate governance practices, we are asking our shareholders to approve the phase out of our staggered board and eliminate supermajority voting requirements from our charter documents at our annual meeting later this month. During 2023, we plan to make further progress on our ESG goals. For example, we will be expanding our rooftop solar in Turkiye, as well as investing in wind turbines, also in Turkiye, to power our facilities with renewable energy. With this investment, we expect to be able to reduce our global greenhouse gas emissions by nearly 20% while at the same time reducing our operating costs. This is a great example of what wind energy can do for companies: eliminate volatility of market rates, reduce the cost of energy, and therefore improve financial results, all while reducing greenhouse gas emissions. Now for a quick update on our global operations, including our service and automotive businesses. Please turn to slide seven. During the fourth quarter, we announced and recorded material restructuring and impairment charges with respect to closing our China operations and additional headcount reductions in our other manufacturing facilities and corporate functions. We expect these actions to result in structural cost savings of approximately $20 million to be realized in 2023 and beyond while continuing to focus on operating efficiencies to drive annual productivity savings of over $20 million per year, which we have consistently achieved over the past three years. We were able to terminate our lease for Yangzhou, China, on terms more favorable than we were planning on, and as of March 31st, we have no further obligations with respect to the lease. We have also reduced our headcount in China to about a half dozen people that will carry out the administrative activities to wind down our legal entity over the balance of this year. We are also in good shape on the other structural actions that we took and are currently at a run rate to generate our targeted savings. Our wind blade facilities performed to plan in the first quarter. We produced 655 sets and achieved a utilization rate of 84%. We are working on a handful of volume changes with our customers, both up and down, but don't expect those changes to impact overall revenue guidance. In global service, sales were down year-over-year due to a reduction in technicians deployed to revenue-generating projects due to a combination of inclement weather, the completion of a large customer campaign in 2022, and an increase in time spent on non-revenue generating inspection and rework. For the second quarter, we expect service sales to ramp up again, driven by normal seasonality and customer campaigns. We remain focused on driving profitability and expanding our services outside of the U.S. Things have continued to progress nicely in our automotive business. We expect to be able to move 3+ programs from development to production during the year, therefore expect to have 5+ programs in production by year-end. These innovative programs are a combination of EV passenger vehicle parts, Class 8 cabs and cab structures, and commercial delivery vehicles. We continue to explore strategic alternatives for this business to enable us to scale faster and are encouraged by the initial discussions and expect to have more information to share by the end of Q2 or early Q3. As it relates to our supply chain, the situation has been largely unchanged since our last call, although it continues to be somewhat challenging, it's significantly better than during the last two years. We continue to expect the overall cost of raw materials to trend down compared to 2022, while logistics costs have generally returned to pre-pandemic levels. With our contract structure and shared pain-gain approach, we expect to have a net benefit in 2023 over 2022. As we've discussed over the last couple of quarters, we see 2023 as a transition year while the industry awaits formal implementation guidance related to key components of the IRA in the U.S. and clarity around more robust policies in the EU, such as the recently proposed Green Deal Industrial Plan aimed at speeding up the expansion of renewable energy and green technologies while building on previous initiatives such as the European Green Deal and REPowerEU. Since we last spoke, the EU announced a deal to reach 42.5% renewable energy by 2030. Dedicated areas are to be set up where countries are required to approve new renewable energy installations within 18 months, and outside of those areas, timing will be limited to 27 months. Although it still needs to be endorsed by the European Parliament and Council in order to become law, and that's expected to be no later than the second half of 2024, this would provide permitting relief for 100 gigawatts of wind currently stuck in permitting queues. Here in the U.S., we continue to wait for guidance on key areas including domestic content, direct pay, the advanced manufacturing production credit, and transferability of credits. The latest we've heard is that we may receive guidance on some key remaining aspects as early as by the end of Q2. Others may be later than that. We'll wait and see. While we recognize the challenges the wind industry continues to face in the near term, we remain confident that demand for wind energy will strengthen once the current regulatory uncertainty is resolved, as well as being driven by the continued focus on energy security and independence globally. We believe TPI remains in a unique position with our strategically located footprint, along with strong partnerships with our customers and suppliers to improve profitability in the near to mid-term and to expand our operations and therefore market share as demand begins to outpace capacity once wind installations begin to accelerate again. While the prospect of growing our capacity is exciting, we expect our wind revenue to eclipse $2 billion, yielding a high single-digit adjusted EBITDA margin and free cash flow as a percentage of sales in the mid-single digits over the next couple of years, and this is without expanding our existing footprint. Today, we're operating 37 lines and have 11 lines of capacity available within our existing facilities. This capacity consists of five lines in Newton, Iowa four lines in Juarez, Mexico, and two lines in India. The lines in Iowa are reserved by GE and the lines in India are currently reserved by Nordex. Although we have not formally announced a deal, the four lines in Juarez, Mexico, are also spoken for, and we are working to finalize the contract for those lines by the end of Q2. We plan to have all of these lines formally under contract by the end of 2023 and in production at some point during 2024. As we exit 2024 and enter 2025, we expect to have at least 44 lines globally that are installed and operational. These 44 lines will provide us with approximately 3,600 sets per year or 14 gigawatts of capacity. In the IEA's updated Net Zero by 2050 scenario, wind needs to reach over 400 gigawatts of installation per year with approximately 80% onshore and 20% offshore. The market would have to be almost 5x larger than it was in 2022. Clearly, 14 gigawatts of capacity will not be sufficient to meet the long-term needs of our customers. Strategically growing our global capacity and footprint over the next couple of years is a discussion we are engaged in today with all of our customers. With that, let me turn the call over to Ryan to review our financial results. Thanks, Bill. Please turn to slide nine. All comparisons discussed today will be on a year-over-year basis for continuing operations compared to the same period in 2022. Please note our prior year financial information has been restated to exclude the discontinued operations from our Asia reporting segment as we shut down our operations in China at the end of 2022. In the first quarter of 2023, net sales were $404.1 million compared to $343.5 million for the same period in 2022, an increase of 17.6%. Net sales of wind blades, tooling, and other wind-related sales, which excludes field services and hereafter I'll refer to as just wind sales, increased by $65.8 million in the first quarter of 2023 or 20.5% compared to the same period in 2022. The increase in net sales of wind during the first quarter was primarily due to a 20% increase in the number of wind blades produced, as well as higher average sales prices due to the mix of wind blade models produced and the impact of inflation on wind blade prices, partially offset by foreign currency fluctuations. Our utilization in the first quarter of 2023 was 84%, compared to utilization of 71% in the first quarter of last year. Field services sales decreased by $2.7 million in the first quarter compared to the same period in 2022. The decrease was due to a reduction in technicians deployed on revenue-generating projects due to a combination of inclement weather, the completion of a large customer campaign in Q1 of 2022, and an increase in time spent on non-revenue generating inspection and rework. Automotive sales decreased by $2.6 million in the first quarter compared to the same period in 2022. The decrease was primarily due to a reduction in the number of composite bus bodies produced and a decrease in sales of other automotive products, partially offset by an increase in fees associated with minimum volume commitments. Net loss attributed to common stockholders was $37.3 million in the first quarter of 2023, compared to a net loss of $29.9 million in the same period in 2022. In the first quarter of 2023, our net loss attributable to common stockholders includes $15.2 million of preferred stock dividends and accretion compared to $14.1 million in the same period in 2022. Adjusted EBITDA for the first quarter of 2023 totaled $8.4 million compared to $6.1 million during the same period in 2022. The increase in adjusted EBITDA was primarily due to earnings on higher sales, lower startup and transition costs, cost reduction initiatives and net favorable foreign currency fluctuations, largely offset by inflation and increased production costs due to a significant change in a customer's inspection criteria requirements. Moving to Slide 10. We ended the quarter with $164.2 million of unrestricted cash and cash equivalents and $195.1 million of debt, which includes the net proceeds from the $132.5 million, 5.25% green convertible senior notes we issued in the quarter, which Bill talked about earlier. We used $87.1 million of free cash flow in the first quarter of 2023 compared to $86.6 million in the same period in 2022. Our use of cash during the quarter was for $37.6 million payments of outstanding payables, severance, and other restructuring activities associated with the shutdown of our China operations. Our gross contract assets drew $35.4 million due to an increase in unbilled wind blade production and timing of advanced payments. The quarter also included $8.1 million in payments related to our associates annual cash bonus program and $6.3 million down payment to acquire wind turbines that will provide renewable energy for our manufacturing facilities in Turkiye. We also had capital expenditures of $3.3 million during the first quarter. Moving on to Slide 11. We are confirming sales and adjusted EBITDA guidance that we issued last quarter. Still a lot to play out over the year, but we are working on a handful of volume changes with our customers, both increases and decreases. They will likely net out sales closer to the bottom end of our guidance range with what we know today. In addition, I wanted to provide some color on our adjusted EBITDA guidance for 2023. Similar to sales, there's still a lot of things to play out during the year, in particular our union negotiations with Turkiye and foreign currency fluctuations. We still feel comfortable with our guidance range in the low single digits. When we look at second quarter, most of our wage or merit changes kick in, so I expect the second quarter will likely be the low water mark for adjusted EBITDA margin. In the second half of the year, we expect incremental benefits from our productivity improvements and improving raw material and logistics costs to further take shape and offset most of the wage headwinds. Moving on to CapEx. We are revising our 2023 CapEx guidance from $25 million to a range of $40 million-$45 million. The increase in expected CapEx is driven by the project we discussed in Turkiye to purchase two wind turbines, as well as incremental capital needed to start up our two open manufacturing lines in India. As we think about the cadence of our overall cash flows throughout the rest of the year, we do expect our cash balance to remain about flat with the end of Q1. There will be some puts and takes by quarter, but generally it should be relatively flat. Now, as we expect positive cash flows from adjusted EBITDA we generate and the recovery of the elevated levels of in-process contract assets. Offsetting these positive cash flows will be capital expenditures, income tax payments, interest payments, and as Bill alluded to earlier, paying down some higher interest rate lines of credit. I don't expect a lot of other working capital changes over the balance of the year as our sales are projected to be flattish until the fourth quarter, which we currently expect to be our lowest sales quarter of the year due to seasonally higher holidays, which means less production days as well as a couple of lines that will begin to prepare for transitions. With that, I'll turn the call back over to Bill. Thanks, Ryan. Please turn to slide 13. We remain very bullish on the energy transition and believe we will continue to play a vital role in the pace and ultimate success of the transition. We remain focused on managing our business through the short-term challenges in the industry and are excited about how we are positioned to capitalize on the significant growth the industry expects in the coming years. I want to thank all of our TPI associates once again for their commitment, dedication, and loyalty to TPI. Finally, I want to remind you about our upcoming annual stockholders meeting on May 24th and encourage you to vote in favor of all stockholder proposals, including a couple of key amendments to our charter to enhance our corporate governance practice, specifically proposal 4 and proposal 5, which, if passed, will phase out our staggered board and eliminate super majority voting requirements from our charter documents. I'll now turn the call back over to the operator and open the call for questions. Thank you. We will now begin the question and answer session. To ask a question, you may press Star then One on your telephone keypad. If you're using a speakerphone, please pick up the handset before pressing the keys. To withdraw your question, please press Star then Two. Your first question comes from Julien Dumoulin-Smith from Bank of America. Please go ahead. Hey, team. Thank you for the time. Hope you guys are well. You bet. Thanks, Julien. Good to speak with you. Likewise. All right. Just digging in here a little bit, you talked about at least 44 lines in the prepared remarks here. Last quarter, you talked about ongoing finalization of some of those negotiations here. Can you talk about what you've been able to crystallize here in terms of visibility against that 44 lines? Then also perhaps even more critically, how you think about what that upside is to the 44 lines? You alluded to it a little bit in your prepared remarks, but where would that come from? How do you think about the timeline for getting that visibility here? First for the 44 lines, we feel, although again, we don't have necessarily final contracts on all of those lines, Julien, we have the majority of, you know, signed memorandums of understanding, as well as letters of intent. Feel very good with those 44 lines. That 44 lines, as we talked about last quarter, does not include currently the 4 lines that we have for Nordex and Matamoros. If for some reason we were to keep those lines, clearly we could move that 44 lines- 48 lines. Our intent right now is not to, but, you know, time will tell. What you alluded to, and what I alluded to is clearly there's going to be a need for more capacity in the market. As, you know, as we get clarity on the IRA, we get more clarity and implementation in the EU, and we start to see installs accelerate. You know, we're looking right now at our existing footprints. Do we expand on existing footprints? Do we look at different geographies? As I mentioned, we're in strategic discussions with each of our customers as to where we can best serve them from a long-term perspective, not necessarily in the next year or two, but more from a long-term perspective. Excellent. Thank you for all that commentary. If I can be a bit, a little bit more financially oriented here, look, I'm trying to read between the lines a little bit on what you're saying in terms of ramping the CapEx here specifically to be to buy your own wind energy, as it turns out. It seems like a statement of confidence in your liquidity to say, "Look, we're gonna invest today to decrease our future operating costs." Can you talk a little bit about your where you stand today, your confidence in sourcing incremental sources of financing today, and how you think about this the ramp here at... The best way to describe it? Hey, Julien, this is. Hey, Julien, this is Ryan. You know, I think with what we did with the convertible note, I think that provides us the ample firepower here as we move forward. You know, I think that one of the things I've been focusing in on is our working capital. While it's okay to go out and get external capital when you need it, I also wanna make sure we have an efficient balance sheet. As we think about moving forward, we're very laser-like focused in on that. I think there's incremental capability to go extract more value out of our balance sheet today. You saw us raise CapEx, but we're, you know, we're not lowering where our cash balance is at today. That, I think, is a sign of us indicating we feel pretty confident where we're at. You know, where we're at cash-wise, you know, we're in a position today where we think the windows will open and close pretty quick with opportunities with our customers. You know, we do have some firepower on our balance sheet to make sure we're able to take advantage of that. Did you guys quantify how much your working capital requirements have increased overall, just as you think about this ramp? No, we haven't quantified that. You know, I'd say generally speaking, as we look at our existing working capital and where we're at today, I think we will try to really push to offset any incremental needs with driving efficiencies through our balance sheet. I think that's the way to put it. Okay. All right. Well, I'll leave that there. Thank you guys very much. Best of luck. All right, speak soon. Thanks, Julian. Thank you. Your next question comes from Justin Clare from ROTH MKM. Please go ahead. Hi, guys. Thanks for taking our questions. I guess first off here, I wanted to dig into the treasury guidance here. We have gotten some guidance from the treasury, but we're still awaiting guidance on domestic content, the manufacturing credits. Was wondering if you could just talk about, you know, whether you're seeing your customers and developers waiting on the guidance before moving projects forward. Like, is this a significant, you know, hurdle to moving projects ahead here? If we do get that guidance, you know, could we anticipate an uptick in orders, you know, at that point in time? Hey, Justin. Thanks for the question. I would tell you, I think there are some developers that are maybe better capitalized and more confident in where that guidance will ultimately roll out, so it hasn't slowed them down that much. I think there are others that are a little bit more conservative and waiting to see. I think depending on how some of this guidance turns out may, you know, make or break certain projects. I think it's a combination of things. Clearly there is some holdback. I think also, you know, the interest rate environment is creating some hesitation as you start to look at ROIs. I think although, you know, as we mentioned in the prepared remarks, the supply chain, at least from our perspective, is improving fairly significantly, and we expect to continue to see an improvement through the year. I think we're still dealing with, you know, inflationary impacts that are creating some challenges to some of the projects. With that said, when we do get guidance, I absolutely expect to see, you know, orders begin to pick up. I don't know if you saw the article today with GE, but GE had a very positive article today on the US market, notwithstanding, you know, the IRA and where that's going. Very bullish on the US market, I think we're in that same boat. I do think once we have, you know, more clear guidance that certainly we'll see order books start to build. I do see, you know, we are already seeing some of that already, even without the full guidance. Okay, great. appreciate all the, all the color there. Wanted to ask about, you know, assuming that you do sign contracts for your lines, like let's say in India you get a contract signed by the end of Q2, what's the timeframe between getting the contract signed and then starting up that facility? And how long does it take to kind of get to full operational capability? You know, if we look at the US and Mexico, is that timeframe similar? If you were to sign a contract for your US facility by the end of the year, what does that look like? If you could talk to, you know, how Mexico might operate as well. It's, it's really a function of demand and when our customers want, you know, want the volume. It's not necessarily just, you know, if we're going back and forth on a contract, getting it signed versus not. We can start moving forward before we have a finally signed contract, depending on what the volume needs are for the customer. I would tell you in both or in all three of them, well, India, Mexico and Iowa, the startup will be much quicker than it would typically be because these are, you know, they're not green fields. Iowa will be a little bit trickier just because it's, you know, we're gonna have to hire the workforce again in a tight labor market there. It's probably 18 months in Iowa, kind of from start to finish. I would say in Mexico and India, it's probably half that or a third of that, quite frankly. Okay. great. Thanks. I'll pass it on. You bet. Thanks, Justin. Thank you. Your next question comes from James West from Evercore ISI. Please go ahead. Hey, good afternoon, guys. Hey, James. How are you? I'm doing well, Bill. Bill, I saw that those GE remarks as well, which were extremely bullish remarks on the U.S. market. And I'm curious, 'cause, you know, they're talking about being sold out now for 2023 versus, you know, half sold this time. I think last year was the commentary. How does that translate into your visibility? Is this a question of they're sold out now and other customers are getting sold out, and you'll see the orders come in pretty quickly? Or, I mean, I guess what's the timeline here to when your memorandums turn into contracts? Yeah. Well, with GE in particular, we expect those by the end of Q2. Okay to turn those into formal contracts. Right. Right. Yeah, I mean, it's, it's, you know, their visibility is great for our visibility, as you might expect, right? Right. Right. You know, we have a lot of capacity for them in the U.S., so, you know, the better visibility they have, obviously that's really good for us as well. Of course, of course. Then maybe a follow-up for me with the turbine guys having had, you know, difficult conditions the last year or two years, and kind of rethinking, you know, some of their model, and trying to get their supply chains in order and inflation, you know, dealing with inflation. Are they also, you know, talking to you about, you know, increased standardization of blades and trying to make the entire process, you know, easier, more efficient? Yeah. I would say, James, it's less. I mean, they are obviously talking about standardization. Mm-hmm ... talking about modularization. They're talking about, you know, slowing down NPI, new product introduction. From a standardization, it's not as much standardization from a blade perspective across OEMs as it is... Okay ... standardization of how we build the blades in each of our factories, their factories and maybe our competitors' factories when it's the same blade type. It's about standardization across a single blade type across all of the manufacturing footprint, whether it's in. Okay ... sourced or outsourced, as opposed to standardizing, you know, a Siemens blade runs on a Vestas turbine. Nothing like that. Okay. Okay, got it. Thanks, Bill. Yep. Thank you, James. Thank you. Your next question comes from Greg Wasikowski from Webber Research. Please go ahead. Hey, Bill and Ryan. Good afternoon. How are you doing? Good, Greg. How are you? Yeah, doing fine. Thanks. First question is, appreciate all the guidance that you guys are giving with so many unknowns out there. You guys have already touched on this, but on the 11 available lines, I was wondering if you'd recap or maybe get a little bit more granular around the cadence of those, in terms of startup and the ramp to kind of full operations and... Yeah When from now to 2025 that could potentially be hitting P&L. Sure. As you see it now. I will start. I'll start, and if I get it wrong, Ryan will correct me. On India, we're looking at likely starting by the end of this year, starting, you know, getting those lines ready to go by the end of this year. You would see production ramping to full production in 2024. By the end of 2024, entering 2025, you'd be at full ramp. In Iowa, right now, it's probably starting to build our team in the back half of this year, with start of production. Probably, maybe it's later in the year and start production probably mid-2024 at this point, and then hopefully getting to a point where we're at almost full ramp speed by the end of 2024 going into 2025. In Mexico, it's the end of this year we'll start. It's really that one's pushed to the right just a little bit, so it's probably kind of a first quarter-ish start of production, with being at full ramp by the end of the year. You know, I would expect. Again, depending on volumes by region, customer, all things, if they were, you know, kind of everything was clicking on all cylinders, exiting 2024, moving into 2025, we'd be pretty much full ramp on all 44 of the lines. Did I get that right? Yeah. Okay. Got it. Thank you, Bill. That's very helpful. Follow-up is just on your, on your contracts. Was just wondering if you could talk a little bit more about the process for incorporating inflation into the contracts, so labor, cost of materials, commodity, pass-throughs, et cetera. Would you characterize those conversations as being more sympathetic in nature now versus, you know, last year or a few years ago? Is there an actual, you know, physical difference in terms between the new, you know, new contracts that you guys are looking at or have signed in the last, you know, six months to a year versus, like, contracts from a few years ago? Yeah. There, there's a lot to unpack there, but I would say in general, I would say there's much more awareness, as far as, you know, like inflation and... You know, there's always been a focus on the bill of material. You know, that's 60%-65% of, you know, total cost is the, is the BOM. That's been where the focus has been, and that's where you would see the most shared pain-gain. You know, price goes up, we share the price with them. Price goes down, they get some savings. With some of the inflationary environments we've seen on wages and other things, as well as currency fluctuation, there's more attention being paid to that by us and by our customers. Some of the kind of the limits we've put on it, probably look pretty good for our customers right now and not as good for us in some certain in some circumstances. We're working on those as we re-up, either extend or renew or enter into new contracts. We're looking at some of that as well. We're still, you know, working through the details of the new contract format. It's little early to say exactly how, where we'll wind up with our customers. Clearly, both sides are much more attuned to, you know, dealing with inflationary environments. We've been in a deflationary environment for so long until the last couple of years that it was usually pretty simple to do. I'll tell you, there's a lot more focus on it and a lot more work being done around there. A little bit early yet to tell you exactly how that's gonna fall out. Understood. Okay. Thanks, Bill. Yep. Thanks, Brad. Thank you. Your next question comes from Eric Stine from Craig-Hallum. Please go ahead. Hi, Bill and Ryan. Eric, how are you? Hey. Doing well. thanks. This might be tough to answer, but I guess I'll ask it anyway. You know, I know you've got the collaboration agreement, with Vestas, you know, kinda stepping the relationship up to an extent, and you're talking to all your customers about what the future may look like. I'm just curious, is there a way to kinda describe what the interaction with Vestas is compared to some of your other customers? And is it possible that you could have, you know, some sort of a enhanced relationship with those other customers as well? Yeah. I would tell you our. We have actually really good relationships with all of our customers. They're a little bit different. Each one is a little bit different. I would tell you that, you know, we have, we spend a lot of time with them. Over the last year, we've transitioned a lot of what used to be more transactional to a lot more strategic meetings. Higher level, more frequency with our customers, talking about not the issue of the day, but about the issue of two years, three years, five years, 10 years down the road. I would tell you that's happening with all of our customers. you know, we do have a little bit of a different contractual structure today with Vestas, but the way the relationships work are very similar between customers in that they are very collaborative. Especially now where I think, you know, It's, it's been a tough couple of years, as we all know, but I think our customers are beginning to see what the, what the potential is and starting to look, you know, more strategically long term at what their needs are gonna be from a geographic standpoint. That's really forcing a lot of these more strategic discussions, which works great for both parties. Got it. I mean, basically, to put it differently, I mean, your other customers, the relationship is, I mean, it's migrating more towards, you know, kinda what you were talking about in that, and when you signed that agreement, I believe it was you announced it on your third quarter call last year. Mm-hmm. Yeah. Okay. Absolutely. Yep. All right. Maybe last one for me. You know, I know it's been less important here over the last couple of years given activity levels, but, you know, I know that, certainly speed of transitions. That was a big focus. You know, as you come out of this and you look longer term and you think about what the business looks like, I mean maybe where do you stand in that, you know, the strides you've made and potentially the impact that has? Yeah. I think we've made, you know, really good strides over the last several years. As you indicated, that has been a focus. You know, I think at our last Investor Day, we talked about a 50% reduction in time and cost due to the transitions. Right after that, COVID happened. It's been a little bit hard to measure that. I feel very confident in where we're at. Instead of having kind of a global team that would go site to site, the focus is now to really build transition teams at each of our locations so that we can do multiple transitions in multiple geographies more effectively. It's not like we have to stack them because we only have one team. I would tell you, we're building that talent pool, making sure that in each region we have the qualified folks that are experienced with the transition, and that will only help to enable us to do more transitions at the same time, if that's the case, but also do them more cost effectively. Okay, thanks. Yep, thanks. Thank you. Your next question comes from Graham Price, from Raymond James. Please go ahead. Hi. Good afternoon. Thanks for taking the questions. For the first one, was just wondering if we could get an update on carbon fiber and epoxy resin costs in particular. I know from your comments it sounds like material costs overall should be trending lower throughout the year. Just wanted to get a little color on that. Yeah. We're in a pretty good position with both carbon fiber as well as epoxy. Indices have come down on epoxy resin over 2022. Now, we're still not at pre-pandemic levels, but we are better than we were in 2022, and we see some more improvement through the balance of the year. There is adequate capacity in the world today, which is helping. As well as with logistics. When I talk about logistics being back to pre-pandemic levels, I'm talking about inbound as opposed to outbound. From an inbound logistics standpoint, with the capacity in China, it gives... You know, kinda opens up China again a little bit for us from a raw material sourcing standpoint because the logistics costs have come back down. From that standpoint, a lot of capacity and the pricing is pretty solid. On carbon fiber, similar. We've seen. Now, it's still higher than it was from a capacity standpoint. We had, you know, problems last year a little bit with that, but capacity seems to be fine this year. It's still elevated in cost from where it was pre-pandemic, and that's primarily because it's such an energy-intensive process to produce it. With energy costs where they're at, especially in Europe, that's continuing to weigh on those costs. Overall, in pretty good shape from that standpoint. Okay, got it. For my second one, was just wondering about currency exposure in Turkey. Obviously the lira continues to be basically in a free fall. Was wondering how that impacts your profitability. Yeah. From a foreign currency perspective, you know, I think the lira, we'd prefer it to be even more of a free fall with the inflation pressures we've had there. I think, you know, we talked about this on our last call, that Turkey raised the minimum wage by 54.6%. And certainly that's something we're contending with right now because we're not seeing the same reaction in the lira, in its currency. Just as a reminder, our functional currency in Turkey is the euro. For us, as the dollar weakens against the euro, that's actually a good thing for us. As the lira weakens against the dollar and the euro, that's also a good thing 'cause as we bear manufacturing costs and local labor dollars in the lira and also production expenses in local lira, as that weakens, that's a good thing for us. As we look forward, we're certainly hoping that the currency fluctuations that they mirror that of what the pressures we're seeing in inflation are right now. You know, our first quarter was impacted. You know, we're already experiencing some of that inflation pressure in the first quarter and didn't have the same reaction with the lira. Got it. Got it. Understood. Thank you. Thank you. Thank you once again. If you wish to ask a question, please press star then one on your telephone keypad. We'll pause for a moment for any further questions to register. To ask a question, please press star then one. Thank you. There are no further questions at this time. I would now like to turn the conference back over to Mr. Bill Siwek for any closing remarks. Thank you again for your time today as well as your continued interest and support of TPI. Look forward to speaking to you again next quarter. Thank you. Thank you. The conference is now concluded. Thank you for attending today's presentation. You may now disconnect.