Good afternoon, and welcome to the Trex Company third quarter 2021 earnings conference call. All participants will be in listen-only mode. Should you need assistance, please signal a conference specialist by pressing the star key followed by zero. After today's presentation, there will be an opportunity to ask questions. To ask a question, you may press star then one on your telephone keypad. To withdraw your question, please press star then two. Please note, this event is being recorded. I would now like to turn the conference over to Viktoriia Nakhla. Please go ahead. Thank you all for joining us today. With us on the call are Bryan Fairbanks, President and Chief Executive Officer, and Dennis Schemm, Senior Vice President and Chief Financial Officer. Joining Bryan and Dennis is Bill Gupp, Senior Vice President, General Counsel, and Secretary, as well as other members of Trex Management. The company issued a press release today after market close containing financial results for the third quarter of 2021. This release is available on the company's website. This conference call is also being webcasted and will be available on the investor relations page of the company's website for 30 days. I would now like to turn the call over to Bill Gupp. Bill? Thank you, Viktoriia. Before we begin, let me remind everyone that statements on this call regarding the company's expected future performance and conditions constitute forward-looking statements within the meaning of Federal Securities laws. These statements are subject to certain risks and uncertainties that could cause actual results to differ materially from those expressed in the forward-looking statements. For a discussion of such risks and uncertainties, please see our most recent Form 10-K and Form 10-Qs, as well as our nineteen thirty-three and other nineteen thirty-four act filings with the SEC. Additionally, non-GAAP financial measures will be referenced in this call. A reconciliation of these measures to the comparable GAAP financial measure can be found in our earnings press release at trex.com. The company expressly disclaims any obligation to update or revise publicly any forward-looking statements, whether as a result of new information, future events, or otherwise. With that introduction, I will turn the call over to Bryan Fairbanks. Thank you, Bill, and good evening, everyone. Thank you for joining us today to review Trex Company's third quarter results and year-to-date performance, along with our business outlook. This was another great quarter for Trex. Robust demand, fueled by the unmatched strength of the Trex brand, along with our increased manufacturing capacity, combined to drive 45% year-over-year sales growth to a record $336 million. Dennis will provide more detail around our financial results, but I want to highlight that despite considerable inflationary headwinds, Trex reported a strong EBITDA margin of over 32% and an increase in net earnings of 73% from the prior year period and a record $0.64 per share. Thank you to all of our Trex team members, our distribution team, our partners of both the pro and DIY channels, as well as our contractor community for making this strong growth and performance possible. Trex continues to successfully execute on our long-term strategy of gaining market share from wood within an expanding decking market. Outdoor living remains one of the fastest-growing categories within the repair and remodel sector, and the strength of the Trex brand, coupled with our expanded manufacturing capacity, are key competitive advantages helping us to effectively unlock potential market share and drive long-term growth. We continue to benefit from increasing consumer interest in our environmentally friendly, low-maintenance product portfolio that transforms and enhances the outdoor living experience. With the strong momentum in the category and our success to date in converting share from the wood decking market, our analysis suggests an acceleration in market share gains from wood. It is estimated that gains from wood are now approximately two percentage points in market share per year, up from one percentage point, with composites accounting for approximately 24%-25% of the overall decking market volume in North America. Last week, we had the pleasure of hosting our channel partners at our annual distributor meeting in California, where it was great to be face to face for the first time since the start of the pandemic. Our distributors are the best in the business and are poised to execute growth to convert wood and continue the success in growing composite decking and railing market. Across the board, there was universal agreement that we are early in the wood conversion opportunity, and we will all need to invest for growth. We continue to track our website activity as a proven indicator of consumer demand. Traffic to Trex websites remains robust, with high levels of dealer and contractor searches in the third quarter. trex.com and decks.com together continue to account for nearly 70% of the category website traffic, reflecting the company's unparalleled strength in capturing consumer interest in outdoor living. As consumer decisions are increasingly driven by digital content, we continue to strengthen and enhance our digital footprint to support long-term sales growth. We remain focused on ensuring the capacity to service our channel partners is aligned with both current demand and expected future growth. Having recently completed a $200 million manufacturing capacity expansion at our Virginia and Nevada facilities. Our engineering team is currently installing incremental decking lines within our new Virginia facility that will further expand our production capability. Additionally, we recently announced plans to develop a third U.S.-based manufacturing facilities on approximately 300 acres in Little Rock, Arkansas. When this plant opens in 2024, Trex will have the strategic advantage of unmatched geographical coverage, with sites servicing the East Coast, West Coast, and central regions that will provide our customers with better access to Trex Residential products when and where they need them. The new site represents a strategic investment in our company's future and the success of our value channel partners. Little Rock, Arkansas, emerged as the best fit for our future needs as it offers proximity to essential raw materials, a strong pool of qualified and skilled labor, proximity to key growth regions for wood conversion, and adjacency for major transportation hubs that can optimize freight costs. Trex plans to invest approximately $400 million over five years, funded primarily through ongoing cash generation. With the potential to become our largest manufacturing facility over time, the Arkansas manufacturing campus will eventually include buildings dedicated to decking and railing production, plastic film recycling and processing, reclaimed wood storage, warehousing, and administrative offices. Construction is slated to begin early next year with a modular development approach calibrated in alignment with demand trends. We expect initial production output to begin in 2024, and over time, the facility will employ approximately 500 people. These expansion activities provide Trex with additional capacity to flex with demand by adding capacity as needed, while providing bandwidth to pursue opportunities to expand domestically and internationally as we continue to drive wood conversion and capture incremental market share from the strength of Trex products and the brand. While focused on capacity expansion and strategic initiatives that support future growth opportunities, we remain committed to operating for the good of our employees, communities, and the planet, consistent with our heritage of advancing environmental and social responsibility. We continually strive to minimize the environmental impact of Trex operations even as our company grows, and remain one of the largest recyclers of polyethylene in the U.S., diverting 850 million pounds of plastic and reclaimed wood from landfills annually. We remain mindful of the need for Trex employees and partners to be respected and empowered to perform at their best, and we continue to support the communities where we work by giving back through community-based organizations and programs. I will now turn the call over to Dennis Schemm for details on our third quarter and year-to-date financial performance and our business outlook. Dennis? Thank you, Bryan. I'm pleased to report on Trex's strong third quarter results and year-to-date performance, as well as our expectations for the rest of the year. During the 2021 third quarter, we experienced impressive sales growth of 45% to a record $336 million in total net sales. Trex Residential sales increased 46% to $319 million, primarily led by strong volume growth, limited channel inventory, and a small benefit from our recent price increase that aided September results. Trex Commercial products contributed $17 million to net sales, up 28% from the 2020 quarter. During the third quarter, top line was constrained due to labor availability, but we were able to manage through labor shortages, service our customers, and deliver strong performance. Consolidated gross margin for the third quarter was 38.2%, reflecting the benefit of higher sales and manufacturing volumes, offset by continued inflationary pressures on raw materials, higher transportation costs, and labor constraints. This compares to gross margin of 36.7% in the year ago quarter, which included the impact of the $6.5 million Trex Residential warranty reserve charge. Excluding this charge, third quarter 2020 consolidated gross margin was 39.5%. Inflation and higher transportation costs impacted gross margins by 750 basis points in the quarter. We expect improvement in gross margin in the fourth quarter, benefiting primarily from our recent price increase and increased production efficiencies. Third quarter 2021 gross margins for Trex Residential and Trex Commercial were 38.9% and 24% respectively. SG&A expense was $30 million, compared to $28 million in the same period last year. SG&A in the third quarter includes a gain on insurance proceeds of $3.7 million related to the fire at the Virginia facility that occurred in March of this year. Excluding this gain, SG&A was $34 million for the 2021 quarter. As a percentage of net sales, excluding the insurance recovery, third quarter SG&A was 10.1% of sales, demonstrating the positive operating leverage inherent in our business model. Strong sales growth amid disciplined SG&A spending resulted in significant operating leverage in the third quarter, even as we continued to experience inflationary pressures. Bolstered by strong top line growth, 2021 third quarter net income grew 73% to $74 million or $0.64 per diluted share from net income of $43 million or $0.37 per diluted share in the 2020 third quarter. EBITDA increased 76% to $108 million, and EBITDA margin expanded to 32.2% compared to EBITDA of $61 million and EBITDA margin of 26.6% in the 2020 third quarter. Excluding the warranty charge, third quarter 2020 net income was $48 million or $0.41 per share, and EBITDA and EBITDA margin were $68 million and 29.4% respectively. Now, moving forward to our financial performance year-to-date, consolidated net sales increased 37% to $893 million compared to the same period last year. Higher net sales were primarily driven by a 39% growth in Trex Residential sales to $851 million compared to the same period last year. The growth in Trex Residential sales was substantially all due to volume growth as our capacity expansion program was fully operational as of the end of May, enabling us to capture additional growth. The increase in net sales at Trex Residential included a small impact from our price increase realized in September. Trex Commercial contributed an additional $42 million to net sales. Net income year-to-date increased to $184 million or $1.59 per diluted share compared to $132 million or $1.14 per diluted share during the same period in 2020. EBITDA increased 44% to $271 million, and EBITDA margin improved to 30.3% compared to EBITDA of $188 million and EBITDA margin of 28.8% in the same period in 2020. Excluding the warranty charge, year-to-date 2020 net income was $137 million or $1.18 per diluted share, and EBITDA and EBITDA margin were $194 million and 29.8% respectively. Year-to-date capital expenditures were $124 million, with the majority of this investment supporting the capacity expansion program completed in May. In addition, year-to-date, we repurchased 576,714 shares of Trex outstanding common stock under our stock repurchase program at an average price of $90.68 per share. We have 8.2 million shares remaining to be repurchased under the current program. Also, since the end of the third quarter, we have been active with share repurchases under the same program. Looking ahead, we expect the following. Fourth quarter consolidated net sales to range from $295 million-$305 million, representing year-on-year growth of 31% at the midpoint and reflecting strong consumer demand and further infill to low channel inventories. In addition, we anticipate incremental EBITDA margin for the fourth quarter exclusively to be between 35%-40%. Our full year 2021 tax rate will be approximately 25%. Depreciation will range from $30 million-$35 million. Full year spending on CapEx is expected to be in the range of $135 million-$155 million, which includes the installation of additional decking production lines to further boost our capacity in existing facilities. Now, I will turn the call back to Bryan for his closing remarks. Thank you, Dennis. Based on our strong performance year-to-date and indications for continued healthy demand going forward, we are on track to deliver double-digit revenue growth for the full year 2021 and into 2022. As we mentioned last quarter, we continue to focus on cost reduction projects and identifying continuous improvement opportunities to enhance our margins. Specifically, our efforts are primarily centered on increased automation, modernization, enhanced energy efficiency, and improvements to raw material processing. At the same time, we intend to expand our marketing campaigns, highlighting the advantages of Trex decking over wood, as well as a focus on innovation and new product development that further strengthens our consumer brand and distribution advantages. These initiatives should help drive continued robust top line and profit growth and accelerated market share conversion. Operator, we can now take questions. We will now begin the question-and-answer session. To ask a question, you may press star then one on your telephone keypad. If you are using a speakerphone, please pick up your handset before pressing the keys. To withdraw your question, please press star then two. Please limit your questions to one with a single follow-up. Our first question is from Stanley Elliott with Stifel. Please go ahead. Hey, Bryan, Dennis. Thank you guys for taking the call and congratulations. I'm curious about the conversations that you're having within the channel and some of the research that you're doing, you know, online and whatnot. You know, the improvement that you've seen, the conversion on the wood opportunity to 2% has been pretty spectacular. Would you guys hesitate to guess kind of where you think ultimately this market could end up getting in terms of the conversion opportunity? Yeah, thanks, Stanley. Thanks for being on this evening. We continue to hear really great feedback from the marketplace and people's understanding of the opportunity with composites. With the product lines that we have with Enhance at the entry level and of course, our higher end products, there is a product for every segment of consumer. Unlike five, seven years ago, consumers know more about composites today. When we look out over the long term, that 45%-50% of the overall marketplace, we definitely see capable of getting to those type of numbers and share. Great, guys. Thank you very much, and best of luck. Thanks. Thanks. The next question is from Ryan Merkel with William Blair. Please go ahead. Hey, guys. Nice quarter. Good evening. Thanks. Thanks. Bryan, can you unpack the labor shortage comment that you made? How impactful was that in the quarter? Then are you making progress in 4Q? Yeah, I think one of the things, and we forget about this internally. As we work through adding all of this capacity, we needed to be able to staff up to support that additional 70% capacity. We did a pretty good job of that moving through the end of last year and into the beginning of this year. Some of those other labor shortages we had were offset because we were bringing people on ahead of time for that new capacity. It did start to catch up with us as we got into the second quarter and all of that capacity was available and definitely into the third quarter. Things are improving at this point. I wouldn't say it's where I want it to be today, but it looks much better than it did 90 days ago. We have had to make changes to some of our compensation schemes, incentives, sign-on bonus, stay for six months. Things like that we've had to put in place. Got it. Okay. On gross margin, I missed it. How much did supply chain hurt the third quarter? More importantly, in the fourth quarter, do you expect to make progress on gross margin since you're gonna be capturing more price? Yeah, Stanley. We came in at 38.2%, from a gross margin perspective. We were up 150 basis points. It was a really good quarter for us. I think the headline is we overcame 750 basis points of inflation in raw materials and labor and transportation. To me, that's the real news there, and I think that's pretty remarkable. We did that through a combination of better absorption, some you know, we had a little bit better pricing in there as well, and then our cost management and SG&A discipline. We did a really nice job. Just sequentially, you're gonna make progress in Q4 on gross margin? Yeah, we expect to see some progress there basically because we'll have a full three months worth of our price increase in place. Perfect. Thank you. We have a price increase coming in beginning in November as well, too. We'll have two months of that price increase come through. Inflation, unfortunately, has not abated at this point. When we talked last quarter, we had expected things to soften somewhat during the third quarter. It didn't. We are still working to catch up, and I'm confident that we will. We've taken more price increases this year than last time with the major price increase all the way back in 2012. Thanks for the color, guys. Thanks. Thanks. The next question is from Matthew Bouley with Barclays. Please go ahead. Hey, good evening, everyone. Congrats on the results in a pretty dynamic environment here. Thanks. Same topic on the gross margin side. Yeah, I think you said last quarter, maybe Dennis, you were talking to early 22%. You know, I think you kinda termed it getting back to the Trex gross margins that we're used to. Just any kind of update on how to think about the cadence of, you know, gross margin recovery beyond Q4 here? Thank you. Yeah. I do think sequentially, we will see a step up from Q3 to Q4. As we start rounding into the new year, you would also expect us to see gross margins, you know, north of 40%. It's gonna be based on, you know, continued look at pricing or pricing situation, as well as the cost out opportunities that Bryan talked about. We'll continue to focus on, you know, continuous improvement, automation, raw material formulations. Those will be our big focus areas going forward that will help us. Wonderful. Great. Thank you for that, Dennis. Second one on the Little Rock capacity. I guess number one, just if there's any quantification, I guess on how much capacity you may be adding when this is fully ramped. That's part one. Part two is, I'm just curious, as you picked the Little Rock area for this capacity, I'm curious if you can get into any color around the conversion opportunity from wood to composite in kind of the surrounding regions there. Thank you. Sure. We see the southern region as a excellent area where we can convert more of the pressure treated southern pine marketplace to Trex composites. That's one of the things that energizes us about the location we're in and being able to service some of those markets. From a size perspective, in essence, what we'll be building is buildings just like we just put here in Winchester. The engineering's done. We understand what the performance is. We've got all the drawings. We know how to build them along the way. So as I mentioned in my comments, it will be modular. We have the ability to add multiple buildings like this, and this will give us the long-term capability to grow. So we haven't put a specific number on it because it really carries us out over the next 10 years with the organization. Got it. Well, thank you, Bryan. Thanks, Dennis. Good luck, guys. Thanks. Thank you. The next question is from Trey Grooms with Stephens Inc. Please go ahead. Hey, good afternoon, everyone, and well done with another great quarter. Thanks, Trey. I'm kinda you know gonna follow up on this Little Rock expansion. You know, you mentioned that this was to address long-term demand trends and pursue new growth opportunities. One, I didn't know if there was anything you could expand on as far as new growth opportunities you mentioned. Secondly, you know, going through kind of that conversion, you know, kind of outlook that you were talking about to answer another question, where you're seeing, you know, it could possibly go from, you know, 24%-25% of the market to, you know, 50% of the market. Bryan, to your last comment about 10, you know, that this could give you some capacity to handle the next 10 years possibly. Is that to say that, you know, if we were to see, you know, would the composite transition continue for the long term? Do you feel like what you have kind of planned out here in Little Rock is, you know, sufficient to get you to that kind of range for, you know, getting closer to that 40%-50% type conversion range, or there'll be more, you know, behind it? No, I haven't put those numbers together yet, but we have a lot of property down in Little Rock, and we can add a lot of lines down there to be able to service that demand. There's also, beyond the property that we acquired, there's a significant amount of space to be able to expand within that same industrial yard. As we look at the growth opportunities, I think there are three of them that are meaningful. We've talked a lot about international. We are back to growing international more quickly than what we've been growing in North America. I expect that will continue next year. We've talked in the past a little bit about new builder programs. While we don't have enough capacity right now to really take that on wholeheartedly, we are starting to have those discussions. With the announcement of Little Rock coming on board, these take time to build out and come to the appropriate agreements. We are starting with that effort. We've got a few people on the ground, and we are engaging with the national home builders. Then the last one is cladding. Cladding has been a popular product, mostly on the West Coast, but we're starting to see that look come more east. It's been a product that we've had in the market. It's the same as our existing Transcend deck board. It's been in the market for some time, but we've not been able to fully market that due to the capacity constraints. We see a great opportunity to add incremental volume through that cladding opportunity. These are people that would be using probably a different type of siding for a different design look on the outside of their business. It is a subsegment of the overall siding industry. We'll do some more work to try to better quantify what that opportunity is over time. Awesome. Thanks for that. As a follow-up, you know, with these long-term growth plans you're describing, you know, and as you think about the raw material side of things, you know, clearly you guys have been in the recycled or scrap polyethylene game for a long time. But you know, with an outlook for strong growth and this wood to composite conversion and other products that you're kinda like what you're talking about with the cladding, you know, at what point does raw material availability become an issue? Or is there, you know, plenty out there to provide, you know, for the kind of growth we could see over the next several years, once this expansion's rolled out and the growth that's ahead? Yeah. With the growth that we've had this year to date, 37%, growing much more quickly than what the market for recycled is right now, there's some challenge in the short term. Normally, this business has been growing in the teens up to 20%, and we've been able to add to our sourcing capability in excess of those amounts every year along the way. This year, the growth has been so much higher. We've really had to look in every location possible. Our inventories are a little bit lower. We've added people onto our sourcing team, and we see the ability to be able to continue growing that and service the marketplace. All right. Thanks, guys. I appreciate you taking the questions. Thanks. Good luck. The next question is from Timothy Wojs with Baird. Please go ahead. Hey, hey, guys. Good afternoon. Nice to Hey, Tim. Good evening. Maybe just to start on the growth commentary for 2022, just trying to think about the pieces. Any sense for what, you know, pricing contribution and maybe channel inventory kind of normalization, you know, might be for 2022 as you look at next year? There's still discussions going on as to where we'll be on pricing, so I don't want to jump into that. It will be meaningful on a year-over-year basis. Dennis may be able to jump in on how much pricing comes throughout what we've already taken. Well, I mean, basically what we're trying to do with our pricing philosophy is to offset the inflationary aspects. From a year-to-date perspective, we've probably seen about 5%-6% inflation on our raw materials as a percent of sales. From a price perspective, we're pretty much right there, covering that almost from a dollar per dollar perspective. From there, what we continue to do is look for the cost outs to help us with our margins and so forth. As you think about kind of the margin composition going forward, how would you think about kind of gross profit margin leverage from here and SG&A leverage over the next couple of years? I think the key focus here will continue to be on EBITDA margin. Even with the pressures we've seen at the gross margin level, we've been able to continue to improve that EBITDA. We'll look to leverage both at the gross margin level as well as at the SG&A level. Remember, our entry-level product line doesn't carry the same level of branding. We will be increasing our branding spend next year back to more of a normalized, probably in the 5%-6% type range of sales. When you sell an Enhance Basics deck board, it doesn't carry that same level of spending along the way. We still see that opportunity to be able to leverage. Next year, there will be some of those costs coming back in again. You'll get back to a full year of normalized travel from the sales team as well as the rest of the overall Trex organization, get back to doing shows like the Builder Show, regular meetings, those sort of things, and marketing along the way. Okay. Okay, great. Good luck and our Thanks. The next question is from Jeff Stevenson with Loop Capital. Please go ahead. Hi. Thanks for taking my questions today, and congrats on the strong quarter. Thanks, Jeff. My first question is just on how much of the volume growth at the midpoint of your fourth quarter sales guidance is inventory channel fill with new industry capacity up and running? You can just update us where channel inventory levels are currently and when we might expect them to return closer to normalized levels. Yeah, it's a good follow-up, and Tim asked about that as well, too. We do see inventory build inclusive of the fourth quarter number along the way. Coming out of the third quarter, inventories were built at the retail level, both at DIY as well as in the pro channel. You could get the product, especially at the larger dealers that were out in the marketplace, as well as virtually any DIY store. If we now look at the fourth quarter, we see that I don't think inventory will get all the way back to a completely healthy level, but we are starting to see that inventory build now. Usually, you see fourth quarter come down quite a bit sequentially from the third quarter. This is still an extremely strong fourth quarter for us. The growth is quite strong in there, so there will be inventory build along the way. I can't really give you a number of that right now because it depends upon that underlying market strength. As we get into the end of the year call, we'll definitely update the market on where we stand inventory-wise and how much of that is a one-time inventory build versus underlying market growth. Okay, great. No, that's very helpful. I just wanted to ask about kind of high-level CapEx priorities in 2022. Obviously, you're doing a number of cost out projects now, and in the past, you've talked about a long runway of those, and then you're beginning your Little Rock facility in early 2022. How should we think about the progression of cost out projects next year and CapEx in general? Yeah, that's a great question. We'll certainly have more detail for you come Q1 of 2022 when we go through the earnings cycle there with you. However, you know, I think this year we plan on spending roughly between $135 million and $155 million in 2021. 2022 will clearly be less than this year as 2021 was mainly the finalization of the $200 million in capacity expansion. I'd look at 2022 as being a transition year between this capacity expansion and then Little Rock. Because as we move into 2023, you'll start to see investment in Little Rock pick up more significantly. You know, what's left in 2022 then is really debottlenecking, automation, you know, other type of cost out projects to make us more effective, more efficient. Great. That's helpful. Thanks again. The next question is from Keith Hughes with Truist. Please go ahead. You had said in the fourth quarter EBITDA contribution margin would be between 35%-40%. That probably puts you in the low 30s for the year. Obviously, you had a lot of challenges, but what do you think the kind of average contribution margin over a longer period of time looks like at this point? Yeah, I think, you know, we're clearly over time going to demonstrate leverage on the EBITDA line. You know, as SG&A today is low, we'll continue to, you know, see more and more leverage there, even though, as Bryan mentioned, that we'll see some brand spend pick up in 2022. As basics becomes a bigger part of the portfolio over time, it does not require that same level of advertising and branding spend. In addition, we're not gonna be adding people at the same rate which we're growing as well. I clearly see that EBITDA margin improving and expanding over time. Okay. One other question. As you looked your production schedules, you sort of talked about where inventory was. Do you see the beginning of 2022 as a period where you're still catching up on getting inventory in the channel, or do you think you'll be able to finish that by the end of the year? I think we'll still be putting some inventory in the channel in the first quarter of next year. The question is going to be how much. One of the things that I mentioned to our distributor partners last week is that given the size of this market today, it's important that we have inventory at all levels of the channel and make sure that our yard has what we need, their yards as well as the dealer yards, so that we're always able to have the product necessary to serve customers as we continue to convert that share. Okay, thank you. The next question is from Michael Rehaut with JP Morgan. Please go ahead. Well, thanks. Good afternoon, everyone. Thanks for taking my questions. First, I just wanted to circle back to the gross margins for a moment and just wanted to make sure I'm hearing you correctly and thinking about things in the right context. You know, you said that you're expecting some improvement sequentially in the fourth quarter, but that for next year you would expect to be above 40%. So, you know, I would presume that means that, you know, not kind of getting above 40% yet in the fourth quarter itself. And then when we talk about 2022, you know, any reason why you can't get back to like a, you know, you did 41.1% in 2019, 41.5% in 2020. Any reason you can't get back fully to that type of a level, given all the different, you know, margin improvement initiatives that you've been talking about? Well, you know, right now we are, you know, looking to step up from Q3 to Q4. Again, we'll have that full impact of the pricing increase for the three months, the additional one that Bryan talked about as well. That's gonna help us take a step up. In addition to that, we're going to continue to make progress now on our cost out initiatives as we move forward into 2022. We should start to see better absorption, as well as we have the full capacity to play out as well for us. I would expect us to be north of 40%, and we'll have more clarification moving forward. I think, you know, the more important line to be looking at too, though, is on that EBITDA margin line, right? We're gonna continue to see expansion there. In my opinion, there's no reason why we couldn't be up at that 35%-40% incrementals over the longer term. It just makes sense that we could see that sort of expansion on incrementals. Okay. I appreciate that. I guess secondly, on the SG&A, you know, you talked about, you know, expanding some marketing campaigns, maybe T&E starting to normalize. You know, obviously, it depends on you, still your rate of top line growth. You know, presuming something that's, you know, at least 15%-20% year-over-year growth, which seems like, you know, with all the capacity expansion and price increases you'd be on track to do, would you expect further leverage, in 2022, on SG&A in spite of some of those higher dollar costs, but on a% of sales, expect maybe some further, improvement, in terms of the SG&A ratio? Yeah, we're gonna have a lot more information for you on SG&A in the coming year. I think, you know, what we're trying to get across today is that we still expect to be very disciplined in our spend on SG&A. We do expect to have a leverage model. You know, Bryan has been talking about yeah we're gonna be spending more on branding going forward. But we're still going to see a lot of leverage because Basics will become a greater part of the overall portfolio, not requiring the same level of branding spend. We're not gonna be adding people at the same rate at which we're growing too. While it may tick up in absolute dollars, you know, I'm not so sure that we're gonna continue to be running this at a pretty low and lean level here for the foreseeable future. It will allow us to continue to expand margins. Can I sneak one more in if I, if possible, just on price increases? I think you mentioned that you were able to implement 5%-6% of sales this year. I thought it was something a little bit higher than that. I just wanted to make sure I heard that right. What I'm trying to get at is, you know, you've raised prices, I think, you know, at least two or three times now if you're including November. Just trying to get a sense of magnitude of each of those increases and, you know, kind of where we are, again, cumulatively, if I did hear you right. No, you did hear correctly. You know, those price increases were on most of our products, so they were not on all of those. Those were mid-single digit price increases on most products. What I'm giving you now is more of a cumulative number across the portfolio. That's, you heard correctly at 5%. All right, great. Thank you. The next question is from Phil Ng with Jefferies. Please go ahead. Hey, guys. Congrats on a really strong quarter just given all the headwinds you're seeing right now. Thanks, Phil. It'd be helpful to kind of give us a sense how full your lines are running currently, Bryan. Just want to get a better handle on your bandwidth to kind of support that strong double-digit growth. Will you be constrained until new capacity effectively comes on in 2024 via Arkansas? Well, I see continued opportunities. As we look at the first quarter, we were bringing lines up. Second quarter, we were continuing to bring lines up. We can run those at full capacity next year, depending upon what the market needs from us along the way. We haven't gotten into exactly where our utilization is at this point. We are working to increase it as we try to fill that channel inventory at this point. We did lose some revenue in the quarter. We said the same thing last quarter. We're not exactly where we want to be for the fourth quarter. We do have improvement opportunities off of our legacy lines, replacing some of the equipment, which will allow us to have further growth. These are all proven return projects that we know how to do to get more out of our existing capacity. Okay. That's helpful. You know, sorry to kind of beat a dead horse. From an inflation standpoint, should we expect to be fully caught up with the November price increase as you exit the year? If there was any disconnect on just getting incrementals back to a more normalized level in the fourth quarter, was it all price cost, or was there something else we gotta further appreciate? We've been running behind all year long, and we've continued to take price increases to be able to catch up with that. I'd love to tell you that I'm going to be there right at the end of the year. We still got 45 days left of the quarter here, and pricing on a lot of things is continuing to go up, not at the same level that we saw in late second quarter into the third quarter along the way. It sure is our intent to get caught up. At the same time, getting caught up within 30 days probably isn't the most important thing either. Having the confidence that we can take price in the marketplace, we can drive the margins that we expect, that our investors expect, is important, and we've been able to show that we can do that. Just going down to the market and saying, "I'm taking X% tomorrow because my numbers aren't there," doesn't help the market either. We've given enough time for our channel to get ready for those prices and put them through. Part of that is the relationship that we have in our channel, and that's put us a little bit behind where we would prefer to be. Okay. Super. Thank you. The next question is from Ketan Mamtora with BMO Capital. Please go ahead. Thank you, and congrats on another strong quarter. Maybe start off on the demand side. You know, I'm just curious if you're seeing more strength on the entry-level product, or is the demand growth more broad-based across your different product categories? Yeah, we're seeing that demand growth across all of our portfolio and pretty much in line with where we expected that to be. We're really pleased that, you know, having this product line up with different pricing points, it really is appealing to our large customer base. Got it. That's helpful. Just switching to the Arkansas facility and not trying to put too fine a line on it. I recognize that there is kind of a long-term plan here. Is there a way to think about how much you envision to add in 2024, 2025 in terms of capacity, in terms of your first sort of build up? I think analytically, I'll give you the keys to the analytical equation here. 70% capacity increase cost us about $200 million. We're saying about $400 million over a five-year timeframe. I think the only difference there is that we need to build out the infrastructure at that plant. There'll be a lot of utility, there'll be a lot of paving, there'll be a lot of dirt moving that we didn't have to do for that existing capacity along the way. Got it. That's very helpful. I'll turn it over. Good luck. The next question is from Reuben Garner with The Benchmark Company. Please go ahead. Thanks. Good evening, and congrats guys on the quarter and the Arkansas announcement. Thanks. Most of my questions have been answered, but I do have one kind of longer term one I wanted to sneak in. When you guys had the capacity announcements before, you know, a lot of effort and time spent by the team to do those projects in your existing facilities, and I think, you know, some of the focus with you guys being so tight was taken away from some of your continuous improvement initiatives. Would you envision this being different, you know, in a couple of years as you're kind of getting to that stage where you're able to do both because it's a, you know, a third facility, or is your existing team gonna have to kind of be used enough for the capacity additions that it may take away from those in the near term as you're building out that facility? We can do both. A key thing there is getting the engineering team to full staffing, and we've got a plan there to what we need to do to get it where we want it to be, support the new capacity. Of course, the $200 million capacity is coming off the plate at this point. The last couple of lines are going in Winchester. But we do need to beef up that group, and we can do both. Great. Thanks, guys, and congrats again. Thanks. The next question is from Kurt Yinger with D.A. Davidson. Also, if you would like to ask a question, please press star then one. Mr. Yinger, please go ahead. Great. Thanks, and good afternoon, Bryan and Dennis. Afternoon. I just wanted to start off on the dynamics between composites and wood recently. I mean, there's just been a lot of commentary from the lumber guys around sky-high pricing in the middle of the year, taking its toll on demand. As prices have moderated, it seems like the interest from the DIY consumer has come back pretty strong. I'm just curious whether you've seen any of that. I guess, play out in terms of your own demand trends and as you kind of step back and think about, you know, the two points of conversion versus one point annually in the past, you know, what are kind of the big factors that I guess might make you optimistic that this new higher rate of conversion is sustainable? I think the first important point is the futures market that we all refer to as lumber is builder quality lumber. Customers are going out buying pressure-treated lumber, which the chemicals that go into it, the labor that goes into it is all more expensive now. There is some price increase that's permanent in that type of lumber, but those prices have come back down again. I think the much more important part of the story and the strategy is that we're able to educate those buyers that there are affordable composite products. It's not just about selling an Enhance Basics board, it's showing them for an extra $200, you can move to a composite product, and then being able to move them up the spectrum of the Trex product line to give them the aesthetic and the performance that they're looking for. The company started down this path of converting against wood back in about 2017. We started advertising directly against wood. We launched Enhance in 2019, and we started to see that conversion start to pick up. We've gone, of course, through the pandemic, elevated demand, people staying at home. Over the long term, the strategy that we put together back in the 2017-2018 timeframe is unchanged, and those consumers are learning more about composites today and are enticed to purchase them. Got it. Okay. That's helpful. Then just my second on recycled film pricing. I think last quarter you talked about that being up maybe mid-teens year-over-year. Could you update us on how that's been trending the last few months and relative to maybe lagging the virgin market by a couple quarters? Are you expecting any incremental cost pressures there as we get into 2022? Yeah, I do expect to continue to see some cost pressure around that. We did see that expand, let's call it, into the high teens% in the third quarter, so those prices are still going up. Like I said, they tend to lag by about 9 months, and we're still in that 9-month lag period. We'll continue to see that move a little bit more. Okay. Appreciate the color, Bryan. Good luck in Q4 here, guys. Thanks. Thank you. The next question is from Alex Rygiel with B. Riley. Please go ahead. Thank you. Very nice quarter, gentlemen. A couple quick questions here. First, can you try to quantify the capacity that you're adding in the fourth quarter? We talked about there being an opportunity to improve by about 15%, so that would bring us, you know, from that 70% over 2019 to 85% over 2019 levels by the end of the year. That is helpful. As it relates to the Arkansas facility, could this become your low-cost manufacturing facility? If so, approximately when? We see the opportunity with Arkansas, the proximity to some of our raw materials is more optimized than our other locations. We will have some opportunity with the scale of the operations. It will eclipse at some point our Winchester facility, and so we will have some scale opportunities there. It'll be the newest technology that we have for running our products, which does give us a better cost along the way. I think that's a fair way to look at it. Offset, I mean, we think with labor, we'll have a higher labor cost across all of our facilities, but we also are looking at automation opportunities. I don't see this automation opportunity as taking away anybody's job. With the growth that we have, there will be plenty of opportunities for our existing Trex employees. As we build new capacity out, we may not need as many people to run those lines. Very helpful. Thank you. Great. Thanks, Alex. This concludes our question and answer session. I would like to turn the conference back over to Bryan Fairbanks for any closing remarks. Thanks, everybody, for your questions and attendance at today's conference call. We look forward to speaking with many of you during the quarter at conferences and other events. Thank you, and have a great evening. Bye. The conference is now concluded. Thank you for attending today's presentation. You may now disconnect.