Good morning. Welcome to the results presentation of Metair Investments Limited for the six months ended June 30, 2026. My name is Paul O'Flaherty. I am the CEO of Metair, and I am joined today by Alastair Walker, the CFO. I will provide you with a bit of an operational update for the six months, hand over to Alastair for the financial review, and then talk about some prospects for the next six months and hand over for Q&A. Just a reminder of who we are. As Metair, we are in the auto component manufacturing, as well as the Aftermarket Parts and Retail, comprising of a number of subsidiaries in South Africa, supplying to major OEMs. You can see that on the left of the screen. Toyota, Ford primarily, but also Isuzu, Volkswagen, and Mahindra. In the aftermarket division, we have a number of subsidiaries all working under a cluster, but separate from a management point of view to make sure we have channel protection. Our products go into vehicles that are exported around the world, as well as for local production, and our aftermarket presence is primarily in South Africa, but also with footprints elsewhere in Africa. If I talk about the results for the six months, our underlying earnings are stable, and as a result of our operational reset, AutoZone is recovering, and our cash conversion is a key term priority. We spoke a lot about to the market over the last two and a half years about a strategic reset. We went through the hard yards in 2024, then really looked at our operations in 2025 and made sure we had stability, made sure we closed down operations that were not profitable, looked at our profitable operations, and made sure that they were running to the full of their potential. That is substantially complete, but always subject to market conditions. Now we really are in the growth phase for Metair. Very good performance from our OEM manufacturing companies. We had a seamless model changeover with our customer without any issues, as I have been told has happened in the past at Metair. So, very, very good performance from our manufacturing units. Our OEM production levels are stabilizing, but they are at lower levels, and we will go into production for the first six months. Aftermarket, as we try and recover through AutoZone, challenging market conditions, but definitely signs of improvement, particularly towards the end of the first half. Overall, for the first six months, AutoZone is growing ahead of the market and is returning to profitability. In terms of our Rombat competition commission fine for Rombat, we have appealed that fine, and Rombat have paid the first installment of the fine of EUR 4.2 million in August of 2026. So, a very solid half- one performance from us, in terms of lower production from our OEMs, but we still managed to keep our revenue stable in this challenging environment. Our EBIT increased by 1%, with our EBIT margin in line with the prior period. Sustainable margin improvements in all of our OEM businesses other than Hesto, which had the biggest effect of the lower volumes, but excellent performance in the rest of our OEM manufacturing. Our HEPS from continuing operations increased by 4% to ZAR 0.71 per share from ZAR 0.68 per share in the prior period. Our earnings per share from continuing operations improved from a loss of ZAR 0.90 per share in the prior period to a profit of ZAR 0.70 per share. Alastair Walker will unpack that a little bit more. Really focused on our debt, really focused on EBITDA and cash flow generation, and our net debt is down from ZAR 5 billion to ZAR 4.3 billion. We successfully concluded a total refinance of our SA Obligor finance package and extended it for another five years during this period. Our cash at the end of the period up from ZAR 143 million to ZAR 620 million, and all of our debt covenants were complied with. On the right-hand side, we talk about the aftermarket, and we talk about the potential of the aftermarket. Recently, there was a survey done by the Localisation Support Fund. They did present it to the market. They were supported by EY, and you can see the size of the prize. The market size today in South Africa is estimated at ZAR 100 billion and growing. With an aging car park, that is where we see the potential for growth in our Aftermarket Parts and Retail. If I look at vehicle volumes, let us mainly look at sales. Let us start with sales. Sales of passenger and light commercial vehicles in the first six months of the year was very robust, up by 12% or 12.9% year-on-year. In June, it is the strongest SA vehicle sales performance in 19 years. However, impacted significantly by Chinese and Indian imports, and most of that growth is as a result of that. In addition, the SA vehicle exports declined 7.8% year-on-year, impacting local OEM manufacturers, and therefore, you can see the pressure on our local OEMs, and it is depicted in those production volumes, where, period- on- period, half- year last year to half- year this year, basically the stable 3,000- odd vehicles up. But for Metair, where we predominantly serve, our net vehicles are down if you look at Toyota and Ford. Despite that, we had strong, resilient results. Just a little bit on the import surge, from all the various studies done through NAAMSA and various other bodies. You can see from 2021 to 2025, the imports into the South African market going from 56%- 69% in 2025. This is not stopping and continues through the first six months of the year. Again, a lot of pressure on the OEMs in South Africa, which ultimately is a lot of pressure on Metair, and again, just talks to the resilience of this company and the good results that we have had in half one. If I look at the automotive component division specifically, as I said, local production is subdued due to the import penetration, and our localization targets, as per the South African Automotive Masterplan, are below the industry targets, putting a lot of pressure on the industry. Logistics, energy, and infrastructure constraints still hamper exports. Yes, we've seen improvements in certain parts of the infrastructure, but there's still significant issues to be dealt with. In terms of Hesto specifically, which is our flagship harness wiring operation, it's a remarkable turnaround when you think of it from 2022, 2023, and even into early parts of 2024. That turnaround continues, and significant effort that we've put into Hesto. But very exposed to those OEM volumes, and probably more exposed than others, particularly to the volumes from Ford that have gone down. Its revenue is down 17% year-on-year, and the EBIT is down by 36% year-on-year, but still a very good performance. In the other OEMs, which are more agile, more flexible, even though they've had lower revenues of 3%, their EBIT growth is 30% year-on-year, and that shows the adaptability, and the flexibility, and the focus on cost-cutting that we have introduced into the other operations. From a Metair Aftermarket Parts and Retail, it's integral to our diversification strategy. It's currently around a third of our revenue, and we've always spoken about a medium-to-long-term strategy of getting the Aftermarket Parts and Retail to 50% of our total revenue because of the pressure on the local OEMs. AutoZone, as I reported at the year-end, was trailing about six months behind the expectations, and that continues. So they haven't fallen further behind. But to the original business plan that we had when we purchased AutoZone at the beginning of 2024, we're trailing six months behind that. Total new management team in place as we announced to the market, and has started to return to profit from May of this year. So good signs, but a tough market. First Battery, we've spoken about that. Challenging market conditions, particularly with imported cheap batteries. There's a market preference for those more affordable batteries. But again, stable performance from First Battery, and we continue to monitor that operation. We did announce, as you've seen in our results, post the period end, we did have a strike in our First Battery business as we downsize, as we make sure we have the right footprint. But we've managed to settle that strike, and everything is back in operation. Our Africa growth strategy continues, particularly focusing on the Aftermarket Parts and Retail. We've appointed a permanent team in the period, and that growing, aging vehicle park still represents a very good opportunity for Metair. If I look specifically at our operational performance from a segmental point of view and the Hesto numbers, I'm not going to get into the accounting confusion for the first three months of the prior period, but if we look at Hesto, total revenue of ZAR 2.6 billion, down 17% from half one 2025, and that's the lower volumes. You've seen, in one of those previous slides, very exposed to Toyota and Ford, and with the net of those two, the volume is down. EBIT at ZAR 136 million, again, down to 36%, but if you look at the EBIT margin at 5.3% versus the half one of 6.9%, that is the challenge we have for the next period, and that is where we are really focusing on to get those EBIT margins back where we need it to be, and it is about footprint. This is about footprint. As those volumes come down, remember, this is the most people that are employed in Metair, around 7,000 people, and how do you reduce that footprint for the lower volumes? The reaction to do that is a little bit slower, but we are confident that we can get those EBIT margins back up to where they have been previously and certainly in the second part of the year. If you look at the rest of the OEMs, Smiths, Lumotech, Automould, Supreme Spring, and Unitrade, again, revenue is down because of the net down in volumes, to ZAR 3.5 billion, from the previous year of ZAR 3.6 billion. But a great performance in our EBIT, up 30% to ZAR 297 million from ZAR 228 million at a margin of 8.5%, and the half- year last year at 6.4%. We believe those are sustainable. Significant work done in those factories to get the footprint right, and significant work in how they flex and are agile to market conditions. So, great performance from that collective. In the Aftermarket Parts and Retail, if we talk to Africa Aftermarket Parts and Retail, which would be First Battery, AutoZone, ATE, and QSV and MOVE. Revenue up 6% overall to ZAR 1.9 billion from ZAR 1.8 billion, but the EBIT remained unchanged. There was a loss in AutoZone, which we have disclosed, but the last two months returned to profitability, and the EBIT margin at 2.9% period on period versus 3.1% last year. Rombat, which we now report completely separately, and Alastair will go through that in the segmental. Revenue down by 21% to ZAR 955 million. Tough conditions in the European market. They have been more affected by the Middle Eastern issues than possibly we have down here. So revenue down, and EBIT slightly down, but their margins, significant improvement in their margins to 5.4%. So very strong performance by Rombat in very trying conditions as they go forward. I will now hand over to Alastair. Thanks, Paul. Good morning, ladies and gentlemen. Give me great pleasure to present the results for the first half of FY 2026. As Paul mentioned, overall, a pleasing performance in a challenging period, which was evidenced by lower volumes in one key customer and a model changeover in another key customer, but which was seamlessly executed on. So despite these challenges, the group delivered a solid performance due to the rightsizing and restructuring initiatives which commenced in 2024 to ensure that the business remains agile and adaptable to the market conditions and customer shifts. When reviewing these results, it is worth noting the change in accounting treatment and the consolidation of Hesto Harnesses with effect from the 1st of April 2025, which impacts the comparable period and should be borne in mind when reviewing the results. The group delivered a slight increase in revenue of 1% to ZAR 8.5 billion for the six months. EBITDA was up 8% to ZAR 760 million, and EBIT was up 1% to ZAR 444 million versus ZAR 439 million in the prior period. Group net debt was ZAR 4.3 billion at period end versus ZAR 5 billion for the comparable period. Net debt comprises ZAR 4.9 billion of gross debt, less net cash of ZAR 620 million at the period end. The group's cash flow is fairly cyclical, with significant outflows in the first half and liberation of cash in the second half due to the working capital cycle, mainly in the OEM businesses. We are pleased with the cash balance at the half, as this compares to ZAR 143 million at June 2025, which represents a significant improvement versus our comparable period. Headline earnings per share from continuing operations rose to ZAR 0.71 per share, which compares to ZAR 0.68 per share in the prior period, which again demonstrates the operational stability in the business being a key feature as the benefits of the rightsizing and restructuring, which commenced in 2024, continued to buffer the volume volatility. ROIC, which is our key performance metric, increased to 11.2% from 11.1% at the end of FY 2025, which again reflects the stable operational performance in the period. Our reporting segments are the OEM segment, which supplies components directly to the original equipment manufacturers, and the Aftermarket Parts and Retail, or AFM segment, which primarily serves the independent aftermarket and retail distribution channels. This period, we've also elected to split out Rombat within aftermarket to show its results separately from the rest of AFM Africa. Rombat is a separate debt obligor and is managed independently from the rest of the business. The OEM segment highlights. OEM production volumes were stable in the period, up 1% versus the comparable period. Despite the stable volume growth, the EBIT increased 12%, resulting from the benefits of those restructuring initiatives which we've spoken about. Hesto, as Paul mentioned, was adversely impacted by the lower volumes at one of the key customers, and Hesto's revenue and EBIT is down 17% and 36% respectively versus the prior period. The remaining OEM businesses grew EBIT by 30% period on period and improved that EBIT margin from 6.4%- 8.5% due to the effect of those operational improvement initiatives. On the AFM side, we've split it into AFM Africa and Rombat, as I mentioned. AFM Africa reflected revenue up by 6%, mainly AutoZone, but flat EBIT period on period. As Paul mentioned, AutoZone incurred losses, but which were reduced modestly from ZAR 24 million in the prior period to ZAR 21 million in this half. AutoZone is trailing about six months behind its original recovery plan. Within the AFM Africa, First Battery delivered a solid performance with EBIT increasing about 4% to ZAR 82 million, with battery volumes increasing about 5,000 units period on period, which is a good performance in a very challenged market. Rombat had a solid first half despite the lower revenue due to input cost containment. Turning to the cash flow bridge for the half. Please note again, like we did in the segmental report, we've separated Rombat out from all figures and shown it separately. The group ex Rombat generated ZAR 697 million from cash from operations and invested ZAR 493 million into working capital for the period. As I've mentioned, the group is quite cyclical in terms of its working capital cycle, with an investment in working capital in the first half of each fiscal as the factories start up at the beginning of the year, but a liberation of working capital which turns to cash in the second half as the factories close in early December. This is evidenced by the group's cash balance of ZAR 1.2 billion at the end of 2025, compared to ZAR 620 million at the end of June 2026. We remain very focused on the inventory levels. This focus is evidenced by a moderate investment of ZAR 39 million into inventory in the first half, despite the volatility from the U.S.-Iran conflict, which is impacting global supply chains. The investment into receivables is higher due to higher volumes in June. April and May were slower months with a model changeover, but June was a very strong month, reflecting higher sales volumes and higher receivables as a result. Trade and other payables increased by ZAR 339 million, partially offsetting the receivables build as production volumes ramped up in June. During the period, the group paid interest of ZAR 307 million and tax of ZAR 50 million. Investing activities comprise CapEx of ZAR 244 million, offset by interest received of ZAR 25 million. The CapEx for FY 2025 and FY 2026 remains elevated due to the required investment to prepare for the model changeover that happened in the first half of the year. Finally, the group had a net outflow of ZAR 167 million from the financing activities, which reflects debt repayments and lease payments of ZAR 102 million for the period. Rombat cash flow, which is separately shown on the right-hand side, reflects cash generated from operations of ZAR 68 million, less investments into working capital of ZAR 85 million and CapEx of ZAR 12 million, with outflows for tax and debt-related repayments of ZAR 40 million in aggregate. Turning to the debt structure slides. As we've mentioned before, the group is managed in three separate ring-fenced debt obligors. SA Obligor, which comprises all the South African assets except Hesto. Hesto as a separate obligor, and Rombat. Just to note, there's no link between the South African obligor groups and Rombat. During the period under review, the group successfully executed a refinance of the group's SA Obligor borrowings of ZAR 3.3 billion and consolidated the debt with one lender, being Standard Bank. The objective of the SA Obligor refinance was to align the term of the debt with the forecast earnings and cash flow generation and to remove the ZAR 1.6 billion Facility C repayment previously due in June 2027. Important to note, the EBITDA trigger per the previous debt construct, which required the group to meet cumulative EBITDA targets, failing which an asset sale or rights offer is required, has also been removed as part of this refinance. The new debt terms include a ratchet down of the interest rate as the SA Obligor delevers, so we remain principally focused on deleveraging to reduce the interest payments through a reduced debt quantum and also lower rates as the leverage ratio improves. Separately, we are renegotiating the Hesto debt package to consolidate the debt with Standard Bank. We are in the final stages of the Hesto refinance and expect completion shortly. As Paul has mentioned, all covenant and debt requirements were met in the period. This slide reflects the group's total repay. The top table reflects SA Obligor and indicates the refinancing has successfully pushed out the majority of the maturities to FY 2031. The facilities contain leverage-based pricing ratchets, as I've mentioned on the previous slide, meaning the interest costs reduce as our debt levels decrease. This creates the double benefit from a debt reduction through both lower debt balances and lower margins, which is why EBITDA, free cash flow generation, and debt reduction remain our number one priority. In addition, we have negotiated with Standard Bank to classify the loans as sustainability-linked loans, which, subject to meeting certain sustainability KPIs, will see further margin benefit. This slide sets out our capital allocation and commitments for the second half of the year. The top left part of the slide indicates the CapEx spent in the first half, which amounted to ZAR 244 million, split between maintenance of ZAR 60 million and expansion and project-related CapEx of ZAR 172 million, plus Rombat's CapEx of ZAR 12 million. As we have highlighted before, the CapEx for FY 2026 will be higher than normal at around ZAR 733 million for the year, covering maintenance and project CapEx. Project CapEx relates mainly to the investment for the new model changeover. We do expect total CapEx to moderate to between ZAR 400 million and ZAR 450 million per annum from FY 2027 onwards. On the right-hand part of the slide, we reflect the ROIC, which is our key performance metric. ROIC is 11.2% at June 2026, slightly up from December 2025 due to the operational and financial stability in the period. Historically, ROIC has tracked volumes, as evidenced by the lower ROIC in FY 2024 following the Toyota engine certification issues in Europe. But the recovery came through in the ROIC in FY 2025. We do expect the ROIC volatility to be less going forward as we diversify our revenues and our earnings through the increased exposure to the aftermarket segment. We remain intensely focused on disciplined capital allocation for investments in CapEx as well as working capital. ROIC is our key metric for all OpEx, working capital, and CapEx deployment. We also analyze return on assets, IRR, and payback to ensure that investments meet the appropriate return requirements. Thank you. Thanks, Alastair. What do we expect over the next six months as Metair? Obviously, as reported previously, as you would read in the media, and is highlighted on a regular basis, the automotive sector is at a critical crossroads, and strategic government decisions are pivotal, working with the industry. Government is re-looking at the APDP2 and the South African Automotive Masterplan itself. Close collaboration is needed by all the industry stakeholders to make sure that we can create the secure platform for the automotive industry going forward. Specifically, in the OEM market, you saw the higher volumes from Toyota, and they're expecting slightly higher increases for the second half. There's been very strong demand for the new Toyota Hilux model. Ford volumes are lower, as we had indicated at the full year, but we expect them to be stable going forward for the ne xt six months. The margins we have reported, we believe, are very sustainable in the OEMs in the manufacturing companies for the next six months. AutoZone remains an absolute near-term priority. There are definitely signs of improvement in the general aftermarket. If we look at trading sales per day, AutoZone is growing ahead of the market, and we continue to focus on that. Yes, six months behind, new management team in place, and we are confident for the next six months that we can show the turnaround at AutoZone. Our diversification strategy continues to grow that aftermarket parked component. There is an aging vehicle park in South Africa, but also in the rest of Africa, and reduce our dependence on new vehicle production. A lot of stress in that sector. It does not mean we are walking away from that sector. It remains critical to Metair, but we have to diversify. As I said, the African aftermarket provides growth opportunities for us beyond South Africa. New team in place, strategy signed off, and opportunities identified. Thank you very much. I will now hand over for the Q&A. Thank you very much, Paul. We will go to the questions on the webcast. The first question is from [Esayon] at ProfitWorks. The question is for Alastair. Despite strong cash generation before working capital, receivables absorbed ZAR 779 million in H1. How much of this is timing- related and expected to unwind in H2? What level of free cash flow and net debt reduction should we expect by year-end? Sorry, what was the last part, Trey? What level of free cash flow and net debt reduction should we expect by year-end? Okay. Perhaps if I can just answer the second part. As reflected in last year, if you look at FY 2025, there was a substantial investment in working capital in the first half of ZAR 843 million. Our cash balance at the end of June 2025 was ZAR 143 million. The cash balance at the end of the year was ZAR 1.2 billion. There is a substantial increase in the cash in the second half that is due to the natural working capital cycle. To answer the first part of the question, the significant investment in receivables in the first half at the end of the period, a large part of that is timing- related because the volumes in June were high after slower volumes in April and May. Due to the model changeover, there was a bit of a slowdown in volumes, but there was a significant volume pickup in June, and that has really resulted in a large part of that trade receivables. Just to note that the trade receivables include contract assets, so the IFRS 15 adjustment comes through there as well. But we do expect the working capital as a whole to moderate in the second half, and the categorization between it will largely be timing- related between receivables, between payables, and inventory. I think what is notable is our focus on inventory, which you can also see through the moderate investment in inventory. So we track inventory quite cautiously, but we expect a liberation from the working capital in the second half of the year. Okay, thanks, Alastair. The second question is also from [Esayon] at ProfitWorks. This question is for Paul. With the falling share of locally produced vehicles, what opportunities are Metair pursuing to become a localization partner to the new OEM entrants, and when can these customers become material contributors to revenue? Yeah, there's substantial talk in the market, and activity in the market for new entrants. We've seen Mahindra a number of years back enter the market, and we already service Mahindra through Supreme Springs. There's additional activity going on with all of our other manufacturers to see if we could supply to Mahindra and its requirements. We did, a couple of years back or 18 months back, have a lot of engagements with Stellantis, but those have kind of petered out a little bit, and we're not seeing a lot of movement. The most active at the moment, in looking at the market and dealing with our manufacturing and looking for RFQs, is Chery. We continue to engage with them, trying to understand what their levels of investment, are they going CKD, SKD, where they're going. We're very active. Our OEM manufacturers know that they've got spare capacity, and they continue to engage with any new entrants in our market. Key decisions required from government, we believe, going forward, like the rest of the industry in how companies are incentivized to set up for full CKD in South Africa because that improves the localization opportunity. Thank you, Paul. A question from Mihai at [SE Architectura]. When will Metair engage in lithium-ion batteries, and/or when will Metair produce an EV? Lithium-ion is not in the strategy for Metair at this stage. It was a previous strategy that unfolded through 2018, 2019 with Mutlu and Rombat and the others. It's not part of the strategy at the moment. Metair doesn't produce EVs. We produce the parts for EVs. We're totally dependent on our OEM manufacturing companies to do that transition. They prefer to use it as NEVs and not just EVs specifically. We've seen movements like Ford producing the PHEV for the Ranger, so we supply the parts to that. As and when the OEMs in the country evolve, Metair is ready and able to supply the parts that are required for NEV vehicles, yeah. Question from Rowan Goeller at Chronux Research: What are your expectations for Toyota volumes, and could they make up for the Ford decline? As we indicated, the Hilux has been a very successful launch. You've seen the volumes of Toyota in the first six months. We think that they can at least match that in the second six months, with maybe a little bit more. As I said, the Ford volume decrease that you've seen, we expect that now to stabilize. So year-on-year, there will be that decrease overall that we spoke about at the year-end. Another question from Rowan Goeller. What margin expectations do you now have for AutoZone now that you have operated for a while? I think, if we look at the competitors of AutoZone, if we look at the intent and the reason for buying AutoZone, ultimately, when we complete this turnover, when we get AutoZone back to the revenues that we spoke about, we expect 5.5% PBIT margins from AutoZone, and that's what the competitors are doing. So that's definitely something in the medium term that we need to push AutoZone for. Thanks. Question from Irma Venter at Engineering News. Do you get the sense that the OEMs have a workable plan to counter the drop in production volumes? Will a cut in ad valorem tax aid locally made vehicle sales? Yeah, they certainly have a plan. A lot of the OEMs are very outspoken in the market, rightfully so, giving indications of what's required. I do not believe they just sit back and accept the status quo. Obviously, they are very dependent. They have motherships overseas that own them, with many production facilities around the world. The point for this industry is to remain really relevant in global terms. The 1% of total global production remains a goal for South Africa, and we all need to work together to be cost- competitive, to unlock all of the infrastructure issues that maybe hamper what we try and do. We are in this together with the OEMs, and we are very confident that certainly over the medium term, we can get back to the position where South Africa intended. Thanks. Question from Na'ilah Ebrahim at News24: What is the outlook for Ford in terms of production going forward, and how will Hesto respond to this? Yeah, I think we have said there that Ford, you have seen that volume decrease. We expect their volumes now to remain stable for the second six months. We had predicted that. We called that out at the year-end. Hesto is just about productivity. Big labor force, making sure that we built a very large factory for Ford, as you all know, for a lot of volumes. So making sure that we can reduce the labor force, get more productivity out of the labor force, that is what Hesto is about. We are confident in the second six months. With a real focus on the Ford part of the factory, we run Hesto in three factories, that we can see a good turnaround in the Ford part of the factory for Hesto. Thanks. Just a follow-up question on some questions I think have been addressed already and answered, but there's an additional angle here, also from Na'ilah Ebrahim. With OEM volumes decreasing, what does the plan look like for Metair to consolidate its component manufacturing operations? Will there be a decrease in headcount or other forms of consolidation? We have done a lot over the two and a half years since I've been here. We've closed loss-making factories. We've closed loss-making divisions of certain of our OEM manufacturers. We've consolidated in terms of, as an example, our injection molding capabilities between Automould and Lumotech. We've consolidated the management of our wiring divisions, which is the Hesto and the Unitrade. We've put shared services across the group. We look at group procurement to reduce. All the levers that you would do in a turnaround and a restructuring are well underway or completed. We'll continue to squeeze that cost base. We did have the strike, as I announced, at First Battery, and unfortunately, we had to release 120 people through that, but that's about the footprint reduction. We're not scared to adapt to the market conditions and do what we need to do because the whole needs to survive, and we need to generate the EBITDA and the cash flow to pay the debt. We've done a lot. As market conditions change, hopefully improve, but as they change, we will continue to look at how we restructure our operations. A question from Rajar Ambekar at Excelsia Capital. On Hesto, why were costs not flexed down as the Ford volume drop was expected? The Ford volumes, we announced that conversations with Ford were happening in October and November last year. I would suggest, not facetiously, to anybody who is in business, to reduce from a 7,000 workforce down to another type of level takes time. You do not just switch buttons on and off. A lot of attention around that. We think we have a bit more to go. We have done a lot of, certainly through April through June, in the reduction in the Ford specifically. Remember, we have had good movement in Toyota, so moving people across and training them up in the Toyota way is also part of the plan. We will continue to really look at that cost base in Ford over the next six months. Another question from Rajar at Excelsia regarding AutoZone. With the ZAR 21 million loss for the first half, do you think you can reach break- even for the full year? Please provide some comments on the post-period in trading. Yes. We certainly believe that is our target, to reach break- even for the first year. The momentum in sales from May and June has continued. The team is looking at the profitability of every store, what we need to reduce. We have a concept called Project Boost, which is a renovation behind every one of the retail stores. Our QSV is flying, right? But QSV goes at lower margins. We now need to continue that momentum through into the retail stores, and it is something on top of all of our minds. That new team started to be appointed from February with the lead, and then from April, May. So they have had three, four months at it now, and so we are very confident in their ability. Andrew Bishop at Excelsia Capital. Please could you talk more about the good margin performance in OEMs, excluding Hesto and Rombat, despite low revenue? Yeah. What is the outlook for margins for Hesto? You noted improved margin in half two going forward. Yeah. We certainly want to, for Hesto, get it back to what we did last year at the 6.5%. That is on the cards, and we certainly want to sustain the margins you saw for the rest of the OEMs for the second half. That has just been a tremendous performance. They have learned how to flex. They have learned how to be agile. There has been a lot of pressure on their cost base, a lot of pressure on their value streams, and man and machine. Just a great performance. Also merging management teams together, doing the same thing with less people. That has helped. So very confident in those management teams and what they actually do. Another question from Rowan Goeller at Chronux Research. What are your expectations for finance cost reduction over the next three years? Yeah. As I mentioned, the refinanced package includes interest rate reductions. So there are leverage levels, and the interest rate should reduce as we meet those lower leverage levels. There are lower leverage ratios, so we will start to de-gear. There is a quantum of capital that is required to be paid as well, before we get into those interest rate resets. I think over the next three years, we should see a decent reduction in the overall interest cost by virtue of lower debt quantum as we start to de-gear, especially from next year, FY 2026, as the CapEx moderates, as well as then the lower interest rates, which should then also take some pressure off that interest bill. Thank you. A question from Thabo at Capitec. VW will start the production of Taigo next year in 2027 at Kariega. Is Metair participating in the Taigo program? Yes, 100%. We are participating for those levels of the component parts that are changing, and that we have always been part of the journey. There is obviously some of the parts of those cars that we are not, because we are not with the design partners, but absolutely, we participate. Thanks, Paul. A question here from Tashus, no company name. It looks like two different questions. Can you comment on the quality of the debtors book? Can you comment on serving the parts market for Chinese cars? You want to do the debtors book? Yeah, sure. Thanks for the question. The debtors book: our customers, a large part of our customer base, as was indicated on the slides, is global OEMs. Very, very strong credit ratings. So that reflects in our debtors book and the quality of our debtors book. We obviously analyze it, we look at the aging, et cetera. So, we feel very comfortable that the debtors book and the quality thereof is strong. Aftermarket parts. The win here, the key here in aftermarkets, with or without Chinese cars, is to understand the cars on the road. It is as basic as that. What are the numbers? What are the registered vehicles? Where are those registered vehicles? What is the proximity of them? Then, analyzing every single vehicle on the road, and what are the component parts that are in that vehicle, and what are the parts that AutoZone wants to play in? We do not play in all of the parts of a vehicle. So all of that data, all of that research is there. As and when the Chinese cars become more of the landscape, we understand where those cars, understanding where they are, understanding the component parts that are required. So absolutely, we adjust the model accordingly and make sure we can serve as required. Thank you, Paul. That concludes the questions from the webcast. Great. Thank you very much, everybody.